ONLY=${ONLY:-"$*"}
-# bug number for skipped test: LU-2828
-ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 59 64"
+# bug number for skipped test:
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
is_sles11() # LU-2181
MDSSIZE=200000
OSTSIZE=200000
+fs2mds_HOST=$mds_HOST
+fs2ost_HOST=$ost_HOST
+fs3ost_HOST=$ost_HOST
+
+MDSDEV1_2=$fs2mds_DEV
+OSTDEV1_2=$fs2ost_DEV
+OSTDEV2_2=$fs3ost_DEV
+
if ! combined_mgs_mds; then
# bug number for skipped test: 23954
ALWAYS_EXCEPT="$ALWAYS_EXCEPT 24b"
fi
[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
-# bug number for skipped test: LU-2778 LU-4444
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 57b 69"
+# bug number for skipped test: LU-4444
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 69"
init_logging
}
umount_client() {
- local MOUNTPATH=$1
- echo "umount lustre on ${MOUNTPATH}....."
- zconf_umount $(hostname) $MOUNTPATH || return 97
+ local mountpath=$1
+ shift
+ echo "umount lustre on $mountpath....."
+ zconf_umount $HOSTNAME $mountpath $@ || return 97
}
manual_umount_client(){
local rc
local FORCE=$1
echo "manual umount lustre on ${MOUNT}...."
- do_facet client "umount -d ${FORCE} $MOUNT"
+ do_facet client "umount ${FORCE} $MOUNT"
rc=$?
return $rc
}
cleanup_nocli || return $?
}
+cleanup_fs2() {
+ trap 0
+ echo "umount $MOUNT2 ..."
+ umount $MOUNT2 || true
+ echo "stopping fs2mds ..."
+ stop fs2mds -f || true
+ echo "stopping fs2ost ..."
+ stop fs2ost -f || true
+}
+
check_mount() {
do_facet client "cp /etc/passwd $DIR/a" || return 71
do_facet client "rm $DIR/a" || return 72
run_test 1 "start up ost twice (should return errors)"
test_2() {
- start_mdt 1 || error "MDT0 start fail"
+ start_mds || error "MDT start failed"
echo "start mds second time.."
- start_mdt 1 && error "2nd MDT start should fail"
+ start_mds && error "2nd MDT start should fail"
start_ost || error "OST start failed"
mount_client $MOUNT || error "mount_client failed to start client"
check_mount || error "check_mount failed"
setup
touch $DIR/$tfile || error "touch $DIR/$tfile failed"
stop_ost || error "Unable to stop OST1"
- cleanup
+ umount_client $MOUNT -f || error “unmount $MOUNT failed”
+ cleanup_nocli
eno=$?
# ok for ost to fail shutdown
if [ 202 -ne $eno ] && [ 0 -ne $eno ]; then
# cleanup may return an error from the failed
# disconnects; for now I'll consider this successful
# if all the modules have unloaded.
- umount -d $MOUNT &
+ $UMOUNT -f $MOUNT &
UMOUNT_PID=$!
sleep 6
echo "killing umount"
start_mds || error "MDS start failed"
stop_ost || error "Unable to stop OST1"
mount_client $MOUNT || error "mount_client $MOUNT failed"
- cleanup || error "cleanup_nocli failed with $?"
+ umount_client $MOUNT -f || error "umount_client $MOUNT failed"
+ cleanup_nocli || error "cleanup_nocli failed with $?"
grep " $MOUNT " /etc/mtab &&
error "$MOUNT entry in mtab after unmount"
pass
}
run_test 21d "start mgs then ost and then mds"
+cleanup_21e() {
+ MGSNID="$saved_mgsnid"
+ cleanup_fs2
+ echo "stopping fs2mgs ..."
+ stop $fs2mgs -f || true
+}
+
+test_21e() { # LU-5863
+ if [[ -z "$fs3ost_DEV" || -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
+ is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
+ skip_env "mixed loopback and real device not working" && return
+ fi
+
+ local fs2mdsdev=$(mdsdevname 1_2)
+ local fs2ostdev=$(ostdevname 1_2)
+ local fs3ostdev=$(ostdevname 2_2)
+
+ local fs2mdsvdev=$(mdsvdevname 1_2)
+ local fs2ostvdev=$(ostvdevname 1_2)
+ local fs3ostvdev=$(ostvdevname 2_2)
+
+ # temporarily use fs3ost as fs2mgs
+ local fs2mgs=fs3ost
+ local fs2mgsdev=$fs3ostdev
+ local fs2mgsvdev=$fs3ostvdev
+
+ local fsname=test1234
+
+ add $fs2mgs $(mkfs_opts mgs $fs2mgsdev) --fsname=$fsname \
+ --reformat $fs2mgsdev $fs2mgsvdev || error "add fs2mgs failed"
+ start $fs2mgs $fs2mgsdev $MGS_MOUNT_OPTS && trap cleanup_21e EXIT INT ||
+ error "start fs2mgs failed"
+
+ local saved_mgsnid="$MGSNID"
+ MGSNID=$(do_facet $fs2mgs $LCTL list_nids | xargs | tr ' ' ,)
+
+ add fs2mds $(mkfs_opts mds1 $fs2mdsdev $fsname) \
+ --reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
+ add fs2ost $(mkfs_opts ost1 $fs2ostdev $fsname) \
+ --reformat $fs2ostdev $fs2ostvdev || error "add fs2ost failed"
+
+ start fs2ost $fs2ostdev $OST_MOUNT_OPTS || error "start fs2ost failed"
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS || error "start fs2mds failed"
+
+ mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
+ $MOUNT_CMD $MGSNID:/$fsname $MOUNT2 || error "mount $MOUNT2 failed"
+ DIR=$MOUNT2 MOUNT=$MOUNT2 check_mount || error "check $MOUNT2 failed"
+
+ cleanup_21e
+}
+run_test 21e "separate MGS and MDS"
+
test_22() {
start_mds || error "MDS start failed"
# check_mount will block trying to contact ost
mcreate $DIR/$tfile || error "mcreate $DIR/$tfile failed"
rm -f $DIR/$tfile || error "remove $DIR/$tfile failed"
- umount_client $MOUNT
+ umount_client $MOUNT -f
pass
echo "Client mount with a running ost"
}
run_test 23b "Simulate -EINTR during mount"
-fs2mds_HOST=$mds_HOST
-fs2ost_HOST=$ost_HOST
-
-MDSDEV1_2=$fs2mds_DEV
-OSTDEV1_2=$fs2ost_DEV
-OSTDEV2_2=$fs3ost_DEV
-
-cleanup_fs2() {
- trap 0
- echo "umount $MOUNT2 ..."
- umount $MOUNT2 || true
- echo "stopping fs2mds ..."
- stop fs2mds -f || true
- echo "stopping fs2ost ..."
- stop fs2ost -f || true
-}
-
test_24a() {
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
# Check 3.
# prepare a non-symlink parameter in the OSD
- name="lma_self_repair"
+ name="auto_scrub"
param="$device.osd.$name"
cmd="$LCTL get_param -n osd-*.$device.$name"
test_30b() {
setup
+ local orignids=$($LCTL get_param -n \
+ osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
+
+ local orignidcount=$(echo "$orignids" | wc -w)
+
# Make a fake nid. Use the OST nid, and add 20 to the least significant
# numerical part of it. Hopefully that's not already a failover address
# for the server.
- OSTNID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
- ORIGVAL=$(echo $OSTNID | egrep -oi "[0-9]*@")
- NEWVAL=$((($(echo $ORIGVAL | egrep -oi "[0-9]*") + 20) % 256))
- NEW=$(echo $OSTNID | sed "s/$ORIGVAL/$NEWVAL@/")
+ local OSTNID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | \
+ awk '{print $1}')
+ local ORIGVAL=$(echo $OSTNID | egrep -oi "[0-9]*@")
+ local NEWVAL=$((($(echo $ORIGVAL | egrep -oi "[0-9]*") + 20) % 256))
+ local NEW=$(echo $OSTNID | sed "s/$ORIGVAL/$NEWVAL@/")
echo "Using fake nid $NEW"
- TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
+ local TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
grep failover_nids | sed -n 's/.*\($NEW\).*/\1/p'"
set_conf_param_and_check client "$TEST" \
"$FSNAME-OST0000.failover.node" $NEW ||
error "didn't add failover nid $NEW"
- NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
+ local NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
grep failover_nids)
echo $NIDS
- # The NIDS value is the failover nid strings and "[" and "]". So
- # we need to subtract the space taken by the delimiters. This has
- # changed from earlier version of Lustre but this test is run only
- # locally so this change will not break interop. See LU-3386
- NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 3))
- echo "should have 2 failover nids: $NIDCOUNT"
- [ $NIDCOUNT -eq 2 ] || error "Failover nid not added"
+ local NIDCOUNT=$(echo "$NIDS" | wc -w)
+ echo "should have $((orignidcount + 1)) entries \
+ in failover nids string, have $NIDCOUNT"
+ [ $NIDCOUNT -eq $((orignidcount + 1)) ] ||
+ error "Failover nid not added"
+
do_facet mgs "$LCTL conf_param -d $FSNAME-OST0000.failover.node" ||
error "conf_param delete failed"
umount_client $MOUNT
NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
grep failover_nids)
echo $NIDS
- NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 3))
- echo "only 1 final nid should remain: $NIDCOUNT"
- [ $NIDCOUNT -eq 1 ] || error "Failover nids not removed"
+ NIDCOUNT=$(echo "$NIDS" | wc -w)
+ echo "only $orignidcount final entries should remain \
+ in failover nids string, have $NIDCOUNT"
+ [ $NIDCOUNT -eq $orignidcount ] || error "Failover nids not removed"
cleanup || error "cleanup failed with rc $?"
