# skipped tests: LU-8411 LU-9096 LU-9054 ..
ALWAYS_EXCEPT=" 407 253 312 $ALWAYS_EXCEPT"
+if $SHARED_KEY; then
+# bug number for skipped tests: LU-9795 (all below)
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 17n 60a 133g 300f"
+fi
+
+if [[ $(uname -m) = aarch64 ]]; then
+ # bug number: LU-11596 (all below)
+ ALWAYS_EXCEPT+=" 42d 42e 63a 63b 64a 64b 64c"
+ # bug number: LU-11671 LU-11594 LU-11667 LU-11729
+ ALWAYS_EXCEPT+=" 45 103a 317 810"
+fi
+
# Check Grants after these tests
GRANT_CHECK_LIST="$GRANT_CHECK_LIST 42a 42b 42c 42d 42e 63a 63b 64a 64b 64c"
-
SRCDIR=$(cd $(dirname $0); echo $PWD)
export PATH=$PATH:/sbin
. $LUSTRE/tests/test-framework.sh
init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/${NAME}.sh}
+get_lustre_env
init_logging
-if [[ $MDSCOUNT -gt 1 ]]; then
- # bug number: LU-11161
- ALWAYS_EXCEPT+=" 160g"
-fi
-
# 5 12 (min)"
[ "$SLOW" = "no" ] && EXCEPT_SLOW="27m 64b 68 71 115 300o"
-if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
+if [ "$mds1_FSTYPE" = "zfs" ]; then
# bug number for skipped test: LU-1957
ALWAYS_EXCEPT="$ALWAYS_EXCEPT 180"
# 13 (min)"
if [[ $ubuntu_version -gt $(version_code 16.0.0) ]]; then
# bug number for skipped test:
- # LU-10334 LU-10335 LU-10335 LU-10335
- ALWAYS_EXCEPT+=" 103a 130a 130b 130c"
- # LU-10335 LU-10335 LU-10366
- ALWAYS_EXCEPT+=" 130d 130e 410"
+ # LU-10334 LU-10366
+ ALWAYS_EXCEPT+=" 103a 410"
fi
fi
fi
rm -rf $DIR/[Rdfs][0-9]*
# $RUNAS_ID may get set incorrectly somewhere else
-[ $UID -eq 0 -a $RUNAS_ID -eq 0 ] && error "\$RUNAS_ID set to 0, but \$UID is also 0!"
+[ $UID -eq 0 -a $RUNAS_ID -eq 0 ] &&
+ error "\$RUNAS_ID set to 0, but \$UID is also 0!"
check_runas_id $RUNAS_ID $RUNAS_GID $RUNAS
run_test 0c "check import proc"
test_0d() { # LU-3397
- [ $(lustre_version_code mgs) -lt $(version_code 2.10.57) ] &&
+ [ $MGS_VERSION -lt $(version_code 2.10.57) ] &&
skip "proc exports not supported before 2.10.57"
local mgs_exp="mgs.MGS.exports"
# Compare the value of client version
exp_client_version=$(awk '/target_version:/ { print $2 }' $temp_exp)
exp_val=$(version_code $exp_client_version)
- imp_val=$(lustre_version_code client)
+ imp_val=$CLIENT_VERSION
[ "$exp_val" == "$imp_val" ] ||
error "export client version '$exp_val' != '$imp_val'"
}
local TESTS="59 60 61 4094 4095"
# Fix for inode size boundary in 2.1.4
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.1.4) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.1.4) ] &&
TESTS="4094 4095"
# Patch not applied to 2.2 or 2.3 branches
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.0) ] &&
- [ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.3.55) ] &&
+ [ $MDS1_VERSION -ge $(version_code 2.2.0) ] &&
+ [ $MDS1_VERSION -le $(version_code 2.3.55) ] &&
TESTS="4094 4095"
# skip long symlink name for rhel6.5.
# LU-1540
test_17m() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip_env "ldiskfs only test"
+ [ "$mds1_FSTYPE" != "ldiskfs" ] && skip_env "ldiskfs only test"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.0) ] &&
- [ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.2.93) ] &&
+ [ $MDS1_VERSION -ge $(version_code 2.2.0) ] &&
+ [ $MDS1_VERSION -le $(version_code 2.2.93) ] &&
skip "MDS 2.2.0-2.2.93 do not NUL-terminate symlinks"
local short_sym="0123456789"
test_17n() {
[[ $MDSCOUNT -lt 2 ]] && skip_env "needs >= 2 MDTs"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip_env "ldiskfs only test"
+ [ "$mds1_FSTYPE" != "ldiskfs" ] && skip_env "ldiskfs only test"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.0) ] &&
- [ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.2.93) ] &&
+ [ $MDS1_VERSION -ge $(version_code 2.2.0) ] &&
+ [ $MDS1_VERSION -le $(version_code 2.2.93) ] &&
skip "MDS 2.2.0-2.2.93 do not NUL-terminate symlinks"
local i
check_fs_consistency_17n ||
error "e2fsck report error after unlink files under remote dir"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.50) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.4.50) ] &&
skip "lustre < 2.4.50 does not support migrate mv"
for ((i = 0; i < 10; i++)); do
test_17o() {
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.64) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.3.64) ] &&
skip "Need MDS version at least 2.3.64"
local wdir=$DIR/${tdir}o
}
run_test 24u "create stripe file"
-page_size() {
- local size
- size=$(getconf PAGE_SIZE 2>/dev/null)
- echo -n ${size:-4096}
-}
-
simple_cleanup_common() {
local rc=0
trap 0
local fname="$DIR/$tdir/$tfile"
# Performance issue on ZFS see LU-4072 (c.f. LU-2887)
- [ $(facet_fstype $SINGLEMDS) = "zfs" ] && nrfiles=${COUNT:-10000}
+ [ "$mds1_FSTYPE" = "zfs" ] && nrfiles=${COUNT:-10000}
test_mkdir "$(dirname $fname)"
# assume MDT0000 has the fewest inodes
# take into account of overhead in lu_dirpage header and end mark in
# each page, plus one in rpc_num calculation.
local dirent_size=$((32 + (${#tfile} | 7) + 1 + 8))
- local page_entries=$((($(page_size) - 24) / dirent_size))
+ local page_entries=$(((PAGE_SIZE - 24) / dirent_size))
local mdt_idx=$($LFS getdirstripe -i $(dirname $fname))
local rpc_pages=$(max_pages_per_rpc $mdt_idx)
local rpc_max=$((nrfiles / (page_entries * rpc_pages) + stripes))
test_24x() {
[[ $MDSCOUNT -lt 2 ]] && skip_env "needs >= 2 MDTs"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.56) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.7.56) ]] &&
skip "Need MDS version at least 2.7.56"
local MDTIDX=1
test_27e() {
# LU-5839 adds check for existed layout before setting it
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.56) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.7.56) ]] &&
skip "Need MDS version at least 2.7.56"
test_mkdir $DIR/$tdir
test_27f() {
test_mkdir $DIR/$tdir
$LFS setstripe -S 100 -i 0 -c 1 $DIR/$tdir/$tfile &&
- error "$SETSTRIPE $DIR/$tdir/$tfile failed"
+ error "$LFS setstripe $DIR/$tdir/$tfile failed"
$CHECKSTAT -t file $DIR/$tdir/$tfile &&
error "$CHECKSTAT -t file $DIR/$tdir/$tfile should fail"
dd if=/dev/zero of=$DIR/$tdir/$tfile bs=4k count=4 || error "dd failed"
do_facet $mfacet lctl get_param osc.$mdtosc_proc2.prealloc*
test_mkdir -p $DIR/$tdir/${OST}
- $SETSTRIPE -i $OSTIDX -c 1 $DIR/$tdir/${OST}
+ $LFS setstripe -i $OSTIDX -c 1 $DIR/$tdir/${OST}
#define OBD_FAIL_OST_ENOSPC 0x215
do_facet $ofacet lctl set_param fail_val=$FAILIDX fail_loc=0x215
echo "Creating to objid $last_id on ost $OST..."
check_seq_oid()
{
- log "check file $1"
-
- lmm_count=$($GETSTRIPE -c $1)
- lmm_seq=$($GETSTRIPE -v $1 | awk '/lmm_seq/ { print $2 }')
- lmm_oid=$($GETSTRIPE -v $1 | awk '/lmm_object_id/ { print $2 }')
-
- local old_ifs="$IFS"
- IFS=$'[:]'
- fid=($($LFS path2fid $1))
- IFS="$old_ifs"
-
- log "FID seq ${fid[1]}, oid ${fid[2]} ver ${fid[3]}"
- log "LOV seq $lmm_seq, oid $lmm_oid, count: $lmm_count"
-
- # compare lmm_seq and lu_fid->f_seq
- [ $lmm_seq = ${fid[1]} ] || { error "SEQ mismatch"; return 1; }
- # compare lmm_object_id and lu_fid->oid
- [ $lmm_oid = ${fid[2]} ] || { error "OID mismatch"; return 2; }
-
- # check the trusted.fid attribute of the OST objects of the file
- local have_obdidx=false
- local stripe_nr=0
- $GETSTRIPE $1 | while read obdidx oid hex seq; do
- # skip lines up to and including "obdidx"
- [ -z "$obdidx" ] && break
- [ "$obdidx" = "obdidx" ] && have_obdidx=true && continue
- $have_obdidx || continue
+ log "check file $1"
+
+ lmm_count=$($LFS getstripe -c $1)
+ lmm_seq=$($LFS getstripe -v $1 | awk '/lmm_seq/ { print $2 }')
+ lmm_oid=$($LFS getstripe -v $1 | awk '/lmm_object_id/ { print $2 }')
+
+ local old_ifs="$IFS"
+ IFS=$'[:]'
+ fid=($($LFS path2fid $1))
+ IFS="$old_ifs"
+
+ log "FID seq ${fid[1]}, oid ${fid[2]} ver ${fid[3]}"
+ log "LOV seq $lmm_seq, oid $lmm_oid, count: $lmm_count"
+
+ # compare lmm_seq and lu_fid->f_seq
+ [ $lmm_seq = ${fid[1]} ] || { error "SEQ mismatch"; return 1; }
+ # compare lmm_object_id and lu_fid->oid
+ [ $lmm_oid = ${fid[2]} ] || { error "OID mismatch"; return 2; }
+
+ # check the trusted.fid attribute of the OST objects of the file
+ local have_obdidx=false
+ local stripe_nr=0
+ $LFS getstripe $1 | while read obdidx oid hex seq; do
+ # skip lines up to and including "obdidx"
+ [ -z "$obdidx" ] && break
+ [ "$obdidx" = "obdidx" ] && have_obdidx=true && continue
+ $have_obdidx || continue
local ost=$((obdidx + 1))
local dev=$(ostdevname $ost)
error "FF stripe $ff_pstripe != $stripe_nr"
stripe_nr=$((stripe_nr + 1))
- [ $(lustre_version_code client) -lt $(version_code 2.9.55) ] &&
+ [ $CLIENT_VERSION -lt $(version_code 2.9.55) ] &&
continue
if grep -q 'stripe_count=' <<<$ff; then
local ff_scnt=$(sed -e 's/.*stripe_count=//' \
save_layout_restore_at_exit $MOUNT
$LFS setstripe -c 0 -i -1 -S 0 $MOUNT
- wait_update $HOSTNAME "$GETSTRIPE -c $MOUNT | sed 's/ *//g'" "1" 20 ||
- error "stripe count $($GETSTRIPE -c $MOUNT) != 1"
- local default_size=$($GETSTRIPE -S $MOUNT)
- local default_offset=$($GETSTRIPE -i $MOUNT)
+ wait_update $HOSTNAME "$LFS getstripe -c $MOUNT | sed 's/ *//g'" "1" 20 ||
+ error "stripe count $($LFS getstripe -c $MOUNT) != 1"
+ local default_size=$($LFS getstripe -S $MOUNT)
+ local default_offset=$($LFS getstripe -i $MOUNT)
local dsize=$(do_facet $SINGLEMDS \
"$LCTL get_param -n lod.$(facet_svc $SINGLEMDS)*.stripesize")
[ $default_size -eq $dsize ] ||
cd $DIR/$tdir
for i in $(seq 0 $((OSTCOUNT - 1))); do
# set stripe across all OSTs starting from OST$i
- $SETSTRIPE -i $i -c -1 $tfile$i
+ $LFS setstripe -i $i -c -1 $tfile$i
# get striping information
- ost_idx=($($GETSTRIPE $tfile$i |
+ ost_idx=($($LFS getstripe $tfile$i |
tail -n $((OSTCOUNT + 1)) | awk '{print $1}'))
echo ${ost_idx[@]}
pool_add_targets $POOL $ost_range || error "pool_add_targets failed"
local skip27D
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.8.55) ] &&
skip27D+="-s 29"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.9.55) -o \
- $(lustre_version_code client) -lt $(version_code 2.9.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.9.55) -o \
+ $CLIENT_VERSION -lt $(version_code 2.9.55) ] &&
skip27D+=" -s 30,31"
llapi_layout_test -d$DIR/$tdir -p$POOL -o$OSTCOUNT $skip27D ||
error "llapi_layout_test failed"
# accessing a widely striped file.
test_27E() {
[ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs"
- [ $(lustre_version_code client) -lt $(version_code 2.5.57) ] &&
+ [ $CLIENT_VERSION -lt $(version_code 2.5.57) ] &&
skip "client does not have LU-3338 fix"
# 72 bytes is the minimum space required to store striping
test_27F() { # LU-5346/LU-7975
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[[ $OSTCOUNT -lt 2 ]] && skip "needs >= 2 OSTs"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.51) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.8.51) ]] &&
skip "Need MDS version at least 2.8.51"
remote_ost_nodsh && skip "remote OST with nodsh"
test_mkdir $DIR/$tdir
rm -f $DIR/$tdir/f0
- $SETSTRIPE -c 2 $DIR/$tdir
+ $LFS setstripe -c 2 $DIR/$tdir
# stop all OSTs to reproduce situation for LU-7975 ticket
for num in $(seq $OSTCOUNT); do
wait $catpid || error "cat failed"
cmp /etc/hosts $DIR/$tdir/f0 || error "cmp failed"
- [[ $($GETSTRIPE -c $DIR/$tdir/f0) == 2 ]] || error "wrong stripecount"
+ [[ $($LFS getstripe -c $DIR/$tdir/f0) == 2 ]] ||
+ error "wrong stripecount"
}
run_test 27F "Client resend delayed layout creation with non-zero size"
run_test 27G "Clear OST pool from stripe"
test_27H() {
- [[ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.11.54) ]] &&
+ [[ $MDS1_VERSION -le $(version_code 2.11.54) ]] &&
skip "Need MDS version newer than 2.11.54"
[[ $OSTCOUNT -lt 3 ]] && skip_env "needs >= 3 OSTs"
test_mkdir $DIR/$tdir
egrep -c "l_ost_idx: [02]$") == "2" )) ||
error "expected l_ost_idx: [02]$ not matched"
- # make sure ost list have been cleared
- local stripesize=$($GETSTRIPE -S $DIR/$tdir)
+ # make sure ost list has been cleared
+ local stripesize=$($LFS getstripe -S $DIR/$tdir)
$LFS setstripe -S $((stripesize * 4)) -i 1 \
-c $((OSTCOUNT - 1)) $DIR/$tdir || error "setstripe"
touch $DIR/$tdir/f3
set -vx
test_mkdir $DIR/d31f
- $SETSTRIPE -S 1048576 -c 1 $DIR/d31f
+ $LFS setstripe -S 1048576 -c 1 $DIR/d31f
cp /etc/hosts $DIR/d31f
ls -l $DIR/d31f
- $GETSTRIPE $DIR/d31f/hosts
+ $LFS getstripe $DIR/d31f/hosts
multiop_bg_pause $DIR/d31f D_c || return 1
MULTIPID=$!
rm -rv $DIR/d31f || error "first of $DIR/d31f"
test_mkdir $DIR/d31f
- $SETSTRIPE -S 1048576 -c 1 $DIR/d31f
+ $LFS setstripe -S 1048576 -c 1 $DIR/d31f
cp /etc/hosts $DIR/d31f
ls -l $DIR/d31f
- $GETSTRIPE $DIR/d31f/hosts
+ $LFS getstripe $DIR/d31f/hosts
multiop_bg_pause $DIR/d31f D_c || return 1
MULTIPID2=$!
test_34a() {
rm -f $DIR/f34
$MCREATE $DIR/f34 || error "mcreate failed"
- $GETSTRIPE $DIR/f34 2>&1 | grep -q "no stripe info" ||
+ $LFS getstripe $DIR/f34 2>&1 | grep -q "no stripe info" ||
error "getstripe failed"
$TRUNCATE $DIR/f34 $TEST_34_SIZE || error "truncate failed"
- $GETSTRIPE $DIR/f34 2>&1 | grep -q "no stripe info" ||
+ $LFS getstripe $DIR/f34 2>&1 | grep -q "no stripe info" ||
error "getstripe failed"
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 ||
error "Size of $DIR/f34 not equal to $TEST_34_SIZE bytes"
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 ||
error "Size of $DIR/f34 not equal to $TEST_34_SIZE bytes"
$OPENFILE -f O_RDONLY $DIR/f34
- $GETSTRIPE $DIR/f34 2>&1 | grep -q "no stripe info" ||
+ $LFS getstripe $DIR/f34 2>&1 | grep -q "no stripe info" ||
error "getstripe failed"
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 ||
error "Size of $DIR/f34 not equal to $TEST_34_SIZE bytes"
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 ||
error "Size of $DIR/f34 not equal to $TEST_34_SIZE bytes"
$OPENFILE -f O_RDWR $DIR/f34
- $GETSTRIPE $DIR/f34 2>&1 | grep -q "no stripe info" && error
+ $LFS getstripe $DIR/f34 2>&1 | grep -q "no stripe info" &&
+ error "$LFS getstripe failed"
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 ||
error "Size of $DIR/f34 not equal to $TEST_34_SIZE bytes"
}
# Since just timed wait is not good enough, let's do a sync write
# that way we are sure enough time for a roundtrip + processing
# passed + 2 seconds of extra margin.
- dd if=/dev/zero of=$DIR/${tfile}-1 bs=4096 oflag=direct count=1
+ dd if=/dev/zero of=$DIR/${tfile}-1 bs=$PAGE_SIZE oflag=direct count=1
rm $DIR/${tfile}-1
sleep 2
[ $PARALLEL == "yes" ] && skip "skip parallel run"
local TDIR=$DIR/${tdir}e
- local pagesz=$(page_size)
local pages=16 # hardcoded 16 pages, don't change it.
local files=$((OSTCOUNT * 500)) # hopefully 500 files on each OST
local proc_osc0="osc.${FSNAME}-OST0000-osc-[^MDT]*"
local warmup_files
test_mkdir $DIR/${tdir}e
- $SETSTRIPE -c 1 $TDIR
+ $LFS setstripe -c 1 $TDIR
createmany -o $TDIR/f $files
max_dirty_mb=$($LCTL get_param -n $proc_osc0/max_dirty_mb)
# write a large amount of data into one file and sync, to get good
# avail_grant number from OST.
for ((i=0; i<$warmup_files; i++)); do
- idx=$($GETSTRIPE -i $TDIR/w$i)
+ idx=$($LFS getstripe -i $TDIR/w$i)
[ $idx -ne 0 ] && continue
dd if=/dev/zero of=$TDIR/w$i bs="$max_dirty_mb"M count=1
break
# RPCs directly. but depends on the env, VFS may trigger flush during this
# period, hopefully we are good.
for ((i=0; i<$warmup_files; i++)); do
- idx=$($GETSTRIPE -i $TDIR/w$i)
+ idx=$($LFS getstripe -i $TDIR/w$i)
[ $idx -ne 0 ] && continue
dd if=/dev/zero of=$TDIR/w$i bs=1M count=1 2>/dev/null
done
# perform the real test
$LCTL set_param $proc_osc0/rpc_stats 0
for ((;i<$files; i++)); do
- [ $($GETSTRIPE -i $TDIR/f$i) -eq 0 ] || continue
- dd if=/dev/zero of=$TDIR/f$i bs=$pagesz count=$pages 2>/dev/null
+ [ $($LFS getstripe -i $TDIR/f$i) -eq 0 ] || continue
+ dd if=/dev/zero of=$TDIR/f$i bs=$PAGE_SIZE count=$pages 2>/dev/null
done
sync
$LCTL get_param $proc_osc0/rpc_stats
f="$DIR/f46"
stop_writeback
sync
- dd if=/dev/zero of=$f bs=`page_size` seek=511 count=1
+ dd if=/dev/zero of=$f bs=$PAGE_SIZE seek=511 count=1
sync
- dd conv=notrunc if=/dev/zero of=$f bs=`page_size` seek=1023 count=1
- dd conv=notrunc if=/dev/zero of=$f bs=`page_size` seek=511 count=1
+ dd conv=notrunc if=/dev/zero of=$f bs=$PAGE_SIZE seek=1023 count=1
+ dd conv=notrunc if=/dev/zero of=$f bs=$PAGE_SIZE seek=511 count=1
sync
start_writeback
}
# test_47 is removed "Device nodes check" is moved to test_28
test_48a() { # bug 2399
- [ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.63) ] &&
+ [ "$mds1_FSTYPE" = "zfs" ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.3.63) ] &&
skip "MDS prior to 2.3.63 handle ZFS dir .. incorrectly"
test_mkdir $DIR/$tdir
[[ $ost1_size -lt 2 ]] && ost1_size=2
[[ $ost1_size -gt 819200 ]] && ost1_size=819200
- $SETSTRIPE -c 1 -i 0 $DIR/$tfile
+ $LFS setstripe -c 1 -i 0 $DIR/$tfile
dd if=/dev/zero of=$DIR/$tfile bs=4k count=$((ost1_size >> 2)) &
local dd_pid=$!
run_test 51d "check object distribution"
test_51e() {
- if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip_env "ldiskfs only test"
fi
local found=false
local support_last_seq=true
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.60) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.3.60) ]] ||
support_last_seq=false
# only test MDT0000
f="$DIR/f54b"
mknod $f c 1 3
chmod 0666 $f
- dd if=/dev/zero of=$f bs=$(page_size) count=1
+ dd if=/dev/zero of=$f bs=$PAGE_SIZE count=1
}
run_test 54b "char device works in lustre ======================"
trap cleanup_54c EXIT
mknod $loopdev b 7 $LOOPNUM
echo "make a loop file system with $DIR/$tfile on $loopdev ($LOOPNUM)."
