3 # Declare rpmbuild --with/--without parameters
7 %bcond_without lustre_tests
8 %bcond_without lustre_iokit
10 %if %{without servers}
11 # --without servers overrides --with {ldiskfs|zfs}
12 # so undefine the internal variables set by bcond_*
13 %undefine with_ldiskfs
17 %{!?version: %global version @VERSION@}
18 %{!?kver: %global kver ""}
19 %{!?kdir: %global kdir %(dir=$(echo "%configure_args" | sed -ne 's/.*--with-linux=\\([^ ][^ ]*\\).*$/\\1/p'); if [ -n "$dir" ]; then echo "$dir"; else if [ -n "%kver" ]; then kversion="%kver"; else kversion="$(uname -r)"; fi; echo "/lib/modules/$kversion/source"; fi)}
21 %{!?kobjdir: %global kobjdir %(dir=$(echo "%configure_args" | sed -ne 's/.*--with-linux-obj=\\([^ ][^ ]*\\).*$/\\1/p'); if [ -n "$dir" ]; then echo "$dir"; else if [ -n "%kver" ]; then kversion="%kver"; else kversion="$(uname -r)"; fi; if [ "%kdir" = "/lib/modules/$kversion/source" ]; then echo "/lib/modules/$kversion/build"; else echo "%kdir"; fi; fi)}
23 # as an alternative to this implementation we could simply "make -C $kdir kernelversion"
24 %{!?kversion: %global kversion %(if test -s %kobjdir/include/generated/utsrelease.h ; then LINUXRELEASEHEADER=%kobjdir/include/generated/utsrelease.h ; elif test -s %kobjdir/include/linux/utsrelease.h ; then LINUXRELEASEHEADER=%kobjdir/include/linux/utsrelease.h ; else LINUXRELEASEHEADER=%kobjdir/include/linux/version.h; fi; sed -ne '/^#define UTS_RELEASE/s/.*"\\(.*\\)"$/\\1/p' $LINUXRELEASEHEADER)}
26 %{!?downstream_release: %global downstream_release "@DOWNSTREAM_RELEASE@"}
28 %define buildid %(if [ -n "@BUILDID@" ]; then echo "_@BUILDID@"; fi)
30 %{!?myrelease: %global myrelease %(if [ -n "%downstream_release" ]; then echo -n "%{downstream_release}_"; fi; echo %kversion | tr '-' '_')}
32 # always append the buildid, even when the caller defines %release
33 %define fullrelease %{myrelease}%{buildid}
35 # in order to get kernel symset and/or kernel module dependencies into
36 # the RPM, in order to support weak-modules, the internal dependency gen-
37 # erator needs to be disabled
38 # this is done with (reduce the double % down to a single %):
40 # %%global _use_internal_dependency_generator 0
42 # on SLES10, /usr/lib/rpm/macros already sets this, so no harm in also
43 # defining it here (until Suse changes their mind)
45 # on RHEL5, however, we do need to explicitly disable the internal dep-
46 # endency generator and allow the external one be used
47 # but since RedHat's kABI is only a subset of the total kernel ABI, it
48 # doesn't include all of the symbols we (or OFED for that matter) need
49 # until RedHat includes all of the symbols we need in their symsets we
50 # cannot support weak-modules
51 # we did e-mail the maintainer of all of this stuff @redhat but got no
53 #%%global _use_internal_dependency_generator 0
55 # for those uses that don't want the -smp/-bigsmp (or the .arch) on the end
57 %define krequires %(bash -c "echo %{kversion} | sed -e 's/\.x86_64$//' -e 's/\.i[3456]86$//' -e 's/-smp$//' -e 's/-bigsmp$//' -e 's/-ppc64$//' -e 's/-default$//'")
59 # Set the package name prefix
60 %if %{undefined lustre_name}
62 %global lustre_name lustre
64 %global lustre_name lustre-client
68 %if %{defined cross_path} && %{defined post_script}
69 %define rpm_post_base %(echo $(dirname %{cross_path})/%{lustre_name})
72 Summary: Lustre File System
75 Release: %{fullrelease}
77 Group: Utilities/System
78 Source: lustre-%{version}.tar.gz
79 URL: http://wiki.whamcloud.com/
80 BuildRoot: %{_tmppath}/lustre-%{version}-root
81 Obsoletes: lustre-lite, lustre-lite-utils, lustre-ldap nfs-utils-lustre
82 Provides: lustre-lite = %{version}, lustre-lite-utils = %{version}
83 Requires: %{name}-modules = %{version}
87 %if %{defined cross_requires}
88 Requires: %{cross_requires}
91 # GSS requires this: BuildRequires: pkgconfig, libgssapi-devel >= 0.10
92 %if %{_vendor}=="redhat" || %{_vendor}=="fedora"