}
local src=/etc/rc.d
local tmp=$TMP/t32_image_create
- if [ $FSNAME != t32fs -o $MDSCOUNT -ne 1 -o \
- \( -z "$MDSDEV" -a -z "$MDSDEV1" \) -o $OSTCOUNT -ne 1 -o \
- -z "$OSTDEV1" ]; then
- error "Needs FSNAME=t32fs MDSCOUNT=1 MDSDEV1=<nonexistent_file>" \
- "(or MDSDEV, in the case of b1_8) OSTCOUNT=1" \
- "OSTDEV1=<nonexistent_file>"
+ if [ $FSNAME != t32fs -o \( -z "$MDSDEV" -a -z "$MDSDEV1" \) -o \
+ $OSTCOUNT -ne 1 -o -z "$OSTDEV1" ]; then
+ error "Needs FSNAME=t32fs MDSCOUNT=2 " \
+ "MDSDEV1=<nonexistent_file>" \
+ "MDSDEV2=<nonexistent_file>" \
+ "(or MDSDEV, in the case of b1_8)" \
+ "OSTCOUNT=1 OSTDEV1=<nonexistent_file>"
fi
mkdir $tmp || {
setupall
pushd /mnt/$FSNAME
ls -Rni --time-style=+%s >$tmp/img/list
- find . ! -name .lustre -type f -exec sha1sum {} \; |
+ find ! -name .lustre -type f -exec sha1sum {} \; |
sort -k 2 >$tmp/img/sha1sums
popd
$LCTL get_param -n version | head -n 1 |
{ if (NF == 1) { getline } else { num++ } ; print $num;} }' \
| tr -d "*" > $tmp/img/ispace
+ if [ $MDSCOUNT -ge 2 ]; then
+ $LFS mkdir -i 1 /mnt/$FSNAME/remote_dir
+ tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME/remote_dir
+ fi
+
stopall
pushd $tmp/src
uname -m >$tmp/img/arch
mv ${MDSDEV1:-$MDSDEV} $tmp/img
+ for num in $(seq 2 $MDSCOUNT); do
+ local devname=$(mdsdevname $num)
+ mv $devname $tmp/img
+ done
mv $OSTDEV1 $tmp/img
version=$(sed -e 's/\(^[0-9]\+\.[0-9]\+\)\(.*$\)/\1/' $tmp/img/commit |
umount $tmp/mnt/lustre || rc=$?
fi
if $shall_cleanup_mdt; then
- $r umount -d $tmp/mnt/mdt || rc=$?
+ $r $UMOUNT $tmp/mnt/mdt || rc=$?
fi
if $shall_cleanup_mdt1; then
- $r umount -d $tmp/mnt/mdt1 || rc=$?
+ $r $UMOUNT $tmp/mnt/mdt1 || rc=$?
fi
if $shall_cleanup_ost; then
- $r umount -d $tmp/mnt/ost || rc=$?
+ $r $UMOUNT $tmp/mnt/ost || rc=$?
fi
$r rm -rf $tmp
done
echo "waiting for dev on $node: dev $devices loop $loops given up"
do_rpc_nodes $node "losetup -a"
- do_rpc_nodes $node "$LCTL devices_list"
+ do_rpc_nodes $node "$LCTL device_list"
return 1
}
local list
local fstype=$(facet_fstype $SINGLEMDS)
local mdt_dev=$tmp/mdt
+ local mdt2_dev=$tmp/mdt2
local ost_dev=$tmp/ost
+ local stripe_index
+ local dir
trap 'trap - RETURN; t32_test_cleanup' RETURN
+ load_modules
mkdir -p $tmp/mnt/lustre || error "mkdir $tmp/mnt/lustre failed"
- $r mkdir -p $tmp/mnt/{mdt,ost}
+ $r mkdir -p $tmp/mnt/{mdt,mdt1,ost}
$r tar xjvf $tarball -S -C $tmp || {
error_noexit "Unpacking the disk image tarball"
return 1
echo " Commit: $img_commit"
echo " Kernel: $img_kernel"
echo " Arch: $img_arch"
- echo "OST version: $(get_lustre_version ost1)"
+ echo "OST version: $(lustre_build_version ost1)"
# The conversion can be made only when both of the following
# conditions are satisfied:
error_noexit "tunefs.lustre before mounting the MDT"
return 1
}
+
+ if $r test -f $mdt2_dev; then
+ $r $TUNEFS --dryrun $mdt2_dev || {
+ $r losetup -a
+ error_noexit "tunefs.lustre before mounting the MDT"
+ return 1
+ }
+ fi
+
if [ "$writeconf" ]; then
mopts=writeconf
if [ $fstype == "ldiskfs" ]; then
error_noexit "Enable mdt quota feature"
return 1
}
+ if $r test -f $mdt2_dev; then
+ $r $TUNEFS --quota $mdt2_dev || {
+ $r losetup -a
+ error_noexit "Enable mdt quota feature"
+ return 1
+ }
+ fi
fi
else
if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
$r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt
$r $LCTL replace_nids $fsname-OST0000 $ostnid
$r $LCTL replace_nids $fsname-MDT0000 $nid
- $r umount -d $tmp/mnt/mdt
+ $r $UMOUNT $tmp/mnt/mdt
fi
mopts=exclude=$fsname-OST0000
}
shall_cleanup_mdt=true
- if [ "$dne_upgrade" != "no" ]; then
+ if $r test -f $mdt2_dev; then
+ mopts=mgsnode=$nid,$mopts
+ $r $MOUNT_CMD -o $mopts $mdt2_dev $tmp/mnt/mdt1 || {
+ $r losetup -a
+ error_noexit "Mounting the MDT"
+ return 1
+ }
+
+ echo "mount new MDT....$mdt2_dev"
+ $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 ||
+ error_noexit "enable remote dir create failed"
+
+ shall_cleanup_mdt1=true
+ elif [ "$dne_upgrade" != "no" ]; then
local fs2mdsdev=$(mdsdevname 1_2)
local fs2mdsvdev=$(mdsvdevname 1_2)
}
echo "mount new MDT....$fs2mdsdev"
- $r mkdir -p $tmp/mnt/mdt1
$r $MOUNT_CMD -o $mopts $fs2mdsdev $tmp/mnt/mdt1 || {
error_noexit "mount mdt1 failed"
return 1
error_noexit "Setting \"lov.stripesize\""
return 1
}
+ $r $LCTL conf_param $fsname-MDT0000.mdd.atime_diff=70 || {
+ error_noexit "Setting \"mdd.atime_diff\""
+ return 1
+ }
if [ "$ff_convert" != "no" -a $(facet_fstype ost1) == "ldiskfs" ]; then
$r $LCTL lfsck_start -M $fsname-OST0000 || {
error_noexit "Setting MDT1 \"lov.stripesize\""
return 1
}
-
fi
if [ "$writeconf" ]; then
error_noexit "Mounting the client"
return 1
}
+
shall_cleanup_lustre=true
- $LCTL set_param debug="$PTLDEBUG"
+ $r $LCTL set_param debug="$PTLDEBUG"
t32_verify_quota $node $fsname $tmp/mnt/lustre || {
error_noexit "verify quota failed"
}
if [ "$dne_upgrade" != "no" ]; then
- $LFS mkdir -i 1 $tmp/mnt/lustre/remote_dir || {
+ $LFS mkdir -i 1 -c2 $tmp/mnt/lustre/striped_dir || {
error_noexit "set remote dir failed"
return 1
}
+ $LFS setdirstripe -D -c2 $tmp/mnt/lustre/striped_dir
+
pushd $tmp/mnt/lustre
- tar -cf - . --exclude=./remote_dir |
- tar -xvf - -C remote_dir 1>/dev/null || {
+ tar -cf - . --exclude=./striped_dir \
+ --exclude=./remote_dir |
+ tar -xvf - -C striped_dir 1>/dev/null || {
error_noexit "cp to remote dir failed"
return 1
}
popd
fi
+ # If it is upgrade from DNE (2.5), then rename the remote dir,
+ # which is created in 2.5 to striped dir.
