+fops_mds_index=0
+nm_test_mkdir() {
+ if [ $MDSCOUNT -le 1 ]; then
+ do_node ${clients_arr[0]} mkdir -p $DIR/$tdir
+ else
+ # round-robin MDTs to test DNE nodemap support
+ [ ! -d $DIR ] && do_node ${clients_arr[0]} mkdir -p $DIR
+ do_node ${clients_arr[0]} $LFS setdirstripe -c 1 -i \
+ $((fops_mds_index % MDSCOUNT)) $DIR/$tdir
+ ((fops_mds_index++))
+ fi
+}
+
+# acl test directory needs to be initialized on a privileged client
+fops_test_setup() {
+ local admin=$(do_facet mgs $LCTL get_param -n nodemap.c0.admin_nodemap)
+ local trust=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.trusted_nodemap)
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 1
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+
+ do_node ${clients_arr[0]} rm -rf $DIR/$tdir
+ nm_test_mkdir
+ do_node ${clients_arr[0]} chown $user $DIR/$tdir
+
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property trusted --value $trust
+
+ # flush MDT locks to make sure they are reacquired before test
+ do_node ${clients_arr[0]} $LCTL set_param \
+ ldlm.namespaces.$FSNAME-MDT*.lru_size=clear
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+}
+
+# fileset test directory needs to be initialized on a privileged client
+fileset_test_setup() {
+ local nm=$1
+
+ if [ -n "$FILESET" -a -z "$SKIP_FILESET" ]; then
+ cleanup_mount $MOUNT
+ FILESET="" zconf_mount_clients $CLIENTS $MOUNT
+ fi
+
+ local admin=$(do_facet mgs $LCTL get_param -n \
+ nodemap.${nm}.admin_nodemap)
+ local trust=$(do_facet mgs $LCTL get_param -n \
+ nodemap.${nm}.trusted_nodemap)
+
+ do_facet mgs $LCTL nodemap_modify --name $nm --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name $nm --property trusted \
+ --value 1
+
+ wait_nm_sync $nm admin_nodemap
+ wait_nm_sync $nm trusted_nodemap
+
+ # create directory and populate it for subdir mount
+ do_node ${clients_arr[0]} mkdir $MOUNT/$subdir ||
+ error "unable to create dir $MOUNT/$subdir"
+ do_node ${clients_arr[0]} touch $MOUNT/$subdir/this_is_$subdir ||
+ error "unable to create file $MOUNT/$subdir/this_is_$subdir"
+ do_node ${clients_arr[0]} mkdir $MOUNT/$subdir/$subsubdir ||
+ error "unable to create dir $MOUNT/$subdir/$subsubdir"
+ do_node ${clients_arr[0]} touch \
+ $MOUNT/$subdir/$subsubdir/this_is_$subsubdir ||
+ error "unable to create file \
+ $MOUNT/$subdir/$subsubdir/this_is_$subsubdir"
+
+ do_facet mgs $LCTL nodemap_modify --name $nm \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name $nm \
+ --property trusted --value $trust
+
+ # flush MDT locks to make sure they are reacquired before test
+ do_node ${clients_arr[0]} $LCTL set_param \
+ ldlm.namespaces.$FSNAME-MDT*.lru_size=clear
+
+ wait_nm_sync $nm admin_nodemap
+ wait_nm_sync $nm trusted_nodemap
+}
+
+# fileset test directory needs to be initialized on a privileged client
+fileset_test_cleanup() {
+ local nm=$1
+ local admin=$(do_facet mgs $LCTL get_param -n \
+ nodemap.${nm}.admin_nodemap)
+ local trust=$(do_facet mgs $LCTL get_param -n \
+ nodemap.${nm}.trusted_nodemap)
+
+ do_facet mgs $LCTL nodemap_modify --name $nm --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name $nm --property trusted \
+ --value 1
+
+ wait_nm_sync $nm admin_nodemap
+ wait_nm_sync $nm trusted_nodemap
+
+ # cleanup directory created for subdir mount
+ do_node ${clients_arr[0]} rm -rf $MOUNT/$subdir ||
+ error "unable to remove dir $MOUNT/$subdir"
+
+ do_facet mgs $LCTL nodemap_modify --name $nm \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name $nm \
+ --property trusted --value $trust
+
+ # flush MDT locks to make sure they are reacquired before test
+ do_node ${clients_arr[0]} $LCTL set_param \
+ ldlm.namespaces.$FSNAME-MDT*.lru_size=clear
+
+ wait_nm_sync $nm admin_nodemap
+ wait_nm_sync $nm trusted_nodemap
+ if [ -n "$FILESET" -a -z "$SKIP_FILESET" ]; then
+ cleanup_mount $MOUNT
+ zconf_mount_clients $CLIENTS $MOUNT
+ fi
+}
+
+do_create_delete() {
+ local run_u=$1
+ local key=$2
+ local testfile=$DIR/$tdir/$tfile
+ local rc=0
+ local c=0 d=0
+ local qused_new
+ if $run_u touch $testfile >& /dev/null; then
+ c=1
+ $run_u rm $testfile && d=1
+ fi >& /dev/null
+
+ local res="$c $d"
+ local expected=$(get_cr_del_expected $key)
+ [ "$res" != "$expected" ] &&
+ error "test $key, wanted $expected, got $res" && rc=$((rc + 1))
+ return $rc
+}
+
+nodemap_check_quota() {
+ local run_u="$1"
+ $run_u lfs quota -q $DIR | awk '{ print $2; exit; }'
+}
+
+do_fops_quota_test() {
+ local run_u=$1
+ # fuzz quota used to account for possible indirect blocks, etc
+ local quota_fuzz=$(fs_log_size)
+ local qused_orig=$(nodemap_check_quota "$run_u")
+ local qused_high=$((qused_orig + quota_fuzz))
+ local qused_low=$((qused_orig - quota_fuzz))
+ local testfile=$DIR/$tdir/$tfile
+ $run_u dd if=/dev/zero of=$testfile oflag=sync bs=1M count=1 \
+ >& /dev/null || error "unable to write quota test file"
+ sync; sync_all_data || true
+
+ local qused_new=$(nodemap_check_quota "$run_u")
+ [ $((qused_new)) -lt $((qused_low + 1024)) -o \
+ $((qused_new)) -gt $((qused_high + 1024)) ] &&
+ error "$qused_new != $qused_orig + 1M after write, " \
+ "fuzz is $quota_fuzz"
+ $run_u rm $testfile || error "unable to remove quota test file"
+ wait_delete_completed_mds
+
+ qused_new=$(nodemap_check_quota "$run_u")
+ [ $((qused_new)) -lt $((qused_low)) \
+ -o $((qused_new)) -gt $((qused_high)) ] &&
+ error "quota not reclaimed, expect $qused_orig, " \
+ "got $qused_new, fuzz $quota_fuzz"
+}
+
+get_fops_mapped_user() {
+ local cli_user=$1
+
+ for ((i=0; i < ${#FOPS_IDMAPS[@]}; i++)); do
+ for map in ${FOPS_IDMAPS[i]}; do
+ if [ $(cut -d: -f1 <<< "$map") == $cli_user ]; then
+ cut -d: -f2 <<< "$map"
+ return
+ fi
+ done
+ done
+ echo -1
+}
+
+get_cr_del_expected() {
+ local -a key
+ IFS=":" read -a key <<< "$1"
+ local mapmode="${key[0]}"
+ local mds_user="${key[1]}"
+ local cluster="${key[2]}"
+ local cli_user="${key[3]}"
+ local mode="0${key[4]}"
+ local SUCCESS="1 1"
+ local FAILURE="0 0"
+ local noadmin=0
+ local mapped=0
+ local other=0
+
+ [[ $mapmode == *mapped* ]] && mapped=1
+ # only c1 is mapped in these test cases
+ [[ $mapmode == mapped_trusted* ]] && [ "$cluster" == "c0" ] && mapped=0
+ [[ $mapmode == *noadmin* ]] && noadmin=1
+
+ # o+wx works as long as the user isn't mapped
+ if [ $((mode & 3)) -eq 3 ]; then
+ other=1
+ fi
+
+ # if client user is root, check if root is squashed
+ if [ "$cli_user" == "0" ]; then
+ # squash root succeed, if other bit is on
+ case $noadmin in
+ 0) echo $SUCCESS;;
+ 1) [ "$other" == "1" ] && echo $SUCCESS
+ [ "$other" == "0" ] && echo $FAILURE;;
+ esac
+ return
+ fi
+ if [ "$mapped" == "0" ]; then
+ [ "$other" == "1" ] && echo $SUCCESS
+ [ "$other" == "0" ] && echo $FAILURE
+ return
+ fi
+
+ # if mapped user is mds user, check for u+wx
+ mapped_user=$(get_fops_mapped_user $cli_user)
+ [ "$mapped_user" == "-1" ] &&
+ error "unable to find mapping for client user $cli_user"
+
+ if [ "$mapped_user" == "$mds_user" -a \
+ $(((mode & 0300) == 0300)) -eq 1 ]; then
+ echo $SUCCESS
+ return
+ fi
+ if [ "$mapped_user" != "$mds_user" -a "$other" == "1" ]; then
+ echo $SUCCESS
+ return
+ fi
+ echo $FAILURE
+}
+
+test_fops_admin_cli_i=""
+test_fops_chmod_dir() {
+ local current_cli_i=$1
+ local perm_bits=$2
+ local dir_to_chmod=$3
+ local new_admin_cli_i=""
+
+ # do we need to set up a new admin client?