- dd if=/dev/zero of=$DIR/$tfile bs=$(get_page_size client) seek=1024 count=1 > /dev/null
+ dd if=/dev/zero of=$DIR/$tfile bs=$PAGE_SIZE seek=1024 count=1 > /dev/null
losetup $loopdev $DIR/$tfile ||
error "can't set up $loopdev for $DIR/$tfile"
mkfs.ext2 $loopdev || error "mke2fs on $loopdev"
test_mkdir $DIR/$tdir
mount -t ext2 $loopdev $DIR/$tdir ||
error "error mounting $loopdev on $DIR/$tdir"
- dd if=/dev/zero of=$DIR/$tdir/tmp bs=$(get_page_size client) count=30 ||
+ dd if=/dev/zero of=$DIR/$tdir/tmp bs=$PAGE_SIZE count=30 ||
error "dd write"
df $DIR/$tdir
- dd if=$DIR/$tdir/tmp of=/dev/zero bs=$(get_page_size client) count=30 ||
+ dd if=$DIR/$tdir/tmp of=/dev/zero bs=$PAGE_SIZE count=30 ||
error "dd read"
cleanup_54c
}
check_stripe_count $dir/file1 $expected
- if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.90) ];
+ if [ $MDS1_VERSION -ge $(version_code 2.6.90) ];
then
# lfs_migrate file onto OST 0 if it is on OST 1, or onto
# OST 1 if it is on OST 0. This file is small enough to
run_test 56wb "check lfs_migrate pool support"
test_56wc() {
- local file1="$DIR/$tdir/file 1"
+ local file1="$DIR/$tdir/file1"
echo -n "Creating test dir..."
test_mkdir $DIR/$tdir &> /dev/null || error "cannot create dir"
}
test_56xb() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
local dir="$DIR/$tdir"
run_test 56xb "lfs migration hard link support"
test_56y() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.53) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.4.53) ] &&
skip "No HSM $(lustre_build_version $SINGLEMDS) MDS < 2.4.53"
local res=""
run_test 56ab "lfs find --blocks"
test_56ba() {
+ [ $MDS1_VERSION -lt $(version_code 2.10.50) ] &&
+ skip "Need MDS version at least 2.10.50"
+
# Create composite files with one component
local dir=$DIR/$tdir
run_test 56ba "test lfs find --component-end, -start, -count, and -flags"
test_56ca() {
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.57) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.10.57) ]] ||
skip "Need MDS version at least 2.10.57"
local td=$DIR/$tdir
test_57a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
# note test will not do anything if MDS is not local
- if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip_env "ldiskfs only test"
fi
remote_mds_nodsh && skip "remote MDS with nodsh"
test_57b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip_env "ldiskfs only test"
fi
remote_mds_nodsh && skip "remote MDS with nodsh"
}
run_test 60a "llog_test run from kernel module and test llog_reader"
-test_60aa() {
- remote_mgs_nodsh && skip "remote MGS with nodsh"
-
- # test old logid format
- if [ $(lustre_version_code mgs) -le $(version_code 3.1.53) ]; then
- do_facet mgs $LCTL dl | grep MGS
- do_facet mgs "$LCTL --device %MGS llog_print \\\\\\\$$FSNAME-client" ||
- error "old llog_print failed"
- fi
-
- # test new logid format
- if [ $(lustre_version_code mgs) -ge $(version_code 2.9.53) ]; then
- do_facet mgs "$LCTL --device MGS llog_print $FSNAME-client" ||
- error "new llog_print failed"
- fi
-}
-run_test 60aa "llog_print works with FIDs and simple names"
-
-test_60ab() {
- # test llog_print with params
-
- [[ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.11.51) ]] ||
- skip "Need server version greater than 2.11.51"
-
- local yaml
- local orig_val
-
- orig_val=$(do_facet mgs $LCTL get_param jobid_name)
- do_facet mgs $LCTL set_param -P jobid_name="testname"
-
- yaml=$(do_facet mgs $LCTL --device MGS llog_print params |
- grep jobid_name | tail -n 1)
-
- local param=`awk '{ print $10 }' <<< "$yaml"`
- local val=`awk '{ print $12 }' <<< "$yaml"`
- #return to the default
- do_facet mgs $LCTL set_param -P jobid_name=$orig_val
- [ $val = "testname" ] || error "bad value: $val"
- [ $param = "jobid_name," ] || error "Bad param: $param"
-}
-run_test 60ab "llog_print params output values from set_param -P"
-
test_60b() { # bug 6411
[ $PARALLEL == "yes" ] && skip "skip parallel run"
dmesg > $DIR/$tfile
- LLOG_COUNT=$(dmesg | awk "/$TEST60_HEAD/ { marker = 1; from_marker = 0; }
- /llog.test/ {
- if (marker)
- from_marker++
- from_begin++
- }
- END {
- if (marker)
- print from_marker
- else
- print from_begin
- }")
- [[ $LLOG_COUNT -gt 100 ]] &&
+ LLOG_COUNT=$(do_facet mgs dmesg |
+ awk "/$TEST60_HEAD/ { marker = 1; from_marker = 0; }
+ /llog_[a-z]*.c:[0-9]/ {
+ if (marker)
+ from_marker++
+ from_begin++
+ }
+ END {
+ if (marker)
+ print from_marker
+ else
+ print from_begin
+ }")
+
+ [[ $LLOG_COUNT -gt 120 ]] &&
error "CDEBUG_LIMIT not limiting messages ($LLOG_COUNT)" || true
}
-run_test 60b "limit repeated messages from CERROR/CWARN ========"
+run_test 60b "limit repeated messages from CERROR/CWARN"
test_60c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
}
run_test 60e "no space while new llog is being created"
+test_60g() {
+ local pid
+
+ test_mkdir -c $MDSCOUNT $DIR/$tdir
+ $LFS setdirstripe -D -i -1 -c $MDSCOUNT $DIR/$tdir
+
+ (
+ local index=0
+ while true; do
+ mkdir $DIR/$tdir/subdir$index 2>/dev/null
+ rmdir $DIR/$tdir/subdir$index 2>/dev/null
+ index=$((index + 1))
+ done
+ ) &
+
+ pid=$!
+
+ for i in $(seq 100); do
+ # define OBD_FAIL_OSD_TXN_START 0x19a
+ do_facet mds1 lctl set_param fail_loc=0x8000019a
+ usleep 100
+ done
+
+ kill -9 $pid
+
+ mkdir $DIR/$tdir/new || error "mkdir failed"
+ rmdir $DIR/$tdir/new || error "rmdir failed"
+}
+run_test 60g "transaction abort won't cause MDT hung"
+
test_61() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
f="$DIR/f61"
- dd if=/dev/zero of=$f bs=$(page_size) count=1 || error "dd $f failed"
+ dd if=/dev/zero of=$f bs=$PAGE_SIZE count=1 || error "dd $f failed"
cancel_lru_locks osc
$MULTIOP $f OSMWUc || error "$MULTIOP $f failed"
sync
want_grant() {
local tgt=$1
- local page_size=$(get_page_size client)
-
local nrpages=$($LCTL get_param -n osc.${tgt}.max_pages_per_rpc)
local rpc_in_flight=$($LCTL get_param -n osc.${tgt}.max_rpcs_in_flight)
local dirty_max_pages=$($LCTL get_param -n osc.${tgt}.max_dirty_mb)
- dirty_max_pages=$((dirty_max_pages * 1024 * 1024 / page_size))
+ dirty_max_pages=$((dirty_max_pages * 1024 * 1024 / PAGE_SIZE))
[[ $dirty_max_pages -gt $nrpages ]] && nrpages=$dirty_max_pages
- local undirty=$((nrpages * page_size))
+ local undirty=$((nrpages * PAGE_SIZE))
local max_extent_pages
max_extent_pages=$($LCTL get_param osc.${tgt}.import |
grep grant_max_extent_size | awk '{print $2}')
- max_extent_pages=$((max_extent_pages / page_size))
+ max_extent_pages=$((max_extent_pages / PAGE_SIZE))
local nrextents=$(((nrpages + max_extent_pages - 1) / max_extent_pages))
local grant_extent_tax
grant_extent_tax=$($LCTL get_param osc.${tgt}.import |
}
test_64d() {
- [ $(lustre_version_code ost1) -lt $(version_code 2.10.56) ] &&
+ [ $OST1_VERSION -lt $(version_code 2.10.56) ] &&
skip "OST < 2.10.55 doesn't limit grants enough"
local tgt=$($LCTL dl | grep "0000-osc-[^mM]" | awk '{print $4}')
local max_cur_granted=$(($(want_grant $tgt) + $(grant_chunk $tgt)))
stack_trap "rm -f $file" EXIT
- $SETSTRIPE $file -i 0 -c 1
+ $LFS setstripe $file -i 0 -c 1
dd if=/dev/zero of=$file bs=1M count=1000 &
ddpid=$!
[ $PARALLEL == "yes" ] && skip "skip parallel run"
test_mkdir $DIR/$tdir
- local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
+ local STRIPESIZE=$($LFS getstripe -S $DIR/$tdir)
- $SETSTRIPE -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
+ $LFS setstripe -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
error "setstripe"
touch $DIR/$tdir/f2
$LVERIFY $DIR/$tdir $DIR/$tdir/f2 || error "lverify failed"
[ $OSTCOUNT -lt 2 ] && skip_env "need at least 2 OSTs"
test_mkdir $DIR/$tdir
- local stripesize=$($GETSTRIPE -S $DIR/$tdir)
+ local stripesize=$($LFS getstripe -S $DIR/$tdir)
$LFS setstripe -S $((stripesize * 4)) -i 1 \
-c $((OSTCOUNT - 1)) $DIR/$tdir || error "setstripe"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
test_mkdir $DIR/$tdir
- local STRIPECOUNT=$($GETSTRIPE -c $DIR/$tdir)
- local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
+ local STRIPECOUNT=$($LFS getstripe -c $DIR/$tdir)
+ local STRIPESIZE=$($LFS getstripe -S $DIR/$tdir)
if [[ $STRIPECOUNT -le 0 ]]; then
sc=1
else
sc=$(($STRIPECOUNT - 1))
fi
- $SETSTRIPE -S $STRIPESIZE -c $sc $DIR/$tdir || error "setstripe"
+ $LFS setstripe -S $STRIPESIZE -c $sc $DIR/$tdir || error "setstripe"
touch $DIR/$tdir/f4 $DIR/$tdir/f5
$LVERIFY $DIR/$tdir $DIR/$tdir/f4 $DIR/$tdir/f5 ||
error "lverify failed"
test_mkdir $DIR/$tdir
- $SETSTRIPE $DIR/$tdir || error "setstripe"
- $GETSTRIPE -v $DIR/$tdir | grep "Default" ||
+ $LFS setstripe $DIR/$tdir || error "setstripe"
+ $LFS getstripe -v $DIR/$tdir | grep "Default" ||
error "no stripe info failed"
touch $DIR/$tdir/f6
$LVERIFY $DIR/$tdir $DIR/$tdir/f6 || error "lverify failed"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
test_mkdir $DIR/${tdir}f
- $RUNAS $SETSTRIPE $DIR/${tdir}f && error "setstripe succeeded" || true
+ $RUNAS $LFS setstripe $DIR/${tdir}f &&
+ error "setstripe succeeded" || true
}
run_test 65f "dir setstripe permission (should return error) ==="
[ $PARALLEL == "yes" ] && skip "skip parallel run"
test_mkdir $DIR/$tdir
- local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
+ local STRIPESIZE=$($LFS getstripe -S $DIR/$tdir)
$LFS setstripe -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
error "setstripe -S failed"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
test_mkdir $DIR/$tdir
- local STRIPESIZE=$($GETSTRIPE -S $DIR/$tdir)
+ local STRIPESIZE=$($LFS getstripe -S $DIR/$tdir)
$LFS setstripe -S $((STRIPESIZE * 2)) -i 0 -c 1 $DIR/$tdir ||
error "setstripe -S failed"
test_mkdir $DIR/$tdir/dd1
- [ $($LFS getstripe -c $DIR/$tdir) = $($GETSTRIPE -c $DIR/$tdir/dd1) ] ||
+ [ $($LFS getstripe -c $DIR/$tdir) = $($LFS getstripe -c $DIR/$tdir/dd1) ] ||
error "stripe info inherit failed"
}
run_test 65h "directory stripe info inherit ===================="
save_layout_restore_at_exit $MOUNT
- $SETSTRIPE -d $MOUNT || error "setstripe failed"
+ $LFS setstripe -d $MOUNT || error "setstripe failed"
}
run_test 65j "set default striping on root directory (bug 6367)="
-cleaup_65k() {
+cleanup_65k() {
rm -rf $DIR/$tdir
wait_delete_completed
do_facet $SINGLEMDS "lctl set_param -n \
remote_mds_nodsh && skip "remote MDS with nodsh"
local disable_precreate=true
- [ $(lustre_version_code $SINGLEMDS) -le $(version_code 2.8.54) ] &&
+ [ $MDS1_VERSION -le $(version_code 2.8.54) ] &&
disable_precreate=false
echo "Check OST status: "
awk -F: /$ost/'{ print $1 }' | head -n 1)
mkdir -p $DIR/$tdir
- $SETSTRIPE -i $ostnum -c 1 $DIR/$tdir
+ $LFS setstripe -i $ostnum -c 1 $DIR/$tdir
createmany -o $DIR/$tdir/$tfile.$ostnum. 1000
echo "Deactivate: " $INACTIVE_OSC
for idx in $(seq 0 $((OSTCOUNT - 1))); do
[ -f $DIR/$tdir/$idx ] && continue
- echo "$SETSTRIPE -i $idx -c 1 $DIR/$tdir/$idx"
- $SETSTRIPE -i $idx -c 1 $DIR/$tdir/$idx ||
+ echo "$LFS setstripe -i $idx -c 1 $DIR/$tdir/$idx"
+ $LFS setstripe -i $idx -c 1 $DIR/$tdir/$idx ||
{ cleanup_65k;
error "setstripe $idx should succeed"; }
rm -f $DIR/$tdir/$idx || error "rm $idx failed"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
test_mkdir -p $DIR/$tdir/test_dir
- $SETSTRIPE -c -1 $DIR/$tdir/test_dir
+ $LFS setstripe -c -1 $DIR/$tdir/test_dir
$LFS find -mtime -1 $DIR/$tdir >/dev/null
}
run_test 65l "lfs find on -1 stripe dir ========================"
test_65m() {
local layout=$(save_layout $MOUNT)
- $RUNAS $SETSTRIPE -c 2 $MOUNT && {
+ $RUNAS $LFS setstripe -c 2 $MOUNT && {
restore_layout $MOUNT $layout
error "setstripe should fail by non-root users"
}
}
run_test 65m "normal user can't set filesystem default stripe"
+test_65n() {
+ [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.12.50) ]] ||
+ skip "Need MDS version at least 2.12.50"
+ [[ $PARALLEL != "yes" ]] || skip "skip parallel run"
+
+ [[ $OSTCOUNT -ge 2 ]] || skip_env "needs >= 2 OSTs"
+ which getfattr > /dev/null 2>&1 || skip_env "no getfattr command"
+ which setfattr > /dev/null 2>&1 || skip_env "no setfattr command"
+
+ local root_layout=$(save_layout $MOUNT)
+ stack_trap "restore_layout $MOUNT $root_layout" EXIT
+
+ # new subdirectory under root directory should not inherit
+ # the default layout from root
+ local dir1=$MOUNT/$tdir-1
+ mkdir $dir1 || error "mkdir $dir1 failed"
+ ! getfattr -n trusted.lov $dir1 &> /dev/null ||
+ error "$dir1 shouldn't have LOV EA"
+
+ # delete the default layout on root directory
+ $LFS setstripe -d $MOUNT || error "delete root default layout failed"
+
+ local dir2=$MOUNT/$tdir-2
+ mkdir $dir2 || error "mkdir $dir2 failed"
+ ! getfattr -n trusted.lov $dir2 &> /dev/null ||
+ error "$dir2 shouldn't have LOV EA"
+
+ # set a new striping pattern on root directory
+ local def_stripe_size=$($LFS getstripe -S $MOUNT)
+ local new_def_stripe_size=$((def_stripe_size * 2))
+ $LFS setstripe -S $new_def_stripe_size $MOUNT ||
+ error "set stripe size on $MOUNT failed"
+
+ # new file created in $dir2 should inherit the new stripe size from
+ # the filesystem default
+ local file2=$dir2/$tfile-2
+ touch $file2 || error "touch $file2 failed"
+
+ local file2_stripe_size=$($LFS getstripe -S $file2)
+ [[ $file2_stripe_size -eq $new_def_stripe_size ]] ||
+ error "$file2 didn't inherit stripe size $new_def_stripe_size"
+
+ local dir3=$MOUNT/$tdir-3
+ mkdir $dir3 || error "mkdir $dir3 failed"
+ ! getfattr -n trusted.lov $dir3 &> /dev/null ||
+ error "$dir3 shouldn't have LOV EA"
+
+ # set OST pool on root directory
+ local pool=$TESTNAME
+ pool_add $pool || error "add $pool failed"
+ pool_add_targets $pool 0 $((OSTCOUNT - 1)) 1 ||
+ error "add targets to $pool failed"
+
+ $LFS setstripe -p $pool $MOUNT ||
+ error "set OST pool on $MOUNT failed"
+
+ # new file created in $dir3 should inherit the pool from
+ # the filesystem default
+ local file3=$dir3/$tfile-3
+ touch $file3 || error "touch $file3 failed"
+
+ local file3_pool=$($LFS getstripe -p $file3)
+ [[ "$file3_pool" = "$pool" ]] ||
+ error "$file3 didn't inherit OST pool $pool"
+
+ local dir4=$MOUNT/$tdir-4
+ mkdir $dir4 || error "mkdir $dir4 failed"
+ ! getfattr -n trusted.lov $dir4 &> /dev/null ||
+ error "$dir4 shouldn't have LOV EA"
+
+ # new file created in $dir4 should inherit the pool from
+ # the filesystem default
+ local file4=$dir4/$tfile-4
+ touch $file4 || error "touch $file4 failed"
+
+ local file4_pool=$($LFS getstripe -p $file4)
+ [[ "$file4_pool" = "$pool" ]] ||
+ error "$file4 didn't inherit OST pool $pool"
+
+ # new subdirectory under non-root directory should inherit
+ # the default layout from its parent directory
+ $LFS setstripe -S $new_def_stripe_size -p $pool $dir4 ||
+ error "set directory layout on $dir4 failed"
+
+ local dir5=$dir4/$tdir-5
+ mkdir $dir5 || error "mkdir $dir5 failed"
+
+ local dir4_layout=$(get_layout_param $dir4)
+ local dir5_layout=$(get_layout_param $dir5)
+ [[ "$dir4_layout" = "$dir5_layout" ]] ||
+ error "$dir5 should inherit the default layout from $dir4"
+}
+run_test 65n "don't inherit default layout from root for new subdirectories"
+
# bug 2543 - update blocks count on client
test_66() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_ost_nodsh && skip "remote OST with nodsh"
f="$DIR/$tfile"
- $SETSTRIPE -c 1 -i 0 $f
+ $LFS setstripe -c 1 -i 0 $f
$DIRECTIO write ${f}.2 0 1 || error "directio write error"
error "dd write error: $?"
