-#LyX 1.2 created this file. For more info see http://www.lyx.org/
-\lyxformat 220
+#LyX 1.3 created this file. For more info see http://www.lyx.org/
+\lyxformat 221
\textclass amsart
\language english
\inputencoding auto
\layout Subsection
NAME
-\layout Standard
+\layout Description
-lctl - low level Lustre file system configuration utility
+lmc Lustre configuration maker.
\layout Subsection
SYNOPSIS
\series bold
-lmc [options] [cmd args]
+lmc [options] --add <objectype> [args]
+\layout Standard
+
+
+\series bold
+lmc [options] --remove <objecttype> [args] -- [NOT IMPLEMENTED]
+\layout Standard
+
+
+\series bold
+lmc [options] --convert [args] -- [NOT IMPLEMENTED]
\layout Subsection
DESCRIPTION
\layout Standard
-lmc can be invoked to generate configuration data associated with systems
- in a Lustre cluster.
+At present
+\series bold
+\emph on
+lmc
+\series default
+\emph default
+, when invoked, adds configuration data to the config file.
+ In future,
+\series bold
+\emph on
+lmc
+\series default
+\emph default
+ will also be able to remove configuration data or convert its format.
+ A Lustre cluster consists of several components - MDS's, mount-points,
+ OSTs, LOVs and whatever those reference (e.g nets and profiles).
+ A single configuration file would be generated for the complete cluster.
+ In the
+\series bold
+\emph on
+lmc
+\series default
+\emph default
+ command line interface, each of these components is associated with an
+
+\emph on
+objecttype
+\emph default
+.
+
+\layout Standard
+
+The
+\emph on
+objecttype
+\emph default
+ refers to a collection of related configuration entities and can be one
+ of
+\series bold
+net
+\series default
+,
+\series bold
+ MDS
+\series default
+,
+\series bold
+ LOV
+\series default
+,
+\series bold
+ OST
+\series default
+,
+\series bold
+ mtpt
+\series default
+,
+\series bold
+ route
+\series default
+,
+\series bold
+
+\series default
+or
+\series bold
+ echo_client.
+
+\series default
+We describe the arguments required for the addition of each
+\emph on
+objecttype
+\emph default
+.
+
+\layout Standard
+
+To generate configuration data associated with systems in a Lustre cluster:
+\layout Description
+
+
+\emph on
+-
+\emph default
+-add\SpecialChar ~
+node Adds a new node in the cluster configuration.
+\begin_deeper
+\layout Standard
+
+The arguments required are:
\layout Description
--node\SpecialChar ~
-''node_name'' By itself, this will create a new node.
- This is also used to specify a specific node for other elements, and the
+''node_name'' This will create a new node with the given name if not
+ already present.
+\layout Description
+
+--timeout\SpecialChar ~
+<num> Timeout before going into recovery
\layout Description
---net\SpecialChar ~
-host_name\SpecialChar ~
-net_type\SpecialChar ~
-[port] Adds a network interface to a node.
- If host_name is '*', then the local address while be substituted when the
- node is configured with lconf.
- This requires a --node argument.
+--lustre_upcall\SpecialChar ~
+<path> Set the location of the Lustre upcall scripts used
+ by the client for recovery
+\layout Description
+
+--portals_upcall\SpecialChar ~
+<path> Specify the location of the Portals upcall scripts
+ used by the client for recovery
+\layout Description
+
+--upcall\SpecialChar ~
+<path> Specify the location of both (Lustre and Portals) upcall
+ scripts used by the client for recovery
+\end_deeper
+\layout Description
+
+
+\emph on
+-
+\emph default
+-add\SpecialChar ~
+net Adds a network device descriptor for the given node, with parameters
+ as indicated.
+\begin_deeper
+\layout Standard
+
+The arguments required are:
+\layout Description
+
+--node\SpecialChar ~
+''node_name'' This will create a new node with the given name if not
+ already present.
+ This is also used to specify a specific node for other elements.
+\layout Description
+
+--nettype\SpecialChar ~
+<type> This can be
+\series bold
+tcp, elan, gm, scimac.
+\layout Description
+
+--nid\SpecialChar ~
+nid The network
+\emph on
+id
+\emph default
+, e.g.