+ if $r test -f $mdt2_dev; then
+ stripe_index=$(LFS getdirstripe -i \
+ $tmp/mnt/lustre/remote_dir)
+ [ $stripe_index -eq 1 ] || {
+ error_noexit "get index $striped_index failed"
+ return 1
+ }
+ mv $tmp/mnt/lustre/remote_dir \
+ $tmp/mnt/lustre/striped_dir/ || {
+ error_noexit "mv failed"
+ return 1
+ }
+ fi
+
dd if=/dev/zero of=$tmp/mnt/lustre/tmp_file bs=10k count=10 || {
error_noexit "dd failed"
return 1
# is identical
$r cat $tmp/sha1sums | sort -k 2 >$tmp/sha1sums.orig
if [ "$dne_upgrade" != "no" ]; then
- pushd $tmp/mnt/lustre/remote_dir
+ pushd $tmp/mnt/lustre/striped_dir
else
pushd $tmp/mnt/lustre
fi
- find ! -name .lustre -type f -exec sha1sum {} \; |
+ find ! -path "*remote_dir*" ! -name .lustre -type f \
+ -exec sha1sum {} \; |
sort -k 2 >$tmp/sha1sums || {
+ popd
error_noexit "sha1sum"
return 1
}
error_noexit "sha1sum verification failed"
return 1
fi
+
+ # if upgrade from DNE (2.5), then check remote directory
+ if $r test -f $mdt2_dev; then
+ pushd $tmp/mnt/lustre/striped_dir/remote_dir
+ find ! -name .lustre -type f \
+ -exec sha1sum {} \; |
+ sort -k 2 >$tmp/sha1sums || {
+ popd
+ error_noexit "sha1sum"
+ return 1
+ }
+ popd
+ if ! diff -ub $tmp/sha1sums.orig \
+ $tmp/sha1sums; then
+ error_noexit "sha1sum dne failed"
+ return 1
+ fi
+ fi
else
echo "sha1sum verification skipped"
fi
if [ "$dne_upgrade" != "no" ]; then
- rm -rf $tmp/mnt/lustre/remote_dir || {
+ rm -rf $tmp/mnt/lustre/striped_dir || {
error_noexit "remove remote dir failed"
return 1
}
echo "list verification skipped"
fi
+ # migrate files/dirs to remote MDT, then move them back
+ if [ $(lustre_version_code mds1) -ge $(version_code 2.7.50) -a \
+ $dne_upgrade != "no" ]; then
+ $r $LCTL set_param -n \
+ mdt.${fsname}*.enable_remote_dir=1 2>/dev/null
+
+ echo "test migration"
+ pushd $tmp/mnt/lustre
+ for dir in $(find ! -name .lustre ! -name . -type d); do
+ mdt_index=$($LFS getdirstripe -i $dir)
+ stripe_cnt=$($LFS getdirstripe -c $dir)
+ if [ $mdt_index = 0 -a $stripe_cnt -le 1 ]; then
+ $LFS mv -M 1 $dir || {
+ popd
+ error_noexit "migrate MDT1 failed"
+ return 1
+ }
+ fi
+ done
+
+ for dir in $(find ! -name . ! -name .lustre -type d); do
+ mdt_index=$($LFS getdirstripe -i $dir)
+ stripe_cnt=$($LFS getdirstripe -c $dir)
+ if [ $mdt_index = 1 -a $stripe_cnt -le 1 ]; then
+ $LFS mv -M 0 $dir || {
+ popd
+ error_noexit "migrate MDT0 failed"
+ return 1
+ }
+ fi
+ done
+ popd
+ fi
+
#
# When adding new data verification tests, please check for
# the presence of the required reference files first, like
shall_cleanup_lustre=false
else
if [ "$dne_upgrade" != "no" ]; then
- $r umount -d $tmp/mnt/mdt1 || {
+ $r $UMOUNT $tmp/mnt/mdt1 || {
error_noexit "Unmounting the MDT2"
return 1
}
shall_cleanup_mdt1=false
fi
- $r umount -d $tmp/mnt/mdt || {
+ $r $UMOUNT $tmp/mnt/mdt || {
error_noexit "Unmounting the MDT"
return 1
}
shall_cleanup_mdt=false
- $r umount -d $tmp/mnt/ost || {
+ $r $UMOUNT $tmp/mnt/ost || {
error_noexit "Unmounting the OST"
return 1
}
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
t32_check
for tarball in $tarballs; do
+ # Do not support 1_8 and 2_1 direct upgrade to DNE2 anymore */
+ echo $tarball | grep "1_8" && continue
+ echo $tarball | grep "2_1" && continue
+ load_modules
dne_upgrade=yes t32_test $tarball writeconf || rc=$?
done
return $rc
cp /etc/hosts $MOUNT2/ || error "copy /etc/hosts $MOUNT2/ failed"
$GETSTRIPE $MOUNT2/hosts || error "$GETSTRIPE $MOUNT2/hosts failed"
- umount -d $MOUNT2
+ umount $MOUNT2
stop fs2ost -f
stop fs2mds -f
cleanup_nocli || error "cleanup_nocli failed with $?"
local rc=0
local FSNAME2=test1234
- local fs3ost_HOST=$ost_HOST
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
rc=3
fi
- umount -d $MOUNT2
+ $UMOUNT $MOUNT2
stop fs3ost -f || error "unable to stop OST3"
stop fs2ost -f || error "unable to stop OST2"
stop fs2mds -f || error "unable to stop second MDS"
echo mount_op=$mount_op
- do_facet $SINGLEMDS "umount -d $mntpt && rm -f $mdsdev_sym"
+ do_facet $SINGLEMDS "$UMOUNT $mntpt && rm -f $mdsdev_sym"
if $(echo $mount_op | grep -q "unable to set tunable"); then
error "set tunables failed for symlink device"
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
- start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
+ start_mdt 1 -o nosvc -n
+ if [ $MDSCOUNT -ge 2 ]; then
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
+ fi
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
- start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs,force
+ start_mdt 1 -o nomgs,force
mount_client $MOUNT || error "mount_client $MOUNT failed"
sleep 5
reformat
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
- start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
+ start_mdt 1 -o nosvc -n
+ if [ $MDSCOUNT -ge 2 ]; then
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
+ fi
start_ost || error "Unable to start OST1"
- start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs,force
+ start_mdt 1 -o nomgs,force
mount_client $MOUNT || error "mount_client $MOUNT failed"
sleep 5
{ skip "Need MDS version 2.5.4+ or 2.5.26+ or 2.6.52+"; return; }
cleanup
- # MDT concurent start
+ # MDT concurrent start
#define OBD_FAIL_TGT_DELAY_CONNECT 0x703
do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x703"
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS &
echo "2nd MDT start succeed"
else
stop mds1 -f
- error "unexpected concurent MDT mounts result, rc=$rc rc2=$rc2"
+ error "unexpected concurrent MDT mounts result, rc=$rc rc2=$rc2"
+ fi
+
+ if [ $MDSCOUNT -ge 2 ]; then
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
fi
- # OST concurent start
+ # OST concurrent start
+
#define OBD_FAIL_TGT_DELAY_CONNECT 0x703
do_facet ost1 "$LCTL set_param fail_loc=0x703"
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &
echo "1st OST start failed with EALREADY"
echo "2nd OST start succeed"
else
- stop mds1 -f
+ stop_mds -f
stop ost1 -f
- error "unexpected concurent OST mounts result, rc=$rc rc2=$rc2"
+ error "unexpected concurrent OST mounts result, rc=$rc rc2=$rc2"
fi
# cleanup
- stop mds1 -f
+ stop_mds
stop ost1 -f
# verify everything ok
start_mds
if [ $? != 0 ]
then
- stop mds1 -f
+ stop_mds
error "MDT(s) start failed"
fi
start_ost
if [ $? != 0 ]
then
- stop mds1 -f
+ stop_mds
stop ost1 -f
error "OST(s) start failed"
fi
mount_client $MOUNT
if [ $? != 0 ]
then
- stop mds1 -f
+ stop_mds
stop ost1 -f
error "client start failed"
fi
check_mount
if [ $? != 0 ]
then
- stop mds1 -f
+ stop_mds
stop ost1 -f
error "client mount failed"
fi
cleanup
}
-run_test 41c "concurent mounts of MDT/OST should all fail but one"
+run_test 41c "concurrent mounts of MDT/OST should all fail but one"
test_42() { #bug 14693
setup
# root should be able to access root file after that
#
local NIDLIST=$($LCTL list_nids all | tr '\n' ' ')
- NIDLIST="2@elan $NIDLIST 192.168.0.[2,10]@tcp"
+ NIDLIST="2@gni $NIDLIST 192.168.0.[2,10]@tcp"
NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
set_conf_param_and_check mds \
"$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
cleanup_48() {
trap 0
- # reformat after this test is needed - if test will failed
+ # reformat after this test is needed - if the test fails,
# we will have unkillable file at FS
reformat_and_config
}
stop_ost2 || error "Unable to stop OST2"
fi
- umount_client $MOUNT || error "Unable to unmount client"
+ umount_client $MOUNT -f || error "Unable to unmount client"
stop_ost || error "Unable to stop OST1"
stop_mds || error "Unable to stop MDS"
#writeconf to remove all ost2 traces for subsequent tests
}
run_test 50h "LU-642: activate deactivated OST"
+test_50i() {
+ # prepare MDT/OST, make OSC inactive for OST1
+ [ "$MDSCOUNT" -lt "2" ] && skip_env "$MDSCOUNT < 2, skipping" && return
+
+ [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ load_modules
+ do_facet mds2 "$TUNEFS --param mdc.active=0 $(mdsdevname 2)" ||
+ error "tunefs MDT2 failed"
+ start_mds || error "Unable to start MDT"
