export PATH=$PWD/$SRCDIR:$SRCDIR:$PWD/$SRCDIR/../utils:$PATH:/sbin
ONLY=${ONLY:-"$*"}
-ALWAYS_EXCEPT="$SANITY_QUOTA_EXCEPT"
+# test_11 has been used to protect a kernel bug(bz10912), now it isn't
+# useful any more. Then add it to ALWAYS_EXCEPT. b=19835
+ALWAYS_EXCEPT="10 $SANITY_QUOTA_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="9 10 11"
case `uname -r` in
2.6*) FSTYPE=${FSTYPE:-ldiskfs};;
TSTUSR=${TSTUSR:-"quota_usr"}
TSTUSR2=${TSTUSR2:-"quota_2usr"}
BLK_SZ=1024
-BUNIT_SZ=${BUNIT_SZ:-1000} # default 1000 quota blocks
-BTUNE_SZ=${BTUNE_SZ:-500} # default 50% of BUNIT_SZ
-IUNIT_SZ=${IUNIT_SZ:-10} # default 10 files
-ITUNE_SZ=${ITUNE_SZ:-5} # default 50% of IUNIT_SZ
+BUNIT_SZ=${BUNIT_SZ:-1024} # min block quota unit(kB)
+IUNIT_SZ=${IUNIT_SZ:-10} # min inode quota unit
MAX_DQ_TIME=604800
MAX_IQ_TIME=604800
. $LUSTRE/tests/test-framework.sh
init_test_env $@
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+init_logging
+DIRECTIO=${DIRECTIO:-$LUSTRE/tests/directio}
+
+[ $MDSCOUNT -gt 1 ] && skip "CMD case" && exit 0
+
+require_dsh_mds || exit 0
+require_dsh_ost || exit 0
+
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="9 10 11 18b 21"
QUOTALOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
DIR=${DIR:-$MOUNT}
DIR2=${DIR2:-$MOUNT2}
-cleanup_and_setup_lustre
+QUOTA_AUTO_OLD=$QUOTA_AUTO
+export QUOTA_AUTO=0
-LOVNAME=`cat $LPROC/llite/*/lov/common_name | tail -n 1`
-OSTCOUNT=`cat $LPROC/lov/$LOVNAME/numobd`
+check_and_setup_lustre
-SHOW_QUOTA_USER="$LFS quota -u $TSTUSR $DIR"
-SHOW_QUOTA_GROUP="$LFS quota -g $TSTUSR $DIR"
-SHOW_QUOTA_INFO="$LFS quota -t $DIR"
+LOVNAME=`lctl get_param -n llite.*.lov.common_name | tail -n 1`
+OSTCOUNT=`lctl get_param -n lov.$LOVNAME.numobd`
-build_test_filter
+SHOW_QUOTA_USER="$LFS quota -v -u $TSTUSR $DIR"
+SHOW_QUOTA_USERID="$LFS quota -v -u $TSTID $DIR"
+SHOW_QUOTA_USER2="$LFS quota -v -u $TSTUSR2 $DIR"
+SHOW_QUOTA_GROUP="$LFS quota -v -g $TSTUSR $DIR"
+SHOW_QUOTA_GROUPID="$LFS quota -v -g $TSTID $DIR"
+SHOW_QUOTA_GROUP2="$LFS quota -v -g $TSTUSR2 $DIR"
+SHOW_QUOTA_INFO_USER="$LFS quota -t -u $DIR"
+SHOW_QUOTA_INFO_GROUP="$LFS quota -t -g $DIR"
-eval ONLY_0=true
-eval ONLY_99=true
+# control the time of tests
+cycle=30
+[ "$SLOW" = "no" ] && cycle=10
+
+build_test_filter
# set_blk_tunables(btune_sz)
set_blk_tunesz() {
+ local btune=$(($1 * BLK_SZ))
# set btune size on all obdfilters
- do_facet ost1 "set -x; for i in /proc/fs/lustre/obdfilter/*/quota_btune_sz; do
- echo $(($1 * BLK_SZ)) >> \\\$i;
- done"
+ do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_btune_sz=$btune"
# set btune size on mds
- do_facet $SINGLEMDS "for i in /proc/fs/lustre/mds/${FSNAME}-MDT*/quota_btune_sz; do
- echo $(($1 * BLK_SZ)) >> \\\$i;
- done"
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_btune_sz=$btune"
}
# set_blk_unitsz(bunit_sz)
set_blk_unitsz() {
- do_facet ost1 "for i in /proc/fs/lustre/obdfilter/*/quota_bunit_sz; do
- echo $(($1 * BLK_SZ)) >> \\\$i;
- done"
- do_facet $SINGLEMDS "for i in /proc/fs/lustre/mds/${FSNAME}-MDT*/quota_bunit_sz; do
- echo $(($1 * BLK_SZ)) >> \\\$i;
- done"
+ local bunit=$(($1 * BLK_SZ))
+ # set bunit size on all obdfilters
+ do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_bunit_sz=$bunit"
+ # set bunit size on mds
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_bunit_sz=$bunit"
}
# set_file_tunesz(itune_sz)
set_file_tunesz() {
- # set iunit and itune size on all obdfilters
- do_facet ost1 "for i in /proc/fs/lustre/obdfilter/*/quota_itune_sz; do
- echo $1 >> \\\$i;
- done"
- # set iunit and itune size on mds
- do_facet $SINGLEMDS "for i in /proc/fs/lustre/mds/${FSNAME}-MDT*/quota_itune_sz; do
- echo $1 >> \\\$i;
- done"
+ local itune=$1
+ # set itune size on all obdfilters
+ do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_itune_sz=$itune"
+ # set itune size on mds
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_itune_sz=$itune"
}
# set_file_unitsz(iunit_sz)
set_file_unitsz() {
- do_facet ost1 "for i in /proc/fs/lustre/obdfilter/*/quota_iunit_sz; do
- echo $1 >> \\\$i;
- done"
- do_facet $SINGLEMDS "for i in /proc/fs/lustre/mds/${FSNAME}-MDT*/quota_iunit_sz; do
- echo $1 >> \\\$i;
- done"
+ local iunit=$1
+ # set iunit size on all obdfilters
+ do_facet ost1 "lctl set_param lquota.${FSNAME}-OST*.quota_iunit_sz=$iunit"
+ # set iunit size on mds
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_iunit_sz=$iunit"
}
-# These are for test on local machine,if run sanity-quota.sh on
-# real cluster, ltest should have setup the test environment:
-#
-# - create test user/group on all servers with same id.
-# - set unit size/tune on all servers size to reasonable value.
-pre_test() {
- if [ -z "$NOSETUP" ]; then
- # set block tunables
- set_blk_tunesz $BTUNE_SZ
- set_blk_unitsz $BUNIT_SZ
- # set file tunables
- set_file_tunesz $ITUNE_SZ
- set_file_unitsz $IUNIT_SZ
+lustre_fail() {
+ local fail_node=$1
+ local fail_loc=$2
+ local fail_val=${3:-0}
+
+ if [ $fail_node == "mds" ] || [ $fail_node == "mds_ost" ]; then
+ if [ $((fail_loc & 0x10000000)) -ne 0 -a $fail_val -gt 0 ] || \
+ [ $((fail_loc)) -eq 0 ]; then
+ do_facet $SINGLEMDS "lctl set_param fail_val=$fail_val"
+ fi
+ do_facet $SINGLEMDS "lctl set_param fail_loc=$fail_loc"
fi
-}
-pre_test
-
-post_test() {
- if [ -z "$NOSETUP" ]; then
- # restore block tunables to default size
- set_blk_unitsz $((1024 * 100))
- set_blk_tunesz $((1024 * 50))
- # restore file tunables to default size
- set_file_unitsz 5000
- set_file_tunesz 2500
+ if [ $fail_node == "ost" ] || [ $fail_node == "mds_ost" ]; then
+ for num in `seq $OSTCOUNT`; do
+ if [ $((fail_loc & 0x10000000)) -ne 0 -a $fail_val -gt 0 ] || \
+ [ $((fail_loc)) -eq 0 ]; then
+ do_facet ost$num "lctl set_param fail_val=$fail_val"
+ fi
+ do_facet ost$num "lctl set_param fail_loc=$fail_loc"
+ done
fi
}
-RUNAS="runas -u $TSTID"
-RUNAS2="runas -u $TSTID2"
-FAIL_ON_ERROR=true check_runas_id $TSTID $RUNAS
-FAIL_ON_ERROR=true check_runas_id $TSTID2 $RUNAS2
+RUNAS="runas -u $TSTID -g $TSTID"
+RUNAS2="runas -u $TSTID2 -g $TSTID2"
+FAIL_ON_ERROR=true check_runas_id $TSTID $TSTID $RUNAS
+FAIL_ON_ERROR=true check_runas_id $TSTID2 $TSTID2 $RUNAS2
FAIL_ON_ERROR=false
+run_test_with_stat() {
+ (($# != 2)) && error "the number of arguments is wrong"
+
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.stats=0" > /dev/null
+ for j in `seq $OSTCOUNT`; do
+ do_facet ost$j "lctl set_param lquota.${FSNAME}-OST*.stats=0" > /dev/null
+ done
+ run_test "$@"
+ if [ ${STAT:-"yes"} != "no" -a -z "$LAST_SKIPPED" ]; then
+ echo "statistics info begin ***************************************"
+ do_facet $SINGLEMDS "lctl get_param lquota.mdd_obd-${FSNAME}-MDT*.stats"
+ for j in `seq $OSTCOUNT`; do
+ do_facet ost$j "lctl get_param lquota.${FSNAME}-OST*.stats"
+ done
+ echo "statistics info end ***************************************"
+ fi
+}
+
+#
+# clear quota limits for a user or a group
+# usage: resetquota -u username
+# resetquota -g groupname
+
+resetquota() {
+ [ "$#" != 2 ] && error "resetquota: wrong number of arguments: $#"
+ [ "$1" != "-u" -a "$1" != "-g" ] && error "resetquota: wrong specifier $1 passed"
+
+ count=0
+ if at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+
+ while [ $((count++)) -lt $timeout ]; do
+ $LFS setquota "$1" "$2" -b 0 -B 0 -i 0 -I 0 $MOUNT
+ RC=$?
+ if [ $RC -ne 0 ]; then
+ if [ $RC -eq 240 ]; then # 240 means -EBUSY
+ log "resetquota is blocked for quota master recovery, retry after 1 sec"
+ sleep 1
+ continue
+ else
+ error "resetquota failed: $RC"
+ fi
+ fi
+ break
+ done
+
+ [ $count -lt $timeout ] || error "resetquota timeout: $timeout"
+}
+
+quota_scan() {
+ LOCAL_UG=$1
+ LOCAL_ID=$2
+
+ if [ "$LOCAL_UG" == "a" -o "$LOCAL_UG" == "u" ]; then
+ log "Files for user ($LOCAL_ID):"
+ ($LFS find -user $LOCAL_ID $DIR | xargs stat 2>/dev/null)
+ fi
+
+ if [ "$LOCAL_UG" == "a" -o "$LOCAL_UG" == "g" ]; then
+ log "Files for group ($LOCAL_ID):"
+ ($LFS find -group $LOCAL_ID $DIR | xargs stat 2>/dev/null)
+ fi
+}
+
+quota_error() {
+ quota_scan $1 $2
+ shift 2
+ error "$*"
+}
+
+quota_log() {
+ quota_scan $1 $2
+ shift 2
+ log "$*"
+}
+
+quota_show_check() {
+ LOCAL_BF=$1
+ LOCAL_UG=$2
+ LOCAL_ID=$3
+ PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
+
+ $LFS quota -v -$LOCAL_UG $LOCAL_ID $DIR
+
+ if [ "$LOCAL_BF" == "a" -o "$LOCAL_BF" == "b" ]; then
+ USAGE="`$LFS quota -$LOCAL_UG $LOCAL_ID $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $2 }'`"
+ if [ -z $USAGE ]; then
+ quota_error $LOCAL_UG $LOCAL_ID "System is error when query quota for block ($LOCAL_UG:$LOCAL_ID)."