+ [ "$current_cli_i" == "0" ] && [ "$test_fops_admin_cli_i" != "1" ] &&
+ new_admin_cli_i=1
+ [ "$current_cli_i" != "0" ] && [ "$test_fops_admin_cli_i" != "0" ] &&
+ new_admin_cli_i=0
+
+ # if only one client, and non-admin, need to flip admin everytime
+ if [ "$num_clients" == "1" ]; then
+ test_fops_admin_client=$clients
+ test_fops_admin_val=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.admin_nodemap)
+ if [ "$test_fops_admin_val" != "1" ]; then
+ do_facet mgs $LCTL nodemap_modify \
+ --name c0 \
+ --property admin \
+ --value 1
+ wait_nm_sync c0 admin_nodemap
+ fi
+ elif [ "$new_admin_cli_i" != "" ]; then
+ # restore admin val to old admin client
+ if [ "$test_fops_admin_cli_i" != "" ] &&
+ [ "$test_fops_admin_val" != "1" ]; then
+ do_facet mgs $LCTL nodemap_modify \
+ --name c${test_fops_admin_cli_i} \
+ --property admin \
+ --value $test_fops_admin_val
+ wait_nm_sync c${test_fops_admin_cli_i} admin_nodemap
+ fi
+
+ test_fops_admin_cli_i=$new_admin_cli_i
+ test_fops_admin_client=${clients_arr[$new_admin_cli_i]}
+ test_fops_admin_val=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c${new_admin_cli_i}.admin_nodemap)
+
+ if [ "$test_fops_admin_val" != "1" ]; then
+ do_facet mgs $LCTL nodemap_modify \
+ --name c${new_admin_cli_i} \
+ --property admin \
+ --value 1
+ wait_nm_sync c${new_admin_cli_i} admin_nodemap
+ fi
+ fi
+
+ do_node $test_fops_admin_client chmod $perm_bits $DIR/$tdir || return 1
+
+ # remove admin for single client if originally non-admin
+ if [ "$num_clients" == "1" ] && [ "$test_fops_admin_val" != "1" ]; then
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin \
+ --value 0
+ wait_nm_sync c0 admin_nodemap
+ fi
+
+ return 0
+}
+
+test_fops() {
+ local mapmode="$1"
+ local single_client="$2"
+ local client_user_list=([0]="0 $((IDBASE+3)) $((IDBASE+4))"
+ [1]="0 $((IDBASE+5)) $((IDBASE+6))")
+ local mds_i
+ local rc=0
+ local perm_bit_list="0 3 $((0300)) $((0303))"
+ # SLOW tests 000-007, 010-070, 100-700 (octal modes)
+ [ "$SLOW" == "yes" ] &&
+ perm_bit_list="0 $(seq 1 7) $(seq 8 8 63) $(seq 64 64 511) \
+ $((0303))"
+
+ # step through mds users. -1 means root
+ for mds_i in -1 0 1 2; do
+ local user=$((mds_i + IDBASE))
+ local client
+ local x
+
+ [ "$mds_i" == "-1" ] && user=0
+
+ echo mkdir -p $DIR/$tdir
+ fops_test_setup
+ local cli_i=0
+ for client in $clients; do
+ local u
+ for u in ${client_user_list[$cli_i]}; do
+ local run_u="do_node $client \
+ $RUNAS_CMD -u$u -g$u -G$u"
+ for perm_bits in $perm_bit_list; do
+ local mode=$(printf %03o $perm_bits)
+ local key
+ key="$mapmode:$user:c$cli_i:$u:$mode"
+ test_fops_chmod_dir $cli_i $mode \
+ $DIR/$tdir ||
+ error cannot chmod $key
+ do_create_delete "$run_u" "$key"
+ done
+
+ # check quota
+ test_fops_chmod_dir $cli_i 777 $DIR/$tdir ||
+ error cannot chmod $key
+ do_fops_quota_test "$run_u"
+ done
+
+ cli_i=$((cli_i + 1))
+ [ "$single_client" == "1" ] && break
+ done
+ rm -rf $DIR/$tdir
+ done
+ return $rc
+}
+
+nodemap_version_check () {
+ remote_mgs_nodsh && skip "remote MGS with nodsh" && return 1
+ [ "$MGS_VERSION" -lt $(version_code 2.5.53) ] &&
+ skip "No nodemap on $MGS_VERSION MGS < 2.5.53" &&
+ return 1
+ return 0
+}
+
+nodemap_test_setup() {
+ local rc
+ local active_nodemap=1
+
+ [ "$1" == "0" ] && active_nodemap=0
+
+ do_nodes $(comma_list $(all_mdts_nodes)) \
+ $LCTL set_param mdt.*.identity_upcall=NONE
+
+ rc=0
+ create_fops_nodemaps
+ rc=$?
+ [[ $rc != 0 ]] && error "adding fops nodemaps failed $rc"
+
+ do_facet mgs $LCTL nodemap_activate $active_nodemap
+ wait_nm_sync active
+
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property admin --value 1
+ wait_nm_sync default admin_nodemap
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property trusted --value 1
+ wait_nm_sync default trusted_nodemap
+}
+
+nodemap_test_cleanup() {
+ trap 0
+ delete_fops_nodemaps
+ rc=$?
+ [[ $rc != 0 ]] && error "removing fops nodemaps failed $rc"
+
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property admin --value 0
+ wait_nm_sync default admin_nodemap
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property trusted --value 0
+ wait_nm_sync default trusted_nodemap
+
+ do_facet mgs $LCTL nodemap_activate 0
+ wait_nm_sync active 0
+
+ export SK_UNIQUE_NM=false
+ return 0
+}
+
+nodemap_clients_admin_trusted() {
+ local admin=$1
+ local tr=$2
+ local i=0
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property trusted --value $tr
+ i=$((i + 1))
+ done
+ wait_nm_sync c$((i - 1)) admin_nodemap
+ wait_nm_sync c$((i - 1)) trusted_nodemap
+}
+
+test_16() {
+ nodemap_version_check || return 0
+ nodemap_test_setup 0
+
+ trap nodemap_test_cleanup EXIT
+ test_fops all_off
+ nodemap_test_cleanup
+}
+run_test 16 "test nodemap all_off fileops"
+
+test_17() {
+ if $SHARED_KEY &&
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
+ skip "Need MDS >= 2.11.55"
+ fi
+
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ nodemap_clients_admin_trusted 0 1
+ test_fops trusted_noadmin 1
+ nodemap_test_cleanup
+}
+run_test 17 "test nodemap trusted_noadmin fileops"
+
+test_18() {
+ if $SHARED_KEY &&
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
+ skip "Need MDS >= 2.11.55"
+ fi
+
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ nodemap_clients_admin_trusted 0 0
+ test_fops mapped_noadmin 1
+ nodemap_test_cleanup
+}
+run_test 18 "test nodemap mapped_noadmin fileops"
+
+test_19() {
+ if $SHARED_KEY &&
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
+ skip "Need MDS >= 2.11.55"
+ fi
+
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ nodemap_clients_admin_trusted 1 1
+ test_fops trusted_admin 1
+ nodemap_test_cleanup
+}
+run_test 19 "test nodemap trusted_admin fileops"
+
+test_20() {
+ if $SHARED_KEY &&
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
+ skip "Need MDS >= 2.11.55"
+ fi
+
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ nodemap_clients_admin_trusted 1 0
+ test_fops mapped_admin 1
+ nodemap_test_cleanup
+}
+run_test 20 "test nodemap mapped_admin fileops"
+
+test_21() {
+ if $SHARED_KEY &&
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
+ skip "Need MDS >= 2.11.55"
+ fi
+
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ local x=1
+ local i=0
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property admin --value 0
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property trusted --value $x
+ x=0
+ i=$((i + 1))
+ done
+ wait_nm_sync c$((i - 1)) trusted_nodemap
+
+ test_fops mapped_trusted_noadmin
+ nodemap_test_cleanup
+}
+run_test 21 "test nodemap mapped_trusted_noadmin fileops"
+
+test_22() {
+ if $SHARED_KEY &&
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.55) ]; then
+ skip "Need MDS >= 2.11.55"
+ fi
+
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ local x=1
+ local i=0
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property trusted --value $x
+ x=0
+ i=$((i + 1))
+ done
+ wait_nm_sync c$((i - 1)) trusted_nodemap
+
+ test_fops mapped_trusted_admin
+ nodemap_test_cleanup
+}
+run_test 22 "test nodemap mapped_trusted_admin fileops"
+
+# acl test directory needs to be initialized on a privileged client
+nodemap_acl_test_setup() {
+ local admin=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.admin_nodemap)
+ local trust=$(do_facet mgs $LCTL get_param -n \
+ nodemap.c0.trusted_nodemap)
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 1
+
+ wait_nm_sync c0 admin_nodemap
+ wait_nm_sync c0 trusted_nodemap
+
+ do_node ${clients_arr[0]} rm -rf $DIR/$tdir
+ nm_test_mkdir
+ do_node ${clients_arr[0]} chmod a+rwx $DIR/$tdir ||
+ error unable to chmod a+rwx test dir $DIR/$tdir
+
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property admin --value $admin
+ do_facet mgs $LCTL nodemap_modify --name c0 \
+ --property trusted --value $trust
+
+ wait_nm_sync c0 trusted_nodemap
+}
+
+# returns 0 if the number of ACLs does not change on the second (mapped) client
+# after being set on the first client
+nodemap_acl_test() {
+ local user="$1"
+ local set_client="$2"
+ local get_client="$3"
+ local check_setfacl="$4"
+ local setfacl_error=0
+ local testfile=$DIR/$tdir/$tfile
+ local RUNAS_USER="$RUNAS_CMD -u $user"
+ local acl_count=0
+ local acl_count_post=0
+
+ nodemap_acl_test_setup
+ sleep 5
+
+ do_node $set_client $RUNAS_USER touch $testfile
+
+ # ACL masks aren't filtered by nodemap code, so we ignore them