+ start_ost || error "Unable to start OST1"
+ start_ost2 || error "Unable to start OST2"
+ mount_client $MOUNT || error "client start failed"
+
+ mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+
+ $LCTL conf_param ${FSNAME}-MDT0000.mdc.active=0 &&
+ error "deactive MDC0 succeeds"
+ # activate MDC for MDT2
+ local TEST="$LCTL get_param -n mdc.${FSNAME}-MDT0001-mdc-[!M]*.active"
+ set_conf_param_and_check client \
+ "$TEST" "${FSNAME}-MDT0001.mdc.active" 1 ||
+ error "Unable to activate MDT2"
+
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds2 FULL
+ if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.60) ]
+ then
+ wait_dne_interconnect
+ fi
+ $LFS mkdir -i1 $DIR/$tdir/2 || error "mkdir $DIR/$tdir/2 failed"
+ # create some file
+ createmany -o $DIR/$tdir/2/$tfile-%d 1 || error "create files failed"
+
+ rm -rf $DIR/$tdir/2 || error "unlink dir failed"
+
+ # deactivate MDC for MDT2
+ local TEST="$LCTL get_param -n mdc.${FSNAME}-MDT0001-mdc-[!M]*.active"
+ set_conf_param_and_check client \
+ "$TEST" "${FSNAME}-MDT0001.mdc.active" 0 ||
+ error "Unable to deactivate MDT2"
+
+ $LFS mkdir -i1 $DIR/$tdir/2 &&
+ error "mkdir $DIR/$tdir/2 succeeds after deactive MDT"
+
+ # cleanup
+ umount_client $MOUNT || error "Unable to umount client"
+ stop_mds
+ stop_ost
+ stop_ost 2
+}
+run_test 50i "activate deactivated MDT"
+
test_51() {
local LOCAL_TIMEOUT=20
start_ost2 || error "Unable to start OST1"
wait $pid
stop_ost2 || error "Unable to stop OST1"
- cleanup || error "cleanup failed with $?"
+ umount_client $MOUNT -f || error “unmount $MOUNT failed”
+ cleanup_nocli || error “stop server failed”
#writeconf to remove all ost2 traces for subsequent tests
writeconf_or_reformat
}
[ $? -eq 0 ] || { error "Unable to move objects"; return 14; }
# recover objects dry-run
- echo "ll_recover_lost_found_objs dry_run"
- do_node $ost1node "ll_recover_lost_found_objs -n -d $ost1mnt/O" ||
- error "ll_recover_lost_found_objs failed"
+ if [ $(lustre_version_code ost1) -ge $(version_code 2.5.56) ]; then
+ echo "ll_recover_lost_found_objs dry_run"
+ do_node $ost1node \
+ "ll_recover_lost_found_objs -n -d $ost1mnt/O" ||
+ error "ll_recover_lost_found_objs failed"
+ fi
# recover objects
echo "ll_recover_lost_found_objs fix run"
run_test 55 "check lov_objid size"
test_56() {
+ local server_version=$(lustre_version_code $SINGLEMDS)
local mds_journal_size_orig=$MDSJOURNALSIZE
local n
MDSJOURNALSIZE=16
for num in $(seq 1 $MDSCOUNT); do
- add mds${num} $(mkfs_opts mds${num} $(mdsdevname $num)) \
- --reformat $(mdsdevname $num) $(mdsvdevname $num)
+ reformat_mdt $num
done
add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=10000 --reformat \
$(ostdevname 1) $(ostvdevname 1)
mount_client $MOUNT || error "Unable to mount client"
echo ok
$LFS osts
- wait_osc_import_state mds ost1 FULL
- wait_osc_import_state mds ost2 FULL
- $SETSTRIPE --stripe-count=-1 $DIR/$tfile ||
- error "Unable to setstripe $DIR/$tfile"
- n=$($LFS getstripe --stripe-count $DIR/$tfile)
- [ "$n" -eq 2 ] || error "Stripe count not two: $n"
- rm $DIR/$tfile
+
+ if [[ $server_version -ge $(version_code 2.6.54) ]] ||
+ [[ $server_version -ge $(version_code 2.5.4) &&
+ $server_version -lt $(version_code 2.5.11) ]]; then
+ wait_osc_import_state mds ost1 FULL
+ wait_osc_import_state mds ost2 FULL
+ $SETSTRIPE --stripe-count=-1 $DIR/$tfile ||
+ error "Unable to setstripe $DIR/$tfile"
+ n=$($LFS getstripe --stripe-count $DIR/$tfile)
+ [ "$n" -eq 2 ] || error "Stripe count not two: $n"
+ rm $DIR/$tfile
+ fi
+
stopall
MDSJOURNALSIZE=$mds_journal_size_orig
reformat
run_test 60 "check mkfs.lustre --mkfsoptions -E -O options setting"
test_61() { # LU-80
- local reformat=false
+ local lxattr=false
[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.1.53) ] ||
{ skip "Need MDS version at least 2.1.53"; return 0; }
if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
- ! large_xattr_enabled; then
- reformat=true
- LDISKFS_MKFS_OPTS+=" -O large_xattr"
+ ! large_xattr_enabled; then
+ lxattr=true
for num in $(seq $MDSCOUNT); do
- add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
- --reformat $(mdsdevname $num) $(mdsvdevname $num) ||
- error "add mds $num failed"
+ do_facet mds${num} $TUNE2FS -O large_xattr \
+ $(mdsdevname $num) ||
+ error "tune2fs on mds $num failed"
done
fi
local large_value="$(generate_string $(max_xattr_size))"
local small_value="bar"
- local name="trusted.big"
- log "save large xattr $name on $file"
- setfattr -n $name -v $large_value $file ||
- error "saving $name on $file failed"
-
- local new_value=$(get_xattr_value $name $file)
- [[ "$new_value" != "$large_value" ]] &&
- error "$name different after saving"
-
- log "shrink value of $name on $file"
- setfattr -n $name -v $small_value $file ||
- error "shrinking value of $name on $file failed"
-
- new_value=$(get_xattr_value $name $file)
- [[ "$new_value" != "$small_value" ]] &&
- error "$name different after shrinking"
-
- log "grow value of $name on $file"
- setfattr -n $name -v $large_value $file ||
- error "growing value of $name on $file failed"
-
- new_value=$(get_xattr_value $name $file)
- [[ "$new_value" != "$large_value" ]] &&
- error "$name different after growing"
-
- log "check value of $name on $file after remounting MDS"
- fail $SINGLEMDS
- new_value=$(get_xattr_value $name $file)
- [[ "$new_value" != "$large_value" ]] &&
- error "$name different after remounting MDS"
-
- log "remove large xattr $name from $file"
- setfattr -x $name $file || error "removing $name from $file failed"
-
- rm -f $file
- stopall
- if $reformat; then
- LDISKFS_MKFS_OPTS=${LDISKFS_MKFS_OPTS% -O large_xattr}
- reformat
+ local name="trusted.big"
+ log "save large xattr $name on $file"
+ setfattr -n $name -v $large_value $file ||
+ error "saving $name on $file failed"
+
+ local new_value=$(get_xattr_value $name $file)
+ [[ "$new_value" != "$large_value" ]] &&
+ error "$name different after saving"
+
+ log "shrink value of $name on $file"
+ setfattr -n $name -v $small_value $file ||
+ error "shrinking value of $name on $file failed"
+
+ new_value=$(get_xattr_value $name $file)
+ [[ "$new_value" != "$small_value" ]] &&
+ error "$name different after shrinking"
+
+ log "grow value of $name on $file"
+ setfattr -n $name -v $large_value $file ||
+ error "growing value of $name on $file failed"
+
+ new_value=$(get_xattr_value $name $file)
+ [[ "$new_value" != "$large_value" ]] &&
+ error "$name different after growing"
+
+ log "check value of $name on $file after remounting MDS"
+ fail $SINGLEMDS
+ new_value=$(get_xattr_value $name $file)
+ [[ "$new_value" != "$large_value" ]] &&
+ error "$name different after remounting MDS"
+
+ log "remove large xattr $name from $file"
+ setfattr -x $name $file || error "removing $name from $file failed"
+
+ if $lxattr; then
+ stopall || error "stopping for e2fsck run"
+ for num in $(seq $MDSCOUNT); do
+ run_e2fsck $(facet_active_host mds$num) \
+ $(mdsdevname $num) "-y" ||
+ error "e2fsck MDT$num failed"
+ done
+ setup_noconfig || error "remounting the filesystem failed"
+ fi
+
+ # need to delete this file to avoid problems in other tests
+ rm -f $file
+ stopall || error "stopping systems to turn off large_xattr"
+ if $lxattr; then
+ for num in $(seq $MDSCOUNT); do
+ do_facet mds${num} $TUNE2FS -O ^large_xattr \
+ $(mdsdevname $num) ||
+ error "tune2fs on mds $num failed"
+ done
fi
}
run_test 61 "large xattr"
{ skip "Need MDS version at least 2.2.51"; return 0; }
echo "disable journal for mds"
- do_facet mds tune2fs -O ^has_journal $mdsdev || error "tune2fs failed"
+ do_facet mds $TUNE2FS -O ^has_journal $mdsdev || error "tune2fs failed"
start_mds && error "MDT start should fail"
echo "disable journal for ost"
- do_facet ost1 tune2fs -O ^has_journal $ostdev || error "tune2fs failed"
+ do_facet ost1 $TUNE2FS -O ^has_journal $ostdev || error "tune2fs failed"
start_ost && error "OST start should fail"
cleanup || error "cleanup failed with rc $?"