+ ElanID or IP address as used by Portals.
+ If
+\emph on
+nid
+\emph default
+ is '*', then the local address of the interface with specified
+\series bold
+nettype
+\series default
+is will be substituted when the node is configured with lconf.
+ An
+\emph on
+nid
+\emph default
+ of
+\emph on
+'*'
+\emph default
+ should be used only for the generic
+\emph on
+client
+\emph default
+ configuration.
+\layout Description
+
+--hostaddr addr
+\layout Description
+
+--router Optional flag to mark this node as a router
+\layout Description
+
+--port\SpecialChar ~
+[port] Optional arguement to indicate the tcp port.
+ The default is 988.
+
+\layout Description
+
+--tcpbuf\SpecialChar ~
+<size> Optional arguement.
+ The default TCP buffer size is 1MB.
+\layout Description
+
+--irq_affinity\SpecialChar ~
+0|1 Optional arguement.
+ Default is 0.
+\layout Description
+
+--nid_exchange\SpecialChar ~
+0|1 Optional arguement since some OSTs might not have the
+ required support.
+ This is turned off by default, value of 1 will turn it ON.
+
+\end_deeper
+\layout Description
+
+--add\SpecialChar ~
+mds
+\begin_deeper
+\layout Description
+
+--node\SpecialChar ~
+<node\SpecialChar ~
+name> Name of the node on which the MDS resides
\layout Description
--mds\SpecialChar ~
-mds_name Adds an MDS to the specified node.
- This requires a --node argument.
+<mds_name>
+\layout Description
+
+--dev\SpecialChar ~
+<pathname> Path of device on local system.
+ If the is a file, then a loop device is created and used as the block device.
+\layout Description
+
+--size\SpecialChar ~
+<size> Optional argument indicating the size (in KB) of the device
+ to be created (used typically for loop devices).
+\layout Description
+
+--node\SpecialChar ~
+<nodename> Adds an MDS to the specified node.
+ This requires a
+\emph on
+--node
+\emph default
+ argument, and it must not be a profile node.
+\layout Description
+
+--fstype\SpecialChar ~
+extN|ext3 Optional argument used to specify the file system type.
+ Default is ext3.
+\layout Description
+
+--journal_size\SpecialChar ~
+<size> Optional arguement to specify the journal size for
+ the ext2/ext3 file system.
+ The size should be in the units expected by
+\series bold
+mkfs
+\series default
+, so for ext3 it should be in MB.
+ If this is option is not used, the ext2/ext3 filesystem will be configured
+ with the default journal size.
+\end_deeper
+\layout Description
+
+--add\SpecialChar ~
+lov Creates an LOV with the specified parameters.
+ The
+\emph on
+mds_name
+\emph default
+ must already exist in the descriptor.
+\begin_deeper
\layout Description
--lov\SpecialChar ~
-lov_name\SpecialChar ~
-mds_name\SpecialChar ~
-stripe_sz\SpecialChar ~
-stripe_off\SpecialChar ~
-pattern Creates an LOV with the
- specified parameters.
- The mds_name must already exist in the descriptor.
- When used as an argument to other commands, only the lov_name is specified.
+<name>
\layout Description
---ost\SpecialChar ~
-device\SpecialChar ~
-[size] Creates an OBD, OST, and OSC.
+--mds\SpecialChar ~
+<name>
+\layout Description
+
+--stripe_sz\SpecialChar ~
+<size>
+\layout Description
+
+--stripe_cnt\SpecialChar ~
+<count> A value of 0 for this means to stripe on all available
+ OSTs.
+ Default is 0.
+\layout Description
+
+--stripe_pattern\SpecialChar ~
+<pattern> Only Pattern 0 (RAID 0) is supported currently.
+\end_deeper
+\layout Description
+
+--add\SpecialChar ~
+ost Creates an OBD, OST, and OSC.
The OST and OBD are created on the specified node.
- If an lov option is used, then the OSC will be added to the LOV.
- Requires: --node.
+\begin_deeper
\layout Description
---ostuuid\SpecialChar ~
-UUID specify the UUID of the OSC device.
- The default value is OSC_nodename.
+--ost\SpecialChar ~
+<name> Assign a name to the OST device.