+ acl_count=$(do_node $get_client getfacl $testfile | grep -v mask |
+ wc -l)
+ do_node $set_client $RUNAS_USER setfacl -m $user:rwx $testfile ||
+ setfacl_error=1
+
+ # if check setfacl is set to 1, then it's supposed to error
+ if [ "$check_setfacl" == "1" ]; then
+ [ "$setfacl_error" != "1" ] && return 1
+ return 0
+ fi
+ [ "$setfacl_error" == "1" ] && echo "WARNING: unable to setfacl"
+
+ acl_count_post=$(do_node $get_client getfacl $testfile | grep -v mask |
+ wc -l)
+ [ $acl_count -eq $acl_count_post ] && return 0
+ return 1
+}
+
+test_23a() {
+ [ $num_clients -lt 2 ] && skip "Need 2 clients at least" && return
+ nodemap_version_check || return 0
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ # 1 trusted cluster, 1 mapped cluster
+ local unmapped_fs=$((IDBASE+0))
+ local unmapped_c1=$((IDBASE+5))
+ local mapped_fs=$((IDBASE+2))
+ local mapped_c0=$((IDBASE+4))
+ local mapped_c1=$((IDBASE+6))
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 1
+
+ do_facet mgs $LCTL nodemap_modify --name c1 --property admin --value 0
+ do_facet mgs $LCTL nodemap_modify --name c1 --property trusted --value 0
+
+ wait_nm_sync c1 trusted_nodemap
+
+ # setfacl on trusted cluster to unmapped user, verify it's not seen
+ nodemap_acl_test $unmapped_fs ${clients_arr[0]} ${clients_arr[1]} ||
+ error "acl count (1)"
+
+ # setfacl on trusted cluster to mapped user, verify it's seen
+ nodemap_acl_test $mapped_fs ${clients_arr[0]} ${clients_arr[1]} &&
+ error "acl count (2)"
+
+ # setfacl on mapped cluster to mapped user, verify it's seen
+ nodemap_acl_test $mapped_c1 ${clients_arr[1]} ${clients_arr[0]} &&
+ error "acl count (3)"
+
+ # setfacl on mapped cluster to unmapped user, verify error
+ nodemap_acl_test $unmapped_fs ${clients_arr[1]} ${clients_arr[0]} 1 ||
+ error "acl count (4)"
+
+ # 2 mapped clusters
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 0
+ do_facet mgs $LCTL nodemap_modify --name c0 --property trusted --value 0
+
+ wait_nm_sync c0 trusted_nodemap
+
+ # setfacl to mapped user on c1, also mapped to c0, verify it's seen
+ nodemap_acl_test $mapped_c1 ${clients_arr[1]} ${clients_arr[0]} &&
+ error "acl count (5)"
+
+ # setfacl to mapped user on c1, not mapped to c0, verify not seen
+ nodemap_acl_test $unmapped_c1 ${clients_arr[1]} ${clients_arr[0]} ||
+ error "acl count (6)"
+
+ nodemap_test_cleanup
+}
+run_test 23a "test mapped regular ACLs"
+
+test_23b() { #LU-9929
+ [ $num_clients -lt 2 ] && skip "Need 2 clients at least"
+ [ "$MGS_VERSION" -lt $(version_code 2.10.53) ] &&
+ skip "Need MGS >= 2.10.53"
+
+ export SK_UNIQUE_NM=true
+ nodemap_test_setup
+ trap nodemap_test_cleanup EXIT
+
+ local testdir=$DIR/$tdir
+ local fs_id=$((IDBASE+10))
+ local unmapped_id
+ local mapped_id
+ local fs_user
+
+ do_facet mgs $LCTL nodemap_modify --name c0 --property admin --value 1
+ wait_nm_sync c0 admin_nodemap
+ do_facet mgs $LCTL nodemap_modify --name c1 --property admin --value 1
+ wait_nm_sync c1 admin_nodemap
+ do_facet mgs $LCTL nodemap_modify --name c1 --property trusted --value 1
+ wait_nm_sync c1 trusted_nodemap
+
+ # Add idmap $ID0:$fs_id (500:60010)
+ do_facet mgs $LCTL nodemap_add_idmap --name c0 --idtype gid \
+ --idmap $ID0:$fs_id ||
+ error "add idmap $ID0:$fs_id to nodemap c0 failed"
+ wait_nm_sync c0 idmap
+
+ # set/getfacl default acl on client 1 (unmapped gid=500)
+ do_node ${clients_arr[0]} rm -rf $testdir
+ do_node ${clients_arr[0]} mkdir -p $testdir
+ # Here, USER0=$(getent passwd | grep :$ID0:$ID0: | cut -d: -f1)
+ do_node ${clients_arr[0]} setfacl -R -d -m group:$USER0:rwx $testdir ||
+ error "setfacl $testdir on ${clients_arr[0]} failed"
+ unmapped_id=$(do_node ${clients_arr[0]} getfacl $testdir |
+ grep -E "default:group:.*:rwx" | awk -F: '{print $3}')
+ [ "$unmapped_id" = "$USER0" ] ||
+ error "gid=$ID0 was not unmapped correctly on ${clients_arr[0]}"
+
+ # getfacl default acl on client 2 (mapped gid=60010)
+ mapped_id=$(do_node ${clients_arr[1]} getfacl $testdir |
+ grep -E "default:group:.*:rwx" | awk -F: '{print $3}')
+ fs_user=$(do_node ${clients_arr[1]} getent passwd |
+ grep :$fs_id:$fs_id: | cut -d: -f1)
+ [ -z "$fs_user" ] && fs_user=$fs_id
+ [ $mapped_id -eq $fs_id -o "$mapped_id" = "$fs_user" ] ||
+ error "Should return gid=$fs_id or $fs_user on client2"
+
+ rm -rf $testdir
+ nodemap_test_cleanup
+ export SK_UNIQUE_NM=false
+}
+run_test 23b "test mapped default ACLs"
+
+test_24() {
+ nodemap_test_setup
+
+ trap nodemap_test_cleanup EXIT
+ do_nodes $(comma_list $(all_server_nodes)) $LCTL get_param -R nodemap
+
+ nodemap_test_cleanup
+}
+run_test 24 "check nodemap proc files for LBUGs and Oopses"
+
+test_25() {
+ local tmpfile=$(mktemp)
+ local tmpfile2=$(mktemp)
+ local tmpfile3=$(mktemp)
+ local tmpfile4=$(mktemp)
+ local subdir=c0dir
+ local client
+
+ nodemap_version_check || return 0
+
+ # stop clients for this test
+ zconf_umount_clients $CLIENTS $MOUNT ||
+ error "unable to umount clients $CLIENTS"
+
+ export SK_UNIQUE_NM=true
+ nodemap_test_setup
+
+ # enable trusted/admin for setquota call in cleanup_and_setup_lustre()
+ i=0
+ for client in $clients; do
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property admin --value 1
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property trusted --value 1
+ ((i++))
+ done
+ wait_nm_sync c$((i - 1)) trusted_nodemap
+
+ trap nodemap_test_cleanup EXIT
+
+ # create a new, empty nodemap, and add fileset info to it
+ do_facet mgs $LCTL nodemap_add test25 ||
+ error "unable to create nodemap $testname"
+ do_facet mgs $LCTL set_param -P nodemap.$testname.fileset=/$subdir ||
+ error "unable to add fileset info to nodemap test25"
+
+ wait_nm_sync test25 id
+
+ do_facet mgs $LCTL nodemap_info > $tmpfile
+ do_facet mds $LCTL nodemap_info > $tmpfile2
+
+ if ! $SHARED_KEY; then
+ # will conflict with SK's nodemaps
+ cleanup_and_setup_lustre
+ fi
+ # stop clients for this test
+ zconf_umount_clients $CLIENTS $MOUNT ||
+ error "unable to umount clients $CLIENTS"
+
+ do_facet mgs $LCTL nodemap_info > $tmpfile3
+ diff -q $tmpfile3 $tmpfile >& /dev/null ||
+ error "nodemap_info diff on MGS after remount"
+
+ do_facet mds $LCTL nodemap_info > $tmpfile4
+ diff -q $tmpfile4 $tmpfile2 >& /dev/null ||
+ error "nodemap_info diff on MDS after remount"
+
+ # cleanup nodemap
+ do_facet mgs $LCTL nodemap_del test25 ||
+ error "cannot delete nodemap test25 from config"
+ nodemap_test_cleanup
+ # restart clients previously stopped
+ zconf_mount_clients $CLIENTS $MOUNT ||
+ error "unable to mount clients $CLIENTS"
+
+ rm -f $tmpfile $tmpfile2
+ export SK_UNIQUE_NM=false
+}
+run_test 25 "test save and reload nodemap config"
+
+test_26() {
+ nodemap_version_check || return 0
+
+ local large_i=32000
+
+ do_facet mgs "seq -f 'c%g' $large_i | xargs -n1 $LCTL nodemap_add"
+ wait_nm_sync c$large_i admin_nodemap
+
+ do_facet mgs "seq -f 'c%g' $large_i | xargs -n1 $LCTL nodemap_del"
+ wait_nm_sync c$large_i admin_nodemap
+}
+run_test 26 "test transferring very large nodemap"
+
+nodemap_exercise_fileset() {
+ local nm="$1"
+ local loop=0
+
+ # setup
+ if [ "$nm" == "default" ]; then
+ do_facet mgs $LCTL nodemap_activate 1
+ wait_nm_sync active
+ else
+ nodemap_test_setup
+ fi
+ if $SHARED_KEY; then
+ export SK_UNIQUE_NM=true
+ else
+ # will conflict with SK's nodemaps
+ trap "fileset_test_cleanup $nm" EXIT
+ fi
+ fileset_test_setup "$nm"
+
+ # add fileset info to $nm nodemap
+ if ! combined_mgs_mds; then
+ do_facet mgs $LCTL set_param nodemap.${nm}.fileset=/$subdir ||
+ error "unable to add fileset info to $nm nodemap on MGS"
+ fi
+ do_facet mgs $LCTL set_param -P nodemap.${nm}.fileset=/$subdir ||
+ error "unable to add fileset info to $nm nodemap for servers"
+ wait_nm_sync $nm fileset "nodemap.${nm}.fileset=/$subdir"
+
+ # re-mount client
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount client ${clients_arr[0]}"
+ # set some generic fileset to trigger SSK code
+ export FILESET=/
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "unable to remount client ${clients_arr[0]}"
+ unset FILESET
+
+ # test mount point content
+ do_node ${clients_arr[0]} test -f $MOUNT/this_is_$subdir ||
+ error "fileset not taken into account"
+
+ # re-mount client with sub-subdir
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount client ${clients_arr[0]}"
+ export FILESET=/$subsubdir
