#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+#
+# This file is part of Lustre, http://www.lustre.org/
#
+# lustre/tests/auster
+#
+# Drive lustre tests
+#
+
#
-# auster - drive lustre tests
# TODO
# 1. --time-limt <seconds> add per test time limit, kill test if it runs to long
# 2. Read list of tests to run from a file. same syntax as cli, but one test per line
# 3. Run test on remote node
-# 4. Use long opts for auster options
+#
set -e
export TF_SKIP=/tmp/tf.skip
usage() {
- less -F <<EOF
+ less -F <<EOF
Usage ${0##*/} [options] suite [suite options] [suite [suite options]]
Run Lustre regression tests suites.
- -c CONFIG Test environment config file
- -d LOGDIR Top level directory for logs
- -D FULLLOGDIR Full directory for logs
- -f STR Config name (cfg/<name>.sh)
- -g GROUP Test group file (Overrides tests listed on command line)
- -S TESTSUITE First test suite to run allows for restarts
- -i N Repeat tests N times (default 1). A new directory
- will be created under LOGDIR for each iteration.
- -k Don't stop when subtests fail
- -R Remount lustre between tests
- -r Reformat (during initial configuration if needed)
- -s SLOW=yes
- -v Verbose mode
- -l Send logs to the Maloo database after run
- (can be done later by running maloo_upload.sh)
- -h This help.
+ -c, --config CONFIG Test environment config file
+ -C, --client-only Run client-side sanity tests against an already setup
+ filesystem. Users must define FSNAME and mgs_HOST manually.
+ -d, --log-dir LOGDIR Top level directory for logs
+ -D, --full-log-dir FULLLOGDIR Full directory for logs
+ -f, --cfg-name STR Config name (cfg/<name>.sh)
+ -g, --group GROUP Test group file (Overrides tests listed on command line)
+ -S, --suite TESTSUITE First test suite to run allows for restarts
+ -H, --honor Honor the EXCEPT and ALWAYS_EXCEPT list when --only is used
+ -i, --repeat N Repeat tests N times (default 1). A new directory
+ will be created under LOGDIR for each iteration.
+ -k --no-stop Don't stop when subtests fail
+ -R, --remount Remount lustre between tests
+ -r, --reformat Reformat (during initial configuration if needed)
+ -s --slow SLOW=yes
+ -v, --verbose Verbose mode
+ -l, --send-logs Send logs to the Maloo database after run
+ (can be done later by running maloo_upload.sh)
+ -L, --lang Script language of test suite. Default: bash
+ -N, --no-setup No setup. Do not setup Lustre prior to executing test suite.
+ -h, --help This help.
Suite options
These are suite specific options that can be specified after each suite on
auster -f large -g test-groups/regression -i 5
+Run the client-only tests from sanity.
+
+ FSNAME=myfilesystem mgs_HOST=1.2.3.4 auster -C sanity
+
EOF
- exit
+ exit
}
dry_run=false
repeat_count=1
upload_logs=false
reformat=false
+script_lang=bash
test_logs_dir=/tmp/test_logs/$(date +%Y-%m-%d)/$(date +%H%M%S)
-export ${SLOW:=no}
-export ${NAME:=local}
-while getopts "c:d:D:nkf:S:g:i:rRslhv" opt
+export HONOR_EXCEPT=
+export do_setup=true
+export client_tests_only=false
+export "${SLOW:=no}"
+export "${NAME:=local}"
+
+# Replace long option with corresponding short option
+for arg in "$@"; do
+ shift
+ case "$arg" in
+ --config) set -- "$@" '-c';;
+ --client-only) set -- "$@" '-C';;
+ --log-dir) set -- "$@" '-d';;
+ --full-log-dir) set -- "$@" '-D';;
+ --group) set -- "$@" '-g';;
+ --suite) set -- "$@" '-S';;
+ --no-stop) set -- "$@" '-k';;
+ --verbose) set -- "$@" '-v';;
+ --honor) set -- "$@" '-H';;
+ --repeat) set -- "$@" '-i';;
+ --cfg-name) set -- "$@" '-f';;
+ --remount) set -- "$@" '-R';;
+ --reformat) set -- "$@" '-r';;
+ --slow) set -- "$@" '-s';;
+ --send-logs) set -- "$@" '-l';;
+ --lang) set -- "$@" '-L';;
+ --no-setup) set -- "$@" '-N';;
+ --help) set -- "$@" '-h';;
+ *) set -- "$@" "$arg";;
+ esac
+done
+
+while getopts "c:Cd:D:nkf:S:g:Hi:rRslL:Nhv" opt
do
- case "$opt" in