reformat_and_config
stop_ost2 || error "Unable to stop second ost"
echo "$LFS df"
$LFS df --lazy || error "lfs df failed"
- cleanup || error "cleanup failed with $?"
+ umount_client $MOUNT -f || error “unmount $MOUNT failed”
+ cleanup_nocli || error "cleanup_nocli failed with $?"
#writeconf to remove all ost2 traces for subsequent tests
writeconf_or_reformat
}
do_facet $SINGLEMDS \
"mount -t $(facet_fstype $SINGLEMDS) $opts $devname $brpt"
do_facet $SINGLEMDS "rm -f ${brpt}/last_rcvd"
- do_facet $SINGLEMDS "umount -d $brpt"
+ do_facet $SINGLEMDS "$UMOUNT $brpt"
# restart MDS, the "last_rcvd" file should be recreated.
start_mds || error "fail to restart the MDS"
}
run_test 68 "be able to reserve specific sequences in FLDB"
+# Test 69: is about the total number of objects ever created on an OST.
+# so that when it is reformatted the normal MDS->OST orphan recovery won't
+# just "precreate" the missing objects. In the past it might try to recreate
+# millions of objects after an OST was reformatted
test_69() {
local server_version=$(lustre_version_code $SINGLEMDS)
skip "Need MDS version at least 2.5.0" && return
setup
+ mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
# use OST0000 since it probably has the most creations
local OSTNAME=$(ostname_from_index 0)
local last_id=$(do_facet mds1 $LCTL get_param -n \
osc.$mdtosc_proc1.prealloc_last_id)
- # Want to have OST LAST_ID over 1.5 * OST_MAX_PRECREATE to
- # verify that the LAST_ID recovery is working properly. If
+ # Want to have OST LAST_ID over 5 * OST_MAX_PRECREATE to
+ # verify that the LAST_ID recovery is working properly. If
# not, then the OST will refuse to allow the MDS connect
# because the LAST_ID value is too different from the MDS
#define OST_MAX_PRECREATE=20000
- local num_create=$((20000 * 5))
+ local ost_max_pre=20000
+ local num_create=$(( ost_max_pre * 5 + 1 - last_id))
+
+ # If the LAST_ID is already over 5 * OST_MAX_PRECREATE, we don't
+ # need to create any files. So, skip this section.
+ if [ $num_create -gt 0 ]; then
+ # Check the number of inodes available on OST0
+ local files=0
+ local ifree=$($LFS df -i $MOUNT | awk '/OST0000/ { print $4 }')
+ log "On OST0, $ifree inodes available. Want $num_create."
+
+ $SETSTRIPE -i 0 $DIR/$tdir ||
+ error "$SETSTRIPE -i 0 $DIR/$tdir failed"
+ if [ $ifree -lt 10000 ]; then
+ files=$(( ifree - 50 ))
+ else
+ files=10000
+ fi
+
+ local j=$((num_create / files + 1))
+ for i in $(seq 1 $j); do
+ createmany -o $DIR/$tdir/$tfile-$i- $files ||
+ error "createmany fail create $files files: $?"
+ unlinkmany $DIR/$tdir/$tfile-$i- $files ||
+ error "unlinkmany failed unlink $files files"
+ done
+ fi
- mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
- $SETSTRIPE -i 0 $DIR/$tdir || error "$SETSTRIPE -i 0 $DIR/$tdir failed"
- createmany -o $DIR/$tdir/$tfile- $num_create ||
- error "createmany: failed to create $num_create files: $?"
# delete all of the files with objects on OST0 so the
# filesystem is not inconsistent later on
- $LFS find $MOUNT --ost 0 | xargs rm
+ $LFS find $MOUNT --ost 0 -print0 | xargs -0 rm
+ umount_client $MOUNT || error "umount client failed"
stop_ost || error "OST0 stop failure"
add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --reformat --replace \
$(ostdevname 1) $(ostvdevname 1) ||
start_ost || error "OST0 restart failure"
wait_osc_import_state mds ost FULL
+ mount_client $MOUNT || error "mount client failed"
touch $DIR/$tdir/$tfile-last || error "create file after reformat"
local idx=$($GETSTRIPE -i $DIR/$tdir/$tfile-last)
[ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
+ local iused=$($LFS df -i $MOUNT | awk '/OST0000/ { print $3 }')
+ log "On OST0, $iused used inodes"
+ [ $iused -ge $((ost_max_pre/2 + 1000)) ] &&
+ error "OST replacement created too many inodes; $iused"
cleanup || error "cleanup failed with $?"