+ else
+ [ $USAGE -ne 0 ] && quota_log $LOCAL_UG $LOCAL_ID "System is not clean for block ($LOCAL_UG:$LOCAL_ID:$USAGE)."
+ fi
+ fi
+
+ if [ "$LOCAL_BF" == "a" -o "$LOCAL_BF" == "f" ]; then
+ USAGE="`$LFS quota -$LOCAL_UG $LOCAL_ID $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $5 }'`"
+ if [ -z $USAGE ]; then
+ quota_error $LOCAL_UG $LOCAL_ID "System is error when query quota for file ($LOCAL_UG:$LOCAL_ID)."
+ else
+ [ $USAGE -ne 0 ] && quota_log $LOCAL_UG $LOCAL_ID "System is not clean for file ($LOCAL_UG:$LOCAL_ID:$USAGE)."
+ fi
+ fi
+}
+
# set quota
-test_0() {
- $LFS quotaoff -ug $DIR
+quota_init() {
$LFS quotacheck -ug $DIR
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+
+ do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=+quota"
}
-run_test 0 "Set quota ============================="
+quota_init
-# block hard limit (normal use and out of quota)
-test_1() {
+# test for specific quota limitation, qunit, qtune $1=block_quota_limit
+test_1_sub() {
+ LIMIT=$1
+ mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
- LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 5)) # 5 bunits each sever
- TESTFILE=$DIR/$tdir/$tfile-0
-
- echo " User quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
- $SHOW_QUOTA_USER
-
- $LFS setstripe $TESTFILE -c 1
- chown $TSTUSR.$TSTUSR $TESTFILE
+ wait_delete_completed
- echo " Write ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || error "(usr) write failure, but expect success"
- echo " Done"
- echo " Write out of block quota ..."
+ # test for user
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ sleep 3
+ quota_show_check b u $TSTUSR
+
+ $LFS setstripe $TESTFILE -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ log " Write ..."
+ stime=`date +%s`
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || quota_error u $TSTUSR "(usr) write failure, but expect success"
+ etime=`date +%s`
+ delta=$((etime - stime))
+ if [ $delta -gt 0 ]; then
+ rate=$((BLK_SZ * LIMIT / 2 / delta / 1024))
+ [ $rate -gt 1024 ] || error "SLOW IO for $TSTUSR (user): $rate KB/sec"
+ fi
+ log " Done"
+ log " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
# flush cache, ensure noquota flag is setted on client
+ cancel_lru_locks osc
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && quota_error u $TSTUSR "(usr) write success, but expect EDQUOT"
+
+ rm -f $TESTFILE
sync; sleep 1; sync;
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && error "(usr) write success, but expect EDQUOT"
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+ OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ echo $OST0_QUOTA_USED
+ [ $OST0_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_USER; quota_error u $TSTUSR "(usr) quota deleted isn't released")
+ $SHOW_QUOTA_USER
+ resetquota -u $TSTUSR
- rm -f $TESTFILE
-
- echo " Group quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR # clear user limit
- $LFS setquota -g $TSTUSR 0 $LIMIT 0 0 $DIR
- $SHOW_QUOTA_GROUP
- TESTFILE=$DIR/$tdir/$tfile-1
+ # test for group
+ log "--------------------------------------"
+ log " Group quota (limit: $LIMIT kbytes)"
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ sleep 3
+ quota_show_check b g $TSTUSR
+ TESTFILE="$DIR/$tdir/$tfile-1"
- $LFS setstripe $TESTFILE -c 1
- chown $TSTUSR.$TSTUSR $TESTFILE
+ $LFS setstripe $TESTFILE -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
- echo " Write ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || error "(grp) write failure, but expect success"
- echo " Done"
- echo " Write out of block quota ..."
+ log " Write ..."
+ stime=`date +%s`
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) || quota_error g $TSTUSR "(grp) write failure, but expect success"
+ etime=`date +%s`
+ delta=$((etime - stime))
+ if [ $delta -gt 0 ]; then
+ rate=$((BLK_SZ * LIMIT / 2 / delta / 1024))
+ [ $rate -gt 1024 ] || error "SLOW IO for $TSTUSR (group): $rate KB/sec"
+ fi
+ log " Done"
+ log " Write out of block quota ..."
# this time maybe cache write, ignore it's failure
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
- sync; sleep 1; sync;
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && error "(grp) write success, but expect EDQUOT"
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT/2)) seek=$(($LIMIT/2)) || true
+ cancel_lru_locks osc
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$LIMIT && quota_error g $TSTUSR "(grp) write success, but expect EDQUOT"
# cleanup
- rm -f $TESTFILE
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ rm -f $TESTFILE
+ sync; sleep 1; sync;
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+ OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ echo $OST0_QUOTA_USED
+ [ $OST0_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_GROUP; quota_error g $TSTUSR "(grp) quota deleted isn't released")
+ $SHOW_QUOTA_GROUP
+ resetquota -g $TSTUSR
}
-run_test 1 "Block hard limit (normal use and out of quota) ==="
-# file hard limit (normal use and out of quota)
-test_2() {
+# block hard limit (normal use and out of quota)
+test_1() {
+ for i in `seq 1 $cycle`; do
+ # define blk_qunit is between 1M and 4M
+ blk_qunit=$(( $RANDOM % 3072 + 1024 ))
+ blk_qtune=$(( $RANDOM % $blk_qunit ))
+ # other osts and mds will occupy at 1M blk quota
+ b_limit=$(( ($RANDOM - 16384) / 8 + ($OSTCOUNT + 1) * $blk_qunit * 4 ))
+ set_blk_tunesz $blk_qtune
+ set_blk_unitsz $blk_qunit
+ echo "cycle: $i(total $cycle) bunit:$blk_qunit, btune:$blk_qtune, blimit:$b_limit"
+ test_1_sub $b_limit
+ echo "=================================================="
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+ done
+}
+run_test_with_stat 1 "Block hard limit (normal use and out of quota) ==="
+
+# test for specific quota limitation, qunit, qtune $1=block_quota_limit
+test_2_sub() {
+ LIMIT=$1
+ mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
- LIMIT=$(($IUNIT_SZ * 10)) # 10 iunits on mds
- TESTFILE=$DIR/$tdir/$tfile-0
+ wait_delete_completed
- echo " User quota (limit: $LIMIT files)"
- $LFS setquota -u $TSTUSR 0 0 0 $LIMIT $DIR
- $SHOW_QUOTA_USER
+ # test for user
+ log " User quota (limit: $LIMIT files)"
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
+ sleep 3
+ quota_show_check f u $TSTUSR
- echo " Create $LIMIT files ..."
+ log " Create $LIMIT files ..."
$RUNAS createmany -m ${TESTFILE} $LIMIT || \
- error "(usr) create failure, but except success"
- echo " Done"
- echo " Create out of file quota ..."
+ quota_error u $TSTUSR "(usr) create failure, but expect success"
+ log " Done"
+ log " Create out of file quota ..."
$RUNAS touch ${TESTFILE}_xxx && \
- error "(usr) touch success, but expect EDQUOT"
+ quota_error u $TSTUSR "(usr) touch success, but expect EDQUOT"
unlinkmany ${TESTFILE} $LIMIT
- rm ${TESTFILE}_xxx
+ rm -f ${TESTFILE}_xxx
+ sync; sleep 1; sync;
- echo " Group quota (limit: $LIMIT files)"
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR # clear user limit
- $LFS setquota -g $TSTUSR 0 0 0 $LIMIT $DIR
- $SHOW_QUOTA_GROUP
- TESTFILE=$DIR/$tdir/$tfile-1
+ MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
+ MDS_QUOTA_USED=`$LFS quota -o $MDS_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ echo $MDS_QUOTA_USED
+ [ $MDS_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_USER; quota_error u $TSTUSR "(usr) quota deleted isn't released")
+ $SHOW_QUOTA_USER
+ resetquota -u $TSTUSR
- echo " Create $LIMIT files ..."
+ # test for group
+ log "--------------------------------------"
+ log " Group quota (limit: $LIMIT FILE)"
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i 0 -I $LIMIT $DIR
+ sleep 3
+ quota_show_check f g $TSTUSR
+ TESTFILE=$DIR/$tdir/$tfile-1
+
+ log " Create $LIMIT files ..."
$RUNAS createmany -m ${TESTFILE} $LIMIT || \
- error "(grp) create failure, but expect success"
+ quota_error g $TSTUSR "(grp) create failure, but expect success"
+ log " Done"
+ log " Create out of file quota ..."
+ $RUNAS touch ${TESTFILE}_xxx && \
+ quota_error g $TSTUSR "(grp) touch success, but expect EDQUOT"
- echo " Done"
- echo " Create out of file quota ..."
- $RUNAS touch ${TESTFILE}_xxx && \
- error "(grp) touch success, but expect EDQUOT"
+ unlinkmany ${TESTFILE} $LIMIT
+ rm -f ${TESTFILE}_xxx
+ sync; sleep 1; sync;
- $RUNAS touch ${TESTFILE}_xxx > /dev/null 2>&1 && error "(grp) touch success, but expect EDQUOT"
+ MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
+ MDS_QUOTA_USED=`$LFS quota -o $MDS_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ echo $MDS_QUOTA_USED
+ [ $MDS_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_GROUP; quota_error g $TSTUSR "(grp) quota deleted isn't released")
+ $SHOW_QUOTA_GROUP
+ resetquota -g $TSTUSR
+}
- # cleanup
- unlinkmany ${TESTFILE} $LIMIT
- rm ${TESTFILE}_xxx
+# file hard limit (normal use and out of quota)
+test_2() {
+ for i in `seq 1 $cycle`; do
+ if [ $i -eq 1 ]; then
+ ino_qunit=52
+ ino_qtune=41
+ i_limit=11
+ else
+ # define ino_qunit is between 10 and 100
+ ino_qunit=$(( $RANDOM % 90 + 10 ))
+ ino_qtune=$(( $RANDOM % $ino_qunit ))
+ # RANDOM's maxium is 32767
+ i_limit=$(( $RANDOM % 990 + 10 ))
+ fi
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ set_file_tunesz $ino_qtune
+ set_file_unitsz $ino_qunit
+ echo "cycle: $i(total $cycle) iunit:$ino_qunit, itune:$ino_qtune, ilimit:$i_limit"
+ test_2_sub $i_limit
+ echo "=================================================="
+ set_file_unitsz 5120
+ set_file_tunesz 2560
+ done
}
-run_test 2 "File hard limit (normal use and out of quota) ==="
+run_test_with_stat 2 "File hard limit (normal use and out of quota) ==="
test_block_soft() {
TESTFILE=$1
TIMER=$(($2 * 3 / 2))
OFFSET=0
+ wait_delete_completed
+
echo " Write to exceed soft limit"
RUNDD="$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ"
$RUNDD count=$((BUNIT_SZ+1)) || \
- error "write failure, but expect success"
+ quota_error a $TSTUSR "write failure, but expect success"
OFFSET=$((OFFSET + BUNIT_SZ + 1))
- sync; sleep 1; sync;
+ cancel_lru_locks osc
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Write before timer goes off"
$RUNDD count=$BUNIT_SZ seek=$OFFSET || \
- error "write failure, but expect success"
+ quota_error a $TSTUSR "write failure, but expect success"
OFFSET=$((OFFSET + BUNIT_SZ))
- sync; sleep 1; sync;
+ cancel_lru_locks osc
echo " Done"
-
+
echo " Sleep $TIMER seconds ..."
sleep $TIMER
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Write after timer goes off"
# maybe cache write, ignore.
- sync; sleep 1; sync;
$RUNDD count=$BUNIT_SZ seek=$OFFSET || true
OFFSET=$((OFFSET + BUNIT_SZ))
- sync; sleep 1; sync;
+ cancel_lru_locks osc
$RUNDD count=$BUNIT_SZ seek=$OFFSET && \
- error "write success, but expect EDQUOT"
+ quota_error a $TSTUSR "write success, but expect EDQUOT"
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Unlink file to stop timer"
rm -f $TESTFILE
+ sync; sleep 1; sync
echo " Done"
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
echo " Write ..."