\layout Description
---mtpt\SpecialChar ~
-/mnt/path\SpecialChar ~
-mdc_uuid\SpecialChar ~
-lov_uuid|osc_uuid Creates a mount point on the specified
+--node\SpecialChar ~
+<nodename> Node on which the OST service is run, can not be a profile
node.
+\layout Description
+
+--dev\SpecialChar ~
+<pathname> Path of device on local system.
+ If this is a file, then a loop device is created and used as the block
+ device.
+\layout Description
+
+--size\SpecialChar ~
+[size] Optional argument indicating the size (in KB) of the device
+ to be created (used typically for loop devices).
+\layout Description
+
+--obdtype\SpecialChar ~
+obdfilter|obdecho
+\layout Description
+
+--lov\SpecialChar ~
+<name> Optional arguement.
+ Name of LOV to which this OSC will be attached.
+
+\layout Description
+
+--ostuuid\SpecialChar ~
+UUID Specify the UUID of the OST device.
+
+\layout Description
+
+--fstype\SpecialChar ~
+extN|ext3 Optional arguement used to specify the file system type.
+ Default is ext3.
+\layout Description
+
+--journal_size\SpecialChar ~
+<size> Optional arguement to specify the journal size for
+ the ext2/ext3 file system.
+ The size should be in the units expected by
+\series bold
+mkfs
+\series default
+, so for ext3 it should be in MB.
+ If this is option is not used, the ext2/ext3 filesystem will be configured
+ with the default journal size.
+\end_deeper
+\layout Description
+
+--add\SpecialChar ~
+mtpt Creates a mount-point on the specified node.
Either an LOV or OSC name can be used.
- Requires: --node
+\begin_deeper
\layout Description
-Options:
+--node\SpecialChar ~
+node Node or profile node that will use the
+\emph on
+mtpt
+\emph default
+.
+\layout Description
+
+--path\SpecialChar ~
+/mnt/path\SpecialChar ~
+
+\layout Description
+
+--mds\SpecialChar ~
+mds_name
+\layout Description
+
+--ost\SpecialChar ~
+ost_name\SpecialChar ~
+|\SpecialChar ~
+--lov\SpecialChar ~
+lov_name
+\end_deeper
+\layout Description
+
+--add\SpecialChar ~
+route Creates a static route through a gateway to a specific
+\emph on
+nid
+\emph default
+ or a range of
+\emph on
+nid
+\emph default
+'s.
\begin_deeper
\layout Description
---output filename Sends output to the file.
- If the file exists, it will be overwritten.
+--node\SpecialChar ~
+node Node to add the route to.
+\layout Description
+
+--gw\SpecialChar ~
+nid The
+\emph on
+nid
+\emph default
+ of the gateway (must be a local interface or a peer).
+\layout Description
+
+--tgt\SpecialChar ~
+nid For a specific route, this is the target
+\emph on
+nid.
+\layout Description
+
+--lo\SpecialChar ~
+nid For a range route, this is the lo value
+\emph on
+nid.
\layout Description
---merge filename Add the new element to an existing file.
+--hi\SpecialChar ~
+nid For a range route, this is the hi value
+\emph on
+nid.
+\end_deeper
+\layout Description
+
+--add\SpecialChar ~
+echo-client Used for testing purpose only.
+\begin_deeper
\layout Description
---format Turns on autoformat.
- The block devices for MDS and OBD will be formatted if necessary.
+--node\SpecialChar ~
+node
+\emph on
+
+\layout Description
+
+--obd\SpecialChar ~
+obd_name
\end_deeper
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+Options
+\layout Description
+
+--output\SpecialChar ~
+filename Send output to the file.
+ If the file exists, it will be overwritten.
+\layout Description
+
+--merge\SpecialChar ~
+filename
+\emph on
+
+\emph default
+Add the new element to an existing file.
+
\layout Subsection
EXAMPLES
\layout Standard
-Real life examples are given in the lustre-conf man page.
+Real life examples are given in the Lustre-conf manual page.
\layout Subsection
BUGS
\layout Standard
None are known.
-\layout Subsection
-
-AUTHOR
-\layout Standard
-
-Cluster File Systems, Inc.
- 2002 - created
\the_end