}
run_test 69 "replace an OST with the same index"
start_mdt 1 || error "MDT0 start fail"
start_ost || error "OST0 start fail"
-
- start_mdt 2 || error "MDT1 start fail"
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
mount_client $MOUNT || error "mount client fails"
start_ost || error "OST0 start fail"
- start_mdt 1 || error "MDT0 start fail"
- start_mdt 2 || error "MDT1 start fail"
+ start_mds || error "MDS start fail"
mount_client $MOUNT || error "mount client fails"
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local MDTIDX=1
- start_mdt 1 || error "MDT0 start fail"
- start_mdt 2 || error "MDT1 start fail"
+ start_mds || error "MDS start fail"
start_ost || error "OST0 start fail"
mount_client $MOUNT || error "mount client fails"
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local MDTIDX=1
- start_mdt 1 || error "MDT0 start fail"
- start_mdt 2 || error "MDT1 start fail"
+ start_mds || error "MDS start fail"
start_ost || error "OST0 start fail"
mount_client $MOUNT || error "mount client fails"
start_mdt 1 || error "MDT0 start fail"
start_ost || error "OST0 start fail"
- start_mdt 2 || error "MDT1 start fail"
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
+
start_ost2 || error "OST1 start fail"
mount_client $MOUNT || error "mount client fails"
rm -rf $DIR/$tdir || error "delete dir fail"
umount_client $MOUNT || error "umount_client failed"
- stop_mdt 1 || error "MDT0 stop fail"
- stop_mdt 2 || error "MDT1 stop fail"
+ stop_mds || error "MDS stop fail"
stop_ost || error "OST0 stop fail"
stop_ost2 || error "OST1 stop fail"
}
fi
local MDTIDX=1
- start_mdt 2 || error "MDT1 start fail"
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
start_ost || error "OST0 start fail"
start_mdt 1 || error "MDT0 start fail"
start_ost2 || error "OST1 start fail"
rm -rf $DIR/$tdir || error "delete dir fail"
umount_client $MOUNT || error "umount_client failed"
- stop_mdt 1 || error "MDT0 stop fail"
- stop_mdt 2 || error "MDT1 stop fail"
+ stop_mds || error "MDT0 stop fail"
stop_ost || error "OST0 stop fail"
stop_ost2 || error "OST1 stop fail"
}
start_ost || error "OST0 start fail"
start_ost2 || error "OST1 start fail"
- start_mdt 2 || error "MDT1 start fail"
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
start_mdt 1 || error "MDT0 start fail"
mount_client $MOUNT || error "mount client fails"
rm -rf $DIR/$tdir || error "delete dir fail"
umount_client $MOUNT || error "umount_client failed"
- stop_mdt 1 || error "MDT0 stop fail"
- stop_mdt 2 || error "MDT1 stop fail"
+ stop_mds || error "MDS stop fail"
stop_ost || error "OST0 stop fail"
stop_ost2 || error "OST1 stop fail"
local MDTIDX=1
start_ost || error "OST0 start fail"
- start_mdt 2 || error "MDT0 start fail"
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
start_mdt 1 || error "MDT0 start fail"
start_ost2 || error "OST1 start fail"
rm -rf $DIR/$tdir || error "delete dir fail"
umount_client $MOUNT || error "umount_client failed"
- stop_mdt 1 || error "MDT0 stop fail"
- stop_mdt 2 || error "MDT1 stop fail"
+ stop_mds || error "MDS stop fail"
stop_ost || error "OST0 stop fail"
stop_ost2 || error "OST1 stop fail"
local MDTIDX=1
start_ost || error "OST0 start fail"
- start_mdt 2 || error "MDT1 start fail"
+ for num in $(seq 2 $MDSCOUNT); do
+ start_mdt $num || return
+ done
start_ost2 || error "OST1 start fail"
start_mdt 1 || error "MDT0 start fail"
rm -rf $DIR/$tdir || error "delete dir fail"
umount_client $MOUNT || error "umount_client failed"
- stop_mdt 1 || error "MDT0 stop fail"
- stop_mdt 2 || error "MDT1 stop fail"
+ stop_mds || error "MDS stop fail"
stop_ost || error "OST0 stop fail"
stop_ost2 || error "OST1 stop fail"
add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
--reformat $(mdsdevname $num) $(mdsvdevname $num) ||
error "add mds $num failed"
- $TUNE2FS -O extents $(mdsdevname $num)
+ do_facet mds${num} "$TUNE2FS -O extents $(mdsdevname $num)" ||
+ error "$TUNE2FS failed on mds${num}"
done
add ost1 $(mkfs_opts ost1 $ostdev) --reformat $ostdev ||
add ost1 $opts_ost1 $ostdev1 $ostvdev2 &&
error "Must specify --mgsnode when formatting an ost"
- return 0
+ reformat
}
run_test 79 "format MDT/OST without mgs option (should return errors)"
test_80() {
- start_mds
- start_ost
+ start_mds || error "Failed to start MDT"
+ start_ost || error "Failed to start OST1"
uuid=$(do_facet ost1 $LCTL get_param -n mgc.*.uuid)
#define OBD_FAIL_MGS_PAUSE_TARGET_CON 0x906
do_facet ost1 "$LCTL set_param fail_val=10 fail_loc=0x906"
do_facet mgs "$LCTL set_param fail_val=10 fail_loc=0x906"
do_facet mgs "$LCTL set_param -n mgs/MGS/evict_client $uuid"
sleep 30
- start_ost2
+ start_ost2 || error "Failed to start OST2"
do_facet ost1 "$LCTL set_param fail_loc=0"
stopall
}
run_test 80 "mgc import reconnect race"
-# Save the original values of $OSTCOUNT and $OSTINDEX$i.
+#Save the original values of $OSTCOUNT and $OSTINDEX$i.
save_ostindex() {
local new_ostcount=$1
saved_ostcount=$OSTCOUNT
run_test 82b "specify OSTs for file with --pool and --ost-list options"
test_83() {
- local dev
- local ostmnt
- local fstype
- local mnt_opts
-
+ [[ $(lustre_version_code ost1) -ge $(version_code 2.6.91) ]] ||
+ { skip "Need OST version at least 2.6.91" && return 0; }
if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
skip "Only applicable to ldiskfs-based MDTs"
return
fi
+ local dev
+ local ostmnt
+ local fstype
+ local mnt_opts
+
dev=$(ostdevname 1)
ostmnt=$(facet_mntpt ost1)
fstype=$(facet_fstype ost1)
echo $((2*$RECONNECT_DELAY_MAX))
}
-test_83() {
+test_84() {
local facet=$SINGLEMDS
local num=$(echo $facet | tr -d "mds")
local dev=$(mdsdevname $num)
local time_min=$(recovery_time_min)
local recovery_duration
local completed_clients
+ local correct_clients
+ local wrap_up=5
- echo "start mds service on `facet_active_host $facet`"
- start $facet ${dev} $MDS_MOUNT_OPTS \
- "-o recovery_time_hard=$time_min,recovery_time_soft=$time_min"\
- $@ || return 94
+ load_modules
+ echo "start mds service on $(facet_active_host $facet)"
+ start_mds \
+ "-o recovery_time_hard=$time_min,recovery_time_soft=$time_min" $@ ||
+ error "start MDS failed"
start_ost
start_ost2
- echo "recovery_time_hard $time_min, recovery_time_soft $time_min, \
- timeout $TIMEOUT"
+ echo "recovery_time=$time_min, timeout=$TIMEOUT, wrap_up=$wrap_up"
mount_client $MOUNT1 || error "mount failed"
mount_client $MOUNT2 || error "mount failed"
# We need to catch the end of recovery window to extend it.
# Skip 5 requests and add delay to request handling.
#define OBD_FAIL_TGT_REPLAY_DELAY 0x709 | FAIL_SKIP
- do_facet $SINGLEMDS "lctl set_param fail_loc=0x20000709"
- do_facet $SINGLEMDS "lctl set_param fail_val=5"
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x20000709 fail_val=5"
- facet_failover $SINGLEMDS || error "failover: $?"
+ facet_failover --fsck $SINGLEMDS || error "failover: $?"
client_up
echo "recovery status"
- do_facet $SINGLEMDS "$LCTL get_param -n \
- mdt.$FSNAME-MDT0000.recovery_status"
-
- recovery_duration=$(do_facet $SINGLEMDS "$LCTL get_param -n \
- mdt.$FSNAME-MDT0000.recovery_status" | \
- grep recovery_duration |awk '{print $2}')
- (($recovery_duration>$time_min)) && \
- error "recovery_duration > recovery_time_hard"
- completed_clients=$(do_facet $SINGLEMDS "$LCTL get_param -n \
- mdt.$FSNAME-MDT0000.recovery_status" | \
- grep completed_clients |awk '{print $2}')
- [ "$completed_clients" = "1/2" ] || \
- error "completed_clients != 1/2: "$completed_clients
+ do_facet $SINGLEMDS \
+ "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status"
+
+ recovery_duration=$(do_facet $SINGLEMDS \
+ "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status" |
+ awk '/recovery_duration/ { print $2 }')
+ (( $recovery_duration > $time_min + $wrap_up )) &&
+ error "recovery_duration > recovery_time_hard + wrap up"
+ completed_clients=$(do_facet $SINGLEMDS \
+ "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status" |
+ awk '/completed_clients/ { print $2 }')
+
+ correct_clients="$MDSCOUNT/$((MDSCOUNT+1))"
+ [ "$completed_clients" = "${correct_clients}" ] ||
+ error "$completed_clients != $correct_clients"
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
umount_client $MOUNT1
stop_ost2
stop_mds
}
-run_test 83 "check recovery_hard_time"
+run_test 84 "check recovery_hard_time"
+
+test_85() {
+ [[ $(lustre_version_code ost1) -ge $(version_code 2.7.55) ]] ||
+ { skip "Need OST version at least 2.7.55" && return 0; }
+##define OBD_FAIL_OSD_OST_EA_FID_SET 0x197
+ do_facet ost1 "lctl set_param fail_loc=0x197"
+ start_ost
+ stop_ost
+}
+run_test 85 "osd_ost init: fail ea_fid_set"
+
+test_86() {
+ [ "$(facet_fstype ost1)" = "zfs" ] &&
+ skip "LU-6442: no such mkfs params for ZFS OSTs" && return
+
+ local OST_OPTS="$(mkfs_opts ost1 $(ostdevname 1)) \
+ --reformat $(ostdevname 1) $(ostvdevname 1)"
+
+ local NEWSIZE=1024
+ local OLDSIZE=$(do_facet ost1 "$DEBUGFS -c -R stats $(ostdevname 1)" |
+ awk '/Flex block group size: / { print $NF; exit; }')
+
+ local opts=OST_OPTS
+ if [[ ${!opts} != *mkfsoptions* ]]; then
+ eval opts=\"${!opts} \
+ --mkfsoptions='\\\"-O flex_bg -G $NEWSIZE\\\"'\"
+ else
+ val=${!opts//--mkfsoptions=\\\"/ \
+ --mkfsoptions=\\\"-O flex_bg -G $NEWSIZE }
+ eval opts='${val}'
+ fi
+
+ echo "params: $opts"
+
+ add ost1 $opts || error "add ost1 failed with new params"
+
+ local FOUNDSIZE=$(do_facet ost1 "$DEBUGFS -c -R stats $(ostdevname 1)" |
+ awk '/Flex block group size: / { print $NF; exit; }')
+
+ [[ $FOUNDSIZE == $NEWSIZE ]] ||
+ error "Flex block group size: $FOUNDSIZE, expected: $NEWSIZE"
+ return 0
+}
+run_test 86 "Replacing mkfs.lustre -G option"
+
+test_87() { #LU-6544
+ [[ $(lustre_version_code $SINGLEMDS1) -ge $(version_code 2.7.56) ]] ||
+ { skip "Need MDS version at least 2.7.56" && return; }
+ [[ $(facet_fstype $SINGLEMDS) != ldiskfs ]] &&
+ { skip "Only applicable to ldiskfs-based MDTs" && return; }
+ [[ $OSTCOUNT -gt 69 ]] &&
+ { skip "Ignore wide striping situation" && return; }
+
+ local mdsdev=$(mdsdevname 1)
+ local mdsvdev=$(mdsvdevname 1)
+ local file=$DIR/$tfile
+ local mntpt=$(facet_mntpt $SINGLEMDS)
+ local used_xattr_blk=0
+ local inode_size=${1:-512}
+ local left_size=0
+ local xtest="trusted.test"
+ local value
+ local orig
+ local i
+
+ #Please see LU-6544 for MDT inode size calculation
+ if [ $OSTCOUNT -gt 26 ]; then
+ inode_size=2048
+ elif [ $OSTCOUNT -gt 5 ]; then
+ inode_size=1024
+ fi
+ left_size=$(expr $inode_size - \
+ 156 - \
+ 32 - \
+ 32 - $OSTCOUNT \* 24 - 16 - 3 - \
+ 24 - 16 - 3 - \
+ 24 - 18 - $(expr length $tfile) - 16 - 4)
+ if [ $left_size -le 0 ]; then
+ echo "No space($left_size) is expected in inode."