fid=$($LFS path2fid $DIR/$tfile)
- if [ $(lustre_version_code ost1) -ge $(version_code 2.9.57) ]
+ if [ $OST1_VERSION -ge $(version_code 2.9.57) ]
then
check_ost=true
ost_file_prefix=$(do_facet ost1 $LCTL get_param -n debug_path)
local file=$DIR/$tfile
stack_trap "rm -f $file" EXIT
- $SETSTRIPE -c 1 -i 0 $file
+ $LFS setstripe -c 1 -i 0 $file
#define OBD_FAIL_OST_CHECKSUM_RECEIVE 0x21a
do_facet ost1 lctl set_param fail_loc=0x8000021a
set_checksums 1
[ "$SLOW" = "no" ] && NSEQ=1 && [ $F78SIZE -gt 32 ] && F78SIZE=32
echo "File size: $F78SIZE"
- $SETSTRIPE -c $OSTCOUNT $DIR/$tfile || error "setstripe failed"
+ $LFS setstripe -c $OSTCOUNT $DIR/$tfile || error "setstripe failed"
for i in $(seq 1 $NSEQ); do
FSIZE=$(($F78SIZE / ($NSEQ - $i + 1)))
echo directIO rdwr round $i of $NSEQ
local soc_old=$(do_facet ost1 lctl get_param -n $soc | head -n1)
local hosts=
if [ "$soc_old" != "never" ] &&
- [ "$(facet_fstype ost1)" != "ldiskfs" ]; then
+ [ "$ost1_FSTYPE" != "ldiskfs" ]; then
hosts=$(for host in $(seq -f "ost%g" 1 $OSTCOUNT); do
facet_active_host $host; done | sort -u)
do_nodes $hosts lctl set_param $soc=never
do_facet ost1 lctl set_param fail_loc=0x80000228
# write should trigger a retry and success
- $SETSTRIPE -i 0 -c 1 $DIR/$tfile
+ $LFS setstripe -i 0 -c 1 $DIR/$tfile
$MULTIOP $DIR/$tfile oO_CREAT:O_RDWR:O_SYNC:w4096c
RC=$?
if [ $RC -ne 0 ] ; then
do_facet ost1 lctl set_param fail_loc=0x228
# write should retry several times and return -ENOSPC finally
- $SETSTRIPE -i 0 -c 1 $DIR/$tfile
+ $LFS setstripe -i 0 -c 1 $DIR/$tfile
$MULTIOP $DIR/$tfile oO_CREAT:O_RDWR:O_SYNC:w4096c
RC=$?
ENOSPC=28
}
run_test 82 "Basic grouplock test"
-test_83() {
- local sfile="/boot/System.map-$(uname -r)"
- [ ! -f $sfile ] && skip "No $sfile found"
- # define OBD_FAIL_LLITE_PTASK_IO_FAIL 0x140d
- $LCTL set_param fail_loc=0x140d
- cp $sfile $DIR/$tfile || error "write failed"
- diff -c $sfile $DIR/$tfile || error "files are different"
- $LCTL set_param fail_loc=0
- rm -f $DIR/$tfile
-}
-run_test 83 "Short write in ptask ==============================="
-
test_99() {
[ -z "$(which cvs 2>/dev/null)" ] && skip_env "could not find cvs"
setup_test101bc() {
test_mkdir $DIR/$tdir
- local STRIPE_SIZE=$1
+ local ssize=$1
local FILE_LENGTH=$2
STRIPE_OFFSET=0
- local FILE_SIZE_MB=$((FILE_LENGTH / STRIPE_SIZE))
+ local FILE_SIZE_MB=$((FILE_LENGTH / ssize))
local list=$(comma_list $(osts_nodes))
set_osd_param $list '' read_cache_enable 0
trap cleanup_test101bc EXIT
# prepare the read-ahead file
- $SETSTRIPE -S $STRIPE_SIZE -i $STRIPE_OFFSET -c $OSTCOUNT $DIR/$tfile
+ $LFS setstripe -S $ssize -i $STRIPE_OFFSET -c $OSTCOUNT $DIR/$tfile
- dd if=/dev/zero of=$DIR/$tfile bs=$STRIPE_SIZE \
+ dd if=/dev/zero of=$DIR/$tfile bs=$ssize \
count=$FILE_SIZE_MB 2> /dev/null
}
local STRIPE_SIZE=1048576
local FILE_LENGTH=$((STRIPE_SIZE*100))
local nreads=10000
+ local rsize=65536
local osc_rpc_stats
setup_test101bc $STRIPE_SIZE $FILE_LENGTH
cancel_lru_locks osc
$LCTL set_param osc.*.rpc_stats 0
- $READS -f $DIR/$tfile -s$FILE_LENGTH -b65536 -n$nreads -t 180
+ $READS -f $DIR/$tfile -s$FILE_LENGTH -b$rsize -n$nreads -t 180
for osc_rpc_stats in $($LCTL get_param -N osc.*.rpc_stats); do
local stats=$($LCTL get_param -n $osc_rpc_stats)
local lines=$(echo "$stats" | awk 'END {print NR;}')
for size in 1 2 4 8; do
local rpc=$(echo "$stats" |
awk '($1 == "'$size':") {print $2; exit; }')
- [ $rpc != 0 ] &&
- error "Small $((size*4))k read IO $rpc !"
+ [ $rpc != 0 ] && ((size * PAGE_SIZE < rsize)) &&
+ error "Small $((size*PAGE_SIZE)) read IO $rpc!"
done
echo "$osc_rpc_stats check passed!"
done
skip "Need free space ${sz_MB}M, have ${free_MB}M"
echo "Create test file $file size ${sz_MB}M, ${free_MB}M free"
- $SETSTRIPE -c -1 $file || error "setstripe failed"
+ $LFS setstripe -c -1 $file || error "setstripe failed"
dd if=/dev/zero of=$file bs=1M count=$sz_MB || error "dd failed"
echo Cancel LRU locks on lustre client to flush the client cache
test_101g_brw_size_test() {
local mb=$1
- local pages=$((mb * 1048576 / $(page_size)))
+ local pages=$((mb * 1048576 / PAGE_SIZE))
local file=$DIR/$tfile
$LCTL set_param osc.*.max_pages_per_rpc=${mb}M ||
local list=$(comma_list $(osts_nodes))
local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
local brw_size="obdfilter.*.brw_size"
- local ostver=$(lustre_version_code ost1)
- local cliver=$(lustre_version_code client)
$LFS setstripe -i 0 -c 1 $DIR/$tfile
local orig_mb=$(do_facet ost1 $LCTL get_param -n $brw_size | head -n 1)
- if [ $ostver -ge $(version_code 2.8.52) -o \
- \( $ostver -ge $(version_code 2.7.17) -a \
- $ostver -lt $(version_code 2.7.50) \) ] &&
- [ $cliver -ge $(version_code 2.8.52) -o \
- \( $cliver -ge $(version_code 2.7.17) -a \
- $cliver -lt $(version_code 2.7.50) \) ]; then
- [ $ostver -ge $(version_code 2.9.52) ] && suffix="M"
+ if [ $OST1_VERSION -ge $(version_code 2.8.52) -o \
+ \( $OST1_VERSION -ge $(version_code 2.7.17) -a \
+ $OST1_VERSION -lt $(version_code 2.7.50) \) ] &&
+ [ $CLIENT_VERSION -ge $(version_code 2.8.52) -o \
+ \( $CLIENT_VERSION -ge $(version_code 2.7.17) -a \
+ $CLIENT_VERSION -lt $(version_code 2.7.50) \) ]; then
+ [ $OST1_VERSION -ge $(version_code 2.9.52) ] && suffix="M"
if [[ $orig_mb -lt 16 ]]; then
save_lustre_params $osts "$brw_size" > $p
do_nodes $list $LCTL set_param -n $brw_size=16$suffix ||
trap cleanup_test102 EXIT
cd $DIR
- $1 $SETSTRIPE -S $STRIPE_SIZE -i $STRIPE_OFFSET -c $STRIPE_COUNT $tdir
+ $1 $LFS setstripe -S $STRIPE_SIZE -i $STRIPE_OFFSET -c $STRIPE_COUNT $tdir
cd $DIR/$tdir
for num in 1 2 3 4; do
for count in $(seq 1 $STRIPE_COUNT); do
for idx in $(seq 0 $[$STRIPE_COUNT - 1]); do
local size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$idx-$count"
- $1 $SETSTRIPE -S $size -i $idx -c $count $file
+ $1 $LFS setstripe -S $size -i $idx -c $count $file
done
done
done
# b10930: get/set/list trusted.lov xattr
echo "get/set/list trusted.lov xattr ..."
local testfile=$DIR/$tfile
- $SETSTRIPE -S 65536 -i 1 -c $OSTCOUNT $testfile ||
+ $LFS setstripe -S 65536 -i 1 -c $OSTCOUNT $testfile ||
error "setstripe failed"
- local STRIPECOUNT=$($GETSTRIPE -c $testfile) ||
+ local STRIPECOUNT=$($LFS getstripe -c $testfile) ||
error "getstripe failed"
getfattr -d -m "^trusted" $testfile 2>/dev/null | grep "trusted.lov" ||
error "can't get trusted.lov from $testfile"
$MCREATE $testfile2
setfattr -n trusted.lov -v $value $testfile2
- local stripe_size=$($GETSTRIPE -S $testfile2)
- local stripe_count=$($GETSTRIPE -c $testfile2)
+ local stripe_size=$($LFS getstripe -S $testfile2)
+ local stripe_count=$($LFS getstripe -c $testfile2)
[[ $stripe_size -eq 65536 ]] ||
error "stripe size $stripe_size != 65536"
[[ $stripe_count -eq $STRIPECOUNT ]] ||
test_mkdir $DIR/$tdir
chown $RUNAS_ID $DIR/$tdir
local testfile=$DIR/$tdir/$tfile
- $RUNAS $SETSTRIPE -S 65536 -i 1 -c $OSTCOUNT $testfile ||
+ $RUNAS $LFS setstripe -S 65536 -i 1 -c $OSTCOUNT $testfile ||
error "setstripe failed"
- local STRIPECOUNT=$($RUNAS $GETSTRIPE -c $testfile) ||
+ local STRIPECOUNT=$($RUNAS $LFS getstripe -c $testfile) ||
error "getstripe failed"
$RUNAS getfattr -d -m "^lustre" $testfile 2> /dev/null | \
grep "lustre.lov" || error "can't get lustre.lov from $testfile"
$RUNAS $MCREATE $testfile2
$RUNAS setfattr -n lustre.lov -v $value $testfile2
- local stripe_size=$($RUNAS $GETSTRIPE -S $testfile2)
- local stripe_count=$($RUNAS $GETSTRIPE -c $testfile2)
+ local stripe_size=$($RUNAS $LFS getstripe -S $testfile2)
+ local stripe_count=$($RUNAS $LFS getstripe -c $testfile2)
[ $stripe_size -eq 65536 ] || error "stripe size $stripe_size != 65536"
[ $stripe_count -eq $STRIPECOUNT ] ||
error "stripe count $stripe_count != $STRIPECOUNT"
local default_size=$($LFS getstripe -S $test_kdir)
local default_count=$($LFS getstripe -c $test_kdir)
local default_offset=$($LFS getstripe -i $test_kdir)
- $SETSTRIPE -S 65536 -i 0 -c $OSTCOUNT $test_kdir ||
+ $LFS setstripe -S 65536 -i 0 -c $OSTCOUNT $test_kdir ||
error 'dir setstripe failed'
setfattr -n trusted.lov $test_kdir
local stripe_size=$($LFS getstripe -S $test_kdir)
test_102n() { # LU-4101 mdt: protect internal xattrs
[ -z "$(which setfattr 2>/dev/null)" ] &&
skip "could not find setfattr"
- if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.50) ]
+ if [ $MDS1_VERSION -lt $(version_code 2.5.50) ]
then
skip "MDT < 2.5.50 allows setxattr on internal trusted xattrs"
fi
# Get 'before' xattrs of $file1.
getfattr --absolute-names --dump --match=- $file1 > $xattr0
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.53) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.8.53) ] &&
namelist+=" lfsck_namespace"
for name in $namelist; do
# Try to copy xattr from $file0 to $file1.
setfattr --remove=$trusted.$name $file1 2> /dev/null
done
- if [ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.6.50) ]
+ if [ $MDS1_VERSION -gt $(version_code 2.6.50) ]
then
name="lfsck_ns"
# Try to copy xattr from $file0 to $file1.
run_test 102n "silently ignore setxattr on internal trusted xattrs"
test_102p() { # LU-4703 setxattr did not check ownership
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.56) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.5.56) ] &&
skip "MDS needs to be at least 2.5.56"
local testfile=$DIR/$tfile
run_test 102p "check setxattr(2) correctly fails without permission"
test_102q() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6.92) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.6.92) ] &&
skip "MDS needs to be at least 2.6.92"
orphan_linkea_check $DIR/$tfile || error "orphan_linkea_check"
run_test 102q "flistxattr should not return trusted.link EAs for orphans"
test_102r() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6.93) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.6.93) ] &&
skip "MDS needs to be at least 2.6.93"
touch $DIR/$tfile || error "touch"
run_test 102r "set EAs with empty values"
test_102s() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "MDS needs to be at least 2.11.52"
local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
run_test 102s "getting nonexistent xattrs should fail"
test_102t() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "MDS needs to be at least 2.11.52"
local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
echo "performing permissions..."
run_acl_subtest permissions || error "permissions failed"
# LU-1482 mdd: Setting xattr are properly checked with and without ACLs
- if [ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.8.55) -o \
- \( $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6) -a \
- $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.29) \) ]
+ if [ $MDS1_VERSION -gt $(version_code 2.8.55) -o \
+ \( $MDS1_VERSION -lt $(version_code 2.6) -a \
+ $MDS1_VERSION -ge $(version_code 2.5.29) \) ]
then
echo "performing permissions xattr..."
run_acl_subtest permissions_xattr ||
fi
echo "LU-2561 newly created file is same size as directory..."
- if [ $(facet_fstype $SINGLEMDS) != "zfs" ]; then
+ if [ "$mds1_FSTYPE" != "zfs" ]; then
run_acl_subtest 2561 || error "LU-2561 test failed"
else
run_acl_subtest 2561_zfs || error "LU-2561 zfs test failed"
[ $RUNAS_ID -eq $UID ] &&
skip_env "RUNAS_ID = UID = $UID -- skipping"
- chmod 666 /dev/obd
denied_cnt=$(($($RUNAS $LFS check servers 2>&1 |
grep "Permission denied" | wc -l)))
if [ $denied_cnt -ne 0 ]; then
DIFF=$((threshold - DIFF2 + 2))
DIFF2=$((MINV * DIFF / 100))
echo "Fill $DIFF% remaining space in OST$MINI with ${DIFF2}KB"
- $SETSTRIPE -i $MINI -c 1 $DIR/$tdir/OST${MINI} ||
+ $LFS setstripe -i $MINI -c 1 $DIR/$tdir/OST${MINI} ||
error "setstripe failed"
DIFF=$((DIFF2 / 2048))
i=0
MAXV1=$MAXV
# now fill using QOS
- $SETSTRIPE -c 1 $DIR/$tdir
+ $LFS setstripe -c 1 $DIR/$tdir
FILL=$((FILL / 200))
if [ $FILL -gt 600 ]; then
FILL=600
UUID=$(lctl get_param -n lov.${FSNAME}-clilov-*.target_obd |
awk '/'$MINI1': / {print $2; exit}')
echo $UUID
- MINC=$($GETSTRIPE --ost $UUID $DIR/$tdir | grep $DIR | wc -l)
+ MINC=$($LFS getstripe --ost $UUID $DIR/$tdir | grep $DIR | wc -l)
echo "$MINC files created on smaller OST $MINI1"
UUID=$(lctl get_param -n lov.${FSNAME}-clilov-*.target_obd |
awk '/'$MAXI1': / {print $2; exit}')
echo $UUID
- MAXC=$($GETSTRIPE --ost $UUID $DIR/$tdir | grep $DIR | wc -l)
+ MAXC=$($LFS getstripe --ost $UUID $DIR/$tdir | grep $DIR | wc -l)
echo "$MAXC files created on larger OST $MAXI1"
if [[ $MINC -gt 0 ]]; then
FILL=$((MAXC * 100 / MINC - 100))
FILE=$DIR/reset_async
# Ensure all OSCs are cleared
- $SETSTRIPE -c -1 $FILE
+ $LFS setstripe -c -1 $FILE
dd if=/dev/zero of=$FILE bs=64k count=$OSTCOUNT
sync
rm $FILE
{
[[ $OSTCOUNT -lt 2 ]] && skip_env "needs >= 2 OSTs"
- $SETSTRIPE -c 2 $DIR/$tfile || error "setstripe failed"
+ $LFS setstripe -c 2 $DIR/$tfile || error "setstripe failed"
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1 || error "dd failed"
sync
$MULTIOP $DIR/$tfile oO_RDONLY:O_DIRECT:r$((2048 * 1024)) ||
MAX_RPCS_IN_FLIGHT=`$LCTL get_param -n osc.*OST0000-osc-[^mM]*.max_rpcs_in_flight`
$LCTL set_param -n osc.*OST0000-osc-[^mM]*.max_rpcs_in_flight 1
BSIZE=1048576
- $SETSTRIPE $DIR/$tfile -i 0 -c 1 || error "setstripe failed"
+ $LFS setstripe $DIR/$tfile -i 0 -c 1 || error "setstripe failed"
$DIRECTIO write $DIR/$tfile 0 1 $BSIZE || error "first directio failed"
#define OBD_FAIL_OSC_DIO_PAUSE 0x40d
lctl set_param fail_loc=0x40d
test_127a() { # bug 15521
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- $SETSTRIPE -i 0 -c 1 $DIR/$tfile || error "setstripe failed"
+ $LFS setstripe -i 0 -c 1 $DIR/$tfile || error "setstripe failed"
$LCTL set_param osc.*.stats=0
FSIZE=$((2048 * 1024))
dd if=/dev/zero of=$DIR/$tfile bs=$FSIZE count=1
test_127b() { # bug LU-333
[ $PARALLEL == "yes" ] && skip "skip parallel run"
