/* -*- mode: c; c-basic-offset: 8; indent-tabs-mode: nil; -*-
* vim:expandtab:shiftwidth=8:tabstop=8:
*
- * lustre/lvfs/lvfs_lib.c
- * Lustre filesystem abstraction routines
+ * GPL HEADER START
*
- * Copyright (C) 2007 Cluster File Systems, Inc.
- * Author: Andreas Dilger <adilger@clusterfs.com>
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
- * This file is part of Lustre, http://www.lustre.org.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 only,
+ * as published by the Free Software Foundation.
*
- * Lustre is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 for more details (a copy is included
+ * in the LICENSE file that accompanied this code).
*
- * Lustre is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public License
+ * version 2 along with this program; If not, see
+ * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf
*
- * You should have received a copy of the GNU General Public License
- * along with Lustre; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
+ * CA 95054 USA or visit www.sun.com if you need additional information or
+ * have any questions.
+ *
+ * GPL HEADER END
+ */
+/*
+ * Copyright 2008 Sun Microsystems, Inc. All rights reserved
+ * Use is subject to license terms.
+ */
+/*
+ * This file is part of Lustre, http://www.lustre.org/
+ * Lustre is a trademark of Sun Microsystems, Inc.
+ *
+ * lustre/lvfs/lvfs_lib.c
+ *
+ * Lustre filesystem abstraction routines
+ *
+ * Author: Andreas Dilger <adilger@clusterfs.com>
*/
#ifdef __KERNEL__
#include <linux/module.h>
#include <liblustre.h>
#endif
#include <lustre_lib.h>
+#include <lprocfs_status.h>
unsigned int obd_fail_val = 0;
unsigned long obd_fail_loc = 0;
obd_memory_sum(),
obd_pages_sum() << CFS_PAGE_SHIFT,
obd_pages_sum(),
- atomic_read(&libcfs_kmemory));
+ cfs_atomic_read(&libcfs_kmemory));
return 1;
}
return 0;
int __obd_fail_check_set(__u32 id, __u32 value, int set)
{
- static atomic_t obd_fail_count = ATOMIC_INIT(0);
+ static cfs_atomic_t obd_fail_count = CFS_ATOMIC_INIT(0);
LASSERT(!(id & OBD_FAIL_ONCE));
if ((obd_fail_loc & (OBD_FAILED | OBD_FAIL_ONCE)) ==
(OBD_FAILED | OBD_FAIL_ONCE)) {
- atomic_set(&obd_fail_count, 0); /* paranoia */
+ cfs_atomic_set(&obd_fail_count, 0); /* paranoia */
return 0;
}
/* Skip the first obd_fail_val, then fail */
if (obd_fail_loc & OBD_FAIL_SKIP) {
- if (atomic_inc_return(&obd_fail_count) <= obd_fail_val)
+ if (cfs_atomic_inc_return(&obd_fail_count) <= obd_fail_val)
return 0;
}
/* Fail obd_fail_val times, overridden by FAIL_ONCE */
if (obd_fail_loc & OBD_FAIL_SOME &&
- (!(obd_fail_loc & OBD_FAIL_ONCE) || obd_fail_val <= 1)) {
- int count = atomic_inc_return(&obd_fail_count);
+ (!(obd_fail_loc & OBD_FAIL_ONCE) || obd_fail_val <= 1)) {
+ int count = cfs_atomic_inc_return(&obd_fail_count);
if (count >= obd_fail_val) {
- set_bit(OBD_FAIL_ONCE_BIT, &obd_fail_loc);
- atomic_set(&obd_fail_count, 0);
+ cfs_set_bit(OBD_FAIL_ONCE_BIT, &obd_fail_loc);
+ cfs_atomic_set(&obd_fail_count, 0);
/* we are lost race to increase obd_fail_count */
if (count > obd_fail_val)
return 0;
if ((set == OBD_FAIL_LOC_ORSET || set == OBD_FAIL_LOC_RESET) &&
(value & OBD_FAIL_ONCE))
- set_bit(OBD_FAIL_ONCE_BIT, &obd_fail_loc);