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "unable to remount client ${clients_arr[0]}"
+ unset FILESET
+
+ # test mount point content
+ do_node ${clients_arr[0]} test -f $MOUNT/this_is_$subsubdir ||
+ error "subdir of fileset not taken into account"
+
+ # remove fileset info from nodemap
+ do_facet mgs $LCTL nodemap_set_fileset --name $nm --fileset clear ||
+ error "unable to delete fileset info on $nm nodemap"
+ wait_update_facet mgs "$LCTL get_param nodemap.${nm}.fileset" \
+ "nodemap.${nm}.fileset=" ||
+ error "fileset info still not cleared on $nm nodemap"
+ do_facet mgs $LCTL set_param -P nodemap.${nm}.fileset=clear ||
+ error "unable to reset fileset info on $nm nodemap"
+ wait_nm_sync $nm fileset "nodemap.${nm}.fileset="
+
+ # re-mount client
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount client ${clients_arr[0]}"
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "unable to remount client ${clients_arr[0]}"
+
+ # test mount point content
+ if ! $(do_node ${clients_arr[0]} test -d $MOUNT/$subdir); then
+ ls $MOUNT
+ error "fileset not cleared on $nm nodemap"
+ fi
+
+ # back to non-nodemap setup
+ if $SHARED_KEY; then
+ export SK_UNIQUE_NM=false
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount client ${clients_arr[0]}"
+ fi
+ fileset_test_cleanup "$nm"
+ if [ "$nm" == "default" ]; then
+ do_facet mgs $LCTL nodemap_activate 0
+ wait_nm_sync active 0
+ trap 0
+ export SK_UNIQUE_NM=false
+ else
+ nodemap_test_cleanup
+ fi
+ if $SHARED_KEY; then
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "unable to remount client ${clients_arr[0]}"
+ fi
+}
+
+test_27a() {
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS >= 2.11.50"
+
+ for nm in "default" "c0"; do
+ local subdir="subdir_${nm}"
+ local subsubdir="subsubdir_${nm}"
+
+ if [ "$nm" == "default" ] && [ "$SHARED_KEY" == "true" ]; then
+ echo "Skipping nodemap $nm with SHARED_KEY";
+ continue;
+ fi
+
+ echo "Exercising fileset for nodemap $nm"
+ nodemap_exercise_fileset "$nm"
+ done
+}
+run_test 27a "test fileset in various nodemaps"
+
+test_27b() { #LU-10703
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS >= 2.11.50"
+ [[ $MDSCOUNT -lt 2 ]] && skip "needs >= 2 MDTs"
+
+ nodemap_test_setup
+ trap nodemap_test_cleanup EXIT
+
+ # Add the nodemaps and set their filesets
+ for i in $(seq 1 $MDSCOUNT); do
+ do_facet mgs $LCTL nodemap_del nm$i 2>/dev/null
+ do_facet mgs $LCTL nodemap_add nm$i ||
+ error "add nodemap nm$i failed"
+ wait_nm_sync nm$i "" "" "-N"
+
+ if ! combined_mgs_mds; then
+ do_facet mgs \
+ $LCTL set_param nodemap.nm$i.fileset=/dir$i ||
+ error "set nm$i.fileset=/dir$i failed on MGS"
+ fi
+ do_facet mgs $LCTL set_param -P nodemap.nm$i.fileset=/dir$i ||
+ error "set nm$i.fileset=/dir$i failed on servers"
+ wait_nm_sync nm$i fileset "nodemap.nm$i.fileset=/dir$i"
+ done
+
+ # Check if all the filesets are correct
+ for i in $(seq 1 $MDSCOUNT); do
+ fileset=$(do_facet mds$i \
+ $LCTL get_param -n nodemap.nm$i.fileset)
+ [ "$fileset" = "/dir$i" ] ||
+ error "nm$i.fileset $fileset != /dir$i on mds$i"
+ do_facet mgs $LCTL nodemap_del nm$i ||
+ error "delete nodemap nm$i failed"
+ done
+
+ nodemap_test_cleanup
+}
+run_test 27b "The new nodemap won't clear the old nodemap's fileset"
+
+test_28() {
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test" && return
+ fi
+ mkdir -p $DIR/$tdir || error "mkdir failed"
+ touch $DIR/$tdir/$tdir.out || error "touch failed"
+ if [ ! -f $DIR/$tdir/$tdir.out ]; then
+ error "read before rotation failed"
+ fi
+ # store top key identity to ensure rotation has occurred
+ SK_IDENTITY_OLD=$(lctl get_param *.*.*srpc* | grep "expire" |
+ head -1 | awk '{print $15}' | cut -c1-8)
+ do_facet $SINGLEMDS lfs flushctx ||
+ error "could not run flushctx on $SINGLEMDS"
+ sleep 5
+ lfs flushctx || error "could not run flushctx on client"
+ sleep 5
+ # verify new key is in place
+ SK_IDENTITY_NEW=$(lctl get_param *.*.*srpc* | grep "expire" |
+ head -1 | awk '{print $15}' | cut -c1-8)
+ if [ $SK_IDENTITY_OLD == $SK_IDENTITY_NEW ]; then
+ error "key did not rotate correctly"
+ fi
+ if [ ! -f $DIR/$tdir/$tdir.out ]; then
+ error "read after rotation failed"
+ fi
+}
+run_test 28 "check shared key rotation method"
+
+test_29() {
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test" && return
+ fi
+ if [ $SK_FLAVOR != "ski" ] && [ $SK_FLAVOR != "skpi" ]; then
+ skip "test only valid if integrity is active"
+ fi
+ rm -r $DIR/$tdir
+ mkdir $DIR/$tdir || error "mkdir"
+ touch $DIR/$tdir/$tfile || error "touch"
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount clients"
+ do_node ${clients_arr[0]} "keyctl show |
+ awk '/lustre/ { print \\\$1 }' | xargs -IX keyctl unlink X"
+ OLD_SK_PATH=$SK_PATH
+ export SK_PATH=/dev/null
+ if zconf_mount_clients ${clients_arr[0]} $MOUNT; then
+ export SK_PATH=$OLD_SK_PATH
+ do_node ${clients_arr[0]} "ls $DIR/$tdir/$tfile"
+ if [ $? -eq 0 ]; then
+ error "able to mount and read without key"
+ else
+ error "able to mount without key"
+ fi
+ else
+ export SK_PATH=$OLD_SK_PATH
+ do_node ${clients_arr[0]} "keyctl show |
+ awk '/lustre/ { print \\\$1 }' |
+ xargs -IX keyctl unlink X"
+ fi
+ zconf_mount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to mount clients"
+}
+run_test 29 "check for missing shared key"
+
+test_30() {
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test" && return
+ fi
+ if [ $SK_FLAVOR != "ski" ] && [ $SK_FLAVOR != "skpi" ]; then
+ skip "test only valid if integrity is active"
+ fi
+ mkdir -p $DIR/$tdir || error "mkdir failed"
+ touch $DIR/$tdir/$tdir.out || error "touch failed"
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount clients"
+ # unload keys from ring
+ do_node ${clients_arr[0]} "keyctl show |
+ awk '/lustre/ { print \\\$1 }' | xargs -IX keyctl unlink X"
+ # generate key with bogus filesystem name
+ do_node ${clients_arr[0]} "lgss_sk -w $SK_PATH/$FSNAME-bogus.key \
+ -f $FSNAME.bogus -t client -d /dev/urandom" ||
+ error "lgss_sk failed (1)"
+ do_facet $SINGLEMDS lfs flushctx || error "could not run flushctx"
+ OLD_SK_PATH=$SK_PATH
+ export SK_PATH=$SK_PATH/$FSNAME-bogus.key
+ if zconf_mount_clients ${clients_arr[0]} $MOUNT; then
+ SK_PATH=$OLD_SK_PATH
+ do_node ${clients_arr[0]} "ls $DIR/$tdir/$tdir.out"
+ if [ $? -eq 0 ]; then
+ error "mount and read file with invalid key"
+ else
+ error "mount with invalid key"
+ fi
+ fi
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to umount clients"
+ # unload keys from ring
+ do_node ${clients_arr[0]} "keyctl show |
+ awk '/lustre/ { print \\\$1 }' | xargs -IX keyctl unlink X"
+ rm -f $SK_PATH
+ SK_PATH=$OLD_SK_PATH
+ zconf_mount_clients ${clients_arr[0]} $MOUNT ||
+ error "unable to mount clients"
+}
+run_test 30 "check for invalid shared key"
+
+basic_ios() {
+ local flvr=$1
+
+ mkdir -p $DIR/$tdir || error "mkdir $flvr"
+ touch $DIR/$tdir/f0 || error "touch $flvr"
+ ls $DIR/$tdir || error "ls $flvr"
+ dd if=/dev/zero of=$DIR/$tdir/f0 conv=fsync bs=1M count=10 \
+ >& /dev/null || error "dd $flvr"
+ rm -f $DIR/$tdir/f0 || error "rm $flvr"
+ rmdir $DIR/$tdir || error "rmdir $flvr"
+
+ sync ; sync
+ echo 3 > /proc/sys/vm/drop_caches
+}
+
+test_30b() {
+ local save_flvr=$SK_FLAVOR
+
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test"
+ fi
+
+ stack_trap restore_to_default_flavor EXIT
+
+ for flvr in skn ska ski skpi; do
+ # set flavor
+ SK_FLAVOR=$flvr
+ restore_to_default_flavor || error "cannot set $flvr flavor"
+ SK_FLAVOR=$save_flvr
+
+ basic_ios $flvr
+ done
+}
+run_test 30b "basic test of all different SSK flavors"
+
+cleanup_31() {
+ # unmount client
+ zconf_umount $HOSTNAME $MOUNT || error "unable to umount client"
+
+ # remove ${NETTYPE}999 network on all nodes
+ do_nodes $(comma_list $(all_nodes)) \
+ "$LNETCTL net del --net ${NETTYPE}999 && \
+ $LNETCTL lnet unconfigure 2>/dev/null || true"
+
+ # necessary to do writeconf in order to de-register
+ # @${NETTYPE}999 nid for targets
+ KZPOOL=$KEEP_ZPOOL
+ export KEEP_ZPOOL="true"
+ stopall
+ export SK_MOUNTED=false
+ writeconf_all
+ setupall || echo 1
+ export KEEP_ZPOOL="$KZPOOL"
+}
+
+test_31() {
+ local nid=$(lctl list_nids | grep ${NETTYPE} | head -n1)
+ local addr=${nid%@*}
+ local net=${nid#*@}
+
+ export LNETCTL=$(which lnetctl 2> /dev/null)
+
+ [ -z "$LNETCTL" ] && skip "without lnetctl support." && return
+ local_mode && skip "in local mode."