+ local name count samp unit min max sum sumsq
$LCTL set_param llite.*.stats=0
- FSIZE=65536 # sized fixed to match PAGE_SIZE for most clients
# perform 2 reads and writes so MAX is different from SUM.
- dd if=/dev/zero of=$DIR/$tfile bs=$FSIZE count=1
- dd if=/dev/zero of=$DIR/$tfile bs=$FSIZE count=1
+ dd if=/dev/zero of=$DIR/$tfile bs=$PAGE_SIZE count=1
+ dd if=/dev/zero of=$DIR/$tfile bs=$PAGE_SIZE count=1
cancel_lru_locks osc
- dd if=$DIR/$tfile of=/dev/null bs=$FSIZE count=1
- dd if=$DIR/$tfile of=/dev/null bs=$FSIZE count=1
-
- $LCTL get_param llite.*.stats | grep samples > $TMP/${tfile}.tmp
- while read NAME COUNT SAMP UNIT MIN MAX SUM SUMSQ; do
- echo "got $COUNT $NAME"
- eval $NAME=$COUNT || error "Wrong proc format"
-
- case $NAME in
- read_bytes)
- [ $COUNT -ne 2 ] && error "count is not 2: $COUNT"
- [ $MIN -ne $FSIZE ] && error "min is not $FSIZE: $MIN"
- [ $MAX -ne $FSIZE ] && error "max is incorrect: $MAX"
- [ $SUM -ne $((FSIZE * 2)) ] && error "sum is wrong: $SUM"
- ;;
- write_bytes)
- [ $COUNT -ne 2 ] && error "count is not 2: $COUNT"
- [ $MIN -ne $FSIZE ] && error "min is not $FSIZE: $MIN"
- [ $MAX -ne $FSIZE ] && error "max is incorrect: $MAX"
- [ $SUM -ne $((FSIZE * 2)) ] && error "sum is wrong: $SUM"
- ;;
- *) ;;
- esac
- done < $TMP/${tfile}.tmp
+ dd if=$DIR/$tfile of=/dev/null bs=$PAGE_SIZE count=1
+ dd if=$DIR/$tfile of=/dev/null bs=$PAGE_SIZE count=1
+
+ $LCTL get_param llite.*.stats | grep samples > $TMP/$tfile.tmp
+ while read name count samp unit min max sum sumsq; do
+ echo "got $count $name"
+ eval $name=$count || error "Wrong proc format"
+
+ case $name in
+ read_bytes)
+ [ $count -ne 2 ] && error "count is not 2: $count"
+ [ $min -ne $PAGE_SIZE ] &&
+ error "min is not $PAGE_SIZE: $min"
+ [ $max -ne $PAGE_SIZE ] &&
+ error "max is incorrect: $max"
+ [ $sum -ne $((PAGE_SIZE * 2)) ] &&
+ error "sum is wrong: $sum"
+ ;;
+ write_bytes)
+ [ $count -ne 2 ] && error "count is not 2: $count"
+ [ $min -ne $PAGE_SIZE ] &&
+ error "min is not $PAGE_SIZE: $min"
+ [ $max -ne $PAGE_SIZE ] &&
+ error "max is incorrect: $max"
+ [ $sum -ne $((PAGE_SIZE * 2)) ] &&
+ error "sum is wrong: $sum"
+ ;;
+ *) ;;
+ esac
+ done < $TMP/$tfile.tmp
#check that we actually got some stats
[ "$read_bytes" ] || error "Missing read_bytes stats"
test_129() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.56) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.5.56) ]] ||
skip "Need MDS version with at least 2.5.56"
- if [ "$(facet_fstype $SINGLEMDS)" != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip_env "ldiskfs only test"
fi
remote_mds_nodsh && skip "remote MDS with nodsh"
trap cleanup_130 EXIT RETURN
local fm_file=$DIR/$tfile
- $SETSTRIPE -S 65536 -c 1 $fm_file || error "setstripe on $fm_file"
+ $LFS setstripe -S 65536 -c 1 $fm_file || error "setstripe on $fm_file"
dd if=/dev/zero of=$fm_file bs=65536 count=1 ||
error "dd failed for $fm_file"
# LU-1795: test filefrag/FIEMAP once, even if unsupported
filefrag -ves $fm_file
RC=$?
- [ "$(facet_fstype ost$(($($GETSTRIPE -i $fm_file) + 1)))" = "zfs" ] &&
+ [ "$(facet_fstype ost$(($($LFS getstripe -i $fm_file) + 1)))" = "zfs" ] &&
skip_env "ORI-366/LU-1941: FIEMAP unimplemented on ZFS"
[ $RC != 0 ] && error "filefrag $fm_file failed"
filefrag_op=$(filefrag -ve -k $fm_file |
sed -n '/ext:/,/found/{/ext:/d; /found/d; p}')
- lun=$($GETSTRIPE -i $fm_file)
+ lun=$($LFS getstripe -i $fm_file)
start_blk=`echo $filefrag_op | cut -d: -f2 | cut -d. -f1`
IFS=$'\n'
trap cleanup_130 EXIT RETURN
local fm_file=$DIR/$tfile
- $SETSTRIPE -S 65536 -c $OSTCOUNT $fm_file ||
+ $LFS setstripe -S 65536 -c $OSTCOUNT $fm_file ||
error "setstripe on $fm_file"
- [ "$(facet_fstype ost$(($($GETSTRIPE -i $fm_file) + 1)))" = "zfs" ] &&
+ [ "$(facet_fstype ost$(($($LFS getstripe -i $fm_file) + 1)))" = "zfs" ] &&
skip_env "ORI-366/LU-1941: FIEMAP unimplemented on ZFS"
dd if=/dev/zero of=$fm_file bs=1M count=$OSTCOUNT ||
trap cleanup_130 EXIT RETURN
local fm_file=$DIR/$tfile
- $SETSTRIPE -S 65536 -c 2 $fm_file || error "setstripe on $fm_file"
- [ "$(facet_fstype ost$(($($GETSTRIPE -i $fm_file) + 1)))" = "zfs" ] &&
+ $LFS setstripe -S 65536 -c 2 $fm_file || error "setstripe on $fm_file"
+ [ "$(facet_fstype ost$(($($LFS getstripe -i $fm_file) + 1)))" = "zfs" ] &&
skip_env "ORI-366/LU-1941: FIEMAP unimplemented on ZFS"
dd if=/dev/zero of=$fm_file seek=1 bs=1M count=1 ||
trap cleanup_130 EXIT RETURN
local fm_file=$DIR/$tfile
- $SETSTRIPE -S 65536 -c $OSTCOUNT $fm_file ||
+ $LFS setstripe -S 65536 -c $OSTCOUNT $fm_file ||
error "setstripe on $fm_file"
- [ "$(facet_fstype ost$(($($GETSTRIPE -i $fm_file) + 1)))" = "zfs" ] &&
+ [ "$(facet_fstype ost$(($($LFS getstripe -i $fm_file) + 1)))" = "zfs" ] &&
skip_env "ORI-366/LU-1941: FIEMAP unimplemented on ZFS"
- local actual_stripe_count=$($GETSTRIPE -c $fm_file)
+ local actual_stripe_count=$($LFS getstripe -c $fm_file)
dd if=/dev/zero of=$fm_file bs=1M count=$actual_stripe_count ||
error "dd failed on $fm_file"
trap cleanup_130 EXIT RETURN
local fm_file=$DIR/$tfile
- $SETSTRIPE -S 131072 -c 2 $fm_file || error "setstripe on $fm_file"
- [ "$(facet_fstype ost$(($($GETSTRIPE -i $fm_file) + 1)))" = "zfs" ] &&
+ $LFS setstripe -S 131072 -c 2 $fm_file || error "setstripe on $fm_file"
+ [ "$(facet_fstype ost$(($($LFS getstripe -i $fm_file) + 1)))" = "zfs" ] &&
skip_env "ORI-366/LU-1941: FIEMAP unimplemented on ZFS"
NUM_BLKS=512
;;
*) error "Wrong facet '$facet'" ;;
esac
- echo $res
[ "$res" ] || error "The counter for $op on $facet was not incremented"
# if the argument $3 is zero, it means any stat increment is ok.
if [[ $want -gt 0 ]]; then
touch ${testdir}/${tfile} || error "touch failed"
check_stats $SINGLEMDS "open" 1
check_stats $SINGLEMDS "close" 1
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.8.54) ] && {
+ [ $MDS1_VERSION -ge $(version_code 2.8.54) ] && {
mknod ${testdir}/${tfile}-pipe p || error "mknod failed"
check_stats $SINGLEMDS "mknod" 2
}
run_test 133a "Verifying MDT stats ========================================"
test_133b() {
+ local res
+
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_ost_nodsh && skip "remote OST with nodsh"
remote_mds_nodsh && skip "remote MDS with nodsh"
chmod 444 ${testdir}/${tfile} || error "chmod failed"
check_stats $SINGLEMDS "setattr" 1
do_facet $SINGLEMDS $LCTL set_param mdt.*.md_stats=clear
- if [ $(lustre_version_code $SINGLEMDS) -ne $(version_code 2.2.0) ]
+ if [ $MDS1_VERSION -ne $(version_code 2.2.0) ]
then # LU-1740
ls -l ${testdir}/${tfile} > /dev/null|| error "ls failed"
check_stats $SINGLEMDS "getattr" 1
# Sleep to avoid a cached response.
#define OBD_STATFS_CACHE_SECONDS 1
sleep 2
+ do_facet $SINGLEMDS $LCTL set_param mdt.*.md_stats=clear
+ do_facet ost1 $LCTL set_param obdfilter.*.exports.*.stats=clear
$LFS df || error "lfs failed"
check_stats $SINGLEMDS "statfs" 1
+ # check aggregated statfs (LU-10018)
+ [ $MDS1_VERSION -lt $(version_code 2.11.54) ] &&
+ return 0
+ [ $CLIENT_VERSION -lt $(version_code 2.11.54) ] &&
+ return 0
+ sleep 2
+ do_facet $SINGLEMDS $LCTL set_param mdt.*.md_stats=clear
+ do_facet ost1 $LCTL set_param obdfilter.*.exports.*.stats=clear
+ df $DIR
+ check_stats $SINGLEMDS "statfs" 1
+
+ # We want to check that the client didn't send OST_STATFS to
+ # ost1 but the MDT also uses OST_STATFS for precreate. So some
+ # extra care is needed here.
+ if remote_mds; then
+ local nid=$($LCTL list_nids | head -1 | sed "s/\./\\\./g")
+ local param="obdfilter.$FSNAME-OST0000.exports.'$nid'.stats"
+
+ res=$(do_facet ost1 $LCTL get_param $param | grep statfs)
+ [ "$res" ] && error "OST got STATFS"
+ fi
+
return 0
}
run_test 133b "Verifying extra MDT stats =================================="
test_mkdir -p $testdir
# verify obdfilter stats.
- $SETSTRIPE -c 1 -i 0 $testdir/$tfile
+ $LFS setstripe -c 1 -i 0 $testdir/$tfile
sync
cancel_lru_locks osc
wait_delete_completed
mkdir -p ${testdir} || error "mkdir failed"
- $SETSTRIPE -c 1 -i 0 ${testdir}/${tfile}
+ $LFS setstripe -c 1 -i 0 ${testdir}/${tfile}
for ctr in {write,read}_bytes; do
sync
find $proc_dirs -exec cat '{}' \; &> /dev/null
# Second verifying readability.
- $LCTL get_param -R '*' &> /dev/null || error "proc file read failed"
+ $LCTL get_param -R '*' &> /dev/null
# Verifing writability with badarea_io.
find $proc_dirs \
test_133h() {
remote_mds_nodsh && skip "remote MDS with nodsh"
remote_ost_nodsh && skip "remote OST with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.9.54) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.9.54) ]] &&
skip "Need MDS version at least 2.9.54"
local facet
test_134a() {
remote_mds_nodsh && skip "remote MDS with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.54) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.7.54) ]] &&
skip "Need MDS version at least 2.7.54"
mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
test_134b() {
remote_mds_nodsh && skip "remote MDS with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.54) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.7.54) ]] &&
skip "Need MDS version at least 2.7.54"
mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
test_mkdir $dir
#use setstripe to do a write to every ost
for i in $(seq 0 $((OSTCOUNT-1))); do
- $SETSTRIPE -c 1 -i $i $dir || error "$SETSTRIPE $file failed"
+ $LFS setstripe -c 1 -i $i $dir || error "$LFS setstripe $file failed"
dd if=/dev/urandom of=$file bs=4k count=4 2>&1 > /dev/null
idx=$(printf %04x $i)
BEFORE=$(get_osd_param $list *OST*$idx stats |
mrename $test_dir/$tdir $MOUNT/.lustre/fid &&
error "rename to $MOUNT/.lustre/fid should fail."
- if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.51) ]
+ if [ $MDS1_VERSION -ge $(version_code 2.3.51) ]
then # LU-3547
local old_obf_mode=$(stat --format="%a" $DIR/.lustre/fid)
local new_obf_mode=777
$OPENFILE -f O_LOV_DELAY_CREATE:O_CREAT $test_dir/$tfile-2
fid=$($LFS path2fid $test_dir/$tfile-2)
- if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.50) ]
+ if [ $MDS1_VERSION -ge $(version_code 2.6.50) ]
then # LU-5424
echo "cp /etc/passwd $MOUNT/.lustre/fid/$fid"
cp /etc/passwd $MOUNT/.lustre/fid/$fid ||
}
test_154A() {
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.4.1) ]] &&
skip "Need MDS version at least 2.4.1"
local tf=$DIR/$tfile
run_test 154A "lfs path2fid and fid2path basic checks"
test_154B() {
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.4.1) ]] &&
skip "Need MDS version at least 2.4.1"
mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
test_154a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ -n "$FILESET" ] && skip "SKIP due to FILESET set"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.2.51) ]] ||
skip "Need MDS version at least 2.2.51"
[ -z "$(which setfacl)" ] && skip_env "must have setfacl tool"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ -n "$FILESET" ] && skip "SKIP due to FILESET set"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.2.51) ]] ||
skip "Need MDS version at least 2.2.51"
local remote_dir=$DIR/$tdir/remote_dir
run_test 154b "Open-by-FID for remote directory"
test_154c() {
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.4.1) ]] &&
skip "Need MDS version at least 2.4.1"
touch $DIR/$tfile.1 $DIR/$tfile.2 $DIR/$tfile.3
test_154d() {
remote_mds_nodsh && skip "remote MDS with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.53) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.5.53) ]] &&
skip "Need MDS version at least 2.5.53"
if remote_mds; then
test_154e()
{
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6.50) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.6.50) ]] &&
skip "Need MDS version at least 2.6.50"
if ls -a $MOUNT | grep -q '^\.lustre$'; then
test_154g()
{
[ -n "$FILESET" ] && skip "SKIP due to FILESET set"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.92) && \
- $(lustre_version_code client) -gt $(version_code 2.6.99) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.6.92) &&
+ $CLIENT_VERSION -gt $(version_code 2.6.99) ]] ||
skip "Need MDS version at least 2.6.92"
mkdir -p $DIR/$tdir
[ $MAXV -le $large_file_size ] &&
skip_env "max available OST size needs > $large_file_size KB"
- $SETSTRIPE $file -c 1 -i $MAXI || error "$SETSTRIPE $file failed"
+ $LFS setstripe $file -c 1 -i $MAXI || error "$LFS setstripe $file failed"
dd if=/dev/urandom of=$temp bs=$large_file_size count=1k ||
error "dd of=$temp bs=$large_file_size count=1k failed"
test_156() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_ost_nodsh && skip "remote OST with nodsh"
- [ "$(facet_fstype ost1)" = "zfs" -a \
- $(lustre_version_code ost1 -lt $(version_code 2.6.93)) ] &&
+ [ $OST1_VERSION -lt $(version_code 2.6.93) ] &&
+ skip "stats not implemented on old servers"
+ [ "$ost1_FSTYPE" = "zfs" ] &&
skip "LU-1956/LU-2261: stats not implemented on OSD ZFS"
local CPAGES=3
test_160a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.0) ] ||
+ [ $MDS1_VERSION -ge $(version_code 2.2.0) ] ||
skip "Need MDS version at least 2.2.0"
changelog_register || error "changelog_register failed"
test_160b() { # LU-3587
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.0) ] ||
+ [ $MDS1_VERSION -ge $(version_code 2.2.0) ] ||
skip "Need MDS version at least 2.2.0"
changelog_register || error "changelog_register failed"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- local rc=0
- local server_version=$(lustre_version_code $SINGLEMDS)
-
- [[ $server_version -gt $(version_code 2.5.57) ]] ||
- [[ $server_version -gt $(version_code 2.5.1) &&
- $server_version -lt $(version_code 2.5.50) ]] ||
+ [[ $MDS1_VERSION -gt $(version_code 2.5.57) ]] ||
+ [[ $MDS1_VERSION -gt $(version_code 2.5.1) &&
+ $MDS1_VERSION -lt $(version_code 2.5.50) ]] ||
skip "Need MDS version at least 2.5.58 or 2.5.2+"
+ local rc=0
+
# Registration step
changelog_register || error "changelog_register failed"
remote_mds_nodsh && skip "remote MDS with nodsh"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.60) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.7.60) ]] ||
skip "Need MDS version at least 2.7.60"
# Registration step
test_160f() {
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.56) ]] ||
- { skip "Need MDS version at least 2.10.56"; return 0; }
+ [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]] ||
+ skip "Need MDS version at least 2.10.56"
local mdts=$(comma_list $(mdts_nodes))
test_160g() {
remote_mds_nodsh && skip "remote MDS with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.56) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]] ||
skip "Need MDS version at least 2.10.56"
local mdts=$(comma_list $(mdts_nodes))
local nbcl=$(changelog_dump | wc -l)
[[ $nbcl -eq 0 ]] && error "no changelogs found"
- for param in "changelog_max_idle_indexes=$((nbcl / 2))" \
+ # reduce the max_idle_indexes value to make sure we exceed it
+ max_ndx=$((nbcl / 2 - 1))
+
+ for param in "changelog_max_idle_indexes=$max_ndx" \
"changelog_gc=1" \
"changelog_min_gc_interval=2" \
"changelog_min_free_cat_entries=3"; do
test_160h() {
remote_mds_nodsh && skip "remote MDS with nodsh" && return
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.56) ]] ||
- { skip "Need MDS version at least 2.10.56"; return 0; }
+ [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]] ||
+ skip "Need MDS version at least 2.10.56"
local mdts=$(comma_list $(mdts_nodes))
test_161c() {
remote_mds_nodsh && skip "remote MDS with nodsh"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.1.5) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.1.5) ]] &&
skip "Need MDS version at least 2.1.5"
# define CLF_RENAME_LAST 0x0001
# LU-4239: Verify fid2path works with paths 100 or more directories deep
test_162c() {
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.51) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.7.51) ]] &&
skip "Need MDS version at least 2.7.51"
local lpath=$tdir.local
test_180c() { # LU-2598
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_ost_nodsh && skip "remote OST with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.0) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.4.0) ]] &&
skip "Need MDS version at least 2.4.0"
do_rpc_nodes $(facet_active_host ost1) load_module obdecho/obdecho &&
test_183() { # LU-2275
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.56) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.3.56) ]] &&
skip "Need MDS version at least 2.3.56"
mkdir -p $DIR/$tdir || error "creating dir $DIR/$tdir"
ref2=/etc/group
file1=$dir0/f1
file2=$dir0/f2
- $SETSTRIPE -c1 $file1
+ $LFS setstripe -c1 $file1
cp $ref1 $file1
- $SETSTRIPE -c2 $file2
+ $LFS setstripe -c2 $file2
cp $ref2 $file2
- gen1=$($GETSTRIPE -g $file1)
- gen2=$($GETSTRIPE -g $file2)
+ gen1=$($LFS getstripe -g $file1)
+ gen2=$($LFS getstripe -g $file2)
$LFS swap_layouts $file1 $file2 || error "swap of file layout failed"
- gen=$($GETSTRIPE -g $file1)
+ gen=$($LFS getstripe -g $file1)
[[ $gen1 != $gen ]] ||
"Layout generation on $file1 does not change"
- gen=$($GETSTRIPE -g $file2)
+ gen=$($LFS getstripe -g $file2)
[[ $gen2 != $gen ]] ||
"Layout generation on $file2 does not change"
dir1=$dir0/d1
dir2=$dir0/d2
mkdir $dir1 $dir2
- $SETSTRIPE -c1 $file1
- $SETSTRIPE -c2 $file2
- $SETSTRIPE -c1 $file3
+ $LFS setstripe -c1 $file1
+ $LFS setstripe -c2 $file2
+ $LFS setstripe -c1 $file3
chown $RUNAS_ID $file3
- gen1=$($GETSTRIPE -g $file1)
- gen2=$($GETSTRIPE -g $file2)
+ gen1=$($LFS getstripe -g $file1)
+ gen2=$($LFS getstripe -g $file2)
$LFS swap_layouts $dir1 $dir2 &&
error "swap of directories layouts should fail"
run_test 184d "allow stripeless layouts swap"
test_184e() {
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.94) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.6.94) ]] ||
skip "Need MDS version at least 2.6.94"
check_swap_layouts_support
[ -z "$(which getfattr 2>/dev/null)" ] &&
}
run_test 184e "Recreate layout after stripeless layout swaps"
+test_184f() {
+ # Create a file with name longer than sizeof(struct stat) ==
+ # 144 to see if we can get chars from the file name to appear
+ # in the returned striping. Note that 'f' == 0x66.
