From a list of nids for a remote node, show which interface communication
will take place on.
.TP
+.BI replace_nids " <devicename> <nid1>[,nid2,nid3 ...]"
+Replace the LNET Network Identifiers for a given device,
+as when the server's IP address has changed.
+This command must be run on the MGS node.
+Only MGS server should be started (command execution returns error
+in another cases). To start the MGS service only:
+mount -t lustre <MDT partition> -o nosvc <mount point>
+Note the replace_nids command skips any invalidated records in the configuration log.
+The previous log is backed up with the suffix '.bak'.
+.TP
.BI ping " <nid> "
Check LNET connectivity via an LNET ping. This will use the fabric
appropriate to the specified NID.
.br
lctl "get_param -NF" is equivalent to "list_param -F".
.TP
-.BI set_param " [-n] <parameter=value ...>"
+.BI set_param " [-n] [-P] [-d] <parameter=value ...>"
Set the value of Lustre or LNET parameter.
.br
.B -n
Disable printing of the key name when printing values.
.br
+.B -P
+Set the parameter permanently, filesystem-wide.
+This parameters are only visible to 2.5.0 and later clients, older clients will not see these parameters.
+.br
+.B -d
+Remove the permanent setting (only with -P option)
+.br
.B Examples:
.br
.B
0
.br
20
+.br
+.B
+# lctl set_param -P osc.*.max_dirty_mb=32
+.br
.TP
.BI conf_param " [-d] <device|fsname>.<parameter>=<value>"
Set a permanent configuration parameter for any device via the MGS. This
.BI changelog_deregister " <id>"
Unregister an existing changelog user. If the user's "clear" record number
is the minimum for the device, changelog records will be purged until the
-next minimum.
+next minimum.
.PP
+.SS LFSCK
+An on-line Lustre consistency check and repair tool.
+.TP
+.B lfsck_start \fR<-M | --device [MDT,OST]_device>
+ \fR[-A | --all] [-c | --create_ostobj [on | off]]
+ \fR[-e | --error <continue | abort>] [-h | --help]
+ \fR[-n | --dryrun [on | off]] [-o | --orphan]
+ \fR[-r | --reset] [-s | --speed speed_limit]
+ \fR[-t | --type lfsck_type[,lfsck_type...]]
+ \fR[-w | --window_size size]
+.br
+Start LFSCK on the specified MDT or OST device with specified parameters.
+.TP
+ -M, --device <MDT,OST_device>
+The MDT or OST device to start LFSCK/scrub on.
+.TP
+ -A, --all
+Start LFSCK on all MDT devices.
+.TP
+ -c, --create_ostobj [on | off]
+Create the lost OST-object for dangling LOV EA: 'off'(default) or 'on'. Under
+default mode, when the LFSCK find some MDT-object with dangling reference, it
+will report the inconsistency but without repairing. Otherwise the LFSCK will
+re-create the missed OST-object.
+.TP
+ -e, --error <error_handle>
+With error_handle as 'abort' LFSCK will stop if a repair is impossible. If no
+value is specified, the saved value will be used if resuming from a checkpoint.
+Otherwise the default behavior is to 'continue' if a repair is impossible.
+.TP
+ -h, --help
+Show this help.
+.TP
+ -n, --dryrun [on | off]
+Perform a trial run with no changes made. Default is 'off'
+.TP
+ -o, --orphan
+Handle orphan objects, such as orphan OST-objects for layout LFSCK.
+.TP
+ -r, --reset
+Set the current position of object iteration to the beginning of the specified
+device. The non-specified parameters will also be reset as default. By default
+the iterator will resume the scanning from the last checkpoint (position), and
+other non-specified parameters will be the same as former non-completed run.
+.TP
+ -s, --speed <speed_limit>
+Set the upper limit of LFSCK processing in objects per second. If no value is
+specified the saved value is used (if resuming from a check point). Otherwise
+the default value of 0 is used. 0 means run as fast as possible.
+.TP
+ -t, --type <lfsck_type[,lfsck_type...]>
+The type of LFSCK checking/repair to execute. By default, the LFSCK
+component(s) which ran last time and did not finish or the component(s)
+corresponding to some known system inconsistency, will be started. Anytime
+LFSCK is triggered on an ldiskfs MDT or OST, the OI Scrub is executed.
+Alternative types include FID-in-dirent and linkEA (namespace) and MDT-OST
+inconsistency (layout).
+.TP
+ -w, --window_size <size>
+The window size for async requests pipeline.
+.TP
+.B lfsck_stop \fR<-M | --device [MDT,OST]_device> [-A | --all] [-h | --help]
+Stop LFSCK on the specified MDT or OST device.
+.TP
+ -M, --device <[MDT,OST]_device>
+The MDT or OST device to stop LFSCK/scrub on.
+.TP
+ -A, --all
+Stop LFSCK on all devices.
+.TP
+ -h, --help
+Show this help.
.SS Debug
.TP
.BI debug_daemon