- $RUNDD count=$BUNIT_SZ || error "write failure, but expect success"
+ $RUNDD count=$BUNIT_SZ || quota_error a $TSTUSR "write failure, but expect success"
echo " Done"
# cleanup
rm -f $TESTFILE
+ sync; sleep 3; sync;
}
# block soft limit (start timer, timer goes off, stop timer)
test_3() {
+ mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- LIMIT=$(( $BUNIT_SZ * 2 )) # 1 bunit on mds and 1 bunit on the ost
+ # 1 bunit on mds and 1 bunit on every ost
+ LIMIT=$(( $BUNIT_SZ * ($OSTCOUNT + 1) ))
GRACE=10
echo " User quota (soft limit: $LIMIT kbytes grace: $GRACE seconds)"
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
- $LFS setquota -t -u $GRACE $MAX_IQ_TIME $DIR
- $LFS setquota -u $TSTUSR $LIMIT 0 0 0 $DIR
+ $LFS setquota -t -u --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -u $TSTUSR -b $LIMIT -B 0 -i 0 -I 0 $DIR
test_block_soft $TESTFILE $GRACE
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
echo " Group quota (soft limit: $LIMIT kbytes grace: $GRACE seconds)"
TESTFILE=$DIR/$tdir/$tfile-1
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
- $LFS setquota -t -g $GRACE $MAX_IQ_TIME $DIR
- $LFS setquota -g $TSTUSR $LIMIT 0 0 0 $DIR
+ $LFS setquota -t -g --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -g $TSTUSR -b $LIMIT -B 0 -i 0 -I 0 $DIR
test_block_soft $TESTFILE $GRACE
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ resetquota -g $TSTUSR
}
-run_test 3 "Block soft limit (start timer, timer goes off, stop timer) ==="
+run_test_with_stat 3 "Block soft limit (start timer, timer goes off, stop timer) ==="
test_file_soft() {
TESTFILE=$1
LIMIT=$2
TIMER=$(($3 * 3 / 2))
+ wait_delete_completed
+
echo " Create files to exceed soft limit"
$RUNAS createmany -m ${TESTFILE}_ $((LIMIT + 1)) || \
- error "create failure, but expect success"
+ quota_error a $TSTUSR "create failure, but expect success"
sync; sleep 1; sync
echo " Done"
echo " Create file before timer goes off"
$RUNAS touch ${TESTFILE}_before || \
- error "failed create before timer expired, but expect success"
+ quota_error a $TSTUSR "failed create before timer expired, but expect success"
sync; sleep 1; sync
echo " Done"
echo " Sleep $TIMER seconds ..."
sleep $TIMER
-
+
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
-
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
+
echo " Create file after timer goes off"
- $RUNAS createmany -m ${TESTFILE}_after_ $((IUNIT_SZ - 2)) || \
- error "create ${TESTFILE}_after failure, but expect success"
+ # the least of inode qunit is 2, so there are at most 3(qunit:2+qtune:1)
+ # inode quota left here
+ $RUNAS touch ${TESTFILE}_after ${TESTFILE}_after1 ${TESTFILE}_after2 || true
sync; sleep 1; sync
- $RUNAS touch ${TESTFILE}_after && \
- error "create after timer expired, but expect EDQUOT"
+ $RUNAS touch ${TESTFILE}_after3 && \
+ quota_error a $TSTUSR "create after timer expired, but expect EDQUOT"
sync; sleep 1; sync
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- $SHOW_QUOTA_INFO
-
+ $SHOW_QUOTA_INFO_USER
+ $SHOW_QUOTA_INFO_GROUP
+
echo " Unlink files to stop timer"
find `dirname $TESTFILE` -name "`basename ${TESTFILE}`*" | xargs rm -f
echo " Done"
echo " Create file"
$RUNAS touch ${TESTFILE}_xxx || \
- error "touch after timer stop failure, but expect success"
+ quota_error a $TSTUSR "touch after timer stop failure, but expect success"
sync; sleep 1; sync
echo " Done"
# cleanup
rm -f ${TESTFILE}_xxx
+ sync; sleep 3; sync;
}
# file soft limit (start timer, timer goes off, stop timer)
-test_4() {
+test_4a() { # was test_4
+ mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
LIMIT=$(($IUNIT_SZ * 10)) # 10 iunits on mds
TESTFILE=$DIR/$tdir/$tfile-0
GRACE=5
echo " User quota (soft limit: $LIMIT files grace: $GRACE seconds)"
- $LFS setquota -t -u $MAX_DQ_TIME $GRACE $DIR
- $LFS setquota -u $TSTUSR 0 0 $LIMIT 0 $DIR
- $SHOW_QUOTA_USER
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $GRACE $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR
+ quota_show_check f u $TSTUSR
test_file_soft $TESTFILE $LIMIT $GRACE
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
echo " Group quota (soft limit: $LIMIT files grace: $GRACE seconds)"
- $LFS setquota -t -g $MAX_DQ_TIME $GRACE $DIR
- $LFS setquota -g $TSTUSR 0 0 $LIMIT 0 $DIR
- $SHOW_QUOTA_GROUP
+ $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $GRACE $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B 0 -i $LIMIT -I 0 $DIR
+ quota_show_check f g $TSTUSR
TESTFILE=$DIR/$tdir/$tfile-1
test_file_soft $TESTFILE $LIMIT $GRACE
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ resetquota -g $TSTUSR
# cleanup
- $LFS setquota -t -u $MAX_DQ_TIME $MAX_IQ_TIME $DIR
- $LFS setquota -t -g $MAX_DQ_TIME $MAX_IQ_TIME $DIR
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
}
-run_test 4 "File soft limit (start timer, timer goes off, stop timer) ==="
+run_test_with_stat 4a "File soft limit (start timer, timer goes off, stop timer) ==="
-test_4a() {
+test_4b() { # was test_4a
GR_STR1="1w3d"
GR_STR2="1000s"
GR_STR3="5s"
GR_STR5="5c"
GR_STR6="1111111111111111"
+ wait_delete_completed
+
# test of valid grace strings handling
echo " Valid grace strings test"
- $LFS setquota -t -u $GR_STR1 $GR_STR2 $DIR
+ $LFS setquota -t -u --block-grace $GR_STR1 --inode-grace $GR_STR2 $DIR
$LFS quota -u -t $DIR | grep "Block grace time: $GR_STR1"
- $LFS setquota -t -g $GR_STR3 $GR_STR4 $DIR
+ $LFS setquota -t -g --block-grace $GR_STR3 --inode-grace $GR_STR4 $DIR
$LFS quota -g -t $DIR | grep "Inode grace time: $GR_STR4"
# test of invalid grace strings handling
echo " Invalid grace strings test"
- ! $LFS setquota -t -u $GR_STR4 $GR_STR5 $DIR
- ! $LFS setquota -t -g $GR_STR4 $GR_STR6 $DIR
+ ! $LFS setquota -t -u --block-grace $GR_STR4 --inode-grace $GR_STR5 $DIR
+ ! $LFS setquota -t -g --block-grace $GR_STR4 --inode-grace $GR_STR6 $DIR
# cleanup
- $LFS setquota -t -u $MAX_DQ_TIME $MAX_IQ_TIME $DIR
- $LFS setquota -t -g $MAX_DQ_TIME $MAX_IQ_TIME $DIR
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -t -g --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
}
-run_test 4a "Grace time strings handling ==="
+run_test_with_stat 4b "Grace time strings handling ==="
# chown & chgrp (chown & chgrp successfully even out of block/file quota)
test_5() {
+ mkdir -p $DIR/$tdir
BLIMIT=$(( $BUNIT_SZ * $((OSTCOUNT + 1)) * 10)) # 10 bunits on each server
ILIMIT=$(( $IUNIT_SZ * 10 )) # 10 iunits on mds
-
+
+ wait_delete_completed
+
echo " Set quota limit (0 $BLIMIT 0 $ILIMIT) for $TSTUSR.$TSTUSR"
- $LFS setquota -u $TSTUSR 0 $BLIMIT 0 $ILIMIT $DIR
- $LFS setquota -g $TSTUSR 0 $BLIMIT 0 $ILIMIT $DIR
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
-
+ $LFS setquota -u $TSTUSR -b 0 -B $BLIMIT -i 0 -I $ILIMIT $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B $BLIMIT -i 0 -I $ILIMIT $DIR
+ quota_show_check a u $TSTUSR
+ quota_show_check a g $TSTUSR
+
echo " Create more than $ILIMIT files and more than $BLIMIT kbytes ..."
createmany -m $DIR/$tdir/$tfile-0_ $((ILIMIT + 1)) || \
error "touch failure, expect success"
echo " Chown files to $TSTUSR.$TSTUSR ..."
for i in `seq 0 $ILIMIT`; do
chown $TSTUSR.$TSTUSR $DIR/$tdir/$tfile-0_$i || \
- error "chown failure, but expect success"
+ quota_error a $TSTUSR "chown failure, but expect success"
done
# cleanup
unlinkmany $DIR/$tdir/$tfile-0_ $((ILIMIT + 1))
+ sync; sleep 3; sync;
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
}
-run_test 5 "Chown & chgrp successfully even out of block/file quota ==="
+run_test_with_stat 5 "Chown & chgrp successfully even out of block/file quota ==="
# block quota acquire & release
test_6() {
if [ $OSTCOUNT -lt 2 ]; then
- skip "$OSTCOUNT < 2, too few osts"
+ skip_env "$OSTCOUNT < 2, too few osts"
return 0;
fi
+ wait_delete_completed
+
+ mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
LIMIT=$((BUNIT_SZ * (OSTCOUNT + 1) * 5)) # 5 bunits per server
FILEA="$DIR/$tdir/$tfile-0_a"
FILEB="$DIR/$tdir/$tfile-0_b"
-
+
echo " Set block limit $LIMIT kbytes to $TSTUSR.$TSTUSR"
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
- $LFS setquota -g $TSTUSR 0 $LIMIT 0 0 $DIR
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ quota_show_check b u $TSTUSR
+ quota_show_check b g $TSTUSR
echo " Create filea on OST0 and fileb on OST1"
$LFS setstripe $FILEA -i 0 -c 1
chown $TSTUSR.$TSTUSR $FILEB
echo " Exceed quota limit ..."
- RUNDD="$RUNAS dd if=/dev/zero of=$FILEB bs=$BLK_SZ"
+ RUNDD="$RUNAS dd if=/dev/zero of=$FILEA bs=$BLK_SZ"
$RUNDD count=$((LIMIT - BUNIT_SZ * OSTCOUNT)) || \
- error "write fileb failure, but expect success"
+ quota_error a $TSTUSR "write filea failure, but expect success"
- sync; sleep 1; sync;
+ cancel_lru_locks osc
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
$RUNDD seek=$LIMIT count=$((BUNIT_SZ * OSTCOUNT)) && \
- error "write fileb success, but expect EDQUOT"
- sync; sleep 1; sync;
- echo " Write to OST0 return EDQUOT"
+ quota_error a $TSTUSR "write filea success, but expect EDQUOT"
+ cancel_lru_locks osc
+ echo " Write to OST1 return EDQUOT"
# this write maybe cache write, ignore it's failure
- RUNDD="$RUNAS dd if=/dev/zero of=$FILEA bs=$BLK_SZ"
+ RUNDD="$RUNAS dd if=/dev/zero of=$FILEB bs=$BLK_SZ"
$RUNDD count=$(($BUNIT_SZ * 2)) || true
- sync; sleep 1; sync;
+ cancel_lru_locks osc
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
$RUNDD count=$((BUNIT_SZ * 2)) seek=$((BUNIT_SZ *2)) && \
- error "write filea success, but expect EDQUOT"
+ quota_error a $TSTUSR "write fileb success, but expect EDQUOT"
- echo " Remove fileb to let OST1 release quota"
- rm -f $FILEB
- sync; sleep 10; sync; # need to allow journal commit for small fs
+ echo " Remove filea to let OST0 release quota"
+ rm -f $FILEA
+
+ if at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+ count=$((timeout / 5))
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+
+ while [ $((count--)) -gt 0 ]; do
+ sync && sleep 5
+
+ OST0_QUOTA_HOLD=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`
+ if [ -z $OST0_QUOTA_HOLD ]; then
+ error "System is error when query quota for block (U:$TSTUSR)."