+ local file=$(for ((i = 0; i < 200; i++)); do echo -n f; done)
+
+ mkdir -p $DIR/$tdir
+ mcreate $DIR/$tdir/$file
+ if lfs find --stripe-count 0x6666 $DIR/$tdir | grep $file; then
+ error "IOC_MDC_GETFILEINFO returned garbage striping"
+ fi
+}
+run_test 184f "IOC_MDC_GETFILEINFO for files with long names but no striping"
+
test_185() { # LU-2441
# LU-3553 - no volatile file support in old servers
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.60) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.3.60) ]] ||
skip "Need MDS version at least 2.3.60"
mkdir -p $DIR/$tdir || error "creating dir $DIR/$tdir"
test_187a() {
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.0) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.3.0) ] &&
skip "Need MDS version at least 2.3.0"
local dir0=$DIR/$tdir/$testnum
test_187b() {
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.0) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.3.0) ] &&
skip "Need MDS version at least 2.3.0"
local dir0=$DIR/$tdir/$testnum
# usage: check_default_stripe_attr
check_default_stripe_attr() {
- ACTUAL=$($GETSTRIPE $* $DIR/$tdir)
+ ACTUAL=$($LFS getstripe $* $DIR/$tdir)
case $1 in
--stripe-count|-c)
[ -n "$2" ] && EXPECTED=0 || EXPECTED=$(default_attr count);;
test_204a() {
test_mkdir $DIR/$tdir
- $SETSTRIPE --stripe-count 0 --stripe-size 0 --stripe-index -1 $DIR/$tdir
+ $LFS setstripe --stripe-count 0 --stripe-size 0 --stripe-index -1 $DIR/$tdir
check_default_stripe_attr --stripe-count
check_default_stripe_attr --stripe-size
test_204b() {
test_mkdir $DIR/$tdir
- $SETSTRIPE --stripe-count 1 $DIR/$tdir
+ $LFS setstripe --stripe-count 1 $DIR/$tdir
check_default_stripe_attr --stripe-size
check_default_stripe_attr --stripe-index
test_204c() {
test_mkdir $DIR/$tdir
- $SETSTRIPE --stripe-size 65536 $DIR/$tdir
+ $LFS setstripe --stripe-size 65536 $DIR/$tdir
check_default_stripe_attr --stripe-count
check_default_stripe_attr --stripe-index
test_204d() {
test_mkdir $DIR/$tdir
- $SETSTRIPE --stripe-index 0 $DIR/$tdir
+ $LFS setstripe --stripe-index 0 $DIR/$tdir
check_default_stripe_attr --stripe-count
check_default_stripe_attr --stripe-size
test_204e() {
test_mkdir $DIR/$tdir
- $SETSTRIPE -d $DIR/$tdir
+ $LFS setstripe -d $DIR/$tdir
check_default_stripe_attr --stripe-count --raw
check_default_stripe_attr --stripe-size --raw
test_204f() {
test_mkdir $DIR/$tdir
- $SETSTRIPE --stripe-count 1 $DIR/$tdir
+ $LFS setstripe --stripe-count 1 $DIR/$tdir
check_default_stripe_attr --stripe-size --raw
check_default_stripe_attr --stripe-index --raw
test_204g() {
test_mkdir $DIR/$tdir
- $SETSTRIPE --stripe-size 65536 $DIR/$tdir
+ $LFS setstripe --stripe-size 65536 $DIR/$tdir
check_default_stripe_attr --stripe-count --raw
check_default_stripe_attr --stripe-index --raw
test_204h() {
test_mkdir $DIR/$tdir
- $SETSTRIPE --stripe-index 0 $DIR/$tdir
+ $LFS setstripe --stripe-index 0 $DIR/$tdir
check_default_stripe_attr --stripe-count --raw
check_default_stripe_attr --stripe-size --raw
jobstats_set() {
local new_jobenv=$1
- do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$new_jobenv
- wait_update $HOSTNAME "$LCTL get_param -n jobid_var" $new_jobenv
+ set_persistent_param_and_check client "jobid_var" \
+ "$FSNAME.sys.jobid_var" $new_jobenv
}
test_205() { # Job stats
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.1) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.7.1) ]] ||
skip "Need MDS version with at least 2.7.1"
remote_mgs_nodsh && skip "remote MGS with nodsh"
remote_mds_nodsh && skip "remote MDS with nodsh"
local old_jobenv=$($LCTL get_param -n jobid_var)
[ $old_jobenv != $JOBENV ] && jobstats_set $JOBENV
- stack_trap "do_facet mgs \
- $LCTL conf_param $FSNAME.sys.jobid_var=$old_jobenv" EXIT
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ stack_trap "do_facet mgs $PERM_CMD jobid_var=$old_jobenv" EXIT
+ else
+ stack_trap "do_facet mgs $PERM_CMD \
+ $FSNAME.sys.jobid_var=$old_jobenv" EXIT
+ fi
changelog_register
local old_interval=$(do_facet $SINGLEMDS lctl get_param -n \
verify_jobstats "$cmd" "$SINGLEMDS"
# create all files on OST0000 so verify_jobstats can find OST stats
# open & close
- cmd="$SETSTRIPE -i 0 -c 1 $DIR/$tfile"
+ cmd="$LFS setstripe -i 0 -c 1 $DIR/$tfile"
verify_jobstats "$cmd" "$SINGLEMDS"
# setattr
cmd="touch $DIR/$tfile"
grep -c "job_id.*mkdir") -gt 1 ] && error "old jobstats not expired"
# Ensure that jobid are present in changelog (if supported by MDS)
- if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.52) ];then
+ if [ $MDS1_VERSION -ge $(version_code 2.6.52) ];then
changelog_dump | tail -10
jobids=$(changelog_dump | tail -9 | grep -c "j=")
[ $jobids -eq 9 ] ||
# LU-1480, LU-1773 and LU-1657
test_206() {
mkdir -p $DIR/$tdir
- $SETSTRIPE -c -1 $DIR/$tdir
+ $LFS setstripe -c -1 $DIR/$tdir
#define OBD_FAIL_LOV_INIT 0x1403
$LCTL set_param fail_loc=0xa0001403
$LCTL set_param fail_val=1
# is done, this test suite should be revised. - Jinshan
remote_mds_nodsh && skip "remote MDS with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.52) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.4.52) ]] ||
skip "Need MDS version at least 2.4.52"
echo "==== test 1: verify get lease work"
create_pool $FSNAME.$TESTNAME || return 1
do_facet mgs $LCTL pool_add $FSNAME.$TESTNAME $OST || return 2
- $SETSTRIPE $DIR/$tdir -i $OSTIDX -c 1 -p $FSNAME.$TESTNAME
+ $LFS setstripe $DIR/$tdir -i $OSTIDX -c 1 -p $FSNAME.$TESTNAME
MDSOBJS=$((last_id - next_id))
echo "preallocated objects on MDS is $MDSOBJS" "($last_id - $next_id)"
osc.*.max_pages_per_rpc)
local at_max=$($LCTL get_param -n at_max)
local timeout=$($LCTL get_param -n timeout)
- local test_at="$LCTL get_param -n at_max"
+ local test_at="at_max"
local param_at="$FSNAME.sys.at_max"
- local test_timeout="$LCTL get_param -n timeout"
+ local test_timeout="timeout"
local param_timeout="$FSNAME.sys.timeout"
$LCTL set_param -n osc.*.max_pages_per_rpc=1024
- set_conf_param_and_check client "$test_at" "$param_at" 0 ||
- error "conf_param at_max=0 failed"
- set_conf_param_and_check client "$test_timeout" "$param_timeout" 5 ||
- error "conf_param timeout=5 failed"
+ set_persistent_param_and_check client "$test_at" "$param_at" 0
+ set_persistent_param_and_check client "$test_timeout" "$param_timeout" 5
- #define OBD_FAIL_PTLRPC_CLIENT_BULK_CB3 0x520
- do_facet ost1 $LCTL set_param fail_loc=0x520
+ #define OBD_FAIL_PTLRPC_CLIENT_BULK_CB3 0x520
+ do_facet ost1 "$LCTL set_param fail_loc=0x520"
$LFS setstripe -c 1 -i 0 $DIR/$tfile
dd if=/dev/zero of=$DIR/$tfile bs=8MB count=1
sync
- do_facet ost1 $LCTL set_param fail_loc=0
+ do_facet ost1 "$LCTL set_param fail_loc=0"
- set_conf_param_and_check client "$test_at" "$param_at" $at_max ||
- error "conf_param at_max=$at_max failed"
- set_conf_param_and_check client "$test_timeout" "$param_timeout" \
- $timeout || error "conf_param timeout=$timeout failed"
+ set_persistent_param_and_check client "$test_at" "$param_at" $at_max
+ set_persistent_param_and_check client "$test_timeout" "$param_timeout" \
+ $timeout
$LCTL set_param -n $pages_per_rpc
restore_lustre_params < $p
if [ -z ${MDSSURVEY} ]; then
skip_env "mds-survey not found"
fi
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ] ||
+ [ $MDS1_VERSION -ge $(version_code 2.2.51) ] ||
skip "Need MDS version at least 2.2.51"
local mds=$(facet_host $SINGLEMDS)
if [ -z ${MDSSURVEY} ]; then
skip_env "mds-survey not found"
fi
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ] ||
+ [ $MDS1_VERSION -ge $(version_code 2.2.51) ] ||
skip "Need MDS version at least 2.2.51"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
test_228a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip_env "ldiskfs only test"
+ [ "$mds1_FSTYPE" != "ldiskfs" ] && skip_env "ldiskfs only test"
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
local myDIR=$DIR/$tdir
test_228b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip_env "ldiskfs only test"
+ [ "$mds1_FSTYPE" != "ldiskfs" ] && skip_env "ldiskfs only test"
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
local myDIR=$DIR/$tdir
test_228c() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip_env "ldiskfs only test"
+ [ "$mds1_FSTYPE" != "ldiskfs" ] && skip_env "ldiskfs only test"
local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
local myDIR=$DIR/$tdir
test_229() { # LU-2482, LU-3448
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.53) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.4.53) ] &&
skip "No HSM $(lustre_build_version $SINGLEMDS) MDS < 2.4.53"
rm -f $DIR/$tfile
$MULTIOP $DIR/$tfile H2c ||
error "failed to create file with released layout"
- $GETSTRIPE -v $DIR/$tfile
+ $LFS getstripe -v $DIR/$tfile
- local pattern=$($GETSTRIPE -L $DIR/$tfile)
+ local pattern=$($LFS getstripe -L $DIR/$tfile)
[ X"$pattern" = X"released" ] || error "pattern error ($pattern)"
- local stripe_count=$($GETSTRIPE -c $DIR/$tfile) || error "getstripe"
+ local stripe_count=$($LFS getstripe -c $DIR/$tfile) ||
+ error "getstripe"
[ $stripe_count -eq 2 ] || error "stripe count not 2 ($stripe_count)"
stat $DIR/$tfile || error "failed to stat released file"
test_230a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
local MDTIDX=1
test_230b() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
local MDTIDX=1
local old_file_mode=$(stat -c%f $migrate_dir/$tfile)
mkdir -p $migrate_dir/dir_default_stripe2
- $SETSTRIPE -c 2 $migrate_dir/dir_default_stripe2
- $SETSTRIPE -c 2 $migrate_dir/${tfile}_stripe2
+ $LFS setstripe -c 2 $migrate_dir/dir_default_stripe2
+ $LFS setstripe -c 2 $migrate_dir/${tfile}_stripe2
mkdir -p $other_dir
ln $migrate_dir/$tfile $other_dir/luna
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
local MDTIDX=1
test_230d() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
# LU-11235
- [ "$(facet_fstype mds1)" == "zfs" ] && skip "skip ZFS backend"
+ [ "$mds1_FSTYPE" == "zfs" ] && skip "skip ZFS backend"
local migrate_dir=$DIR/$tdir/migrate_dir
local old_index
test_230e() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
local i
test_230f() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
local a_fid
test_230g() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
mkdir -p $DIR/$tdir/migrate_dir
test_230h() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
local mdt_index
test_230i() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
skip "Need MDS version at least 2.11.52"
mkdir -p $DIR/$tdir/migrate_dir
}
run_test 230i "lfs migrate -m tolerates trailing slashes"
+test_230j() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
+
+ $LFS mkdir -m 0 -c 1 $DIR/$tdir || error "mkdir $tdir failed"
+ $LFS setstripe -E 1M -L mdt $DIR/$tdir/$tfile ||
+ error "create $tfile failed"
+ cat /etc/passwd > $DIR/$tdir/$tfile
+
+ $LFS migrate -m 1 $DIR/$tdir
+
+ cmp /etc/passwd $DIR/$tdir/$tfile ||
+ error "DoM file mismatch after migration"
+}
+run_test 230j "DoM file data not changed after dir migration"
+
+test_230k() {
+ [ $MDSCOUNT -lt 4 ] && skip "needs >= 4 MDTs"
+ [ $MDS1_VERSION -lt $(version_code 2.11.56) ] &&
+ skip "Need MDS version at least 2.11.56"
+
+ local total=20
+ local files_on_starting_mdt=0
+
+ $LFS mkdir -i -1 -c 2 $DIR/$tdir || error "mkdir failed"
+ $LFS getdirstripe $DIR/$tdir
+ for i in $(seq $total); do
+ echo $((i*i - i)) > $DIR/$tdir/$tfile.$i || error "write failed"
+ [[ $($LFS getstripe -m $DIR/$tdir/$tfile.$i) -eq 0 ]] &&
+ files_on_starting_mdt=$((files_on_starting_mdt + 1))
+ done
+
+ echo "$files_on_starting_mdt files on MDT0"
+
+ $LFS migrate -m 1,3 $DIR/$tdir || error "migrate -m 1,3 failed"
+ $LFS getdirstripe $DIR/$tdir
+
+ files_on_starting_mdt=0
+ for i in $(seq $total); do
+ $(echo $((i*i - i)) | cmp $DIR/$tdir/$tfile.$i -) ||
+ error "file $tfile.$i mismatch after migration"
+ [[ $($LFS getstripe -m $DIR/$tdir/$tfile.$i) -eq 1 ]] &&
+ files_on_starting_mdt=$((files_on_starting_mdt + 1))
+ done
+
+ echo "$files_on_starting_mdt files on MDT1 after migration"
+ [[ $files_on_starting_mdt -eq $total ]] && error "all files on MDT1"
+
+ $LFS migrate -m 0 -c 2 $DIR/$tdir || error "migrate -m 0 -c 2 failed"
+ $LFS getdirstripe $DIR/$tdir
+
+ files_on_starting_mdt=0
+ for i in $(seq $total); do
+ $(echo $((i*i - i)) | cmp $DIR/$tdir/$tfile.$i -) ||
+ error "file $tfile.$i mismatch after 2nd migration"
+ [[ $($LFS getstripe -m $DIR/$tdir/$tfile.$i) -eq 0 ]] &&
+ files_on_starting_mdt=$((files_on_starting_mdt + 1))
+ done
+
+ echo "$files_on_starting_mdt files on MDT0 after 2nd migration"
+ [[ $files_on_starting_mdt -eq $total ]] && error "all files on MDT0"
+
+ true
+}
+run_test 230k "file data not changed after dir migration"
+
+test_230l() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ [ $MDS1_VERSION -lt $(version_code 2.11.56) ] &&
+ skip "Need MDS version at least 2.11.56"
+
+ $LFS mkdir -i 0 -c 1 $DIR/$tdir || error "mkdir failed"
+ createmany -o $DIR/$tdir/f___________________________________ 1000 ||
+ error "create files under remote dir failed $i"
+ $LFS migrate -m 1 $DIR/$tdir || error "migrate failed"
+}
+run_test 230l "readdir between MDTs won't crash"
+
test_231a()
{
# For simplicity this test assumes that max_pages_per_rpc
# is the same across all OSCs
local max_pages=$($LCTL get_param -n osc.*.max_pages_per_rpc | head -n1)
- local bulk_size=$((max_pages * 4096))
+ local bulk_size=$((max_pages * PAGE_SIZE))
local brw_size=$(do_facet ost1 $LCTL get_param -n obdfilter.*.brw_size |
head -n 1)
run_test 232a "failed lock should not block umount"
test_232b() {
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.58) ] ||
+ [ $MDS1_VERSION -ge $(version_code 2.10.58) ] ||
skip "Need MDS version at least 2.10.58"
mkdir -p $DIR/$tdir
run_test 232b "failed data version lock should not block umount"
test_233a() {
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.64) ] ||
+ [ $MDS1_VERSION -ge $(version_code 2.3.64) ] ||
skip "Need MDS version at least 2.3.64"
[ -n "$FILESET" ] && skip_env "SKIP due to FILESET set"
run_test 233a "checking that OBF of the FS root succeeds"
test_233b() {
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.90) ] ||
+ [ $MDS1_VERSION -ge $(version_code 2.5.90) ] ||
skip "Need MDS version at least 2.5.90"
[ -n "$FILESET" ] && skip_env "SKIP due to FILESET set"
run_test 234 "xattr cache should not crash on ENOMEM"
test_235() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.52) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.4.52) ] &&
skip "Need MDS version at least 2.4.52"
flock_deadlock $DIR/$tfile
local file2=$DIR/$tdir/f2
test_mkdir -c1 $DIR/$tdir
- $SETSTRIPE -c 1 $file1 || error "cannot setstripe on '$file1': rc = $?"
