Whamcloud - gitweb
git://git.whamcloud.com
/
fs
/
lustre-release.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
LU-8955 nodemap: add SELinux policy info to nodemap
[fs/lustre-release.git]
/
lustre
/
utils
/
lctl.c
diff --git
a/lustre/utils/lctl.c
b/lustre/utils/lctl.c
index
e963c9f
..
4ed25e8
100644
(file)
--- a/
lustre/utils/lctl.c
+++ b/
lustre/utils/lctl.c
@@
-94,7
+94,7
@@
command_t cmdlist[] = {
"usage: which_nid NID [NID...]"},
{"replace_nids", jt_replace_nids, 0,
"replace primary NIDs for a device\n"
"usage: which_nid NID [NID...]"},
{"replace_nids", jt_replace_nids, 0,
"replace primary NIDs for a device\n"
- "usage: replace_nids <device> <nid1>[,nid2,nid3]"},
+ "usage: replace_nids <device> <nid1>[,nid2,nid3
:nid4,nid5:nid6
]"},
{"interface_list", jt_ptl_print_interfaces, 0,
"print network interface entries\n"
"usage: interface_list"},
{"interface_list", jt_ptl_print_interfaces, 0,
"print network interface entries\n"
"usage: interface_list"},
@@
-115,9
+115,10
@@
command_t cmdlist[] = {
"usage: net_drop_add <-s | --source NID>\n"
" <-d | --dest NID>\n"
" <<-r | --rate DROP_RATE> |\n"
"usage: net_drop_add <-s | --source NID>\n"
" <-d | --dest NID>\n"
" <<-r | --rate DROP_RATE> |\n"
- "
<-i | --interval SECONDS>>\n"
+ " <-i | --interval SECONDS>>\n"
" [<-p | --portal> PORTAL...]\n"
" [<-p | --portal> PORTAL...]\n"
- " [<-m | --message> <PUT|ACK|GET|REPLY>...]\n"},
+ " [<-m | --message> <PUT|ACK|GET|REPLY>...]\n"
+ " [< -e | --health_error]\n"},
{"net_drop_del", jt_ptl_drop_del, 0, "remove LNet drop rule\n"
"usage: net_drop_del <[-a | --all] |\n"
" <-s | --source NID>\n"
{"net_drop_del", jt_ptl_drop_del, 0, "remove LNet drop rule\n"
"usage: net_drop_del <[-a | --all] |\n"
" <-s | --source NID>\n"
@@
-163,7
+164,8
@@
command_t cmdlist[] = {
{"set_timeout", jt_lcfg_set_timeout, 0,
"usage: conf_param obd_timeout=<secs>\n"},
#if LUSTRE_VERSION_CODE < OBD_OCD_VERSION(3, 0, 53, 0)
{"set_timeout", jt_lcfg_set_timeout, 0,
"usage: conf_param obd_timeout=<secs>\n"},
#if LUSTRE_VERSION_CODE < OBD_OCD_VERSION(3, 0, 53, 0)
- {"conf_param", jt_lcfg_mgsparam, 0,"set a permanent config parameter.\n"
+ {"conf_param", jt_lcfg_confparam, 0,
+ "set a permanent config parameter.\n"
"This command must be run on the MGS node\n"
"usage: conf_param [-d] <target.keyword=val>\n"
" -d Delete the permanent setting from the configuration."},
"This command must be run on the MGS node\n"
"usage: conf_param [-d] <target.keyword=val>\n"
" -d Delete the permanent setting from the configuration."},
@@
-181,12
+183,13
@@
command_t cmdlist[] = {
" (Especially useful when using patterns.)\n"
" -R Get parameters recursively from the specified entry.\n"},
{"set_param", jt_lcfg_setparam, 0, "set the Lustre or LNET parameter\n"
" (Especially useful when using patterns.)\n"
" -R Get parameters recursively from the specified entry.\n"},
{"set_param", jt_lcfg_setparam, 0, "set the Lustre or LNET parameter\n"
- "usage: set_param [-n] [-P] [-d]"
+ "usage: set_param [-n] [-P] [-d]
[-F]
"
"<param_path1=value1 param_path2=value2 ...>\n"
"Set the value of the Lustre or LNET parameter at the specified path.\n"
" -n Disable printing of the key name when printing values.\n"
" -P Set the parameter permanently, filesystem-wide.\n"
"<param_path1=value1 param_path2=value2 ...>\n"
"Set the value of the Lustre or LNET parameter at the specified path.\n"
" -n Disable printing of the key name when printing values.\n"
" -P Set the parameter permanently, filesystem-wide.\n"
- " -d Remove the permanent setting (only with -P option).\n"},
+ " -d Remove the permanent setting (only with -P option).\n"
+ " -F Read permanent configuration from a YAML file.\n"},
{"list_param", jt_lcfg_listparam, 0,
"list the Lustre or LNET parameter name\n"
"usage: list_param [-F|-R|-D] <param_path1 param_path2 ...>\n"
{"list_param", jt_lcfg_listparam, 0,
"list the Lustre or LNET parameter name\n"
"usage: list_param [-F|-R|-D] <param_path1 param_path2 ...>\n"
@@
-327,6
+330,9
@@
command_t cmdlist[] = {
{"nodemap_set_fileset", jt_nodemap_set_fileset, 0,
"set a fileset on a nodemap\n"
"usage: nodemap_set_fileset <fileset>"},
{"nodemap_set_fileset", jt_nodemap_set_fileset, 0,
"set a fileset on a nodemap\n"
"usage: nodemap_set_fileset <fileset>"},
+ {"nodemap_set_sepol", jt_nodemap_set_sepol, 0,
+ "set SELinux policy info on a nodemap\n"
+ "usage: nodemap_set_sepol <SELinux policy info>"},
{"nodemap_test_nid", jt_nodemap_test_nid, 0,
"usage: nodemap_test_nid <nid>"},
{"nodemap_test_id", jt_nodemap_test_id, 0,
{"nodemap_test_nid", jt_nodemap_test_nid, 0,
"usage: nodemap_test_nid <nid>"},
{"nodemap_test_id", jt_nodemap_test_id, 0,
@@
-357,6
+363,9
@@
command_t cmdlist[] = {
"usage: setup <args...>"},
{"cleanup", jt_obd_cleanup, 0, "cleanup previously setup device\n"
"usage: cleanup [force | failover]"},
"usage: setup <args...>"},
{"cleanup", jt_obd_cleanup, 0, "cleanup previously setup device\n"
"usage: cleanup [force | failover]"},
+ {"clear_conf", jt_lcfg_clear, 0,
+ "drop unused config logs for a device or filesystem\n"
+ "usage: clear_conf <device|fsname>"},
{"fork_lcfg", jt_lcfg_fork, 0,
"copy configuration files for named filesystem with given name\n"
"usage: fork_lcfg <fsname> <newname>"},
{"fork_lcfg", jt_lcfg_fork, 0,
"copy configuration files for named filesystem with given name\n"
"usage: fork_lcfg <fsname> <newname>"},