93 #suse don't support selinux
94 BuildRequires: libselinux-devel
100 Userspace tools and files for the Lustre file system.
103 Summary: Kernel Lustre modules for Linux %{kversion}
104 %if %{defined cross_requires}
105 Requires: %{cross_requires}
108 # for SLES11, we need nothing here
109 %if %{_vendor}=="redhat" || %{_vendor}=="fedora"
110 # for RHEL we need to require the specific kernel still since weak-modules
111 # support on RH is, well, weak, to be punny about it
112 Requires: kernel = %{krequires}
115 Group: Development/Kernel
118 Lustre file system, server and network drivers for Linux %{kversion}.
122 Summary: osd-ldiskfs contains both ldiskfs and its osd interface in Lustre.
123 Requires: lustre-modules = %{version}
124 Requires: modutils >= 2.4.10
125 Requires: ldiskfsprogs >= 1.42.7.wc1
127 Obsoletes: lustre-ldiskfs
128 Group: Development/Kernel
130 %description osd-ldiskfs
131 The Lustre Object Storage Device (OSD) API is the interface to access and
132 modify data that is supposed to be stored persistently. This API is the interface
133 to code that bridges individual file systems. This specific package provides an
134 implementation of the OSD API for using the Ldiskfs filesystem as the underlying
135 backing store of a Lustre server.
140 Summary: osd-zfs is the mandatory glue for ZFS support in Lustre.
141 Requires: lustre-modules = %{version}, zfs-kmod
143 Group: Development/Kernel
146 The Lustre Object Storage Device (OSD) API is the interface to access and
147 modify data that is supposed to be stored persistently. This API is the interface
148 to code that bridges individual file systems. This specific package provides an
149 implementation of the OSD API for using the ZFS filesystem as the underlying
150 backing store of a Lustre server.
154 Summary: Object-Based Disk storage driver source
155 Group: Development/Kernel
158 Lustre sources for further development
160 # Since the RPMs we ship are to be used on both SLES and RHEL, we
161 # can't include any dependency information (since the package names
162 # are different on the two platforms).
164 # Instead, we can build these empty meta-packages that only include
165 # dependency information. These let people get the correct
166 # dependencies for their platform and lets them use tools like yum and
167 # red carpet to install the correct files.
169 # Unfortunately I have not seen this come up on the lists much, so I
170 # have disabled them (by commenting out their empty files section
171 # below) until it's clear that they resolve more confusion than they
175 Summary: Lustre dependencies meta-package for SLES
176 Group: Utilities/System
177 Provides: lustre-deps = %{version}
178 Requires: %{name} = %{version}, sles-release
179 Conflicts: %{name}-deps-rhel
181 %description deps-sles
182 This package has RPM dependencies appropriate for SLES systems.
185 Summary: Lustre dependencies meta-package for RHEL
186 Group: Utilities/System
187 Provides: lustre-deps = %{version}
188 Requires: %{name} = %{version}, redhat-release
189 Conflicts: %{name}-deps-sles
191 %description deps-rhel
192 This package has RPM dependencies appropriate for RHEL, RHL, and FC
196 Summary: Lustre testing framework
197 Group: Development/Kernel
198 Provides: %{name}-tests = %{version}
199 Requires: %{name} = %{version}, %{name}-modules = %{version}, lustre-iokit
202 This package contains a set of test binaries and scripts that are intended
203 to be used by the Lustre testing framework.
205 %if %{with lustre_iokit}
206 %package -n lustre-iokit
207 Summary: The Lustre IO-Kit is a collection of benchmark tools for a cluster with the Lustre file system.
208 Group: Applications/System
209 Requires: python > 2.2, sg3_utils
211 %description -n lustre-iokit
212 This package includes five tools:
214 A test of the 'bare metal' performance, bypassing as much of the kernel as we can. Uses the sgp_dd utility.
217 This survey can be run in 3 modes to test disk I/O including the filesystem,
218 network I/O, and disk I/O via the network. The script does sequential I/O
219 with varying numbers of threads and objects (files) by using lctl::test_brw
220 to drive the echo_client connected to local or remote obdfilter instances,
221 or remote obdecho instances.
224 This survey tests the client-to-disk performance of individual OSTs, and
225 ranks then for comparison.