+ $LFS setstripe -c 1 $file1 || error "cannot setstripe on '$file1': rc = $?"
cp $ref1 $file1 || error "cp $ref1 $file1 failed: rc = $?"
- $SETSTRIPE -c 2 $file2 || error "cannot setstripe on '$file2': rc = $?"
+ $LFS setstripe -c 2 $file2 || error "cannot setstripe on '$file2': rc = $?"
cp $ref2 $file2 || error "cp $ref2 $file2 failed: rc = $?"
local fd=$(free_fd)
local cmd="exec $fd<>$file2"
}
run_test 236 "Layout swap on open unlinked file"
-# test to verify file handle related system calls
-# (name_to_handle_at/open_by_handle_at)
-# The new system calls are supported in glibc >= 2.14.
-
-test_237() {
- echo "Test file_handle syscalls" > $DIR/$tfile ||
- error "write failed"
- check_fhandle_syscalls $DIR/$tfile ||
- error "check_fhandle_syscalls failed"
-}
-run_test 237 "Verify name_to_handle_at/open_by_handle_at syscalls"
-
# LU-4659 linkea consistency
test_238() {
- local server_version=$(lustre_version_code $SINGLEMDS)
-
- [[ $server_version -gt $(version_code 2.5.57) ]] ||
- [[ $server_version -gt $(version_code 2.5.1) &&
- $server_version -lt $(version_code 2.5.50) ]] ||
+ [[ $MDS1_VERSION -gt $(version_code 2.5.57) ]] ||
+ [[ $MDS1_VERSION -gt $(version_code 2.5.1) &&
+ $MDS1_VERSION -lt $(version_code 2.5.50) ]] ||
skip "Need MDS version at least 2.5.58 or 2.5.2+"
touch $DIR/$tfile
run_test 238 "Verify linkea consistency"
test_239A() { # was test_239
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.60) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.5.60) ] &&
skip "Need MDS version at least 2.5.60"
local list=$(comma_list $(mdts_nodes))
mkdir -p $DIR/$tdir
createmany -o $DIR/$tdir/f- 5000
unlinkmany $DIR/$tdir/f- 5000
- [ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.10.53) ] &&
+ [ $MDS1_VERSION -gt $(version_code 2.10.53) ] &&
do_nodes $list "lctl set_param -n osp.*.force_sync=1"
changes=$(do_nodes $list "lctl get_param -n osp.*MDT*.sync_changes \
osp.*MDT*.sync_in_flight" | calc_sum)
run_test 240 "race between ldlm enqueue and the connection RPC (no ASSERT)"
test_241_bio() {
- for LOOP in $(seq $1); do
- dd if=$DIR/$tfile of=/dev/null bs=40960 count=1 2>/dev/null
+ local count=$1
+ local bsize=$2
+
+ for LOOP in $(seq $count); do
+ dd if=$DIR/$tfile of=/dev/null bs=$bsize count=1 2>/dev/null
cancel_lru_locks $OSC || true
done
}
test_241_dio() {
+ local count=$1
+ local bsize=$2
+
for LOOP in $(seq $1); do
- dd if=$DIR/$tfile of=/dev/null bs=40960 count=1 \
- iflag=direct 2>/dev/null
+ dd if=$DIR/$tfile of=/dev/null bs=$bsize count=1 iflag=direct \
+ 2>/dev/null
done
}
test_241a() { # was test_241
- dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
+ local bsize=$PAGE_SIZE
+
+ (( bsize < 40960 )) && bsize=40960
+ dd if=/dev/zero of=$DIR/$tfile count=1 bs=$bsize
ls -la $DIR/$tfile
cancel_lru_locks $OSC
- test_241_bio 1000 &
+ test_241_bio 1000 $bsize &
PID=$!
- test_241_dio 1000
+ test_241_dio 1000 $bsize
wait $PID
}
run_test 241a "bio vs dio"
test_241b() {
- dd if=/dev/zero of=$DIR/$tfile count=1 bs=40960
+ local bsize=$PAGE_SIZE
+
+ (( bsize < 40960 )) && bsize=40960
+ dd if=/dev/zero of=$DIR/$tfile count=1 bs=$bsize
ls -la $DIR/$tfile
- test_241_dio 1000 &
+ test_241_dio 1000 $bsize &
PID=$!
- test_241_dio 1000
+ test_241_dio 1000 $bsize
wait $PID
}
run_test 241b "dio vs dio"
test_246() { # LU-7371
remote_ost_nodsh && skip "remote OST with nodsh"
- [ $(lustre_version_code ost1) -lt $(version_code 2.7.62) ] &&
+ [ $OST1_VERSION -lt $(version_code 2.7.62) ] &&
skip "Need OST version >= 2.7.62"
do_facet ost1 $LCTL set_param fail_val=4095
run_test 248 "fast read verification"
test_249() { # LU-7890
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.53) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.8.53) ] &&
skip "Need at least version 2.8.54"
rm -f $DIR/$tfile
- $SETSTRIPE -c 1 $DIR/$tfile
+ $LFS setstripe -c 1 $DIR/$tfile
# Offset 2T == 4k * 512M
dd if=/dev/zero of=$DIR/$tfile bs=4k count=1 seek=512M ||
error "dd to 2T offset failed"
run_test 249 "Write above 2T file size"
test_250() {
- [ "$(facet_fstype ost$(($($GETSTRIPE -i $DIR/$tfile) + 1)))" = "zfs" ] \
+ [ "$(facet_fstype ost$(($($LFS getstripe -i $DIR/$tfile) + 1)))" = "zfs" ] \
&& skip "no 16TB file size limit on ZFS"
- $SETSTRIPE -c 1 $DIR/$tfile
+ $LFS setstripe -c 1 $DIR/$tfile
# ldiskfs extent file size limit is (16TB - 4KB - 1) bytes
local size=$((16 * 1024 * 1024 * 1024 * 1024 - 4096 - 1))
$TRUNCATE $DIR/$tfile $size || error "truncate $tfile to $size failed"
run_test 250 "Write above 16T limit"
test_251() {
- $SETSTRIPE -c -1 -S 1048576 $DIR/$tfile
+ $LFS setstripe -c -1 -S 1048576 $DIR/$tfile
#define OBD_FAIL_LLITE_LOST_LAYOUT 0x1407
#Skip once - writing the first stripe will succeed
test_252() {
remote_mds_nodsh && skip "remote MDS with nodsh"
remote_ost_nodsh && skip "remote OST with nodsh"
- if [ "$(facet_fstype ost1)" != "ldiskfs" -o \
- "$(facet_fstype mds1)" != "ldiskfs" ]; then
+ if [ "$ost1_FSTYPE" != "ldiskfs" -o "$mds1_FSTYPE" != "ldiskfs" ]; then
skip_env "ldiskfs only test"
fi
lov.$FSNAME-*.pools.$TESTNAME | sort -u |
grep $ost_name" "$ost_name""_UUID" $((TIMEOUT/2)) ||
error "Client can not see the pool"
- $SETSTRIPE $DIR/$tdir -i $ostidx -c 1 -p $FSNAME.$TESTNAME ||
+ $LFS setstripe $DIR/$tdir -i $ostidx -c 1 -p $FSNAME.$TESTNAME ||
error "Setstripe failed"
dd if=/dev/zero of=$DIR/$tdir/0 bs=1M count=10
# the test won't work on ZFS until it supports 'ladvise dontneed', but
# it is still good to run until then to exercise 'ladvise willread'
! $LFS ladvise -a dontneed $DIR/$tfile &&
- [ "$(facet_fstype ost1)" = "zfs" ] &&
+ [ "$ost1_FSTYPE" = "zfs" ] &&
echo "osd-zfs does not support dontneed or drop_caches" &&
return 0
}
test_255a() {
- [ $(lustre_version_code ost1) -lt $(version_code 2.8.54) ] &&
+ [ $OST1_VERSION -lt $(version_code 2.8.54) ] &&
skip "lustre < 2.8.54 does not support ladvise "
remote_ost_nodsh && skip "remote OST with nodsh"
}
test_255b() {
- [ $(lustre_version_code ost1) -lt $(version_code 2.8.54) ] &&
+ [ $OST1_VERSION -lt $(version_code 2.8.54) ] &&
skip "lustre < 2.8.54 does not support ladvise "
remote_ost_nodsh && skip "remote OST with nodsh"
skip "ladvise ioctl is not supported"
! $LFS ladvise -a dontneed $DIR/$tfile &&
- [ "$(facet_fstype ost1)" = "zfs" ] &&
+ [ "$ost1_FSTYPE" = "zfs" ] &&
skip "zfs-osd does not support 'ladvise dontneed'"
local size_mb=100
run_test 255b "check 'lfs ladvise -a dontneed'"
test_255c() {
- [ $(lustre_version_code ost1) -lt $(version_code 2.10.50) ] &&
+ [ $OST1_VERSION -lt $(version_code 2.10.50) ] &&
skip "lustre < 2.10.53 does not support lockahead"
local count
local rc
test_mkdir -p $DIR/$tdir
- $SETSTRIPE -i 0 $DIR/$tdir
+ $LFS setstripe -i 0 $DIR/$tdir
#test 10 returns only success/failure
i=10
test_256() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "ldiskfs only test"
+ [ "$mds1_FSTYPE" != "ldiskfs" ] && skip "ldiskfs only test"
changelog_users $SINGLEMDS | grep "^cl" &&
skip "active changelog user"
test_257() {
remote_mds_nodsh && skip "remote MDS with nodsh"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.8.55) ]] &&
skip "Need MDS version at least 2.8.55"
test_mkdir $DIR/$tdir
local before
local after
- [ "$(facet_fstype mds1)" != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
+ [ "$mds1_FSTYPE" != "ldiskfs" ] && skip "ldiskfs only test"
stack_trap "rm -f $file" EXIT
### Data-on-MDT sanity tests ###
test_270a() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
- skip "Need MDS version at least 2.10.55"
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
+ skip "Need MDS version at least 2.10.55 for DoM"
# create DoM file
local dom=$DIR/$tdir/dom_file
mkdir -p $DIR/$tdir
# basic checks for DoM component creation
- $LFS setstripe -E 1024K -E 1024K -L mdt $dom 2>/dev/null &&
+ $LFS setstripe -E 1024K -E 2048K -L mdt $dom 2>/dev/null &&
error "Can set MDT layout to non-first entry"
- $LFS setstripe -E 1024K -L mdt -E 1024K -L mdt $dom 2>/dev/null &&
+ $LFS setstripe -E 1024K -L mdt -E 2048K -L mdt $dom 2>/dev/null &&
error "Can define multiple entries as MDT layout"
- $LFS setstripe -E 1M -L mdt $dom ||
- error "Can't create DoM layout"
+ $LFS setstripe -E 1M -L mdt $dom || error "Can't create DoM layout"
[ $($LFS getstripe -L $dom) == "mdt" ] || error "bad pattern"
[ $($LFS getstripe -c $dom) == 0 ] || error "bad stripe count"
local space_check=1
# Skip free space checks with ZFS
- if [ "$(facet_fstype $facet)" == "zfs" ]; then
- space_check=0
- fi
+ [ "$(facet_fstype $facet)" == "zfs" ] && space_check=0
# write
sync
+ local size_tmp=$((65536 * 3))
local mdtfree1=$(do_facet $facet \
- lctl get_param -n osd*.*$mdtname.kbytesfree)
- dd if=/dev/urandom of=$tmp bs=1024 count=100
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+
+ dd if=/dev/urandom of=$tmp bs=1024 count=$((size_tmp / 1024))
# check also direct IO along write
- dd if=$tmp of=$dom bs=102400 count=1 oflag=direct
+ # IO size must be a multiple of PAGE_SIZE on all platforms (ARM=64KB)
+ dd if=$tmp of=$dom bs=65536 count=$((size_tmp / 65536)) oflag=direct
sync
cmp $tmp $dom || error "file data is different"
- [ $(stat -c%s $dom) == 102400 ] || error "bad size after write"
+ [ $(stat -c%s $dom) == $size_tmp ] ||
+ error "bad size after write: $(stat -c%s $dom) != $size_tmp"
if [ $space_check == 1 ]; then
local mdtfree2=$(do_facet $facet \
- lctl get_param -n osd*.*$mdtname.kbytesfree)
- [ $(($mdtfree1 - $mdtfree2)) -ge 102 ] ||
- error "MDT free space is wrong after write"
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+
+ # increase in usage from by $size_tmp
+ [ $(($mdtfree1 - $mdtfree2)) -ge $((size_tmp / 1024)) ] ||
+ error "MDT free space wrong after write: " \
+ "$mdtfree1 >= $mdtfree2 + $size_tmp/1024"
fi
# truncate
- $TRUNCATE $dom 10000
- [ $(stat -c%s $dom) == 10000 ] || error "bad size after truncate"
+ local size_dom=10000
+
+ $TRUNCATE $dom $size_dom
+ [ $(stat -c%s $dom) == $size_dom ] ||
+ error "bad size after truncate: $(stat -c%s $dom) != $size_dom"
if [ $space_check == 1 ]; then
mdtfree1=$(do_facet $facet \
lctl get_param -n osd*.*$mdtname.kbytesfree)
- [ $(($mdtfree1 - $mdtfree2)) -ge 92 ] ||
- error "MDT free space is wrong after truncate"
+ # decrease in usage from $size_tmp to new $size_dom
+ [ $(($mdtfree1 - $mdtfree2)) -ge \
+ $(((size_tmp - size_dom) / 1024)) ] ||
+ error "MDT free space is wrong after truncate: " \
+ "$mdtfree1 >= $mdtfree2 + ($size_tmp - $size_dom) / 1024"
fi
# append
cat $tmp >> $dom
sync
- [ $(stat -c%s $dom) == 112400 ] || error "bad size after append"
+ size_dom=$((size_dom + size_tmp))
+ [ $(stat -c%s $dom) == $size_dom ] ||
+ error "bad size after append: $(stat -c%s $dom) != $size_dom"
if [ $space_check == 1 ]; then
mdtfree2=$(do_facet $facet \
lctl get_param -n osd*.*$mdtname.kbytesfree)
- [ $(($mdtfree1 - $mdtfree2)) -ge 102 ] ||
- error "MDT free space is wrong after append"
+ # increase in usage by $size_tmp from previous
+ [ $(($mdtfree1 - $mdtfree2)) -ge $((size_tmp / 1024)) ] ||
+ error "MDT free space is wrong after append: " \
+ "$mdtfree1 >= $mdtfree2 + $size_tmp/1024"
fi
# delete
if [ $space_check == 1 ]; then
mdtfree1=$(do_facet $facet \
lctl get_param -n osd*.*$mdtname.kbytesfree)
- [ $(($mdtfree1 - $mdtfree2)) -ge 112 ] ||
- error "MDT free space is wrong after removal"
+ # decrease in usage by $size_dom from previous
+ [ $(($mdtfree1 - $mdtfree2)) -ge $((size_dom / 1024)) ] ||
+ error "MDT free space is wrong after removal: " \
+ "$mdtfree1 >= $mdtfree2 + $size_dom/1024"
fi
# combined striping
$LFS setstripe -E 1024K -L mdt -E EOF $dom ||
error "Can't create DoM + OST striping"
- dd if=/dev/urandom of=$tmp bs=1024 count=2000
+ size_tmp=2031616 # must be a multiple of PAGE_SIZE=65536 on ARM
+ dd if=/dev/urandom of=$tmp bs=1024 count=$((size_tmp / 1024))
# check also direct IO along write
- dd if=$tmp of=$dom bs=102400 count=20 oflag=direct
+ dd if=$tmp of=$dom bs=65536 count=$((size_tmp / 65536)) oflag=direct
sync
cmp $tmp $dom || error "file data is different"
- [ $(stat -c%s $dom) == 2048000 ] || error "bad size after write"
- rm $dom
- rm $tmp
+ [ $(stat -c%s $dom) == $size_tmp ] ||
+ error "bad size after write: $(stat -c%s $dom) != $size_tmp"
+ rm $dom $tmp
return 0
}
run_test 270a "DoM: basic functionality tests"
test_270b() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
local dom=$DIR/$tdir/dom_file
run_test 270b "DoM: maximum size overflow checks for DoM-only file"
test_270c() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
mkdir -p $DIR/$tdir
# check files inherit DoM EA
touch $DIR/$tdir/first
- [ $($GETSTRIPE -L $DIR/$tdir/first) == "mdt" ] ||
+ [ $($LFS getstripe -L $DIR/$tdir/first) == "mdt" ] ||
error "bad pattern"
[ $($LFS getstripe -c $DIR/$tdir/first) == 0 ] ||
error "bad stripe count"
run_test 270c "DoM: DoM EA inheritance tests"
test_270d() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
mkdir -p $DIR/$tdir
run_test 270d "DoM: change striping from DoM to RAID0"
test_270e() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
mkdir -p $DIR/$tdir/dom
run_test 270e "DoM: lfs find with DoM files test"
test_270f() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
local mdtname=${FSNAME}-MDT0000-mdtlov
run_test 270f "DoM: maximum DoM stripe size checks"
test_271a() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
local dom=$DIR/$tdir/dom
lctl set_param -n mdc.*.stats=clear
dd if=/dev/zero of=$dom bs=4096 count=1 || return 1
cat $dom > /dev/null
- local reads=$(lctl get_param -n mdc.*.stats |
- awk '/ost_read/ {print $2}')
- [ -z $reads ] || error "Unexpected $reads READ RPCs"
+ local reads=$(lctl get_param -n mdc.*.stats | grep -c ost_read)
+ [ $reads -eq 0 ] || error "Unexpected $reads READ RPCs"
ls $dom
rm -f $dom
}
run_test 271a "DoM: data is cached for read after write"
test_271b() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
local dom=$DIR/$tdir/dom
$CHECKSTAT -t file -s 4096 $dom || error "stat #1 fails"
# second stat to check size is cached on client
$CHECKSTAT -t file -s 4096 $dom || error "stat #2 fails"
- local gls=$(lctl get_param -n mdc.*.stats |
- awk '/ldlm_glimpse/ {print $2}')
- [ -z $gls ] || error "Unexpected $gls glimpse RPCs"
+ local gls=$(lctl get_param -n mdc.*.stats | grep -c ldlm_glimpse)
+ [ $gls -eq 0 ] || error "Unexpected $gls glimpse RPCs"
rm -f $dom
}
run_test 271b "DoM: no glimpse RPC for stat (DoM only file)"
test_271ba() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
local dom=$DIR/$tdir/dom
$CHECKSTAT -t file -s 2097152 $dom || error "stat"
# second stat to check size is cached on client
$CHECKSTAT -t file -s 2097152 $dom || error "stat"
- local gls=$(lctl get_param -n mdc.*.stats |
- awk '/ldlm_glimpse/ {print $2}')
- [ -z $gls ] || error "Unexpected $gls glimpse RPCs"
- local gls=$(lctl get_param -n osc.*.stats |
- awk '/ldlm_glimpse/ {print $2}')
- [ -z $gls ] || error "Unexpected $gls OSC glimpse RPCs"
+ local gls=$(lctl get_param -n mdc.*.stats | grep -c ldlm_glimpse)
+ [ $gls == 0 ] || error "Unexpected $gls glimpse RPCs"
+ local gls=$(lctl get_param -n osc.*.stats | grep -c ldlm_glimpse)
+ [ $gls == 0 ] || error "Unexpected $gls OSC glimpse RPCs"
rm -f $dom
}
run_test 271ba "DoM: no glimpse RPC for stat (combined file)"
+
+get_mdc_stats() {
+ local mdtidx=$1
+ local param=$2
+ local mdt=MDT$(printf %04x $mdtidx)
+
+ if [ -z $param ]; then
+ lctl get_param -n mdc.*$mdt*.stats
+ else
+ lctl get_param -n mdc.*$mdt*.stats | awk "/$param/"'{print $2}'
+ fi
+}
+
test_271c() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.55) ] &&
skip "Need MDS version at least 2.10.55"
local dom=$DIR/$tdir/dom
createmany -o $dom 1000
lctl set_param -n mdc.*.stats=clear
smalliomany -w $dom 1000 200
- lctl get_param -n mdc.*.stats
- local enq=$(lctl get_param -n mdc.*.stats |
- awk '/ldlm_ibits_enqueue/ {print $2}')
+ get_mdc_stats $mdtidx
+ local enq=$(get_mdc_stats $mdtidx ldlm_ibits_enqueue)
# Each file has 1 open, 1 IO enqueues, total 2000
# but now we have also +1 getxattr for security.capability, total 3000
[ $enq -ge 2000 ] || error "Too few enqueues $enq, expected > 2000"
createmany -o $dom 1000
lctl set_param -n mdc.*.stats=clear
smalliomany -w $dom 1000 200
- lctl get_param -n mdc.*.stats
- local enq_2=$(lctl get_param -n mdc.*.stats |
- awk '/ldlm_ibits_enqueue/ {print $2}')
+ local enq_2=$(get_mdc_stats $mdtidx ldlm_ibits_enqueue)