- c) export CONFIG=$OPTARG;;
- d) test_logs_dir=$OPTARG/$(date +%Y-%m-%d)/$(date +%H%M%S);;
- D) test_logs_dir=$OPTARG;;
- g) test_group_file=$OPTARG;;
- S) FIRST_SUITE=$OPTARG;;
- k) export FAIL_ON_ERROR=false;;
- n) dry_run=:;;
- v) verbose=:;;
- i) repeat_count=$OPTARG;;
- f) NAME=$OPTARG;;
- R) do_reset=:;;
- r) reformat=:;;
- s) export SLOW=yes;;
- l) upload_logs=true;;
- h|\?) usage;;
- esac
+ case "$opt" in
+ c) export CONFIG=$OPTARG;;
+ C) client_tests_only=true;;
+ d) test_logs_dir=$OPTARG/$(date +%Y-%m-%d)/$(date +%H%M%S);;
+ D) test_logs_dir=$OPTARG;;
+ g) test_group_file=$OPTARG;;
+ S) FIRST_SUITE=$OPTARG;;
+ k) export FAIL_ON_ERROR=false;;
+ n) dry_run=:;;
+ v) verbose=:;;
+ H) export HONOR_EXCEPT="y";;
+ i) repeat_count=$OPTARG;;
+ f) NAME=$OPTARG;;
+ R) do_reset=:;;
+ r) reformat=:;;
+ s) export SLOW=yes;;
+ l) upload_logs=true;;
+ L) script_lang=$OPTARG;;
+ N) do_setup=false;;
+ h|\?) usage;;
+ esac
done
# If a test_group_file is specified, then ignore rest of command line
shift $((OPTIND -1))
fi
-#
-# Various paramters for the tests scripts
-#
-#: ${SIZE:=$((RAMKB * 2))}
-#: ${RSIZE:=512}
-#: ${UID:=1000}
-#: ${MOUNT=/mnt/lustre}
-#: ${MOUNT2:=${MOUNT}2}
-#: ${COUNT:=1000}
-#: ${TMP:=/tmp}
-
reset_lustre() {
if $do_reset; then
stopall
. $LUSTRE/tests/test-framework.sh
init_test_env
+# Set CLIENTONLY, while trying to discover some common
+# variables so the test runner doesn't need do this
+# manually
+if $client_tests_only; then
+ export CLIENTONLY=true;
+ export FSTYPE=${FSTYPE:-ldiskfs};
+ export MDSCOUNT="$(( $($LFS mdts | wc -l) - 1 ))"
+ export OSTCOUNT="$(( $($LFS osts | wc -l) - 1 ))"
+fi
+
print_summary () {
trap 0
local form="%-13s %-17s %s\n"
setup_if_needed() {
+ ! ${do_setup} && return
nfs_client_mode && return
AUSTER_CLEANUP=false
rm -f $TF_FAIL
touch $TF_SKIP
local start_ts=$(date +%s)
- doit bash $suite_script
+ doit $script_lang $suite_script
local rc=$?
local duration=$(($(date +%s) - $start_ts))
[[ ! -f $TF_SKIP ]] || rm -f $TF_SKIP
reset_lustre
+
+ return $rc
}
run_suite_logged() {
- local suite_name=${1%.sh}
- local suite=$(echo ${suite_name} | tr "[:lower:]-" "[:upper:]_")
+ local suite_name=${1%.sh}
+ local suite=$(echo ${suite_name} | tr "[:lower:]-" "[:upper:]_")
- suite_script=$(find_script_in_path $suite_name $LUSTRE/tests)
+ suite_script=$(find_script_in_path $suite_name $LUSTRE/tests)
- if [[ -z $suite_script ]]; then
- echo "Can't find test script for $suite_name"
- return 1
- fi
+ if [[ -z $suite_script ]]; then
+ echo "Can't find test script for $suite_name"
+ return 1
+ fi
- echo "run_suite $suite_name $suite_script"
- local log_name=${suite_name}.suite_log.$(hostname -s).log
- if $verbose; then
- run_suite $suite_name $suite_script 2>&1 |tee $LOGDIR/$log_name
- else
- run_suite $suite_name $suite_script > $LOGDIR/$log_name 2>&1
- fi
+ echo "run_suite $suite_name $suite_script"
+ local log_name=${suite_name}.suite_log.$(hostname -s).log
+ if $verbose; then
+ run_suite $suite_name $suite_script 2>&1 |tee $LOGDIR/$log_name
+ else
+ run_suite $suite_name $suite_script > $LOGDIR/$log_name 2>&1
+ fi
+ return ${PIPESTATUS[0]}
}
#
shift;
export ONLY=$(split_commas $1)
opts+="ONLY=$ONLY ";;
+ --suite)
+ shift;
+ export SUITE=$(split_commas $1)
+ opts+="SUITE=$SUITE ";;
+ --pattern)
+ shift;
+ export PATTERN=$(split_commas $1)
+ opts+="PATTERN=$PATTERN ";;
--except)
shift;
export EXCEPT=$(split_commas $1)
export NAME MOUNT START CLEAN
. ${CONFIG:-$LUSTRE/tests/cfg/$NAME.sh}
-assert_env mds_HOST
-assert_env ost_HOST OSTCOUNT
-assert_env FSNAME MOUNT MOUNT2
+# Only need to know where (MOUNT) and how (mgs_HOST) to
+# mount Lustre for client-side only tests
+if $client_tests_only; then
+ assert_env mgs_HOST
+else
+ assert_env mds_HOST
+ assert_env ost_HOST OSTCOUNT
+ assert_env MOUNT2
+fi
+
+assert_env FSNAME MOUNT
echo "Started at `date`"
setup_if_needed