+ echo "Try 1-byte xattr instead to verify this."
+ left_size=1
+ else
+ echo "Estimate: at most $left_size-byte space left in inode."
+ fi
+
+ unload_modules
+ reformat
+
+ add mds1 $(mkfs_opts mds1 ${mdsdev}) --stripe-count-hint=$OSTCOUNT \
+ --reformat $mdsdev $mdsvdev || error "add mds1 failed"
+ start_mdt 1 > /dev/null || error "start mdt1 failed"
+ for i in $(seq $OSTCOUNT); do
+ start ost$i $(ostdevname $i) $OST_MOUNT_OPTS > /dev/null ||
+ error "start ost$i failed"
+ done
+ mount_client $MOUNT > /dev/null || error "mount client $MOUNT failed"
+ check_mount || error "check client $MOUNT failed"
+
+ #set xattr
+ $SETSTRIPE -c -1 $file || error "$SETSTRIPE -c -1 $file failed"
+ $GETSTRIPE $file || error "$GETSTRIPE $file failed"
+ i=$($GETSTRIPE -c $file)
+ if [ $i -ne $OSTCOUNT ]; then
+ left_size=$(expr $left_size + $(expr $OSTCOUNT - $i) \* 24)
+ echo -n "Since only $i out $OSTCOUNT OSTs are used, "
+ echo -n "the expected left space is changed to "
+ echo "$left_size bytes at most."
+ fi
+ value=$(generate_string $left_size)
+ setfattr -n $xtest -v $value $file
+ orig=$(get_xattr_value $xtest $file)
+ [[ "$orig" != "$value" ]] && error "$xtest changed"
+
+ #Verify if inode has some expected space left
+ umount $MOUNT > /dev/null || error "umount $MOUNT failed"
+ stop_mdt 1 > /dev/null || error "stop mdt1 failed"
+ mount_ldiskfs $SINGLEMDS || error "mount -t ldiskfs $SINGLEMDS failed"
+
+ do_facet $SINGLEMDS ls -sal $mntpt/ROOT/$tfile
+ used_xattr_blk=$(do_facet $SINGLEMDS ls -s $mntpt/ROOT/$tfile |
+ awk '{ print $1 }')
+ [[ $used_xattr_blk -eq 0 ]] &&
+ error "Please check MDS inode size calculation: \
+ more than $left_size-byte space left in inode."
+ echo "Verified: at most $left_size-byte space left in inode."
+
+ stopall
+}
+run_test 87 "check if MDT inode can hold EAs with N stripes properly"
+
+# $1 test directory
+# $2 (optional) value of max_mod_rpcs_in_flight to set
+check_max_mod_rpcs_in_flight() {
+ local dir="$1"
+ local mmr="$2"
+ local idx
+ local facet
+ local tmp
+ local i
+
+ idx=$(printf "%04x" $($LFS getdirstripe -i $dir))
+ facet="mds$((0x$idx + 1))"
+
+ if [ -z "$mmr" ]; then
+ # get value of max_mod_rcps_in_flight
+ mmr=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight) ||
+ error "Unable to get max_mod_rpcs_in_flight"
+ echo "max_mod_rcps_in_flight is $mmr"
+ else
+ # set value of max_mod_rpcs_in_flight
+ $LCTL set_param \
+ mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight=$mmr ||
+ error "Unable to set max_mod_rpcs_in_flight to $mmr"
+ echo "max_mod_rpcs_in_flight set to $mmr"
+ fi
+
+ # create mmr+1 files
+ echo "creating $((mmr + 1)) files ..."
+ umask 0022
+ for i in $(seq $((mmr + 1))); do
+ touch $dir/file-$i
+ done
+
+ ### part 1 ###
+
+ # consumes mmr-1 modify RPC slots
+ #define OBD_FAIL_MDS_REINT_MULTI_NET 0x159
+ # drop requests on MDT so that RPC slots are consumed
+ # during all the request resend interval
+ do_facet $facet "$LCTL set_param fail_loc=0x159"
+ echo "launch $((mmr - 1)) chmod in parallel ..."
+ for i in $(seq $((mmr - 1))); do
+ chmod 0600 $dir/file-$i &
+ done
+ sleep 1
+
+ # send one additional modify RPC
+ do_facet $facet "$LCTL set_param fail_loc=0"
+ echo "launch 1 additional chmod in parallel ..."
+ chmod 0600 $dir/file-$mmr &
+ sleep 1
+
+ # check this additional modify RPC get a modify RPC slot
+ # and succeed its operation
+ checkstat -vp 0600 $dir/file-$mmr ||
+ error "Unable to send $mmr modify RPCs in parallel"
+ wait
+
+ ### part 2 ###
+
+ # consumes mmr modify RPC slots
+ #define OBD_FAIL_MDS_REINT_MULTI_NET 0x159
+ # drop requests on MDT so that RPC slots are consumed
+ # during all the request resend interval
+ do_facet $facet "$LCTL set_param fail_loc=0x159"
+ echo "launch $mmr chmod in parallel ..."
+ for i in $(seq $mmr); do
+ chmod 0666 $dir/file-$i &
+ done
+ sleep 1
+
+ # send one additional modify RPC
+ do_facet $facet "$LCTL set_param fail_loc=0"
+ echo "launch 1 additional chmod in parallel ..."
+ chmod 0666 $dir/file-$((mmr + 1)) &
+ sleep 1
+
+ # check this additional modify RPC blocked getting a modify RPC slot
+ checkstat -vp 0644 $dir/file-$((mmr + 1)) ||
+ error "Unexpectedly send $(($mmr + 1)) modify RPCs in parallel"
+ wait
+}
+
+test_90a() {
+ reformat
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+ setup
+
+ [[ $($LCTL get_param mdc.*.import |
+ grep "connect_flags:.*multi_mod_rpc") ]] ||
+ { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+
+ # check default value
+ $LFS mkdir -c1 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+ check_max_mod_rpcs_in_flight $DIR/$tdir
+
+ cleanup
+}
+run_test 90a "check max_mod_rpcs_in_flight is enforced"
+
+test_90b() {
+ local idx
+ local facet
+ local tmp
+ local mmrpc
+
+ setup
+
+ [[ $($LCTL get_param mdc.*.import |
+ grep "connect_flags:.*multi_mod_rpc") ]] ||
+ { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+
+ ### test 1.
+ # update max_mod_rpcs_in_flight
+ $LFS mkdir -c1 $DIR/${tdir}1 || error "mkdir $DIR/${tdir}1 failed"
+ check_max_mod_rpcs_in_flight $DIR/${tdir}1 1
+
+ ### test 2.