# Expect to see reduced amount of RPCs by 1000 due to single enqueue
# for OPEN and IO lock.
[ $((enq - enq_2)) -ge 1000 ] ||
}
test_271d() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.57) ] &&
- skip "Need MDS version at least 2.10.57" && return
+ [ $MDS1_VERSION -lt $(version_code 2.10.57) ] &&
+ skip "Need MDS version at least 2.10.57"
local dom=$DIR/$tdir/dom
local tmp=$TMP/$tfile
$LFS setstripe -E 1024K -L mdt $DIR/$tdir
- local mdtidx=$($GETSTRIPE -M $DIR/$tdir)
- local facet=mds$((mdtidx + 1))
+ local mdtidx=$($LFS getstripe -M $DIR/$tdir)
cancel_lru_locks mdc
dd if=/dev/urandom of=$tmp bs=1000 count=1
# append data to the same file it should update local page
echo "Append to the same page"
cat /etc/hosts >> $dom
- local num=$(lctl get_param -n mdc.*.stats |
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats |
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats |
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
[ $ra == $rw ] || error "$((ra - rw)) resend occured"
echo "Open and read file"
cat $dom > /dev/null
- local num=$(lctl get_param -n mdc.*.stats |
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats |
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats |
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
[ $ra == $rw ] || error "$((ra - rw)) resend occured"
run_test 271d "DoM: read on open (1K file in reply buffer)"
test_271e() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.57) ] &&
- skip "Need MDS version at least 2.10.57" && return
+ [ $MDS1_VERSION -lt $(version_code 2.10.57) ] &&
+ skip "Need MDS version at least 2.10.57"
local dom=$DIR/$tdir/dom
local tmp=$TMP/${tfile}.data
$LFS setstripe -E 1024K -L mdt $DIR/$tdir
- local mdtidx=$($GETSTRIPE -M $DIR/$tdir)
- local facet=mds$((mdtidx + 1))
+ local mdtidx=$($LFS getstripe -M $DIR/$tdir)
cancel_lru_locks mdc
dd if=/dev/urandom of=$tmp bs=30K count=1
echo "Append to the same page"
cat /etc/hosts >> $dom
- local num=$(lctl get_param -n mdc.*.stats | \
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats | \
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats | \
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
# Reply buffer can be adjusted for larger buffer by resend
echo "Open and read file"
cat $dom > /dev/null
- local num=$(lctl get_param -n mdc.*.stats | \
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats | \
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats | \
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
# Reply buffer can be adjusted for larger buffer by resend
run_test 271e "DoM: read on open (30K file with reply buffer adjusting)"
test_271f() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.57) ] &&
- skip "Need MDS version at least 2.10.57" && return
+ [ $MDS1_VERSION -lt $(version_code 2.10.57) ] &&
+ skip "Need MDS version at least 2.10.57"
local dom=$DIR/$tdir/dom
local tmp=$TMP/$tfile
$LFS setstripe -E 1024K -L mdt $DIR/$tdir
- local mdtidx=$($GETSTRIPE -M $DIR/$tdir)
- local facet=mds$((mdtidx + 1))
+ local mdtidx=$($LFS getstripe -M $DIR/$tdir)
cancel_lru_locks mdc
dd if=/dev/urandom of=$tmp bs=200000 count=1
echo "Append to the same page"
cat /etc/hosts >> $dom
- local num=$(lctl get_param -n mdc.*.stats | \
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats | \
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats | \
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ -z $num ] || error "$num READ RPC occured"
[ $ra == $rw ] || error "$((ra - rw)) resend occured"
echo "Open and read file"
cat $dom > /dev/null
- local num=$(lctl get_param -n mdc.*.stats | \
- awk '/ost_read/ {print $2}')
- local ra=$(lctl get_param -n mdc.*.stats | \
- awk '/req_active/ {print $2}')
- local rw=$(lctl get_param -n mdc.*.stats | \
- awk '/req_waittime/ {print $2}')
+ local num=$(get_mdc_stats $mdtidx ost_read)
+ local ra=$(get_mdc_stats $mdtidx req_active)
+ local rw=$(get_mdc_stats $mdtidx req_waittime)
[ $num -eq 1 ] || error "expect 1 READ RPC, $num occured"
[ $ra == $rw ] || error "$((ra - rw)) resend occured"
}
run_test 271f "DoM: read on open (200K file and read tail)"
+test_272a() {
+ [ $MDS1_VERSION -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS version at least 2.11.50"
+
+ local dom=$DIR/$tdir/dom
+ mkdir -p $DIR/$tdir
+
+ $LFS setstripe -E 256K -L mdt -E -1 -c1 $dom
+ dd if=/dev/urandom of=$dom bs=512K count=1 ||
+ error "failed to write data into $dom"
+ local old_md5=$(md5sum $dom)
+
+ $LFS migrate -E 256K -L mdt -E -1 -c2 $dom ||
+ error "failed to migrate to the same DoM component"
+
+ [ $($LFS getstripe -c $dom) -eq 2 ] ||
+ error "layout was not changed silently"
+
+ local new_md5=$(md5sum $dom)
+
+ [ "$old_md5" != "$new_md5" ] &&
+ error "md5sum differ: $old_md5, $new_md5"
+ return 0
+}
+run_test 272a "DoM migration: new layout with the same DOM component"
+
+test_272b() {
+ [ $MDS1_VERSION -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS version at least 2.11.50"
+
+ local dom=$DIR/$tdir/dom
+ mkdir -p $DIR/$tdir
+ $LFS setstripe -E 1M -L mdt -E -1 -c1 $dom
+
+ local mdtidx=$($LFS getstripe -m $dom)
+ local mdtname=MDT$(printf %04x $mdtidx)
+ local facet=mds$((mdtidx + 1))
+
+ local mdtfree1=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+ dd if=/dev/urandom of=$dom bs=2M count=1 ||
+ error "failed to write data into $dom"
+ local old_md5=$(md5sum $dom)
+ cancel_lru_locks mdc
+ local mdtfree1=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+
+ $LFS migrate -c2 $dom ||
+ error "failed to migrate to the new composite layout"
+ [ $($LFS getstripe -L $dom) == 'mdt' ] &&
+ error "MDT stripe was not removed"
+
+ cancel_lru_locks mdc
+ local new_md5=$(md5sum $dom)
+ [ "$old_md5" != "$new_md5" ] &&
+ error "$old_md5 != $new_md5"
+
+ # Skip free space checks with ZFS
+ if [ "$(facet_fstype $facet)" != "zfs" ]; then
+ local mdtfree2=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+ [ $mdtfree2 -gt $mdtfree1 ] ||
+ error "MDT space is not freed after migration"
+ fi
+ return 0
+}
+run_test 272b "DoM migration: DOM file to the OST-striped file (plain)"
+
+test_272c() {
+ [ $MDS1_VERSION -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS version at least 2.11.50"
+
+ local dom=$DIR/$tdir/$tfile
+ mkdir -p $DIR/$tdir
+ $LFS setstripe -E 1M -L mdt -E -1 -c1 $dom
+
+ local mdtidx=$($LFS getstripe -m $dom)
+ local mdtname=MDT$(printf %04x $mdtidx)
+ local facet=mds$((mdtidx + 1))
+
+ dd if=/dev/urandom of=$dom bs=2M count=1 oflag=direct ||
+ error "failed to write data into $dom"
+ local old_md5=$(md5sum $dom)
+ cancel_lru_locks mdc
+ local mdtfree1=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+
+ $LFS migrate -E 2M -c1 -E -1 -c2 $dom ||
+ error "failed to migrate to the new composite layout"
+ [ $($LFS getstripe -L $dom) == 'mdt' ] &&
+ error "MDT stripe was not removed"
+
+ cancel_lru_locks mdc
+ local new_md5=$(md5sum $dom)
+ [ "$old_md5" != "$new_md5" ] &&
+ error "$old_md5 != $new_md5"
+
+ # Skip free space checks with ZFS
+ if [ "$(facet_fstype $facet)" != "zfs" ]; then
+ local mdtfree2=$(do_facet $facet \
+ lctl get_param -n osd*.*$mdtname.kbytesfree)
+ [ $mdtfree2 -gt $mdtfree1 ] ||
+ error "MDS space is not freed after migration"
+ fi
+ return 0
+}
+run_test 272c "DoM migration: DOM file to the OST-striped file (composite)"
+
+test_273a() {
+ [ $MDS1_VERSION -lt $(version_code 2.11.50) ] &&
+ skip "Need MDS version at least 2.11.50"
+
+ # Layout swap cannot be done if either file has DOM component,
+ # this will never be supported, migration should be used instead
+
+ local dom=$DIR/$tdir/$tfile
+ mkdir -p $DIR/$tdir
+
+ $LFS setstripe -c2 ${dom}_plain
+ $LFS setstripe -E 1M -L mdt -E -1 -c2 ${dom}_dom
+ $LFS swap_layouts ${dom}_plain ${dom}_dom &&
+ error "can swap layout with DoM component"
+ $LFS swap_layouts ${dom}_dom ${dom}_plain &&
+ error "can swap layout with DoM component"
+
+ $LFS setstripe -E 1M -c1 -E -1 -c2 ${dom}_comp
+ $LFS swap_layouts ${dom}_comp ${dom}_dom &&
+ error "can swap layout with DoM component"
+ $LFS swap_layouts ${dom}_dom ${dom}_comp &&
+ error "can swap layout with DoM component"
+ return 0
+}
+run_test 273a "DoM: layout swapping should fail with DOM"
+
test_275() {
remote_ost_nodsh && skip "remote OST with nodsh"
- [ $(lustre_version_code ost1) -lt $(version_code 2.10.57) ] &&
+ [ $OST1_VERSION -lt $(version_code 2.10.57) ] &&
skip "Need OST version >= 2.10.57"
local file=$DIR/$tfile
}
test_300a() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.0) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.0) ] &&
skip "skipped for lustre < 2.7.0"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
run_test 300a "basic striped dir sanity test"
test_300b() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.0) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.0) ] &&
skip "skipped for lustre < 2.7.0"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
run_test 300b "check ctime/mtime for striped dir"
test_300c() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.0) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.0) ] &&
skip "skipped for lustre < 2.7.0"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
run_test 300c "chown && check ls under striped directory"
test_300d() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.0) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.0) ] &&
skip "skipped for lustre < 2.7.0"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
local file
mkdir -p $DIR/$tdir
- $SETSTRIPE -c 2 $DIR/$tdir
+ $LFS setstripe -c 2 $DIR/$tdir
#local striped directory
$LFS setdirstripe -i 0 -c 2 -H all_char $DIR/$tdir/striped_dir ||
run_test 300d "check default stripe under striped directory"
test_300e() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
test_300f() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
local stripe_count
test_300g() {
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
local dir
test_300h() {
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
local dir
test_300i() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
local stripe_count
test_300j() {
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
local stripe_count
test_300k() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
+ # this test needs a huge transaction
+ local kb
+ kb=$(do_facet $SINGLEMDS lctl get_param -n osd*.lustre-MDT0000.kbytestotal)
+ [ $kb -lt $((1024*1024)) ] && skip "too small mds: $kb"
+
local stripe_count
local file
test_300l() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
local stripe_index
test_300m() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -ge 2 ] && skip_env "Only for single MDT"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
mkdir -p $DIR/$tdir/striped_dir
test_300n() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
remote_mds_nodsh && skip "remote MDS with nodsh"
test_300o() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.7.55) ] &&
skip "Need MDS version at least 2.7.55"
local numfree1
}
run_test 300q "create remote directory under orphan directory"
+test_300r() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.7.55) ] &&
+ skip "Need MDS version at least 2.7.55" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+
+ mkdir $DIR/$tdir
+
+ $LFS setdirstripe -i 0 -c -1 $DIR/$tdir/striped_dir ||
+ error "set striped dir error"
+
+ $LFS getdirstripe $DIR/$tdir/striped_dir ||
+ error "getstripeddir fails"
+
+ local stripe_count
+ stripe_count=$($LFS getdirstripe $DIR/$tdir/striped_dir |
+ awk '/lmv_stripe_count:/ { print $2 }')
+
+ [ $MDSCOUNT -ne $stripe_count ] &&
+ error "wrong stripe count $stripe_count expected $MDSCOUNT"
+
+ rm -rf $DIR/$tdir/striped_dir ||
+ error "unlink striped dir fails"
+}
+run_test 300r "test -1 striped directory"
+
prepare_remote_file() {
mkdir $DIR/$tdir/src_dir ||
error "create remote source failed"
test_311() {
[ $PARALLEL == "yes" ] && skip "skip parallel run"
[ $OSTCOUNT -lt 2 ] && skip "needs >= 2 OSTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.54) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.8.54) ] &&
skip "lustre < 2.8.54 does not contain LU-4825 fix"
remote_mds_nodsh && skip "remote MDS with nodsh"
local old_iused=$($LFS df -i | grep OST0000 | awk '{ print $3 }')
+ local mdts=$(comma_list $(mdts_nodes))
mkdir -p $DIR/$tdir
- $SETSTRIPE -i 0 -c 1 $DIR/$tdir
+ $LFS setstripe -i 0 -c 1 $DIR/$tdir
createmany -o $DIR/$tdir/$tfile. 1000
# statfs data is not real time, let's just calculate it
old_iused=$((old_iused + 1000))
- local count=$(do_facet $SINGLEMDS "lctl get_param -n \
+ local count=$(do_facet $SINGLEMDS "$LCTL get_param -n \
osp.*OST0000*MDT0000.create_count")
- local max_count=$(do_facet $SINGLEMDS "lctl get_param -n \
+ local max_count=$(do_facet $SINGLEMDS "$LCTL get_param -n \
osp.*OST0000*MDT0000.max_create_count")
- for idx in $(seq $MDSCOUNT); do
- do_facet mds$idx "lctl set_param -n \
- osp.*OST0000*MDT000?.max_create_count=0"
- done
+ do_nodes $mdts "$LCTL set_param -n osp.*OST0000*.max_create_count=0"
- $SETSTRIPE -i 0 $DIR/$tdir/$tfile || error "setstripe failed"
- local index=$($GETSTRIPE -i $DIR/$tdir/$tfile)
+ $LFS setstripe -i 0 $DIR/$tdir/$tfile || error "setstripe failed"
+ local index=$($LFS getstripe -i $DIR/$tdir/$tfile)
[ $index -ne 0 ] || error "$tfile stripe index is 0"
unlinkmany $DIR/$tdir/$tfile. 1000
- for idx in $(seq $MDSCOUNT); do
- do_facet mds$idx "lctl set_param -n \
- osp.*OST0000*MDT000?.max_create_count=$max_count"
- do_facet mds$idx "lctl set_param -n \
- osp.*OST0000*MDT000?.create_count=$count"
- done
+ do_nodes $mdts "$LCTL set_param -n \
+ osp.*OST0000*.max_create_count=$max_count"
+ [ $(lustre_version_code $facet) -lt $(version_code 2.11.56) ] &&
+ do_nodes $mdts "$LCTL set_param -n \
+ osp.*OST0000*.create_count=$count"
+ do_nodes $mdts "$LCTL get_param osp.*OST0000*.create_count" |
+ grep "=0" && error "create_count is zero"
local new_iused
for i in $(seq 120); do
test_312() { # LU-4856
remote_ost_nodsh && skip "remote OST with nodsh"
- [ $(facet_fstype ost1) = "zfs" ] ||
+ [ "$ost1_FSTYPE" = "zfs" ] ||
skip_env "the test only applies to zfs"
local max_blksz=$(do_facet ost1 \
$ZFS get -p recordsize $(facet_device ost1) |
awk '!/VALUE/{print $3}')
- local min_blksz=$(getconf PAGE_SIZE)
# to make life a little bit easier
$LFS mkdir -c 1 -i 0 $DIR/$tdir
# Get ZFS object id
local zfs_objid=$(zfs_oid_to_objid ost1 $oid)
+ # block size change by sequential overwrite
+ local bs
- # block size change by sequential over write
- local blksz
- for ((bs=$min_blksz; bs <= max_blksz; bs <<= 2)); do
+ for ((bs=$PAGE_SIZE; bs <= max_blksz; bs *= 4)) ; do
dd if=/dev/zero of=$tf bs=$bs count=1 oflag=sync conv=notrunc
- blksz=$(zfs_object_blksz ost1 $zfs_objid)
+ local blksz=$(zfs_object_blksz ost1 $zfs_objid)
[ $blksz -eq $bs ] || error "blksz error: $blksz, expected: $bs"
done
rm -f $tf
# block size change by sequential append write
- dd if=/dev/zero of=$tf bs=$min_blksz count=1 oflag=sync conv=notrunc
+ dd if=/dev/zero of=$tf bs=$PAGE_SIZE count=1 oflag=sync conv=notrunc
oid=$($LFS getstripe $tf | awk '/obdidx/{getline; print $2}')
zfs_objid=$(zfs_oid_to_objid ost1 $oid)
+ local count
- for ((count = 1; count < $((max_blksz / min_blksz)); count *= 2)); do
- dd if=/dev/zero of=$tf bs=$min_blksz count=$count seek=$count \
+ for ((count = 1; count < $((max_blksz / PAGE_SIZE)); count *= 2)); do
+ dd if=/dev/zero of=$tf bs=$PAGE_SIZE count=$count seek=$count \
oflag=sync conv=notrunc
blksz=$(zfs_object_blksz ost1 $zfs_objid)
- [ $blksz -eq $((2 * count * min_blksz)) ] ||
- error "blksz error, actual $blksz, " \
- "expected: 2 * $count * $min_blksz"
+ [ $blksz -eq $((2 * count * PAGE_SIZE)) ] ||
+ error "blksz error, actual $blksz, " \
+ "expected: 2 * $count * $PAGE_SIZE"
done
rm -f $tf
dd if=/dev/zero of=$tf bs=1K count=1 oflag=sync conv=notrunc
blksz=$(zfs_object_blksz ost1 $zfs_objid)
- [ $blksz -eq $min_blksz ] ||
- error "blksz error: $blksz, expected: $min_blksz"
+ [ $blksz -eq $PAGE_SIZE ] ||
+ error "blksz error: $blksz, expected: $PAGE_SIZE"
dd if=/dev/zero of=$tf bs=64K count=1 oflag=sync conv=notrunc seek=128
blksz=$(zfs_object_blksz ost1 $zfs_objid)
remote_ost_nodsh && skip "remote OST with nodsh"
local file=$DIR/$tfile
+
rm -f $file
- $SETSTRIPE -c 1 -i 0 $file || error "setstripe failed"
+ $LFS setstripe -c 1 -i 0 $file || error "setstripe failed"
# define OBD_FAIL_TGT_RCVD_EIO 0x720
do_facet ost1 "$LCTL set_param fail_loc=0x720"
- dd if=/dev/zero of=$file bs=4096 oflag=direct count=1 &&
+ dd if=/dev/zero of=$file bs=$PAGE_SIZE oflag=direct count=1 &&
error "write should failed"
do_facet ost1 "$LCTL set_param fail_loc=0"
rm -f $file
test_314() {
[ $OSTCOUNT -lt 2 ] && skip "needs >= 2 OSTs"
- $SETSTRIPE -c 2 -i 0 $DIR/$tfile || error "setstripe failed"
+ $LFS setstripe -c 2 -i 0 $DIR/$tfile || error "setstripe failed"
do_facet ost1 "$LCTL set_param fail_loc=0x720"
rm -f $DIR/$tfile
wait_delete_completed
local file=$DIR/$tfile
rm -f $file
- $MULTIOP $file oO_CREAT:O_DIRECT:O_RDWR:w4096000c
- $MULTIOP $file oO_RDONLY:r4096000_c &
+ $MULTIOP $file oO_CREAT:O_DIRECT:O_RDWR:w4063232c ||
+ error "multiop file write failed"
+ $MULTIOP $file oO_RDONLY:r4063232_c &
PID=$!