+ else
+ [ $OST0_QUOTA_HOLD -gt $BUNIT_SZ ] && continue
+ fi
+
+ break
+ done
+
+ [ ! $count -gt 0 ] && error "Release quota for block timeout (U:$TSTUSR)."
+ $SHOW_QUOTA_USER
- echo " Write to OST0"
+ while [ $((count--)) -gt 0 ]; do
+ sync && sleep 5
+
+ OST0_QUOTA_HOLD=`$LFS quota -o $OST0_UUID -g $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`
+ if [ -z $OST0_QUOTA_HOLD ]; then
+ error "System is error when query quota for block (G:$TSTUSR)."
+ else
+ [ $OST0_QUOTA_HOLD -gt $BUNIT_SZ ] && continue
+ fi
+
+ break
+ done
+
+ [ ! $count -gt 0 ] && error "Release quota for block timeout (G:$TSTUSR)."
+ $SHOW_QUOTA_GROUP
+
+ echo " Write to OST1"
$RUNDD count=$((LIMIT - BUNIT_SZ * OSTCOUNT)) || \
- error "write filea failure, expect success"
+ quota_error a $TSTUSR "write fileb failure, expect success"
echo " Done"
# cleanup
- rm -f $FILEA
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
- $LFS setquota -g $TSTUSR 0 0 0 0 $DIR
+ rm -f $FILEB
+ sync; sleep 3; sync;
+
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
return 0
}
-run_test 6 "Block quota acquire & release ========="
+run_test_with_stat 6 "Block quota acquire & release ========="
# quota recovery (block quota only by now)
test_7()
{
+ mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- remote_mds && skip "remote mds" && return 0
- LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 10)) # 10 bunits each sever
+ wait_delete_completed
+
+ LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) ))
TESTFILE="$DIR/$tdir/$tfile-0"
-
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
-
+
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+
$LFS setstripe $TESTFILE -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
echo " Write to OST0..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ || \
- error "write failure, but expect success"
-
+ quota_error u $TSTUSR "write failure, but expect success"
+
#define OBD_FAIL_OBD_DQACQ 0x604
- echo 0x604 > /proc/sys/lustre/fail_loc
+ lustre_fail mds 0x604
echo " Remove files on OST0"
rm -f $TESTFILE
- echo 0 > /proc/sys/lustre/fail_loc
+ lustre_fail mds 0
echo " Trigger recovery..."
OSC0_UUID="`$LCTL dl | awk '$3 ~ /osc/ { print $1 }'`"
# check limits
PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
- TOTAL_LIMIT="`$LFS quota -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ TOTAL_LIMIT="`$LFS quota -v -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
[ $TOTAL_LIMIT -eq $LIMIT ] || error "total limits not recovery!"
echo " total limits = $TOTAL_LIMIT"
-
+
OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
[ -z "$OST0_UUID" ] && OST0_UUID=`do_facet ost1 "$LCTL dl | grep -m1 obdfilter" | awk '{print $((NF-1))}'`
OST0_LIMIT="`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $3 }'`"
echo " limits on $OST0_UUID = $OST0_LIMIT"
# cleanup
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR
+ resetquota -u $TSTUSR
}
-run_test 7 "Quota recovery (only block limit) ======"
+run_test_with_stat 7 "Quota recovery (only block limit) ======"
# run dbench with quota enabled
test_8() {
+ mkdir -p $DIR/$tdir
BLK_LIMIT=$((100 * 1024 * 1024)) # 100G
FILE_LIMIT=1000000
- DBENCH_LIB=${DBENCH_LIB:-/usr/lib/dbench}
-
- [ ! -d $DBENCH_LIB ] && skip "dbench not installed" && return 0
-
+
+ wait_delete_completed
+
echo " Set enough high limit for user: $TSTUSR"
- $LFS setquota -u $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
echo " Set enough high limit for group: $TSTUSR"
- $LFS setquota -g $USER 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
-
-
- TGT=$DIR/$tdir/client.txt
- SRC=${SRC:-$DBENCH_LIB/client.txt}
- [ ! -e $TGT -a -e $SRC ] && echo "copying $SRC to $TGT" && cp $SRC $TGT
- SRC=$DBENCH_LIB/client_plain.txt
- [ ! -e $TGT -a -e $SRC ] && echo "copying $SRC to $TGT" && cp $SRC $TGT
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
chmod 0777 $DIR/$tdir
- SAVE_PWD=$PWD
- cd $DIR/$tdir
- $RUNAS dbench -c client.txt 3
- RC=$?
-
- rm -f client.txt
- cd $SAVE_PWD
- return $RC
+ local duration=""
+ [ "$SLOW" = "no" ] && duration=" -t 120"
+ $RUNAS bash rundbench -D $DIR/$tdir 3 $duration || quota_error a $TSTUSR "dbench failed!"
+
+ rm -rf $DIR/$tdir
+ sync; sleep 3; sync;
+
+ return 0
}
-run_test 8 "Run dbench with quota enabled ==========="
+run_test_with_stat 8 "Run dbench with quota enabled ==========="
# run for fixing bug10707, it needs a big room. test for 64bit
KB=1024
GB=$((KB * 1024 * 1024))
-FSIZE=$((OSTCOUNT * 9 / 2))
# Use this as dd bs to decrease time
# inode->i_blkbits = min(PTLRPC_MAX_BRW_BITS+1, LL_MAX_BLKSIZE_BITS);
blksize=$((1 << 21)) # 2Mb
+size_file=$((GB * 9 / 2))
+# this check is just for test9 and test10
+OST0_MIN=4900000 #4.67G
+check_whether_skip () {
+ OST0_SIZE=`$LFS df $DIR | awk '/\[OST:0\]/ {print $4}'`
+ log "OST0_SIZE: $OST0_SIZE required: $OST0_MIN"
+ if [ $OST0_SIZE -lt $OST0_MIN ]; then
+ echo "WARN: OST0 has less than $OST0_MIN free, skip this test."
+ return 0
+ else
+ return 1
+ fi
+}
test_9() {
- chmod 0777 $DIR/$tdir
- lustrefs_size=`(echo 0; df -t lustre -P | awk '{print $4}') | tail -n 1`
- size_file=$((FSIZE * GB))
- echo "lustrefs_size:$lustrefs_size size_file:$((size_file / KB))"
- if [ $((lustrefs_size * KB)) -lt $size_file ]; then
- skip "less than $size_file bytes free"
- return 0;
- fi
+ check_whether_skip && return 0
- set_blk_unitsz $((1024 * 100))
- set_blk_tunesz $((1024 * 50))
+ wait_delete_completed
- # set the D_QUOTA flag
- debugsave
- sysctl -w lnet.debug="+quota"
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
TESTFILE="$DIR/$tdir/$tfile-0"
BLK_LIMIT=$((100 * KB * KB)) # 100G
FILE_LIMIT=1000000
+ echo " Set block limit $BLK_LIMIT kbytes to $TSTUSR.$TSTUSR"
- echo " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
- $LFS setquota -u $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
- echo " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
- $LFS setquota -g $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+
+ quota_show_check a u $TSTUSR
+ quota_show_check a g $TSTUSR
echo " Set stripe"
- [ $OSTCOUNT -ge 2 ] && $LFS setstripe $TESTFILE -c $OSTCOUNT
+ $LFS setstripe $TESTFILE -c 1
touch $TESTFILE
chown $TSTUSR.$TSTUSR $TESTFILE
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
-
- echo " Write the big file of $FSIZE G ..."
+ log " Write the big file of 4.5G ..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
- error "(usr) write $FSIZE G file failure, but expect success"
+ quota_error a $TSTUSR "(usr) write 4.5G file failure, but expect success"
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- echo " delete the big file of $FSIZE G..."
+ log " delete the big file of 4.5G..."
$RUNAS rm -f $TESTFILE
+ sync; sleep 3; sync;
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- echo " write the big file of 2 G..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((2 * GB / blksize)) || \
- error "(usr) write 2 G file failure, but expect seccess"
-
- echo " delete the big file of 2 G..."
- $RUNAS rm -f $TESTFILE
RC=$?
- set_blk_tunesz $BTUNE_SZ
- set_blk_unitsz $BUNIT_SZ
-
- debugrestore
- wait_delete_completed
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
return $RC
}
-run_test 9 "run for fixing bug10707(64bit) ==========="
+run_test_with_stat 9 "run for fixing bug10707(64bit) ==========="
# run for fixing bug10707, it need a big room. test for 32bit
+# 2.0 version does not support 32 bit qd_count, so such test is obsolete.
test_10() {
+ mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
- lustrefs_size=`(echo 0; df -t lustre -P | awk '{print $4}') | tail -n 1`
- size_file=$((FSIZE * GB))
- echo "lustrefs_size:$lustrefs_size size_file:$((size_file / KB))"
- if [ $((lustrefs_size * KB)) -lt $size_file ]; then
- skip "less than $size_file bytes free"
- return 0;
- fi
+ check_whether_skip && return 0
- sync; sleep 10; sync;
+ wait_delete_completed
- set_blk_unitsz $((1024 * 100))
- set_blk_tunesz $((1024 * 50))
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
- # set the D_QUOTA flag
- debugsave
- sysctl -w lnet.debug="+quota"
-
# make qd_count 32 bit
- sysctl -w lustre.fail_loc=0xA00
+ lustre_fail mds_ost 0xA00
TESTFILE="$DIR/$tdir/$tfile-0"
BLK_LIMIT=$((100 * KB * KB)) # 100G
FILE_LIMIT=1000000
- echo " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
- $LFS setquota -u $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
- echo " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
- $LFS setquota -g $TSTUSR 0 $BLK_LIMIT 0 $FILE_LIMIT $DIR
-
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $DIR
+
+ quota_show_check a u $TSTUSR
+ quota_show_check a g $TSTUSR
+
echo " Set stripe"
- [ $OSTCOUNT -ge 2 ] && $LFS setstripe $TESTFILE -c $OSTCOUNT
+ $LFS setstripe $TESTFILE -c 1
touch $TESTFILE
chown $TSTUSR.$TSTUSR $TESTFILE
- $SHOW_QUOTA_USER
- $SHOW_QUOTA_GROUP
-
- echo " Write the big file of $FSIZE G ..."
+ log " Write the big file of 4.5 G ..."
$RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((size_file / blksize)) || \
- error "(usr) write $FSIZE G file failure, but expect success"
-
+ quota_error a $TSTUSR "(usr) write 4.5 G file failure, but expect success"
+
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- echo " delete the big file of $FSIZE G..."
- $RUNAS rm -f $TESTFILE
+ log " delete the big file of 4.5 G..."
+ $RUNAS rm -f $TESTFILE
+ sync; sleep 3; sync;
$SHOW_QUOTA_USER
$SHOW_QUOTA_GROUP
- echo " write the big file of 2 G..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$blksize count=$((2 * GB / blkzise)) || \
- error "(usr) write 2 G file failure, but expect success"
-
- echo " delete the big file of 2 G..."
- $RUNAS rm -f $TESTFILE
-
RC=$?