+
+ stack_trap cleanup_31 EXIT
+
+ # umount client
+ if [ "$MOUNT_2" ] && $(grep -q $MOUNT2' ' /proc/mounts); then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ if $(grep -q $MOUNT' ' /proc/mounts); then
+ umount_client $MOUNT || error "umount $MOUNT failed"
+ fi
+
+ # check exports on servers are empty for client
+ do_facet mgs "lctl get_param -n *.MGS*.exports.'$nid'.uuid 2>/dev/null |
+ grep -q -" && error "export on MGS should be empty"
+ do_nodes $(comma_list $(mdts_nodes) $(osts_nodes)) \
+ "lctl get_param -n *.${FSNAME}*.exports.'$nid'.uuid \
+ 2>/dev/null | grep -q -" &&
+ error "export on servers should be empty"
+
+ # add network ${NETTYPE}999 on all nodes
+ do_nodes $(comma_list $(all_nodes)) \
+ "$LNETCTL lnet configure && $LNETCTL net add --if \
+ \$($LNETCTL net show --net $net | awk 'BEGIN{inf=0} \
+ {if (inf==1) print \$2; fi; inf=0} /interfaces/{inf=1}') \
+ --net ${NETTYPE}999" ||
+ error "unable to configure NID ${NETTYPE}999"
+
+ # necessary to do writeconf in order to register
+ # new @${NETTYPE}999 nid for targets
+ KZPOOL=$KEEP_ZPOOL
+ export KEEP_ZPOOL="true"
+ stopall
+ export SK_MOUNTED=false
+ writeconf_all
+ setupall server_only || echo 1
+ export KEEP_ZPOOL="$KZPOOL"
+
+ # backup MGSNID
+ local mgsnid_orig=$MGSNID
+ # compute new MGSNID
+ MGSNID=$(do_facet mgs "$LCTL list_nids | grep ${NETTYPE}999")
+
+ # on client, turn LNet Dynamic Discovery on
+ lnetctl set discovery 1
+
+ # mount client with -o network=${NETTYPE}999 option:
+ # should fail because of LNet Dynamic Discovery
+ mount_client $MOUNT ${MOUNT_OPTS},network=${NETTYPE}999 &&
+ error "client mount with '-o network' option should be refused"
+
+ # on client, reconfigure LNet and turn LNet Dynamic Discovery off
+ $LNETCTL net del --net ${NETTYPE}999 && lnetctl lnet unconfigure
+ lustre_rmmod
+ modprobe lnet
+ lnetctl set discovery 0
+ modprobe ptlrpc
+ $LNETCTL lnet configure && $LNETCTL net add --if \
+ $($LNETCTL net show --net $net | awk 'BEGIN{inf=0} \
+ {if (inf==1) print $2; fi; inf=0} /interfaces/{inf=1}') \
+ --net ${NETTYPE}999 ||
+ error "unable to configure NID ${NETTYPE}999 on client"
+
+ # mount client with -o network=${NETTYPE}999 option
+ mount_client $MOUNT ${MOUNT_OPTS},network=${NETTYPE}999 ||
+ error "unable to remount client"
+
+ # restore MGSNID
+ MGSNID=$mgsnid_orig
+
+ # check export on MGS
+ do_facet mgs "lctl get_param -n *.MGS*.exports.'$nid'.uuid 2>/dev/null |
+ grep -q -"
+ [ $? -ne 0 ] || error "export for $nid on MGS should not exist"
+
+ do_facet mgs \
+ "lctl get_param -n *.MGS*.exports.'${addr}@${NETTYPE}999'.uuid \
+ 2>/dev/null | grep -q -"
+ [ $? -eq 0 ] ||
+ error "export for ${addr}@${NETTYPE}999 on MGS should exist"
+
+ # check {mdc,osc} imports
+ lctl get_param mdc.${FSNAME}-*.import | grep current_connection |
+ grep -q ${NETTYPE}999
+ [ $? -eq 0 ] ||
+ error "import for mdc should use ${addr}@${NETTYPE}999"
+ lctl get_param osc.${FSNAME}-*.import | grep current_connection |
+ grep -q ${NETTYPE}999
+ [ $? -eq 0 ] ||
+ error "import for osc should use ${addr}@${NETTYPE}999"
+}
+run_test 31 "client mount option '-o network'"
+
+cleanup_32() {
+ # umount client
+ zconf_umount_clients ${clients_arr[0]} $MOUNT
+
+ # disable sk flavor enforcement on MGS
+ set_rule _mgs any any null
+
+ # stop gss daemon on MGS
+ if ! combined_mgs_mds ; then
+ send_sigint $mgs_HOST lsvcgssd
+ fi
+
+ # re-mount client
+ MOUNT_OPTS=$(add_sk_mntflag $MOUNT_OPTS)
+ mountcli
+
+ restore_to_default_flavor
+}
+
+test_32() {
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test"
+ fi
+
+ stack_trap cleanup_32 EXIT
+
+ # restore to default null flavor
+ save_flvr=$SK_FLAVOR
+ SK_FLAVOR=null
+ restore_to_default_flavor || error "cannot set null flavor"
+ SK_FLAVOR=$save_flvr
+
+ # umount client
+ if [ "$MOUNT_2" ] && $(grep -q $MOUNT2' ' /proc/mounts); then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ if $(grep -q $MOUNT' ' /proc/mounts); then
+ umount_client $MOUNT || error "umount $MOUNT failed"
+ fi
+
+ # start gss daemon on MGS
+ if combined_mgs_mds ; then
+ send_sigint $mds_HOST lsvcgssd
+ fi
+ start_gss_daemons $mgs_HOST "$LSVCGSSD -vvv -s -g"
+
+ # add mgs key type and MGS NIDs in key on MGS
+ do_nodes $mgs_HOST "lgss_sk -t mgs,server -g $MGSNID -m \
+ $SK_PATH/$FSNAME.key >/dev/null 2>&1" ||
+ error "could not modify keyfile on MGS"
+
+ # load modified key file on MGS
+ do_nodes $mgs_HOST "lgss_sk -l $SK_PATH/$FSNAME.key >/dev/null 2>&1" ||
+ error "could not load keyfile on MGS"
+
+ # add MGS NIDs in key on client
+ do_nodes ${clients_arr[0]} "lgss_sk -g $MGSNID -m \
+ $SK_PATH/$FSNAME.key >/dev/null 2>&1" ||
+ error "could not modify keyfile on MGS"
+
+ # set perms for per-nodemap keys else permission denied
+ do_nodes $(comma_list $(all_nodes)) \
+ "keyctl show | grep lustre | cut -c1-11 |
+ sed -e 's/ //g;' |
+ xargs -IX keyctl setperm X 0x3f3f3f3f"
+
+ # re-mount client with mgssec=skn
+ save_opts=$MOUNT_OPTS
+ if [ -z "$MOUNT_OPTS" ]; then
+ MOUNT_OPTS="-o mgssec=skn"
+ else
+ MOUNT_OPTS="$MOUNT_OPTS,mgssec=skn"
+ fi
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "mount ${clients_arr[0]} with mgssec=skn failed"
+ MOUNT_OPTS=$save_opts
+
+ # umount client
+ zconf_umount_clients ${clients_arr[0]} $MOUNT ||
+ error "umount ${clients_arr[0]} failed"
+
+ # enforce ska flavor on MGS
+ set_rule _mgs any any ska
+
+ # re-mount client without mgssec
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS &&
+ error "mount ${clients_arr[0]} without mgssec should fail"
+
+ # re-mount client with mgssec=skn
+ save_opts=$MOUNT_OPTS
+ if [ -z "$MOUNT_OPTS" ]; then
+ MOUNT_OPTS="-o mgssec=skn"
+ else
+ MOUNT_OPTS="$MOUNT_OPTS,mgssec=skn"
+ fi
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS &&
+ error "mount ${clients_arr[0]} with mgssec=skn should fail"
+ MOUNT_OPTS=$save_opts
+
+ # re-mount client with mgssec=ska
+ save_opts=$MOUNT_OPTS
+ if [ -z "$MOUNT_OPTS" ]; then
+ MOUNT_OPTS="-o mgssec=ska"
+ else
+ MOUNT_OPTS="$MOUNT_OPTS,mgssec=ska"
+ fi
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "mount ${clients_arr[0]} with mgssec=ska failed"
+ MOUNT_OPTS=$save_opts
+
+ exit 0
+}
+run_test 32 "check for mgssec"
+
+cleanup_33() {
+ # disable sk flavor enforcement
+ set_rule $FSNAME any cli2mdt null
+ wait_flavor cli2mdt null
+
+ # umount client
+ zconf_umount_clients ${clients_arr[0]} $MOUNT
+
+ # stop gss daemon on MGS
+ if ! combined_mgs_mds ; then
+ send_sigint $mgs_HOST lsvcgssd
+ fi
+
+ # re-mount client
+ MOUNT_OPTS=$(add_sk_mntflag $MOUNT_OPTS)
+ mountcli
+
+ restore_to_default_flavor
+}
+
+test_33() {
+ if ! $SHARED_KEY; then
+ skip "need shared key feature for this test"
+ fi
+
+ stack_trap cleanup_33 EXIT
+
+ # restore to default null flavor
+ save_flvr=$SK_FLAVOR
+ SK_FLAVOR=null
+ restore_to_default_flavor || error "cannot set null flavor"
+ SK_FLAVOR=$save_flvr
+
+ # umount client
+ if [ "$MOUNT_2" ] && $(grep -q $MOUNT2' ' /proc/mounts); then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ if $(grep -q $MOUNT' ' /proc/mounts); then
+ umount_client $MOUNT || error "umount $MOUNT failed"
+ fi
+
+ # start gss daemon on MGS
+ if combined_mgs_mds ; then
+ send_sigint $mds_HOST lsvcgssd
+ fi
+ start_gss_daemons $mgs_HOST "$LSVCGSSD -vvv -s -g"
+
+ # add mgs key type and MGS NIDs in key on MGS
+ do_nodes $mgs_HOST "lgss_sk -t mgs,server -g $MGSNID -m \
+ $SK_PATH/$FSNAME.key >/dev/null 2>&1" ||
+ error "could not modify keyfile on MGS"
+
+ # load modified key file on MGS
+ do_nodes $mgs_HOST "lgss_sk -l $SK_PATH/$FSNAME.key >/dev/null 2>&1" ||
+ error "could not load keyfile on MGS"
+
+ # add MGS NIDs in key on client
+ do_nodes ${clients_arr[0]} "lgss_sk -g $MGSNID -m \
+ $SK_PATH/$FSNAME.key >/dev/null 2>&1" ||
+ error "could not modify keyfile on MGS"
+
+ # set perms for per-nodemap keys else permission denied
+ do_nodes $(comma_list $(all_nodes)) \
+ "keyctl show | grep lustre | cut -c1-11 |
+ sed -e 's/ //g;' |
+ xargs -IX keyctl setperm X 0x3f3f3f3f"
+
+ # re-mount client with mgssec=skn
+ save_opts=$MOUNT_OPTS
+ if [ -z "$MOUNT_OPTS" ]; then
+ MOUNT_OPTS="-o mgssec=skn"
+ else
+ MOUNT_OPTS="$MOUNT_OPTS,mgssec=skn"
+ fi
+ zconf_mount_clients ${clients_arr[0]} $MOUNT $MOUNT_OPTS ||
+ error "mount ${clients_arr[0]} with mgssec=skn failed"
+ MOUNT_OPTS=$save_opts
+
+ # enforce ska flavor for cli2mdt
+ set_rule $FSNAME any cli2mdt ska
+ wait_flavor cli2mdt ska
+
+ # check error message
+ $LCTL dk | grep "faked source" &&
+ error "MGS connection srpc flags incorrect"
+
+ exit 0
+}
+run_test 33 "correct srpc flags for MGS connection"
+
+cleanup_34_deny() {
+ # restore deny_unknown
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property deny_unknown --value $denydefault
+ if [ $? -ne 0 ]; then
+ error_noexit "cannot reset deny_unknown on default nodemap"
+ return
+ fi
+
+ wait_nm_sync default deny_unknown
+}
+
+test_34() {
+ local denynew
+ local activedefault
+
+ [ $MGS_VERSION -lt $(version_code 2.12.51) ] &&
+ skip "deny_unknown on default nm not supported before 2.12.51"
+