+ # check client is able to send multiple modify RPCs in paralell
+ tmp=$($LCTL get_param -n mdc.$FSNAME-MDT*-mdc-*.import |
+ grep -c "multi_mod_rpcs")
+ if [ "$tmp" -ne $MDSCOUNT ]; then
+ echo "Client not able to send multiple modify RPCs in parallel"
+ cleanup
+ return
+ fi
+
+ # update max_mod_rpcs_in_flight
+ $LFS mkdir -c1 $DIR/${tdir}2 || error "mkdir $DIR/${tdir}2 failed"
+ check_max_mod_rpcs_in_flight $DIR/${tdir}2 5
+
+ ### test 3.
+ $LFS mkdir -c1 $DIR/${tdir}3 || error "mkdir $DIR/${tdir}3 failed"
+ idx=$(printf "%04x" $($LFS getdirstripe -i $DIR/${tdir}3))
+ facet="mds$((0x$idx + 1))"
+
+ # save MDT max_mod_rpcs_per_client
+ mmrpc=$(do_facet $facet \
+ cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
+
+ # update max_mod_rpcs_in_flight
+ umount_client $MOUNT
+ do_facet $facet \
+ "echo 16 > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+ mount_client $MOUNT
+ $LCTL set_param mdc.$FSNAME-MDT$idx-mdc-*.max_rpcs_in_flight=17
+ check_max_mod_rpcs_in_flight $DIR/${tdir}3 16
+
+ # restore MDT max_mod_rpcs_per_client initial value
+ do_facet $facet \
+ "echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+
+ rm -rf $DIR/${tdir}?
+ cleanup
+}
+run_test 90b "check max_mod_rpcs_in_flight is enforced after update"
+
+test_90c() {
+ local tmp
+ local mrif
+ local mmrpc
+
+ setup
+
+ [[ $($LCTL get_param mdc.*.import |
+ grep "connect_flags:.*multi_mod_rpc") ]] ||
+ { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+
+ # check client is able to send multiple modify RPCs in paralell
+ tmp=$($LCTL get_param -n mdc.$FSNAME-MDT*-mdc-*.import |
+ grep -c "multi_mod_rpcs")
+ if [ "$tmp" -ne $MDSCOUNT ]; then
+ skip "Client not able to send multiple modify RPCs in parallel"
+ cleanup
+ return
+ fi
+
+ # get max_rpcs_in_flight value
+ mrif=$($LCTL get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ echo "max_rpcs_in_flight is $mrif"
+
+ # get MDT max_mod_rpcs_per_client
+ mmrpc=$(do_facet mds1 \
+ cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
+ echo "max_mod_rpcs_per_client is $mmrpc"
+
+ # testcase 1
+ # attempt to set max_mod_rpcs_in_flight to max_rpcs_in_flight value
+ # prerequisite: set max_mod_rpcs_per_client to max_rpcs_in_flight value
+ umount_client $MOUNT
+ do_facet mds1 \
+ "echo $mrif > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+ mount_client $MOUNT
+
+ $LCTL set_param \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif &&
+ error "set max_mod_rpcs_in_flight to $mrif should fail"
+
+ umount_client $MOUNT
+ do_facet mds1 \
+ "echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+ mount_client $MOUNT
+
+ # testcase 2
+ # attempt to set max_mod_rpcs_in_flight to max_mod_rpcs_per_client+1
+ # prerequisite: set max_rpcs_in_flight to max_mod_rpcs_per_client+2
+ $LCTL set_param \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc + 2))
+
+ $LCTL set_param \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc + 1)) &&
+ error "set max_mod_rpcs_in_flight to $((mmrpc + 1)) should fail"
+
+ cleanup
+}
+run_test 90c "check max_mod_rpcs_in_flight update limits"
+
+test_90d() {
+ local idx
+ local facet
+ local mmr
+ local i
+ local pid
+
+ setup
+
+ [[ $($LCTL get_param mdc.*.import |
+ grep "connect_flags:.*multi_mod_rpc") ]] ||
+ { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+
+ $LFS mkdir -c1 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+ idx=$(printf "%04x" $($LFS getdirstripe -i $DIR/$tdir))
+ facet="mds$((0x$idx + 1))"
+
+ # check client version supports multislots
+ tmp=$($LCTL get_param -N \
+ mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight)
+ if [ -z "$tmp" ]; then
+ skip "Client does not support multiple modify RPCs in flight"
+ cleanup
+ return
+ fi
+
+ # get current value of max_mod_rcps_in_flight
+ mmr=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight)
+ echo "max_mod_rcps_in_flight is $mmr"
+
+ # create mmr files
+ echo "creating $mmr files ..."
+ umask 0022
+ for i in $(seq $mmr); do
+ touch $DIR/$tdir/file-$i
+ done
+
+ # prepare for close RPC
+ multiop_bg_pause $DIR/$tdir/file-close O_c
+ pid=$!
+
+ # consumes mmr modify RPC slots
+ #define OBD_FAIL_MDS_REINT_MULTI_NET 0x159
+ # drop requests on MDT so that RPC slots are consumed
+ # during all the request resend interval
+ do_facet $facet "$LCTL set_param fail_loc=0x159"
+ echo "launch $mmr chmod in parallel ..."
+ for i in $(seq $mmr); do
+ chmod 0600 $DIR/$tdir/file-$i &
+ done
+
+ # send one additional close RPC
+ do_facet $facet "$LCTL set_param fail_loc=0"
+ echo "launch 1 additional close in parallel ..."
+ kill -USR1 $pid
+ cancel_lru_locks mdc
+ sleep 1
+
+ # check this additional close RPC get a modify RPC slot
+ # and multiop process completed
+ [ -d /proc/$pid ] &&
+ error "Unable to send the additional close RPC in parallel"
+ wait
+ rm -rf $DIR/$tdir
+ cleanup
+}
+run_test 90d "check one close RPC is allowed above max_mod_rpcs_in_flight"
+
+check_uuid_on_ost() {
+ local nid=$1
+ do_facet ost1 "$LCTL get_param obdfilter.${FSNAME}*.exports.'$nid'.uuid"
+}
+
+check_uuid_on_mdt() {
+ local nid=$1
+ do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.'$nid'.uuid"
+}
+
+test_91() {
+ local uuid
+ local nid
+ local found
+
+ load_modules
+
+ [[ $(lustre_version_code ost1) -ge $(version_code 2.7.63) ]] ||
+ { skip "Need OST version at least 2.7.63" && return 0; }
+ [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.63) ]] ||
+ { skip "Need MDT version at least 2.7.63" && return 0; }
+
+ start_mds || error "MDS start failed"
+ start_ost || error "unable to start OST"
+ mount_client $MOUNT || error "client start failed"
+ check_mount || error "check_mount failed"
+
+ if remote_mds; then
+ nid=$($LCTL list_nids | head -1 | sed "s/\./\\\./g")
+ else
+ nid="0@lo"
+ fi
+ uuid=$(get_client_uuid $MOUNT)
+
+ echo "list nids on mdt:"
+ do_facet $SINGLEMDS "$LCTL list_param mdt.${FSNAME}*.exports.*"
+ echo "uuid from $nid:"
+ do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.'$nid'.uuid"
+
+ found=$(check_uuid_on_mdt $nid | grep $uuid)
+ [ -z "$found" ] && error "can't find $uuid $nid on MDT"
+ found=$(check_uuid_on_ost $nid | grep $uuid)
+ [ -z "$found" ] && error "can't find $uuid $nid on OST"
+
+ # umount the client so it won't reconnect
+ manual_umount_client --force || error "failed to umount $?"
+ # shouldn't disappear on MDS after forced umount
+ found=$(check_uuid_on_mdt $nid | grep $uuid)
+ [ -z "$found" ] && error "can't find $uuid $nid"
+
+ echo "evict $nid"
+ do_facet $SINGLEMDS \
+ "$LCTL set_param -n mdt.${mds1_svc}.evict_client nid:$nid"
+
+ found=$(check_uuid_on_mdt $nid | grep $uuid)
+ [ -n "$found" ] && error "found $uuid $nid on MDT"
+ found=$(check_uuid_on_ost $nid | grep $uuid)
+ [ -n "$found" ] && error "found $uuid $nid on OST"
+
+ # check it didn't reconnect (being umounted)
+ sleep $((TIMEOUT+1))
+ found=$(check_uuid_on_mdt $nid | grep $uuid)
+ [ -n "$found" ] && error "found $uuid $nid on MDT"
+ found=$(check_uuid_on_ost $nid | grep $uuid)
+ [ -n "$found" ] && error "found $uuid $nid on OST"
+
+ cleanup
+}
+run_test 91 "evict-by-nid support"
if ! combined_mgs_mds ; then
stop mgs