- # clear the flage
- debugrestore
-
# make qd_count 64 bit
- sysctl -w lustre.fail_loc=0
+ lustre_fail mds_ost 0
- set_blk_tunesz $BTUNE_SZ
- set_blk_unitsz $BUNIT_SZ
-
- wait_delete_completed
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
return $RC
}
-run_test 10 "run for fixing bug10707(32bit) ==========="
-
-test_11() {
- #prepare the test
- block_limit=`(echo 0; df -t lustre -P | awk '{print $(NF - 4)}') | tail -n 1`
- echo $block_limit
- orig_dbr=`cat /proc/sys/vm/dirty_background_ratio`
- orig_dec=`cat /proc/sys/vm/dirty_expire_centisecs`
- orig_dr=`cat /proc/sys/vm/dirty_ratio`
- orig_dwc=`cat /proc/sys/vm/dirty_writeback_centisecs`
- echo 1 > /proc/sys/vm/dirty_background_ratio
- echo 30 > /proc/sys/vm/dirty_expire_centisecs
- echo 1 > /proc/sys/vm/dirty_ratio
- echo 50 > /proc/sys/vm/dirty_writeback_centisecs
- TESTDIR="$DIR/$tdir"
- local RV=0
-
- #do the test
- MINS=0
- REPS=3
- i=1
- while [ $i -le $REPS ]; do
- echo "test: cycle($i of $REPS) start at $(date)"
- mkdir -p $DIR/$tdir && chmod 777 $DIR/$tdir
- echo -n " create a file for uid "
- for j in `seq 1 30`; do
- echo -n "$j "
- # 30MB per dd for a total of 900MB (if space even permits)
- runas -u $j dd if=/dev/zero of=$DIR/$tdir/$tfile bs=$blksize count=15 > /dev/null 2>&1 &
- done
- echo ""
- PROCS=$(ps -ef | grep -v grep | grep "dd if /dev/zero of $TESTDIR" | wc -l)
- LAST_USED=0
- while [ $PROCS -gt 0 ]; do
- sleep 60
- MINS=$(($MINS+1))
- PROCS=$(ps -ef | grep -v grep | grep "dd if /dev/zero of $TESTDIR" | wc -l)
- USED=$(du -s $DIR/$tdir | awk '{print $1}')
- PCT=$(($USED * 100 / $block_limit))
- echo "${i}/${REPS} ${PCT}% p${PROCS} t${MINS} "
- if [ $USED -le $LAST_USED ]; then
- kill -9 $(ps -ef | grep "dd if /dev/zero of $DIR/$tdir" | grep -v grep | awk '{ print $2 }')
- i=$REPS
- RV=2
- break
- fi
- LAST_USED=$USED
- done
- echo " removing the test files..."
- rm -rf $DIR/$tdir/$tfile-0
- echo "cycle $i done at $(date)"
- i=$[$i+1]
- done
- echo "Test took $MINS minutes"
-
- #clean
- echo $orig_dbr > /proc/sys/vm/dirty_background_ratio
- echo $orig_dec > /proc/sys/vm/dirty_expire_centisecs
- echo $orig_dr > /proc/sys/vm/dirty_ratio
- echo $orig_dwc > /proc/sys/vm/dirty_writeback_centisecs
- if [ $RV -ne 0 ]; then
- error "Nothing was written for over a minute... aborting"
- fi
- return $RV
-}
-run_test 11 "run for fixing bug10912 ==========="
-
+#run_test_with_stat 10 "run for fixing bug10707(32bit) ==========="
# test a deadlock between quota and journal b=11693
test_12() {
+ mkdir -p $DIR/$tdir
chmod 0777 $DIR/$tdir
[ "$(grep $DIR2 /proc/mounts)" ] || mount_client $DIR2 || \
- { skip "Need lustre mounted on $MOUNT2 " && retutn 0; }
+ { skip_env "Need lustre mounted on $MOUNT2 " && retutn 0; }
LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 10)) # 10 bunits each sever
TESTFILE="$DIR/$tdir/$tfile-0"
TESTFILE2="$DIR2/$tdir/$tfile-1"
-
+
+ wait_delete_completed
+
echo " User quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
- $LFS setstripe $TESTFILE -i 0 -c 1
+ $LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
$LFS setstripe $TESTFILE2 -i 0 -c 1
chown $TSTUSR2.$TSTUSR2 $TESTFILE2
#define OBD_FAIL_OST_HOLD_WRITE_RPC 0x21f
- sysctl -w lustre.fail_loc=0x0000021f
+ #define OBD_FAIL_SOME 0x10000000 /* fail N times */
+ lustre_fail ost $((0x0000021f | 0x10000000)) 1
echo " step1: write out of block quota ..."
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT*2)) &
- DDPID=$!
- sleep 5
- $RUNAS2 dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=102400 &
+ $RUNAS2 dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=102400 &
DDPID1=$!
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(($LIMIT*2)) &
+ DDPID=$!
echo " step2: testing ......"
- count=0
- while [ true ]; do
- if [ -z `ps -ef | awk '$2 == '${DDPID1}' { print $8 }'` ]; then break; fi
- count=$[count+1]
- if [ $count -gt 64 ]; then
- sysctl -w lustre.fail_loc=0
- error "dd should be finished!"
+ local last_size=$(stat -c %s $TESTFILE2)
+ local stall_secs=0
+ local start_secs=$SECONDS
+ while [ -d /proc/${DDPID1} ]; do
+ local size=$(stat -c %s $TESTFILE2)
+ if [ $size -eq $last_size ]; then
+ stall_secs=$[stall_secs+1]
+ else
+ stall_secs=0
+ fi
+ if [ $stall_secs -gt 30 ]; then
+ lustre_fail ost 0
+ quota_error u $TSTUSR2 "giving up: dd stalled (i.e. made no progress) for 30 seconds!"
fi
+ last_size=$size
sleep 1
- done
- echo "(dd_pid=$DDPID1, time=$count)successful"
+ done
+ echo "(dd_pid=$DDPID1, time=$((SECONDS-start_secs)))successful"
#Recover fail_loc and dd will finish soon
- sysctl -w lustre.fail_loc=0
+ lustre_fail ost 0
echo " step3: testing ......"
count=0
while [ true ]; do
- if [ -z `ps -ef | awk '$2 == '${DDPID}' { print $8 }'` ]; then break; fi
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
count=$[count+1]
- if [ $count -gt 100 ]; then
- error "dd should be finished!"
+ if [ $count -gt 150 ]; then
+ quota_error u $TSTUSR "dd should be finished!"
fi
sleep 1
- done
+ done
echo "(dd_pid=$DDPID, time=$count)successful"
rm -f $TESTFILE $TESTFILE2
-
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR # clear user limit
+ sync; sleep 3; sync;
+
+ resetquota -u $TSTUSR
}
-run_test 12 "test a deadlock between quota and journal ==="
+run_test_with_stat 12 "test a deadlock between quota and journal ==="
# test multiple clients write block quota b=11693
test_13() {
+ mkdir -p $DIR/$tdir
+ wait_delete_completed
+
# one OST * 10 + (mds + other OSTs)
LIMIT=$((BUNIT_SZ * 10 + (BUNIT_SZ * OSTCOUNT)))
TESTFILE="$DIR/$tdir/$tfile"
-
+
echo " User quota (limit: $LIMIT kbytes)"
- $LFS setquota -u $TSTUSR 0 $LIMIT 0 0 $DIR
- $SHOW_QUOTA_USER
-
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ quota_show_check b u $TSTUSR
+
$LFS setstripe $TESTFILE -i 0 -c 1
chown $TSTUSR.$TSTUSR $TESTFILE
$LFS setstripe $TESTFILE.2 -i 0 -c 1
echo " step1: write out of block quota ..."
# one bunit will give mds
- $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$[($LIMIT - $BUNIT_SZ) / 2] &
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$[($LIMIT - $BUNIT_SZ) / 2] &
DDPID=$!
- $RUNAS dd if=/dev/zero of=$TESTFILE.2 bs=$BLK_SZ count=$[($LIMIT - $BUNIT_SZ) / 2] &
+ $RUNAS dd if=/dev/zero of=$TESTFILE.2 bs=$BLK_SZ count=$[($LIMIT - $BUNIT_SZ) / 2] &
DDPID1=$!
echo " step2: testing ......"
count=0
while [ true ]; do
- if [ -z `ps -ef | awk '$2 == '${DDPID}' { print $8 }'` ]; then break; fi
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
count=$[count+1]
if [ $count -gt 64 ]; then
- error "dd should be finished!"
+ quota_error u $TSTUSR "dd should be finished!"
fi
sleep 1
- done
+ done
echo "(dd_pid=$DDPID, time=$count)successful"
count=0
while [ true ]; do
- if [ -z `ps -ef | awk '$2 == '${DDPID1}' { print $8 }'` ]; then break; fi
+ if ! ps -p ${DDPID1} > /dev/null 2>&1 ; then break; fi
count=$[count+1]
if [ $count -gt 64 ]; then
- error "dd should be finished!"
+ quota_error u $TSTUSR "dd should be finished!"
fi
sleep 1
- done
+ done
echo "(dd_pid=$DDPID1, time=$count)successful"
sync; sleep 5; sync;
fz2=`stat -c %s $TESTFILE.2`
$SHOW_QUOTA_USER
[ $((fz + fz2)) -lt $((BUNIT_SZ * BLK_SZ * 10)) ] && \
- error "files too small $fz + $fz2 < $((BUNIT_SZ * BLK_SZ * 10))"
+ quota_error u $TSTUSR "files too small $fz + $fz2 < $((BUNIT_SZ * BLK_SZ * 10))"
rm -f $TESTFILE $TESTFILE.2
-
- $LFS setquota -u $TSTUSR 0 0 0 0 $DIR # clear user limit
+ sync; sleep 3; sync;
+
+ resetquota -u $TSTUSR
}
-run_test 13 "test multiple clients write block quota ==="
+run_test_with_stat 13 "test multiple clients write block quota ==="
check_if_quota_zero(){
- line=`$LFS quota -$1 $2 $DIR | wc -l`
+ line=`$LFS quota -v -$1 $2 $DIR | wc -l`
for i in `seq 3 $line`; do
if [ $i -eq 3 ]; then
field="3 4 6 7"
field="3 5"
fi
for j in $field; do
- tmp=`$LFS quota -$1 $2 $DIR | sed -n ${i}p |
+ tmp=`$LFS quota -v -$1 $2 $DIR | sed -n ${i}p |
awk '{print $'"$j"'}'`
- [ -n "$tmp" ] && [ $tmp -ne 0 ] && $LFS quota -$1 $2 $DIR && \
+ [ -n "$tmp" ] && [ $tmp -ne 0 ] && $LFS quota -v -$1 $2 $DIR && \
error "quota on $2 isn't clean"
done
done
echo "pass check_if_quota_zero"
}
-pre_test_14 () {
- # reboot the lustre
- cd $T_PWD; sh llmountcleanup.sh || error "llmountcleanup failed"
- sh llmount.sh
- pre_test
- run_test 0 "reboot lustre"
-}
+test_14a() { # was test_14 b=12223 -- setting quota on root
+ TESTFILE="$DIR/$tdir/$tfile"
-pre_test_14
+ # reboot the lustre
+ sync; sleep 5; sync
+ cleanup_and_setup_lustre
+ quota_init
-test_14(){ # b=12223 -- setting quota on root
- TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
# out of root's file and block quota
- $LFS setquota -u root 10 10 10 10 $DIR
+ $LFS setquota -u root -b 10 -B 10 -i 10 -I 10 $DIR
createmany -m ${TESTFILE} 20 || \
- error "unexpected: user(root) create files failly!"
+ quota_error u root "unexpected: user(root) create files failly!"
dd if=/dev/zero of=$TESTFILE bs=4k count=4096 || \
- error "unexpected: user(root) write files failly!"