+ activedefault=$(do_facet mgs $LCTL get_param -n nodemap.active)
+
+ if [[ "$activedefault" != "1" ]]; then
+ do_facet mgs $LCTL nodemap_activate 1
+ wait_nm_sync active
+ stack_trap cleanup_active EXIT
+ fi
+
+ denydefault=$(do_facet mgs $LCTL get_param -n \
+ nodemap.default.deny_unknown)
+ [ -z "$denydefault" ] &&
+ error "cannot get deny_unknown on default nodemap"
+ if [ "$denydefault" -eq 0 ]; then
+ denynew=1;
+ else
+ denynew=0;
+ fi
+
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property deny_unknown --value $denynew ||
+ error "cannot set deny_unknown on default nodemap"
+
+ [ "$(do_facet mgs $LCTL get_param -n nodemap.default.deny_unknown)" \
+ -eq $denynew ] ||
+ error "setting deny_unknown on default nodemap did not work"
+
+ stack_trap cleanup_34_deny EXIT
+
+ wait_nm_sync default deny_unknown
+}
+run_test 34 "deny_unknown on default nodemap"
+
+test_35() {
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.13.50) ] ||
+ skip "Need MDS >= 2.13.50"
+
+ # activate changelogs
+ changelog_register || error "changelog_register failed"
+ local cl_user="${CL_USERS[$SINGLEMDS]%% *}"
+ changelog_users $SINGLEMDS | grep -q $cl_user ||
+ error "User $cl_user not found in changelog_users"
+ changelog_chmask ALL
+
+ # do some IOs
+ mkdir $DIR/$tdir || error "failed to mkdir $tdir"
+ touch $DIR/$tdir/$tfile || error "failed to touch $tfile"
+
+ # access changelogs with root
+ changelog_dump || error "failed to dump changelogs"
+ changelog_clear 0 || error "failed to clear changelogs"
+
+ # put clients in non-admin nodemap
+ nodemap_test_setup
+ stack_trap nodemap_test_cleanup EXIT
+ for i in $(seq 0 $((num_clients-1))); do
+ do_facet mgs $LCTL nodemap_modify --name c${i} \
+ --property admin --value 0
+ done
+ for i in $(seq 0 $((num_clients-1))); do
+ wait_nm_sync c${i} admin_nodemap
+ done
+
+ # access with mapped root
+ changelog_dump && error "dump changelogs should have failed"
+ changelog_clear 0 && error "clear changelogs should have failed"
+
+ exit 0
+}
+run_test 35 "Check permissions when accessing changelogs"
+
+setup_for_enc_tests() {
+ # remount client with test_dummy_encryption option
+ if is_mounted $MOUNT; then
+ umount_client $MOUNT || error "umount $MOUNT failed"
+ fi
+ mount_client $MOUNT ${MOUNT_OPTS},test_dummy_encryption ||
+ error "mount with '-o test_dummy_encryption' failed"
+
+ # this directory will be encrypted, because of dummy mode
+ mkdir $DIR/$tdir
+}
+
+cleanup_for_enc_tests() {
+ # remount client normally
+ if is_mounted $MOUNT; then
+ umount_client $MOUNT || error "umount $MOUNT failed"
+ fi
+ mount_client $MOUNT ${MOUNT_OPTS} ||
+ error "remount failed"
+
+ if is_mounted $MOUNT2; then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ if [ "$MOUNT_2" ]; then
+ mount_client $MOUNT2 ${MOUNT_OPTS} ||
+ error "remount failed"
+ fi
+}
+
+cleanup_nodemap_after_enc_tests() {
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property forbid_encryption --value 1
+ wait_nm_sync default forbid_encryption
+ do_facet mgs $LCTL nodemap_activate 0
+ wait_nm_sync active
+}
+
+test_36() {
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+
+ # first make sure it is possible to enable encryption
+ # when nodemap is not active
+ setup_for_enc_tests
+ rmdir $DIR/$tdir
+ umount_client $MOUNT || error "umount $MOUNT failed (1)"
+
+ # then activate nodemap, and retry
+ # should succeed as encryption is not forbidden on default nodemap
+ # by default
+ stack_trap cleanup_nodemap_after_enc_tests EXIT
+ do_facet mgs $LCTL nodemap_activate 1
+ wait_nm_sync active
+ forbid=$(do_facet mgs lctl get_param -n nodemap.default.forbid_encryption)
+ [ $forbid -eq 0 ] || error "wrong default value for forbid_encryption"
+ mount_client $MOUNT ${MOUNT_OPTS},test_dummy_encryption ||
+ error "mount '-o test_dummy_encryption' failed with default"
+ umount_client $MOUNT || error "umount $MOUNT failed (2)"
+
+ # then forbid encryption, and retry
+ do_facet mgs $LCTL nodemap_modify --name default \
+ --property forbid_encryption --value 1
+ wait_nm_sync default forbid_encryption
+ mount_client $MOUNT ${MOUNT_OPTS},test_dummy_encryption &&
+ error "mount '-o test_dummy_encryption' should have failed"
+ return 0
+}
+run_test 36 "control if clients can use encryption"
+
+test_37() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local objdump=$TMP/objdump
+ local objid
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ [ "$ost1_FSTYPE" = ldiskfs ] || skip "ldiskfs only test (using debugfs)"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write a few bytes in file
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync
+ do_facet ost1 "sync; sync"
+
+ # check that content on ost is encrypted
+ objid=$($LFS getstripe $testfile | awk '/obdidx/{getline; print $2}')
+ do_facet ost1 "$DEBUGFS -c -R 'cat O/0/d$(($objid % 32))/$objid' \
+ $(ostdevname 1)" > $objdump
+ cmp -s $objdump $tmpfile &&
+ error "file $testfile is not encrypted on ost"
+
+ # check that in-memory representation of file is correct
+ cmp -bl ${tmpfile} ${testfile} ||
+ error "file $testfile is corrupted in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl ${tmpfile} ${testfile} ||
+ error "file $testfile is corrupted on server"
+
+ rm -f $tmpfile $objdump
+}
+run_test 37 "simple encrypted file"
+
+test_38() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local objid
+ local blksz
+ local srvsz=0
+ local filesz
+ local bsize
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # get block size on ost
+ blksz=$($LCTL get_param osc.$FSNAME*.import |
+ awk '/grant_block_size:/ { print $2; exit; }')
+ # write a few bytes in file at offset $blksz
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$blksz \
+ oflag=seek_bytes conv=fsync
+
+ # check that in-memory representation of file is correct
+ bsize=$(stat --format=%B $testfile)
+ filesz=$(stat --format=%b $testfile)
+ filesz=$((filesz*bsize))
+ [ $filesz -le $blksz ] ||
+ error "file $testfile is $filesz long in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ bsize=$(stat --format=%B $testfile)
+ filesz=$(stat --format=%b $testfile)
+ filesz=$((filesz*bsize))
+ [ $filesz -le $blksz ] ||
+ error "file $testfile is $filesz long on server"
+
+ rm -f $tmpfile
+}
+run_test 38 "encrypted file with hole"
+
+test_39() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write a few bytes in file
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync
+
+ # write a few more bytes in the same page
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=1024 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ dd if=$tmpfile of=$tmpfile bs=4 count=1 seek=1024 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server"
+
+ rm -f $tmpfile
+}
+run_test 39 "rewrite data in already encrypted page"
+
+test_40() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local tmpfile2=$TMP/abc2
+ local seek
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ [[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write a few bytes in file
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory (1)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (1)"
+
+ # write a few other bytes in same page
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=256 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ dd if=$tmpfile of=$tmpfile bs=4 count=1 seek=256 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory (2)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (2)"
+
+ rm -f $testfile $tmpfile
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # write a few bytes in file, at end of first page
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ seek=$(getconf PAGESIZE)
+ seek=$((seek - 4))
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # write a few other bytes at beginning of first page
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync,notrunc
+
+ dd if=$tmpfile of=$tmpfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory (3)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (3)"
+
+ rm -f $testfile $tmpfile
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # write a few bytes in file, at beginning of second page
+ echo "abc" > $tmpfile
+ $LFS setstripe -c1 -i0 $testfile
+ seek=$(getconf PAGESIZE)
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # write a few other bytes at end of first page
+ seek=$((seek - 4))
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted in memory (4)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted on server (4)"
+
+ rm -f $testfile $tmpfile $tmpfile2
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # write a few bytes in file, at beginning of first stripe
+ echo "abc" > $tmpfile
+ $LFS setstripe -S 256k -c2 $testfile
+ dd if=$tmpfile of=$testfile bs=4 count=1 conv=fsync,notrunc
+
+ # write a few other bytes, at beginning of second stripe
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=262144 oflag=seek_bytes \
+ conv=fsync,notrunc
+ dd if=$tmpfile of=$tmpfile bs=4 count=1 seek=262144 oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory (5)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (5)"