+ cfs_set_bit(OBD_FAIL_ONCE_BIT, &obd_fail_loc);
/* Lost race to set OBD_FAILED_BIT. */
- if (test_and_set_bit(OBD_FAILED_BIT, &obd_fail_loc)) {
+ if (cfs_test_and_set_bit(OBD_FAILED_BIT, &obd_fail_loc)) {
/* If OBD_FAIL_ONCE is valid, only one process can fail,
* otherwise multi-process can fail at the same time. */
if (obd_fail_loc & OBD_FAIL_ONCE)
}
EXPORT_SYMBOL(__obd_fail_check_set);
+int __obd_fail_timeout_set(__u32 id, __u32 value, int ms, int set)
+{
+ int ret = 0;
+
+ ret = __obd_fail_check_set(id, value, set);
+ if (ret) {
+ CERROR("obd_fail_timeout id %x sleeping for %dms\n",
+ id, ms);
+ cfs_schedule_timeout_and_set_state(CFS_TASK_UNINT,
+ cfs_time_seconds(ms) / 1000);
+ cfs_set_current_state(CFS_TASK_RUNNING);
+ CERROR("obd_fail_timeout id %x awake\n", id);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(__obd_fail_timeout_set);
+
+#ifdef LPROCFS
+void lprocfs_counter_add(struct lprocfs_stats *stats, int idx,
+ long amount)
+{
+ struct lprocfs_counter *percpu_cntr;
+ int smp_id;
+
+ if (stats == NULL)
+ return;
+
+ /* With per-client stats, statistics are allocated only for
+ * single CPU area, so the smp_id should be 0 always. */
+ smp_id = lprocfs_stats_lock(stats, LPROCFS_GET_SMP_ID);
+
+ percpu_cntr = &(stats->ls_percpu[smp_id]->lp_cntr[idx]);
+ cfs_atomic_inc(&percpu_cntr->lc_cntl.la_entry);
+ percpu_cntr->lc_count++;
+
+ if (percpu_cntr->lc_config & LPROCFS_CNTR_AVGMINMAX) {
+ /* see comment in lprocfs_counter_sub */
+ LASSERT(!cfs_in_interrupt());
+
+ percpu_cntr->lc_sum += amount;
+ if (percpu_cntr->lc_config & LPROCFS_CNTR_STDDEV)
+ percpu_cntr->lc_sumsquare += (__s64)amount * amount;
+ if (amount < percpu_cntr->lc_min)
+ percpu_cntr->lc_min = amount;
+ if (amount > percpu_cntr->lc_max)
+ percpu_cntr->lc_max = amount;
+ }
+ cfs_atomic_inc(&percpu_cntr->lc_cntl.la_exit);
+ lprocfs_stats_unlock(stats);
+}
+EXPORT_SYMBOL(lprocfs_counter_add);
+
+void lprocfs_counter_sub(struct lprocfs_stats *stats, int idx,
+ long amount)
+{
+ struct lprocfs_counter *percpu_cntr;
+ int smp_id;
+
+ if (stats == NULL)
+ return;
+
+ /* With per-client stats, statistics are allocated only for
+ * single CPU area, so the smp_id should be 0 always. */
+ smp_id = lprocfs_stats_lock(stats, LPROCFS_GET_SMP_ID);
+
+ percpu_cntr = &(stats->ls_percpu[smp_id]->lp_cntr[idx]);
+ cfs_atomic_inc(&percpu_cntr->lc_cntl.la_entry);
+ if (percpu_cntr->lc_config & LPROCFS_CNTR_AVGMINMAX) {
+ /*
+ * currently lprocfs_count_add() can only be called in thread
+ * context; sometimes we use RCU callbacks to free memory
+ * which calls lprocfs_counter_sub(), and RCU callbacks may
+ * execute in softirq context - right now that's the only case
+ * we're in softirq context here, use separate counter for that.
+ * bz20650.
+ */
+ if (cfs_in_interrupt())
+ percpu_cntr->lc_sum_irq -= amount;
+ else
+ percpu_cntr->lc_sum -= amount;
+ }
+ cfs_atomic_inc(&percpu_cntr->lc_cntl.la_exit);
+ lprocfs_stats_unlock(stats);
+}
+EXPORT_SYMBOL(lprocfs_counter_sub);
+#endif /* LPROCFS */
+
EXPORT_SYMBOL(obd_fail_loc);
EXPORT_SYMBOL(obd_alloc_fail_rate);
EXPORT_SYMBOL(obd_fail_val);
git://git.whamcloud.com / fs / lustre-release.git / blobdiff