+ quota_error u root "unexpected: user(root) write files failly!"
chmod 666 $TESTFILE
$RUNAS dd if=/dev/zero of=${TESTFILE} seek=4096 bs=4k count=4096 && \
- error "unexpected: user(quota_usr) write a file successfully!"
+ quota_error u root "unexpected: user(quota_usr) write a file successfully!"
# trigger the llog
chmod 777 $DIR
- for i in `seq 1 10`; do $RUNAS touch ${TESTFILE}a_$i; done
- for i in `seq 1 10`; do $RUNAS rm -f ${TESTFILE}a_$i; done
+ for i in `seq 1 10`; do $RUNAS touch ${TESTFILE}a_$i; done
+ for i in `seq 1 10`; do $RUNAS rm -f ${TESTFILE}a_$i; done
# do the check
- dmesg | tail | grep "\-122" |grep llog_obd_origin_add && error "err -122 not found in dmesg"
- $LFS setquota -u root 0 0 0 0 $DIR
+ dmesg | tail | grep "\-122" |grep llog_obd_origin_add && error "err -122 not found in dmesg"
+ resetquota -u root
#check_if_quota_zero u root
- # clean
+ # clean
unlinkmany ${TESTFILE} 15
rm -f $TESTFILE
+ sync; sleep 3; sync;
}
-run_test 14 "test setting quota on root ==="
+run_test_with_stat 14a "test setting quota on root ==="
-# turn off quota
-test_99()
-{
- $LFS quotaoff $DIR
- return 0
+test_15(){
+ LIMIT=$((24 * 1024 * 1024 * 1024 * 1024)) # 24 TB
+ PATTERN="`echo $DIR | sed 's/\//\\\\\//g'`"
+
+ wait_delete_completed
+
+ # test for user
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ TOTAL_LIMIT="`$LFS quota -v -u $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ [ $TOTAL_LIMIT -eq $LIMIT ] || error " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
+ echo " (user)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
+ resetquota -u $TSTUSR
+
+ # test for group
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ TOTAL_LIMIT="`$LFS quota -v -g $TSTUSR $DIR | awk '/^.*'$PATTERN'.*[[:digit:]+][[:space:]+]/ { print $4 }'`"
+ [ $TOTAL_LIMIT -eq $LIMIT ] || error " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, failed!"
+ echo " (group)total limits = $TOTAL_LIMIT; limit = $LIMIT, successful!"
+ resetquota -g $TSTUSR
+ $LFS quotaoff -ug $DIR
+ do_facet $SINGLEMDS "lctl set_param lquota.mdd_obd-${FSNAME}-MDT*.quota_type=ug" | grep "error writing" && \
+ error "fail to set version for $SINGLEMDS"
+ for j in `seq $OSTCOUNT`; do
+ do_facet ost$j "lctl set_param lquota.${FSNAME}-OST*.quota_type=ug" | grep "error writing" && \
+ error "fail to set version for ost$j"
+ done
+
+ echo "invalidating quota files"
+ $LFS quotainv -ug $DIR
+ $LFS quotainv -ugf $DIR
+ $LFS quotacheck -ug $DIR
+}
+run_test_with_stat 15 "set block quota more than 4T ==="
+
+# $1=u/g $2=with qunit adjust or not
+test_16_tub() {
+ LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 4))
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ wait_delete_completed
+
+ echo " User quota (limit: $LIMIT kbytes)"
+ if [ $1 == "u" ]; then
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ quota_show_check b u $TSTUSR
+ else
+ $LFS setquota -g $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ quota_show_check b g $TSTUSR
+ fi
+
+ $LFS setstripe $TESTFILE -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ echo " Write ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((BUNIT_SZ * 4)) || \
+ quota_error a $TSTUSR "(usr) write failure, but expect success"
+ echo " Done"
+ echo " Write out of block quota ..."
+ # this time maybe cache write, ignore it's failure
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) || true
+ # flush cache, ensure noquota flag is setted on client
+ cancel_lru_locks osc
+ if [ $2 -eq 1 ]; then
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) || \
+ quota_error a $TSTUSR "(write failure, but expect success"
+ else
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$BUNIT_SZ seek=$((BUNIT_SZ * 4)) && \
+ quota_error a $TSTUSR "(write success, but expect EDQUOT"
+ fi
+
+ rm -f $TESTFILE
+ sync; sleep 3; sync;
+ resetquota -$1 $TSTUSR
}
-run_test 99 "Quota off ==============================="
+# test without adjusting qunit
+# 2.0 version does not support WITHOUT_CHANGE_QS, so such test is obsolete
+test_16 () {
+ set_blk_tunesz $((BUNIT_SZ * 2))
+ set_blk_unitsz $((BUNIT_SZ * 4))
+ for i in u g; do
+ for j in 0 1; do
+ # define OBD_FAIL_QUOTA_WITHOUT_CHANGE_QS 0xA01
+ echo " grp/usr: $i, adjust qunit: $j"
+ echo "-------------------------------"
+ [ $j -eq 1 ] && lustre_fail mds_ost 0
+ [ $j -eq 0 ] && lustre_fail mds_ost 0xA01
+ test_16_tub $i $j
+ done
+ done
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+}
+#run_test_with_stat 16 "test without adjusting qunit"
+
+# run for fixing bug14526, failed returned quota reqs shouldn't ruin lustre.
+test_17() {
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ wait_delete_completed
+
+ #define OBD_FAIL_QUOTA_RET_QDATA | OBD_FAIL_ONCE
+ lustre_fail ost 0x80000A02
+
+ TESTFILE="$DIR/$tdir/$tfile-a"
+ TESTFILE2="$DIR/$tdir/$tfile-b"
+ mkdir -p $DIR/$tdir
+
+ BLK_LIMIT=$((100 * 1024)) # 100M
+
+ log " Set enough high limit(block:$BLK_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+ log " Set enough high limit(block:$BLK_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+
+ quota_show_check b u $TSTUSR
+ quota_show_check b g $TSTUSR
+
+ touch $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE
+ touch $TESTFILE2
+ chown $TSTUSR.$TSTUSR $TESTFILE2
+
+ log " Write the test file1 ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(( 10 * 1024 )) \
+ || quota_error a $TSTUSR "write 10M file failure"
+
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+
+ log " write the test file2 ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=$(( 10 * 1024 )) \
+ || quota_error a $TSTUSR "write 10M file failure"
+
+ $SHOW_QUOTA_USER
+ $SHOW_QUOTA_GROUP
+
+ rm -f $TESTFILE $TESTFILE2
+ RC=$?
+ sync; sleep 3; sync;
+
+ # make qd_count 64 bit
+ lustre_fail ost 0
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+
+ return $RC
+}
+run_test_with_stat 17 "run for fixing bug14526 ==========="
+
+# test when mds takes a long time to handle a quota req so that
+# the ost has dropped it, the ost still could work well b=14840
+test_18() {
+ LIMIT=$((100 * 1024 * 1024)) # 100G
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ wait_delete_completed
+
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ quota_show_check b u $TSTUSR
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ #define OBD_FAIL_MDS_BLOCK_QUOTA_REQ 0x13c
+ lustre_fail mds 0x13c
+
+ log " step1: write 100M block ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((1024 * 100)) &
+ DDPID=$!
+
+ sleep 5
+ lustre_fail mds 0
+
+ echo " step2: testing ......"
+ count=0
+ if at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+ while [ true ]; do
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
+ count=$[count+1]
+ if [ $count -gt $((4 * $timeout)) ]; then
+ quota_error u $TSTUSR "count=$count dd should be finished!"
+ fi
+ sleep 1
+ done
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+ sync
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+
+ testfile_size=$(stat -c %s $TESTFILE)
+ [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
+ quota_error u $TSTUSR "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
+ $SHOW_QUOTA_USER
+ rm -f $TESTFILE
+ sync
+
+ resetquota -u $TSTUSR
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+}
+run_test_with_stat 18 "run for fixing bug14840 ==========="
+
+# test when mds drops a quota req, the ost still could work well b=14840
+test_18a() {
+ LIMIT=$((100 * 1024 * 1024)) # 100G
+ TESTFILE="$DIR/$tdir/$tfile-a"
+ mkdir -p $DIR/$tdir
+
+ wait_delete_completed
+
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ quota_show_check b u $TSTUSR
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ #define OBD_FAIL_MDS_DROP_QUOTA_REQ | OBD_FAIL_ONCE 0x8000013d
+ lustre_fail mds 0x8000013d
+
+ log " step1: write 100M block ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$((1024 * 100)) &
+ DDPID=$!
+
+ echo " step2: testing ......"
+ count=0
+ if at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+ while [ true ]; do
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
+ count=$[count+1]
+ if [ $count -gt $((6 * $timeout)) ]; then
+ lustre_fail mds 0
+ quota_error u $TSTUSR "count=$count dd should be finished!"
+ fi
+ sleep 1
+ done
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+
+ lustre_fail mds 0
+ rm -f $TESTFILE
+ sync
+
+ resetquota -u $TSTUSR
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+}
+run_test_with_stat 18a "run for fixing bug14840 ==========="
+
+# test when mds do failover, the ost still could work well without trigger
+# watchdog b=14840
+test_18bc_sub() {
+ type=$1
+
+ LIMIT=$((110 * 1024 )) # 110M
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ wait_delete_completed
+
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ quota_show_check b u $TSTUSR
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ timeout=$(sysctl -n lustre.timeout)
+
+ if [ $type = "directio" ]; then
+ log " write 100M block(directio) ..."
+ $RUNAS $DIRECTIO write $TESTFILE 0 100 $((BLK_SZ * 1024)) &
+ else
+ log " write 100M block(normal) ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$((BLK_SZ * 1024)) count=100 &
+ fi
+
+ DDPID=$!
+ do_facet $SINGLEMDS "$LCTL conf_param ${FSNAME}-MDT*.mdd.quota_type=ug"
+
+ log "failing mds for $((2 * timeout)) seconds"
+ fail $SINGLEMDS $((2 * timeout))
+
+ # check if quotaon successful
+ $LFS quota -u $TSTUSR $MOUNT 2>&1 | grep -q "quotas are not enabled"
+ if [ $? -eq 0 ]; then
+ error "quotaon failed!"
+ rm -rf $TESTFILE
+ return
+ fi
+
+ count=0
+ if at_is_enabled; then
+ timeout=$(at_max_get mds)
+ else
+ timeout=$(lctl get_param -n timeout)
+ fi
+ while [ true ]; do
+ if ! ps -p ${DDPID} > /dev/null 2>&1; then break; fi
+ if [ $((++count % (2 * timeout) )) -eq 0 ]; then
+ log "it took $count second"
+ fi
+ sleep 1
+ done
+ log "(dd_pid=$DDPID, time=$count, timeout=$timeout)"
+ sync
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+
+ testfile_size=$(stat -c %s $TESTFILE)
+ [ $testfile_size -ne $((BLK_SZ * 1024 * 100)) ] && \
+ quota_error u $TSTUSR "expect $((BLK_SZ * 1024 * 100)), got ${testfile_size}. Verifying file failed!"