+
+ rm -f $tmpfile
+}
+run_test 40 "exercise size of encrypted file"
+
+test_41() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local tmpfile2=$TMP/abc2
+ local seek
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ echo "abc" > $tmpfile
+ seek=$(getconf PAGESIZE)
+ seek=$((seek - 204))
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync
+ seek=$(getconf PAGESIZE)
+ seek=$((seek + 1092))
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # write a few bytes in file
+ $LFS setstripe -c1 -i0 -S 256k $testfile
+ seek=$(getconf PAGESIZE)
+ seek=$((seek - 204))
+ #define OBD_FAIL_OST_WR_ATTR_DELAY 0x250
+ do_facet ost1 "$LCTL set_param fail_loc=0x250 fail_val=15"
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync &
+
+ sleep 5
+ # write a few other bytes, at a different offset
+ seek=$(getconf PAGESIZE)
+ seek=$((seek + 1092))
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc &
+ wait
+ do_facet ost1 "$LCTL set_param fail_loc=0x0"
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted in memory (1)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted on server (1)"
+
+ rm -f $tmpfile $tmpfile2
+}
+run_test 41 "test race on encrypted file size (1)"
+
+test_42() {
+ local testfile=$DIR/$tdir/$tfile
+ local testfile2=$DIR2/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local tmpfile2=$TMP/abc2
+ local pagesz=$(getconf PAGESIZE)
+ local seek
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ if is_mounted $MOUNT2; then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ mount_client $MOUNT2 ${MOUNT_OPTS},test_dummy_encryption ||
+ error "mount2 with '-o test_dummy_encryption' failed"
+
+ # create file by writting one whole page
+ $LFS setstripe -c1 -i0 -S 256k $testfile
+ dd if=/dev/zero of=$testfile bs=$pagesz count=1 conv=fsync
+
+ # read file from 2nd mount point
+ cat $testfile2 > /dev/null
+
+ echo "abc" > $tmpfile
+ dd if=/dev/zero of=$tmpfile2 bs=$pagesz count=1 conv=fsync
+ seek=$((2*pagesz - 204))
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ seek=$((2*pagesz + 1092))
+ dd if=$tmpfile of=$tmpfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+
+ # write a few bytes in file from 1st mount point
+ seek=$((2*pagesz - 204))
+ #define OBD_FAIL_OST_WR_ATTR_DELAY 0x250
+ do_facet ost1 "$LCTL set_param fail_loc=0x250 fail_val=15"
+ dd if=$tmpfile of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc &
+
+ sleep 5
+ # write a few other bytes, at a different offset from 2nd mount point
+ seek=$((2*pagesz + 1092))
+ dd if=$tmpfile of=$testfile2 bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc &
+ wait
+ do_facet ost1 "$LCTL set_param fail_loc=0x0"
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted in memory (1)"
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile2 $testfile2 ||
+ error "file $testfile is corrupted in memory (2)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile2 $testfile ||
+ error "file $testfile is corrupted on server (1)"
+
+ rm -f $tmpfile $tmpfile2
+}
+run_test 42 "test race on encrypted file size (2)"
+
+test_43() {
+ local testfile=$DIR/$tdir/$tfile
+ local testfile2=$DIR2/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local tmpfile2=$TMP/abc2
+ local resfile=$TMP/res
+ local pagesz=$(getconf PAGESIZE)
+ local seek
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ if is_mounted $MOUNT2; then
+ umount_client $MOUNT2 || error "umount $MOUNT2 failed"
+ fi
+ mount_client $MOUNT2 ${MOUNT_OPTS},test_dummy_encryption ||
+ error "mount2 with '-o test_dummy_encryption' failed"
+
+ # create file
+ tr '\0' '1' < /dev/zero |
+ dd of=$tmpfile bs=$pagesz count=1 conv=fsync
+ $LFS setstripe -c1 -i0 -S 256k $testfile
+ cp $tmpfile $testfile
+
+ # read file from 2nd mount point
+ cat $testfile2 > /dev/null
+
+ # write a few bytes in file from 1st mount point
+ echo "abc" > $tmpfile2
+ seek=$((2*pagesz - 204))
+ #define OBD_FAIL_OST_WR_ATTR_DELAY 0x250
+ do_facet ost1 "$LCTL set_param fail_loc=0x250 fail_val=15"
+ dd if=$tmpfile2 of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc &
+
+ sleep 5
+ # read file from 2nd mount point
+ dd if=$testfile2 of=$resfile bs=$pagesz count=1 conv=fsync,notrunc
+ cmp -bl $tmpfile $resfile ||
+ error "file $testfile is corrupted in memory (1)"
+
+ wait
+ do_facet ost1 "$LCTL set_param fail_loc=0x0"
+
+ # check that in-memory representation of file is correct
+ dd if=$tmpfile2 of=$tmpfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ cmp -bl $tmpfile $testfile2 ||
+ error "file $testfile is corrupted in memory (2)"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server (1)"
+
+ rm -f $tmpfile $tmpfile2
+}
+run_test 43 "test race on encrypted file size (3)"
+
+test_44() {
+ local testfile=$DIR/$tdir/$tfile
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ which vmtouch || skip "This test needs vmtouch utility"
+
+ # Direct I/O is not supported on encrypted files.
+ # Attempts to use direct I/O on such files should fall back to
+ # buffered I/O.
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write a page in file with O_DIRECT
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=/dev/urandom of=$testfile bs=4096 count=1 conv=fsync oflag=direct
+
+ respage=$(vmtouch $testfile | awk '/Resident\ Pages:/ {print $3}')
+ [ "$respage" == "1/1" ] ||
+ error "write to enc file did not fall back to buffered IO"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ dd if=$testfile of=/dev/null bs=4096 count=1 iflag=direct
+
+ respage=$(vmtouch $testfile | awk '/Resident\ Pages:/ {print $3}')
+ [ "$respage" == "1/1" ] ||
+ error "write to enc file did not fall back to buffered IO"
+}
+run_test 44 "encrypted file access semantics: direct IO"
+
+test_45() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/junk
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ $LFS setstripe -c1 -i0 $testfile
+ dd if=/dev/zero of=$testfile bs=512K count=1
+ $MULTIOP $testfile OSMRUc || error "$MULTIOP $testfile failed (1)"
+ $MULTIOP $testfile OSMWUc || error "$MULTIOP $testfile failed (2)"
+
+ dd if=/dev/zero of=$tmpfile bs=512K count=1
+ $MULTIOP $tmpfile OSMWUc || error "$MULTIOP $tmpfile failed"
+ $MMAP_CAT $tmpfile > ${tmpfile}2
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ $MMAP_CAT $testfile > ${testfile}2
+ cmp -bl ${tmpfile}2 ${testfile}2 ||
+ error "file $testfile is corrupted"
+
+ rm -f $tmpfile ${tmpfile}2
+}
+run_test 45 "encrypted file access semantics: MMAP"
+
+test_46() {
+ local testdir=$DIR/$tdir/mydir
+ local testfile=$testdir/myfile
+ local lsfile=$TMP/lsfile
+ local scrambleddir
+ local scrambledfile
+
+ local testfile2=$DIR/$tdir/${tfile}.2
+ local tmpfile=$DIR/junk
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ touch $DIR/onefile
+ touch $DIR/$tdir/$tfile
+ mkdir $testdir
+ echo test > $testfile
+ sync ; echo 3 > /proc/sys/vm/drop_caches
+
+ # remove fscrypt key from keyring
+ keyctl revoke $(keyctl show | awk '$7 ~ "^fscrypt:" {print $1}')
+ keyctl reap
+
+ scrambleddir=$(find $DIR/$tdir/ -maxdepth 1 -mindepth 1 -type d)
+ ls -1 $scrambleddir > $lsfile || error "ls $testdir failed"
+
+ scrambledfile=$scrambleddir/$(head -n 1 $lsfile)
+ stat $scrambledfile || error "stat $scrambledfile failed"
+ rm -f $lsfile
+
+ cat $scrambledfile && error "cat $scrambledfile should have failed"
+
+ touch $scrambleddir/otherfile &&
+ error "touch otherfile should have failed"
+ ls $scrambleddir/otherfile && error "otherfile should not exist"
+ mkdir $scrambleddir/otherdir &&
+ error "mkdir otherdir should have failed"
+ ls -d $scrambleddir/otherdir && error "otherdir should not exist"
+
+ rm -f $scrambledfile || error "rm $scrambledfile failed"
+ rmdir $scrambleddir || error "rmdir $scrambleddir failed"
+
+ rm -f $DIR/onefile
+}
+run_test 46 "encrypted file access semantics without key"
+
+test_47() {
+ local testfile=$DIR/$tdir/$tfile
+ local testfile2=$DIR/$tdir/${tfile}.2
+ local tmpfile=$DIR/junk
+ local scrambleddir
+ local scrambledfile
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ dd if=/dev/zero of=$tmpfile bs=512K count=1
+ mrename $tmpfile $testfile &&
+ error "rename from unencrypted to encrypted dir should fail"
+
+ ln $tmpfile $testfile &&
+ error "link from unencrypted to encrypted dir should fail"
+
+ cp $tmpfile $testfile ||
+ error "cp from unencrypted to encrypted dir should succeed"
+ rm -f $tmpfile
+
+ mrename $testfile $testfile2 ||
+ error "rename from within encrypted dir should succeed"
+
+ ln $testfile2 $testfile ||
+ error "link from within encrypted dir should succeed"
+ rm -f $testfile
+
+ ln $testfile2 $tmpfile ||
+ error "link from encrypted to unencrypted dir should succeed"
+ rm -f $tmpfile
+
+ mrename $testfile2 $tmpfile ||
+ error "rename from encrypted to unencrypted dir should succeed"
+
+ dd if=/dev/zero of=$testfile bs=512K count=1
+ mkdir $DIR/$tdir/mydir
+ sync ; echo 3 > /proc/sys/vm/drop_caches
+
+ # remove fscrypt key from keyring