sleep 2
local saved_debug=$($LCTL get_param -n debug)
$LCTL set_param debug=0
- $SETSTRIPE -c 1 -i 0 $DIR/$tfile
+ $LFS setstripe -c 1 -i 0 $DIR/$tfile
# get ost1 size - lustre-OST0000
local ost1_avail_size=$($LFS df | awk /${ost1_svc}/'{ print $4 }')
test_399b() { # LU-8726 for OST fake read
remote_ost_nodsh && skip "remote OST with nodsh"
- if [ "$(facet_fstype ost1)" != "ldiskfs" ]; then
+ if [ "$ost1_FSTYPE" != "ldiskfs" ]; then
skip_env "ldiskfs only test"
fi
run_test 401d "Verify 'lctl set_param' accepts values containing '='"
test_402() {
- local server_version=$(lustre_version_code $SINGLEMDS)
- [[ $server_version -ge $(version_code 2.7.66) ]] ||
- [[ $server_version -ge $(version_code 2.7.18.4) &&
- $server_version -lt $(version_code 2.7.50) ]] ||
- [[ $server_version -ge $(version_code 2.7.2) &&
- $server_version -lt $(version_code 2.7.11) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.7.66) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.7.18.4) &&
+ $MDS1_VERSION -lt $(version_code 2.7.50) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.7.2) &&
+ $MDS1_VERSION -lt $(version_code 2.7.11) ]] ||
skip "Need MDS version 2.7.2+ or 2.7.18.4+ or 2.7.66+"
remote_mds_nodsh && skip "remote MDS with nodsh"
run_test 403 "i_nlink should not drop to zero due to aliasing"
test_404() { # LU-6601
- local server_version=$(lustre_version_code $SINGLEMDS)
- [[ $server_version -ge $(version_code 2.8.53) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.8.53) ]] ||
skip "Need server version newer than 2.8.52"
remote_mds_nodsh && skip "remote MDS with nodsh"
run_test 404 "validate manual {de}activated works properly for OSPs"
test_405() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.6.92) -o \
- [ $(lustre_version_code client) -lt $(version_code 2.6.99) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.6.92) -o \
+ [ $CLIENT_VERSION -lt $(version_code 2.6.99) ] &&
skip "Layout swap lock is not supported"
check_swap_layouts_support
[ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs"
[ -n "$FILESET" ] && skip "SKIP due to FILESET set"
[ $PARALLEL == "yes" ] && skip "skip parallel run"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.50) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.8.50) ] &&
skip "Need MDS version at least 2.8.50"
local def_stripe_size=$($LFS getstripe -S $MOUNT)
test_407() {
[ $MDSCOUNT -lt 2 ] && skip_env "needs >= 2 MDTs"
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.55) ]] &&
+ [[ $MDS1_VERSION -lt $(version_code 2.8.55) ]] &&
skip "Need MDS version at least 2.8.55"
remote_mds_nodsh && skip "remote MDS with nodsh"
run_test 407 "transaction fail should cause operation fail"
test_408() {
- dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 oflag=direct
+ dd if=/dev/zero of=$DIR/$tfile bs=$PAGE_SIZE count=1 oflag=direct
#define OBD_FAIL_OSC_BRW_PREP_REQ2 0x40a
lctl set_param fail_loc=0x8000040a
test_410()
{
- [[ $(lustre_version_code client) -lt $(version_code 2.9.59) ]] &&
+ [[ $CLIENT_VERSION -lt $(version_code 2.9.59) ]] &&
skip "Need client version at least 2.9.59"
# Create a file, and stat it from the kernel
echo 1M > $cgdir/memory.limit_in_bytes
# Should not LBUG, just be killed by oom-killer
- sh -c "echo \$$ > $cgdir/tasks && dd if=$DIR/$tfile of=/dev/null" &&
- error "fail to trigger a memory allocation error"
-
+ # dd will return 0 even allocation failure in some environment.
+ # So don't check return value
+ sh -c "echo \$$ > $cgdir/tasks && dd if=$DIR/$tfile of=/dev/null"
cleanup_test411_cgroup $cgdir
return 0
total=500
# this test may be slow on ZFS
- [ "$(facet_fstype mds1)" == "zfs" ] && total=100
+ [ "$mds1_FSTYPE" == "zfs" ] && total=100
# though this test is designed for striped directory, let's test normal
# directory too since lock is always saved as CoS lock.
}
run_test 415 "lock revoke is not missing"
+test_416() {
+ [ $(lustre_version_code mds1) -lt $(version_code 2.11.55) ] &&
+ skip "Need server version at least 2.11.55"
+
+ # define OBD_FAIL_OSD_TXN_START 0x19a
+ do_facet mds1 lctl set_param fail_loc=0x19a
+
+ lfs mkdir -c $MDSCOUNT $DIR/$tdir
+
+ true
+}
+run_test 416 "transaction start failure won't cause system hung"
+
+cleanup_417() {
+ trap 0
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param -n mdt.*MDT*.enable_dir_migration=1"
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param -n mdt.*MDT*.enable_remote_dir=1"
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param -n mdt.*MDT*.enable_striped_dir=1"
+}
+
+test_417() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ [[ $MDS1_VERSION -lt $(version_code 2.11.56) ]] &&
+ skip "Need MDS version at least 2.11.56"
+
+ trap cleanup_417 RETURN EXIT
+
+ $LFS mkdir -i 1 $DIR/$tdir.1 || error "create remote dir $tdir.1 failed"
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param -n mdt.*MDT*.enable_dir_migration=0"
+ $LFS migrate -m 0 $DIR/$tdir.1 &&
+ error "migrate dir $tdir.1 should fail"
+
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param -n mdt.*MDT*.enable_remote_dir=0"
+ $LFS mkdir -i 1 $DIR/$tdir.2 &&
+ error "create remote dir $tdir.2 should fail"
+
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param -n mdt.*MDT*.enable_striped_dir=0"
+ $LFS mkdir -c 2 $DIR/$tdir.3 &&
+ error "create striped dir $tdir.3 should fail"
+ true
+}
+run_test 417 "disable remote dir, striped dir and dir migration"
+
+# Checks that the outputs of df [-i] and lfs df [-i] match
+#
+# usage: check_lfs_df <blocks | inodes> <mountpoint>
+check_lfs_df() {
+ local dir=$2
+ local inodes
+ local df_out
+ local lfs_df_out
+
+ # blocks or inodes
+ [ "$1" == "blocks" ] && inodes= || inodes="-i"
+
+ # read the lines of interest
+ df_out=($(df $inodes $dir | tail -n +2)) ||
+ error "df $inodes $dir | tail -n +2 failed"
+ lfs_df_out=($($LFS df $inodes $dir | grep filesystem_summary:)) ||
+ error "lfs df $inodes $dir | grep filesystem_summary: failed"
+
+ # skip the first substrings of each command output as they are different
+ # <NID>:/<fsname for df, filesystem_summary: for lfs df
+ df_out=(${df_out[@]:1})
+ lfs_df_out=(${lfs_df_out[@]:1})
+
+ # compare the two outputs
+ for i in {0..4}; do
+ [ "${df_out[i]}" != "${lfs_df_out[i]}" ] &&
+ error "df and lfs df output mismatch:" \
+ "df${inodes}: ${df_out[*]}," \
+ "lfs df${inodes}: ${lfs_df_out[*]}"
+ done
+}
+
+test_418() {
+ local dir=$DIR/$tdir
+ local numfiles=$((RANDOM % 4096 + 2))
+ local numblocks=$((RANDOM % 256 + 1))
+
+ wait_delete_completed
+ test_mkdir $dir
+
+ # check block output
+ check_lfs_df blocks $dir
+ # check inode output
+ check_lfs_df inodes $dir
+
+ # create a single file and retest
+ echo "Creating a single file and testing"
+ createmany -o $dir/$tfile- 1 &>/dev/null ||
+ error "creating 1 file in $dir failed"
+ cancel_lru_locks osc
+ sync; sleep 2
+ check_lfs_df blocks $dir
+ check_lfs_df inodes $dir
+
+ # create a random number of files
+ echo "Creating $((numfiles - 1)) files and testing"
+ createmany -o $dir/$tfile- 1 $((numfiles - 1)) &>/dev/null ||
+ error "creating $((numfiles - 1)) files in $dir failed"
+
+ # write a random number of blocks to the first test file
+ echo "Writing $numblocks 4K blocks and testing"
+ dd if=/dev/urandom of=$dir/${tfile}-0 bs=4K conv=fsync \
+ count=$numblocks &>/dev/null ||
+ error "dd to $dir/${tfile}-0 failed"
+
+ # retest
+ cancel_lru_locks osc
+ sync; sleep 10
+ check_lfs_df blocks $dir
+ check_lfs_df inodes $dir
+
+ unlinkmany $dir/$tfile- $numfiles &>/dev/null ||
+ error "unlinking $numfiles files in $dir failed"
+}
+run_test 418 "df and lfs df outputs match"
+
prep_801() {
[[ $(lustre_version_code mds1) -lt $(version_code 2.9.55) ]] ||
- [[ $(lustre_version_code ost1) -lt $(version_code 2.9.55) ]] &&
+ [[ $OST1_VERSION -lt $(version_code 2.9.55) ]] &&
skip "Need server version at least 2.9.55"
start_full_debug_logging
}
barrier_stat() {
- if [ $(lustre_version_code mgs) -le $(version_code 2.10.0) ]; then
+ if [ $MGS_VERSION -le $(version_code 2.10.0) ]; then
local st=$(do_facet mgs $LCTL barrier_stat $FSNAME |
awk '/The barrier for/ { print $7 }')
echo $st
barrier_expired() {
local expired
- if [ $(lustre_version_code mgs) -le $(version_code 2.10.0) ]; then
+ if [ $MGS_VERSION -le $(version_code 2.10.0) ]; then
expired=$(do_facet mgs $LCTL barrier_stat $FSNAME |
awk '/will be expired/ { print $7 }')
else
test_802() {
[[ $(lustre_version_code mds1) -lt $(version_code 2.9.55) ]] ||
- [[ $(lustre_version_code ost1) -lt $(version_code 2.9.55) ]] &&
+ [[ $OST1_VERSION -lt $(version_code 2.9.55) ]] &&
skip "Need server version at least 2.9.55"
[[ $ENABLE_QUOTA ]] && skip "Quota enabled for read-only test"
test_803() {
[[ $MDSCOUNT -lt 2 ]] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.54) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.54) ] &&
skip "MDS needs to be newer than 2.10.54"
mkdir -p $DIR/$tdir
done
sync; sleep 3
+ wait_delete_completed # ensure old test cleanups are finished
echo "before create:"
$LFS df -i $MOUNT
local before_used=$($LFS df -i | grep MDT0000_UUID | awk '{print $3}')
- for ((i=0; i<10; i++)); do
+ for i in {1..10}; do
$LFS mkdir -c 1 -i 1 $DIR/$tdir/foo$i ||
error "Fail to create $DIR/$tdir/foo$i"
done
$LFS df -i $MOUNT
local after_used=$($LFS df -i | grep MDT0000_UUID | awk '{print $3}')
- [ $after_used -ge $((before_used + 10)) ] ||
+ # allow for an llog to be cleaned up during the test
+ [ $after_used -ge $((before_used + 10 - 1)) ] ||
error "before ($before_used) + 10 > after ($after_used)"
- for ((i=0; i<10; i++)); do
+ for i in {1..10}; do
rm -rf $DIR/$tdir/foo$i ||
error "Fail to remove $DIR/$tdir/foo$i"
done
wait_delete_completed
echo "after unlink:"
$LFS df -i $MOUNT
- before_used=$after_used
after_used=$($LFS df -i | grep MDT0000_UUID | awk '{print $3}')
- [ $after_used -le $((before_used - 8)) ] ||
- error "before ($before_used) - 8 < after ($after_used)"
+ # allow for an llog to be created during the test
+ [ $after_used -le $((before_used + 1)) ] ||
+ error "after ($after_used) > before ($before_used) + 1"
}
run_test 803 "verify agent object for remote object"
test_804() {
[[ $MDSCOUNT -lt 2 ]] && skip_env "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.54) ] &&
+ [ $MDS1_VERSION -lt $(version_code 2.10.54) ] &&
skip "MDS needs to be newer than 2.10.54"
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip_env "ldiskfs only test"
+ [ "$mds1_FSTYPE" != "ldiskfs" ] && skip_env "ldiskfs only test"
mkdir -p $DIR/$tdir
$LFS mkdir -c 1 -i 1 $DIR/$tdir/dir0 ||
test_805() {
local zfs_version=$(do_node $SINGLEMDS cat /sys/module/zfs/version)
- [ "$(facet_fstype mds1)" != "zfs" ] &&
- skip "ZFS specific test"
+ [ "$mds1_FSTYPE" != "zfs" ] && skip "ZFS specific test"
[ $(version_code $zfs_version) -lt $(version_code 0.7.2) ] &&
skip "netfree not implemented before 0.7"
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.57) ]] ||
+ [[ $MDS1_VERSION -ge $(version_code 2.10.57) ]] ||
skip "Need MDS version at least 2.10.57"
local fsset
}
test_806() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
- skip "Need MDS version at least 2.11.52" && return
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
local bs=1048576
local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
save_lustre_params client "llite.*.xattr_cache" > $save
lctl set_param llite.*.xattr_cache=0
- stack_trap "restore_lustre_params < $save" EXIT
+ stack_trap "restore_lustre_params < $save; rm -f $save" EXIT
# single-threaded write
echo "Test SOM for single-threaded write"
local offset=0
local i
- echo "Test SOM for single client muti-threaded($num) write"
+ echo "Test SOM for single client multi-threaded($num) write"
$TRUNCATE $DIR/$tfile 0
for ((i = 0; i < $num; i++)); do
$MULTIOP $DIR/$tfile Oz${offset}w${bs}c &
offset=0
i=0
- echo "Test SOM for muti-client ($num) writes"
+ echo "Test SOM for multi-client ($num) writes"
$TRUNCATE $DIR/$tfile 0
for client in ${CLIENTS//,/ }; do
do_node $client $MULTIOP $DIR/$tfile Oz${offset}w${bs}c &
run_test 806 "Verify Lazy Size on MDS"
test_807() {
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.52) ] &&
- skip "Need MDS version at least 2.11.52" && return
+ [ $MDS1_VERSION -lt $(version_code 2.11.52) ] &&
+ skip "Need MDS version at least 2.11.52"
# Registration step
changelog_register || error "changelog_register failed"
local save="$TMP/$TESTSUITE-$TESTNAME.parameters"
save_lustre_params client "llite.*.xattr_cache" > $save
lctl set_param llite.*.xattr_cache=0
- stack_trap "restore_lustre_params < $save" EXIT
+ stack_trap "restore_lustre_params < $save; rm -f $save" EXIT
rm -rf $DIR/$tdir || error "rm $tdir failed"
mkdir -p $DIR/$tdir || error "mkdir $tdir failed"
local offset=0
local i=0
- echo "Test SOM for muti-client ($num) writes"
+ echo "Test SOM for multi-client ($num) writes"
touch $DIR/$tfile || error "touch $tfile failed"
$TRUNCATE $DIR/$tfile 0
for client in ${CLIENTS//,/ }; do
}
run_test 807 "verify LSOM syncing tool"
+check_som_nologged()
+{
+ local lines=$($LFS changelog $FSNAME-MDT0000 |
+ grep 'x=trusted.som' | wc -l)
+ [ $lines -ne 0 ] && error "trusted.som xattr is logged in Changelogs"
+}
+
+test_808() {
+ [ $MDS1_VERSION -lt $(version_code 2.11.55) ] &&
+ skip "Need MDS version at least 2.11.55"
+
+ # Registration step
+ changelog_register || error "changelog_register failed"
+
+ touch $DIR/$tfile || error "touch $tfile failed"
+ check_som_nologged
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1048576 count=1 ||
+ error "write $tfile failed"
+ check_som_nologged
+
+ $TRUNCATE $DIR/$tfile 1234
+ check_som_nologged
+
+ $TRUNCATE $DIR/$tfile 1048576
+ check_som_nologged
+
+ # Deregistration step
+ changelog_deregister || error "changelog_deregister failed"
+}
+run_test 808 "Check trusted.som xattr not logged in Changelogs"
+
+check_som_nodata()
+{
+ $LFS getsom $1
+ [[ $? -eq 61 ]] || error "DoM-only file $1 has SOM xattr"
+}
+
+test_809() {
+ [ $MDS1_VERSION -lt $(version_code 2.11.56) ] &&
+ skip "Need MDS version at least 2.11.56"
+
+ $LFS setstripe -E 1M -L mdt $DIR/$tfile ||
+ error "failed to create DoM-only file $DIR/$tfile"
+ touch $DIR/$tfile || error "touch $tfile failed"
+ check_som_nodata $DIR/$tfile
+
+ dd if=/dev/zero of=$DIR/$tfile bs=2048 count=1 ||
+ error "write $tfile failed"
+ check_som_nodata $DIR/$tfile
+
+ $TRUNCATE $DIR/$tfile 1234
+ check_som_nodata $DIR/$tfile
+
+ $TRUNCATE $DIR/$tfile 4097
+ check_som_nodata $DIR/$file
+}
+run_test 809 "Verify no SOM xattr store for DoM-only files"
+
+test_810() {
+ local ORIG
+ local CSUM
+
+ # t10 seem to dislike partial pages
+ lctl set_param osc.*.checksum_type=adler
+ lctl set_param fail_loc=0x411
+ dd if=/dev/urandom of=$DIR/$tfile bs=10240 count=2
+ ORIG=$(md5sum $DIR/$tfile)
+ lctl set_param ldlm.namespaces.*osc*.lru_size=clear
+ CSUM=$(md5sum $DIR/$tfile)
+ set_checksum_type adler
+ if [ "$ORIG" != "$CSUM" ]; then
+ error "$ORIG != $CSUM"
+ fi
+}
+run_test 810 "partial page writes on ZFS (LU-11663)"
+
+test_811() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.56) ] &&
+ skip "Need MDS version at least 2.11.56"
+
+ #define OBD_FAIL_MDS_ORPHAN_DELETE 0x165
+ do_facet mds1 $LCTL set_param fail_loc=0x165
+ $MULTIOP $DIR/$tfile Ouc || error "multiop failed"
+
+ stop mds1
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+
+ sleep 5
+ [[ $(do_facet mds1 pgrep orph_.*-MDD | wc -l) -eq 0 ]] ||
+ error "MDD orphan cleanup thread not quit"
+}
+run_test 811 "orphan name stub can be cleaned up in startup"
+
#
# tests that do cleanup/setup should be run at the end
#