+ $SHOW_QUOTA_USER
+ rm -f $TESTFILE
+ sync
+
+ resetquota -u $TSTUSR
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+}
+
+# test when mds does failover, the ost still could work well
+# this test shouldn't trigger watchdog b=14840
+test_18b() {
+ test_18bc_sub normal
+ test_18bc_sub directio
+ # check if watchdog is triggered
+ do_facet ost1 dmesg > $TMP/lustre-log-${TESTNAME}.log
+ watchdog=`awk '/test 18b/ {start = 1;}
+ /Service thread pid/ && /was inactive/ {
+ if (start) {
+ print;
+ }
+ }' $TMP/lustre-log-${TESTNAME}.log`
+ [ `echo "$watchdog" | wc -l` -ge 3 ] && error "$watchdog"
+ rm -f $TMP/lustre-log-${TESTNAME}.log
+}
+run_test_with_stat 18b "run for fixing bug14840(mds failover, no watchdog) ==========="
+
+# test when mds does failover, the ost still could work well
+# this test will prevent OST_DISCONNET from happening b=14840
+test_18c() {
+ # define OBD_FAIL_OST_DISCONNECT_NET 0x202(disable ost_disconnect for osts)
+ lustre_fail ost 0x202
+ test_18bc_sub normal
+ test_18bc_sub directio
+ lustre_fail ost 0
+}
+run_test_with_stat 18c "run for fixing bug14840(mds failover, OST_DISCONNECT is disabled) ==========="
+
+run_to_block_limit() {
+ local LIMIT=$((($OSTCOUNT + 1) * $BUNIT_SZ))
+ local TESTFILE=$1
+ wait_delete_completed
+
+ # set 1 Mb quota unit size
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ # bind file to a single OST
+ $LFS setstripe -c 1 $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ echo " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ quota_show_check b u $TSTUSR
+ echo " Updating quota limits"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $MOUNT
+ quota_show_check b u $TSTUSR
+
+ RUNDD="$RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ"
+ $RUNDD count=$BUNIT_SZ || quota_error u $TSTUSR "(usr) write failure, but expect success"
+ # for now page cache of TESTFILE may still be dirty,
+ # let's push it to the corresponding OST, this will also
+ # cache NOQUOTA on the client from OST's reply
+ cancel_lru_locks osc
+ $RUNDD seek=$BUNIT_SZ && quota_error u $TSTUSR "(usr) write success, should be EDQUOT"
+}
+
+test_19() {
+ # 1 Mb bunit per each MDS/OSS
+ local TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ run_to_block_limit $TESTFILE
+ $SHOW_QUOTA_USER
+
+ # cleanup
+ rm -f $TESTFILE
+ resetquota -u $TSTUSR
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+
+}
+run_test_with_stat 19 "test if administrative limits updates do not zero operational limits (14790) ==="
+
+test_20()
+{
+ LSTR=(1t 2g 3m 4k) # limits strings
+ LVAL=($[1*1024*1024*1024] $[2*1024*1024] $[3*1024*1024] $[4*1024]) # limits values
+
+ $LFS setquota -u $TSTUSR --block-softlimit ${LSTR[0]} \
+ $MOUNT || error "could not set quota limits"
+
+ $LFS setquota -u $TSTUSR --block-hardlimit ${LSTR[1]} \
+ --inode-softlimit ${LSTR[2]} \
+ --inode-hardlimit ${LSTR[3]} \
+ $MOUNT || error "could not set quota limits"
+
+ ($LFS quota -v -u $TSTUSR $MOUNT | \
+ grep -E '^ *'$MOUNT' *[0-9]+\** *'${LVAL[0]}' *'${LVAL[1]}' *[0-9]+\** *'${LVAL[2]}' *'${LVAL[3]}) \
+ || error "lfs quota output is unexpected"
+
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 20 "test if setquota specifiers work properly (15754)"
+
+test_21_sub() {
+ local testfile=$1
+ local blk_number=$2
+ local seconds=$3
+
+ time=$(($(date +%s) + seconds))
+ while [ $(date +%s) -lt $time ]; do
+ $RUNAS dd if=/dev/zero of=$testfile bs=$BLK_SZ count=$blk_number > /dev/null 2>&1
+ rm -f $testfile
+ done
+}
+
+# run for fixing bug16053, setquota shouldn't fail when writing and
+# deleting are happening
+test_21() {
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ wait_delete_completed
+
+ TESTFILE="$DIR/$tdir/$tfile"
+
+ BLK_LIMIT=$((10 * 1024 * 1024)) # 10G
+ FILE_LIMIT=1000000
+
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for user: $TSTUSR"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $MOUNT
+ log " Set enough high limit(block:$BLK_LIMIT; file: $FILE_LIMIT) for group: $TSTUSR"
+ $LFS setquota -g $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I $FILE_LIMIT $MOUNT
+
+ # repeat writing on a 1M file
+ test_21_sub ${TESTFILE}_1 1024 30 &
+ DDPID1=$!
+ # repeat writing on a 128M file
+ test_21_sub ${TESTFILE}_2 $((1024 * 128)) 30 &
+ DDPID2=$!
+
+ time=$(($(date +%s) + 30))
+ i=1
+ while [ $(date +%s) -lt $time ]; do
+ log " Set quota for $i times"
+ $LFS setquota -u $TSTUSR -b 0 -B $((BLK_LIMIT + 1024 * i)) -i 0 -I $((FILE_LIMIT + i)) $MOUNT
+ $LFS setquota -g $TSTUSR -b 0 -B $((BLK_LIMIT + 1024 * i)) -i 0 -I $((FILE_LIMIT + i)) $MOUNT
+ i=$((i+1))
+ sleep 1
+ done
+
+ count=0
+ while [ true ]; do
+ if ! ps -p ${DDPID1} > /dev/null 2>&1; then break; fi
+ count=$[count+1]
+ if [ $count -gt 60 ]; then
+ quota_error a $TSTUSR "dd should be finished!"
+ fi
+ sleep 1
+ done
+ echo "(dd_pid=$DDPID1, time=$count)successful"
+
+ count=0
+ while [ true ]; do
+ if ! ps -p ${DDPID2} > /dev/null 2>&1; then break; fi
+ count=$[count+1]
+ if [ $count -gt 60 ]; then
+ quota_error a $TSTUSR "dd should be finished!"
+ fi
+ sleep 1
+ done
+ echo "(dd_pid=$DDPID2, time=$count)successful"
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+
+ return $RC
+}
+run_test_with_stat 21 "run for fixing bug16053 ==========="
+
+test_22() {
+ quota_save_version "ug3"
+
+ stopall
+ mount
+ setupall
+
+ echo "checking parameters"
+
+ do_facet $SINGLEMDS "lctl get_param mdd.${FSNAME}-MDT*.quota_type" | grep "ug3" || error "admin failure"
+ do_facet ost1 "lctl get_param obdfilter.*.quota_type" | grep "ug3" || error "op failure"
+
+ quota_init
+}
+run_test_with_stat 22 "test if quota_type saved as permanent parameter ===="
+
+test_23_sub() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ rm -f $TESTFILE
+ local bs_unit=$((1024*1024))
+ LIMIT=$1
+
+ wait_delete_completed
+
+ # test for user
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+ sleep 3
+ quota_show_check b u $TSTUSR
+
+ $LFS setstripe $TESTFILE -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ log " Step1: trigger quota with 0_DIRECT"
+ log " Write half of file"
+ $RUNAS $DIRECTIO write $TESTFILE 0 $(($LIMIT/1024/2)) $bs_unit || \
+ quota_error u $TSTUSR "(1) write failure, but expect success: $LIMIT"
+ log " Write out of block quota ..."
+ $RUNAS $DIRECTIO write $TESTFILE $(($LIMIT/1024/2)) $(($LIMIT/1024/2)) $bs_unit && \
+ quota_error u $TSTUSR "(2) write success, but expect EDQUOT: $LIMIT"
+ log " Step1: done"
+
+ log " Step2: rewrite should succeed"
+ $RUNAS $DIRECTIO write $TESTFILE 0 1 $bs_unit || \
+ quota_error u $TSTUSR "(3) write failure, but expect success: $LIMIT"
+ log " Step2: done"
+
+ rm -f $TESTFILE
+ wait_delete_completed
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+ OST0_QUOTA_USED=`$LFS quota -o $OST0_UUID -u $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ echo $OST0_QUOTA_USED
+ [ $OST0_QUOTA_USED -ne 0 ] && \
+ ($SHOW_QUOTA_USER; quota_error u $TSTUSR "quota deleted isn't released")
+ $SHOW_QUOTA_USER
+ resetquota -u $TSTUSR
+}
+
+test_23() {
+ log "run for $((OSTCOUNT * 4))MB test file"
+ test_23_sub $((OSTCOUNT * 4 * 1024))
+
+ OST0_MIN=120000
+ check_whether_skip && return 0
+ log "run for $((OSTCOUNT * 40))MB test file"
+ test_23_sub $((OSTCOUNT * 40 * 1024))
+}
+run_test_with_stat 23 "run for fixing bug16125 ==========="
+
+test_24() {
+ local TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ run_to_block_limit $TESTFILE
+ $SHOW_QUOTA_USER | grep '*' || error "no matching *"
+
+ # cleanup
+ rm -f $TESTFILE
+ resetquota -u $TSTUSR
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+
+}
+run_test_with_stat 24 "test if lfs draws an asterix when limit is reached (16646) ==========="
+
+show_quota() {
+ if [ $1 = "-u" ]; then
+ if [ $2 = "$TSTUSR" ]; then
+ $SHOW_QUOTA_USER
+ else
+ $SHOW_QUOTA_USER2
+ fi
+ else
+ if [ $2 = "$TSTUSR" ]; then
+ $SHOW_QUOTA_GROUP
+ else
+ $SHOW_QUOTA_GROUP2
+ fi
+ fi
+}
+
+test_25_sub() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ rm -f $TESTFILE
+ LIMIT=$(( $BUNIT_SZ * ($OSTCOUNT + 1) + 4096 ))
+
+ wait_delete_completed
+
+ # set quota for $TSTUSR
+ log "setquota for $TSTUSR"
+ $LFS setquota $1 $TSTUSR -b $LIMIT -B $LIMIT -i 10 -I 10 $DIR
+ sleep 3
+ if [ "$1" == "-u" ]; then
+ quota_show_check a u $TSTUSR
+ else
+ quota_show_check a g $TSTUSR
+ fi
+
+ # set quota for $TSTUSR2
+ log "setquota for $TSTUSR2"
+ $LFS setquota $1 $TSTUSR2 -b $LIMIT -B $LIMIT -i 10 -I 10 $DIR
+ sleep 3
+ if [ "$1" == "-u" ]; then
+ quota_show_check a u $TSTUSR2
+ else
+ quota_show_check a g $TSTUSR2
+ fi
+
+ # set stripe index to 0
+ log "setstripe for $DIR/$tdir to 0"
+ $LFS setstripe $DIR/$tdir -c 1 -i 0
+ MDS_UUID=`do_facet $SINGLEMDS $LCTL dl | grep -m1 " mdt " | awk '{print $((NF-1))}'`
+ OST0_UUID=`do_facet ost1 $LCTL dl | grep -m1 obdfilter | awk '{print $((NF-1))}'`
+ MDS_QUOTA_USED_OLD=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ OST0_QUOTA_USED_OLD=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ MDS_QUOTA_USED2_OLD=`$LFS quota -o $MDS_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ OST0_QUOTA_USED2_OLD=`$LFS quota -o $OST0_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+
+ # TSTUSR write 4M
+ log "$TSTUSR write 4M to $TESTFILE"
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=4K count=1K || quota_error a $TSTUSR "dd failed"
+ sync
+ show_quota $1 $TSTUSR
+ show_quota $1 $TSTUSR2
+ MDS_QUOTA_USED_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ [ $MDS_QUOTA_USED_NEW -ne $((MDS_QUOTA_USED_OLD + 1)) ] && \
+ quota_error a $TSTUSR "$TSTUSR inode quota usage error: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
+ OST0_QUOTA_USED_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ OST0_QUOTA_USED_DELTA=$((OST0_QUOTA_USED_NEW - OST0_QUOTA_USED_OLD))
+ [ $OST0_QUOTA_USED_DELTA -lt 4096 ] && \
+ quota_error a $TSTUSR "$TSTUSR block quota usage error: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
+
+ # chown/chgrp from $TSTUSR to $TSTUSR2
+ if [ $1 = "-u" ]; then
+ log "chown from $TSTUSR to $TSTUSR2"
+ chown $TSTUSR2 $TESTFILE || quota_error u $TSTUSR2 "chown failed"
+ else
+ log "chgrp from $TSTUSR to $TSTUSR2"
+ chgrp $TSTUSR2 $TESTFILE || quota_error g $TSTUSR2 "chgrp failed"
+ fi
+ sync
+ show_quota $1 $TSTUSR
+ show_quota $1 $TSTUSR2
+ MDS_QUOTA_USED2_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ [ $MDS_QUOTA_USED2_NEW -ne $((MDS_QUOTA_USED2_OLD + 1)) ] && \
+ quota_error a $TSTUSR2 "$TSTUSR2 inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED2_OLD|$MDS_QUOTA_USED2_NEW]"
+ OST0_QUOTA_USED2_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR2 $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ # when chown, the quota on ost could be displayed out of quota temporarily. Delete the '*' in this situation. b=20433
+ OST0_QUOTA_USED2_NEW=${OST0_QUOTA_USED2_NEW%\*}
+ OST0_QUOTA_USED2_DELTA=$((OST0_QUOTA_USED2_NEW - OST0_QUOTA_USED2_OLD))
+ [ $OST0_QUOTA_USED2_DELTA -ne $OST0_QUOTA_USED_DELTA ] && \
+ quota_error a $TSTUSR2 "$TSTUSR2 block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED2_OLD|$OST0_QUOTA_USED2_NEW]"
+ MDS_QUOTA_USED_NEW=`$LFS quota -o $MDS_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $4 }'`
+ [ $MDS_QUOTA_USED_NEW -ne $MDS_QUOTA_USED_OLD ] && \
+ quota_error a $TSTUSR "$TSTUSR inode quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$MDS_QUOTA_USED_OLD|$MDS_QUOTA_USED_NEW]"
+ OST0_QUOTA_USED_NEW=`$LFS quota -o $OST0_UUID $1 $TSTUSR $DIR | awk '/^.*[[:digit:]+][[:space:]+]/ { print $1 }'`
+ [ $OST0_QUOTA_USED_NEW -ne $OST0_QUOTA_USED_OLD ] && \
+ quota_error a $TSTUSR "$TSTUSR block quota usage transfer from $TSTUSR to $TSTUSR2 failed: [$OST0_QUOTA_USED_OLD|$OST0_QUOTA_USED_NEW]"
+
+ rm -f $TESTFILE
+ wait_delete_completed
+ resetquota $1 $TSTUSR
+ resetquota $1 $TSTUSR2
+}
+
+test_25() {
+ log "run for chown case"
+ test_25_sub -u
+
+ log "run for chgrp case"
+ test_25_sub -g
+}
+run_test_with_stat 25 "test whether quota usage is transfered when chown/chgrp (18081) ==========="
+
+test_26() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ TESTFILE2="$DIR/$tdir/$tfile-1"
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ wait_delete_completed
+
+ # every quota slave gets 20MB
+ b_limit=$(((OSTCOUNT + 1) * 20 * 1024))
+ log "limit: ${b_limit}KB"
+ $LFS setquota -u $TSTUSR -b 0 -B $b_limit -i 0 -I 0 $DIR
+ sleep 3
+ quota_show_check b u $TSTUSR
+
+ $LFS setstripe $TESTFILE -c 1 -i 0
+ $LFS setstripe $TESTFILE2 -c 1 -i 0
+ chown $TSTUSR.$TSTUSR $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE2
+
+ #define OBD_FAIL_QUOTA_DELAY_REL 0xA03
+ lustre_fail ost 0xA03
+
+ log " Write the first file..."