+ keyctl revoke $(keyctl show | awk '$7 ~ "^fscrypt:" {print $1}')
+ keyctl reap
+
+ scrambleddir=$(find $DIR/$tdir/ -maxdepth 1 -mindepth 1 -type d)
+ scrambledfile=$(find $DIR/$tdir/ -maxdepth 1 -type f)
+ ln $scrambledfile $scrambleddir/linkfile &&
+ error "ln linkfile should have failed"
+ mrename $scrambledfile $DIR/onefile2 &&
+ error "mrename from $scrambledfile should have failed"
+ touch $DIR/onefile
+ mrename $DIR/onefile $scrambleddir/otherfile &&
+ error "mrename to $scrambleddir should have failed"
+
+ rm -f $tmpfile $DIR/onefile
+}
+run_test 47 "encrypted file access semantics: rename/link"
+
+test_48a() {
+ local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/111
+ local tmpfile2=$TMP/abc
+ local pagesz=$(getconf PAGESIZE)
+ local sz
+ local seek
+ local scrambledfile
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # create file, 4 x PAGE_SIZE long
+ tr '\0' '1' < /dev/zero |
+ dd of=$tmpfile bs=4x$pagesz count=1 conv=fsync
+ $LFS setstripe -c1 -i0 $testfile
+ cp $tmpfile $testfile
+ echo "abc" > $tmpfile2
+
+ # decrease size: truncate to PAGE_SIZE
+ $TRUNCATE $tmpfile $pagesz
+ $TRUNCATE $testfile $pagesz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (1)"
+
+ # increase size: truncate to 2 x PAGE_SIZE
+ sz=$((pagesz*2))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (2)"
+
+ # write in 2nd page
+ seek=$((pagesz+100))
+ dd if=$tmpfile2 of=$tmpfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ dd if=$tmpfile2 of=$testfile bs=4 count=1 seek=$seek oflag=seek_bytes \
+ conv=fsync,notrunc
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (3)"
+
+ # truncate to PAGE_SIZE / 2
+ sz=$((pagesz/2))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (4)"
+
+ # lockless truncate should be turned into regular truncate for enc file
+ save_lustre_params client "osc.*.lockless_truncate" > $save
+ # restore lockless_truncate default values on exit
+ stack_trap "restore_lustre_params < $save; rm -f $save" EXIT
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ lctl set_param -n osc.*.lockless_truncate 1
+ cancel_lru_locks osc
+ clear_stats osc.*.osc_stats
+ $TRUNCATE $testfile 8000000 || error "truncate failed (1)"
+ [ $(calc_stats osc.*.osc_stats lockless_truncate) -eq 0 ] ||
+ error "lockless truncate should be turned into regular truncate"
+ lctl set_param -n osc.*.lockless_truncate 0
+
+ # truncate to a smaller, non-multiple of PAGE_SIZE, non-multiple of 16
+ sz=$((sz-7))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (5)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, non-multiple of 16
+ sz=$((sz+18))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (6)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, in a different page
+ sz=$((sz+pagesz+30))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (7)"
+
+ sync ; echo 3 > /proc/sys/vm/drop_caches
+
+ # remove fscrypt key from keyring
+ keyctl revoke $(keyctl show | awk '$7 ~ "^fscrypt:" {print $1}')
+ keyctl reap
+
+ scrambledfile=$(find $DIR/$tdir/ -maxdepth 1 -type f)
+ $TRUNCATE $scrambledfile 0 &&
+ error "truncate $scrambledfile should have failed without key"
+
+ rm -f $tmpfile $tmpfile2
+}
+run_test 48a "encrypted file access semantics: truncate"
+
+cleanup_for_enc_tests_othercli() {
+ local othercli=$1
+
+ # remount othercli normally
+ zconf_umount $othercli $MOUNT ||
+ error "umount $othercli $MOUNT failed"
+ zconf_mount $othercli $MOUNT ||
+ error "remount $othercli $MOUNT failed"
+}
+
+test_48b() {
+ local othercli
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ [ "$num_clients" -ge 2 ] || skip "Need at least 2 clients"
+
+ if [ "$HOSTNAME" == ${clients_arr[0]} ]; then
+ othercli=${clients_arr[1]}
+ else
+ othercli=${clients_arr[0]}
+ fi
+
+ stack_trap cleanup_for_enc_tests EXIT
+ stack_trap "cleanup_for_enc_tests_othercli $othercli" EXIT
+ setup_for_enc_tests
+ zconf_umount $othercli $MOUNT ||
+ error "umount $othercli $MOUNT failed"
+
+ cp /bin/sleep $DIR/$tdir/
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ $DIR/$tdir/sleep 30 &
+ # mount and IOs must be done in the same shell session, otherwise
+ # encryption key in session keyring is missing
+ do_node $othercli "$MOUNT_CMD -o ${MOUNT_OPTS},test_dummy_encryption \
+ $MGSNID:/$FSNAME $MOUNT && \
+ $TRUNCATE $DIR/$tdir/sleep 7"
+ wait || error "wait error"
+ cmp --silent /bin/sleep $DIR/$tdir/sleep ||
+ error "/bin/sleep and $DIR/$tdir/sleep differ"
+}
+run_test 48b "encrypted file: concurrent truncate"
+
+trace_cmd() {
+ local cmd="$@"
+ local xattr_name="security.c"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ $LCTL set_param debug=+info
+ $LCTL clear
+
+ echo $cmd
+ eval $cmd
+
+ $LCTL dk | grep -E "get xattr '${xattr_name}'|get xattrs"
+ [ $? -ne 0 ] || error "get xattr event was triggered"
+}
+
+test_49() {
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ local dirname=$DIR/$tdir/subdir
+
+ mkdir $dirname
+
+ trace_cmd stat $dirname
+ trace_cmd touch $dirname/f1
+ trace_cmd stat $dirname/f1
+ trace_cmd cat $dirname/f1
+ dd if=/dev/zero of=$dirname/f1 bs=1M count=10 conv=fsync
+ trace_cmd $TRUNCATE $dirname/f1 10240
+ trace_cmd $LFS setstripe -E -1 -S 4M $dirname/f2
+ trace_cmd $LFS migrate -E -1 -S 256K $dirname/f2
+ trace_cmd $LFS setdirstripe -i 1 $dirname/d2
+ trace_cmd $LFS migrate -m 0 $dirname/d2
+
+ $LFS setdirstripe -i 1 -c 1 $dirname/d3
+ dirname=$dirname/d3/subdir
+ mkdir $dirname
+
+ trace_cmd stat $dirname
+ trace_cmd touch $dirname/f1
+ trace_cmd stat $dirname/f1
+ trace_cmd cat $dirname/f1
+ dd if=/dev/zero of=$dirname/f1 bs=1M count=10 conv=fsync
+ trace_cmd $TRUNCATE $dirname/f1 10240
+ trace_cmd $LFS setstripe -E -1 -S 4M $dirname/f2
+ trace_cmd $LFS migrate -E -1 -S 256K $dirname/f2
+}
+run_test 49 "Avoid getxattr for encryption context"
+
+test_50() {
+ local testfile=$DIR/$tdir/$tfile
+ local tmpfile=$TMP/abc
+ local pagesz=$(getconf PAGESIZE)
+ local sz
+
+ $LCTL get_param mdc.*.import | grep -q client_encryption ||
+ skip "client encryption not supported"
+
+ mount.lustre --help |& grep -q "test_dummy_encryption:" ||
+ skip "need dummy encryption support"
+
+ stack_trap cleanup_for_enc_tests EXIT
+ setup_for_enc_tests
+
+ # write small file, data on MDT only
+ tr '\0' '1' < /dev/zero |
+ dd of=$tmpfile bs=1 count=5000 conv=fsync
+ $LFS setstripe -E 1M -L mdt -E EOF $testfile
+ cp $tmpfile $testfile
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server"
+
+ # decrease size: truncate to PAGE_SIZE
+ $TRUNCATE $tmpfile $pagesz
+ $TRUNCATE $testfile $pagesz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (1)"
+
+ # increase size: truncate to 2 x PAGE_SIZE
+ sz=$((pagesz*2))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (2)"
+
+ # truncate to PAGE_SIZE / 2
+ sz=$((pagesz/2))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (3)"
+
+ # truncate to a smaller, non-multiple of PAGE_SIZE, non-multiple of 16
+ sz=$((sz-7))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (4)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, non-multiple of 16
+ sz=$((sz+18))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (5)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, in a different page
+ sz=$((sz+pagesz+30))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (6)"
+
+ rm -f $testfile
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # write hole in file, data spread on MDT and OST
+ tr '\0' '2' < /dev/zero |
+ dd of=$tmpfile bs=1 count=1539 seek=1539074 conv=fsync,notrunc
+ $LFS setstripe -E 1M -L mdt -E EOF $testfile
+ cp --sparse=always $tmpfile $testfile
+
+ # check that in-memory representation of file is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted in memory"
+
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+
+ # check that file read from server is correct
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted on server"
+
+ # truncate to a smaller, non-multiple of PAGE_SIZE, non-multiple of 16,
+ # inside OST part of data
+ sz=$((1024*1024+13))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (7)"
+
+ # truncate to a smaller, non-multiple of PAGE_SIZE, non-multiple of 16,
+ # inside MDT part of data
+ sz=7
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (8)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, non-multiple of 16,
+ # inside MDT part of data
+ sz=$((1024*1024-13))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (9)"
+
+ # truncate to a larger, non-multiple of PAGE_SIZE, non-multiple of 16,
+ # inside OST part of data
+ sz=$((1024*1024+7))
+ $TRUNCATE $tmpfile $sz
+ $TRUNCATE $testfile $sz
+ cancel_lru_locks osc ; cancel_lru_locks mdc
+ cmp -bl $tmpfile $testfile ||
+ error "file $testfile is corrupted (10)"
+
+ rm -f $tmpfile
+}
+run_test 50 "DoM encrypted file"
+
+log "cleanup: ======================================================"
+
+sec_unsetup() {
+ for num in $(seq $MDSCOUNT); do
+ if [ "${identity_old[$num]}" = 1 ]; then
+ switch_identity $num false || identity_old[$num]=$?
+ fi
+ done
+
+ $RUNAS_CMD -u $ID0 ls $DIR
+ $RUNAS_CMD -u $ID1 ls $DIR
+}
+sec_unsetup