+ $RUNAS $DIRECTIO write $TESTFILE 0 10 $((BLK_SZ * 1024)) || quota_error u $TSTUSR "write failure, but expect success"
+ log " Delete the first file..."
+ rm -f $TESTFILE
+
+
+ wait_delete_completed
+
+ log " Write the second file..."
+ $RUNAS $DIRECTIO write $TESTFILE2 0 10 $((BLK_SZ * 1024)) || quota_error u $TSTUSR "write failure, but expect success"
+ log " Delete the second file..."
+ rm -f $TESTFILE2
+
+ lustre_fail ost 0
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 26 "test for false quota error(bz18491) ======================================"
+
+test_27a() {
+ $LFS quota $TSTUSR $DIR && error "lfs succeeded with no type, but should have failed"
+ $LFS setquota $TSTUSR $DIR && error "lfs succeeded with no type, but should have failed"
+ return 0
+}
+run_test_with_stat 27a "lfs quota/setquota should handle wrong arguments (19612) ================="
+
+test_27b() {
+ $LFS setquota -u $TSTID -b 1000 -B 1000 -i 1000 -I 1000 $DIR || \
+ error "lfs setquota failed with uid argument"
+ $LFS setquota -g $TSTID -b 1000 -B 1000 -i 1000 -I 1000 $DIR || \
+ error "lfs stequota failed with gid argument"
+ $SHOW_QUOTA_USERID || error "lfs quota failed with uid argument"
+ $SHOW_QUOTA_GROUPID || error "lfs quota failed with gid argument"
+ resetquota -u $TSTUSR
+ resetquota -g $TSTUSR
+ return 0
+}
+run_test 27b "lfs quota/setquota should handle user/group ID (20200) ================="
+
+test_28() {
+ BLK_LIMIT=$((100 * 1024 * 1024)) # 100G
+ echo "Step 1: set enough high limit for user [$TSTUSR:$BLK_LIMIT]"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+ $SHOW_QUOTA_USER
+
+ echo "Step 2: reset system ..."
+ cleanup_and_setup_lustre
+ quota_init
+
+ echo "Step 3: change qunit for user [$TSTUSR:512:1024]"
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ wait_delete_completed
+
+ #define OBD_FAIL_QUOTA_RET_QDATA | OBD_FAIL_ONCE
+ lustre_fail ost 0x80000A02
+
+ TESTFILE="$DIR/$tdir/$tfile"
+ mkdir -p $DIR/$tdir
+
+ BLK_LIMIT=$((100 * 1024)) # 100M
+ echo "Step 4: set enough high limit for user [$TSTUSR:$BLK_LIMIT]"
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR
+ $SHOW_QUOTA_USER
+
+ touch $TESTFILE
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ echo "Step 5: write the test file1 [10M] ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=$(( 10 * 1024 )) \
+ || quota_error a $TSTUSR "write 10M file failure"
+ $SHOW_QUOTA_USER
+
+ rm -f $TESTFILE
+ sync; sleep 3; sync;
+
+ # make qd_count 64 bit
+ lustre_fail ost 0
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 28 "test for consistency for qunit when setquota (18574) ==========="
+
+test_29()
+{
+ local BLK_LIMIT=$((100 * 1024 * 1024)) # 100G
+ local timeout
+ local pid
+
+ if at_is_enabled; then
+ timeout=$(at_max_get client)
+ at_max_set 10 client
+ else
+ timeout=$(lctl get_param -n timeout)
+ lctl set_param timeout=10
+ fi
+
+ #define OBD_FAIL_MDS_QUOTACTL_NET 0x12e
+ lustre_fail mds 0x12e
+
+ $LFS setquota -u $TSTUSR -b 0 -B $BLK_LIMIT -i 0 -I 0 $DIR & pid=$!
+
+ echo "sleeping for $((10 * 2)) seconds"
+ sleep $((10 * 2))
+ ps -p $pid && error "lfs hadn't finished by timeout"
+ wait $pid && error "succeeded, but should have failed"
+
+ lustre_fail mds 0
+
+ if at_is_enabled; then
+ at_max_set $timeout client
+ else
+ lctl set_param timeout=$timeout
+ fi
+
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 29 "unhandled quotactls must not hang lustre client (19778) ========"
+
+test_30()
+{
+ local output
+ local LIMIT=1024
+ local TESTFILE="$DIR/$tdir/$tfile"
+ local GRACE=10
+
+ set_blk_tunesz 512
+ set_blk_unitsz 1024
+
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+
+ $LFS setquota -t -u --block-grace $GRACE --inode-grace $MAX_IQ_TIME $DIR
+ $LFS setquota -u $TSTUSR -b $LIMIT -B 0 -i 0 -I 0 $DIR
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=1024 count=$((LIMIT * 2)) || true
+ cancel_lru_locks osc
+ sleep $GRACE
+ $LFS setquota -u $TSTUSR -B 0 $DIR
+ # over-quota flag has not yet settled since we do not trigger async events
+ # based on grace time period expiration
+ $SHOW_QUOTA_USER
+ $RUNAS dd if=/dev/zero of=$TESTFILE conv=notrunc oflag=append bs=1048576 count=1 || true
+ cancel_lru_locks osc
+ # now over-quota flag should be settled and further writes should fail
+ $SHOW_QUOTA_USER
+ $RUNAS dd if=/dev/zero of=$TESTFILE conv=notrunc oflag=append bs=1048576 count=1 && error "grace times were reset"
+ rm -f $TESTFILE
+ resetquota -u $TSTUSR
+ $LFS setquota -t -u --block-grace $MAX_DQ_TIME --inode-grace $MAX_IQ_TIME $DIR
+
+ set_blk_unitsz $((128 * 1024))
+ set_blk_tunesz $((128 * 1024 / 2))
+}
+run_test_with_stat 30 "hard limit updates should not reset grace times ================"
+
+# test duplicate quota releases b=18630
+test_31() {
+ mkdir -p $DIR/$tdir
+ chmod 0777 $DIR/$tdir
+
+ LIMIT=$(( $BUNIT_SZ * $(($OSTCOUNT + 1)) * 10)) # 10 bunits each sever
+ TESTFILE="$DIR/$tdir/$tfile-0"
+ TESTFILE2="$DIR/$tdir/$tfile-1"
+
+ wait_delete_completed
+
+ log " User quota (limit: $LIMIT kbytes)"
+ $LFS setquota -u $TSTUSR -b 0 -B $LIMIT -i 0 -I 0 $DIR
+
+ $LFS setstripe $TESTFILE -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE
+ $LFS setstripe $TESTFILE2 -i 0 -c 1
+ chown $TSTUSR.$TSTUSR $TESTFILE2
+
+ log " step1: write out of block quota ..."
+ $RUNAS dd if=/dev/zero of=$TESTFILE bs=$BLK_SZ count=5120
+ $RUNAS dd if=/dev/zero of=$TESTFILE2 bs=$BLK_SZ count=5120
+
+ #define OBD_FAIL_QUOTA_DELAY_SD 0xA04
+ #define OBD_FAIL_SOME 0x10000000 /* fail N times */
+ lustre_fail ost $((0x00000A04 | 0x10000000)) 1
+
+ log " step2: delete two files so that triggering duplicate quota release ..."
+ rm -f $TESTFILE $TESTFILE2
+ sync; sleep 5; sync # OBD_FAIL_QUOTA_DELAY_SD will delay for 5 seconds
+ wait_delete_completed
+
+ log " step3: verify if the ost failed"
+ do_facet ost1 dmesg > $TMP/lustre-log-${TESTNAME}.log
+ watchdog=`awk '/test 31/ {start = 1;}
+ /release quota error/ {
+ if (start) {
+ print;
+ }
+ }' $TMP/lustre-log-${TESTNAME}.log`
+ [ "$watchdog" ] && error "$watchdog"
+ rm -f $TMP/lustre-log-${TESTNAME}.log
+
+ lustre_fail ost 0
+ resetquota -u $TSTUSR
+}
+run_test_with_stat 31 "test duplicate quota releases ==="
+
+# turn off quota
+quota_fini()
+{
+ $LFS quotaoff $DIR
+ do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=-quota"
+}
+quota_fini
log "cleanup: ======================================================"
cd $ORIG_PWD
-post_test
check_and_cleanup_lustre
echo '=========================== finished ==============================='
+export QUOTA_AUTO=$QUOTA_AUTO_OLD
[ -f "$QUOTALOG" ] && cat $QUOTALOG && grep -q FAIL $QUOTALOG && exit 1 || true
echo "$0: completed"