228 This script will collect IO stats on a defined set of nodes.
231 A script to run the IOR benchmark. The latest version can be downloaded from
232 http://www.llnl.gov/asci/purple/benchmarks/limited/ior/
235 This survey tests the local metadata performance using the echo_client to drive
236 the MDD layer to perform operations. It is run with multiple threads (to
237 simulate MDT service threads) locally on the MDS node, and does not need Lustre
238 clients in order to run
241 %if 0%{?suse_version}
245 %setup -qn lustre-%{version}
246 ln lustre/ChangeLog ChangeLog-lustre
247 ln lnet/ChangeLog ChangeLog-lnet
250 # if RPM_BUILD_NCPUS unset, set it
251 if [ -z "$RPM_BUILD_NCPUS" ] ; then
252 RPM_BUILD_NCPUS=$(egrep -c "^cpu[0-9]+" /proc/stat 2>/dev/null || echo 0 :)
253 if [ $RPM_BUILD_NCPUS -eq 0 ] ; then
256 if [ $RPM_BUILD_NCPUS -gt 8 ] ; then
261 # Set an explicit path to our Linux tree, if we can.
262 cd $RPM_BUILD_DIR/lustre-%{version}
263 # override %optflags so that the vendor's overzealous flags don't create
265 %define optflags -g -O2 -Werror
266 CONFIGURE_ARGS="%{?configure_args} --with-release=%release"
267 %if %{with lustre_tests}
268 CONFIGURE_ARGS="$CONFIGURE_ARGS --enable-tests --enable-liblustre-tests"
270 CONFIGURE_ARGS="$CONFIGURE_ARGS --disable-tests --disable-liblustre-tests"
272 %if %{without lustre_iokit}
273 CONFIGURE_ARGS="$CONFIGURE_ARGS --disable-iokit"
276 # if %%kdir was given, make sure it's not in the configure arguments
277 if [ -n "%kdir" ]; then
278 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-linux=[^ ][^ ]* \?//')
280 # ditto for %%kobjdir
281 if [ -n "%kobjdir" ]; then
282 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-linux-obj=[^ ][^ ]* \?//')
285 # we need to eval "configure" because $CONFIGURE_ARGS could have a quoted
286 # string in it which we don't want word splitted by the shell
287 # also remove (build|host|target) options because they will be specified
288 # inside $CONFIGURE_ARGS
289 %define eval_configure %(echo '%configure' | sed -e 's#\./configure#eval ./configure#' -e 's/--\\(build\\|host\\|target\\)=[^ ][^ ]* //g')
292 %{?kdir: --with-linux=%kdir} %{?kobjdir: --with-linux-obj=%kobjdir} \
294 make -j $RPM_BUILD_NCPUS -s %{?make_args}
297 make install DESTDIR=$RPM_BUILD_ROOT
298 # hack to avoid changing the libsysio code for "make install"
299 rm -f $RPM_BUILD_ROOT%{_libdir}/libsysio.a
301 # The .ha_v2 extension identifies the heartbeat resource agent as using
302 # legacy syntax. Install a compatibility symlink to avoid conflicts when
303 # newer-style agents are added.
304 ln -s Lustre.ha_v2 $RPM_BUILD_ROOT%{_sysconfdir}/ha.d/resource.d/Lustre
306 # Create the pristine source directory.
307 cd $RPM_BUILD_DIR/lustre-%{version}
308 mkdir -p $RPM_BUILD_ROOT%{_prefix}/src
310 ln -s $RPM_BUILD_ROOT%{_prefix}/src lustre-source
311 make distdir distdir=lustre-source/lustre-%{version}
312 chmod -R go-w lustre-source/lustre-%{version}
313 # fc18 needs 'x' permission for library files
314 find $RPM_BUILD_ROOT -name '*.so' | xargs chmod +x
316 cat >lustre.files <<EOF
317 %{?rootdir}/sbin/mount.lustre
320 %{_bindir}/lfs_migrate
324 %{_bindir}/lustre_req_history
325 %{_bindir}/plot-llstat
326 %{_bindir}/req_layout
327 %{_libdir}/libptlctl.a
328 %{_libdir}/liblustreapi.a
329 %{_libdir}/liblustreapi.so
332 %{_includedir}/lustre
333 %{_includedir}/libcfs
334 %{_libexecdir}/lustre/lc_common
335 %{_sysconfdir}/udev/rules.d/99-lustre.rules
336 %{_sysconfdir}/init.d/lnet
337 %{_sysconfdir}/init.d/lustre
338 %config(noreplace) %{_sysconfdir}/ldev.conf
339 %{_sysconfdir}/sysconfig/lustre
340 %{_libexecdir}/lustre/haconfig
341 %{_sysconfdir}/ha.d/resource.d/Lustre.ha_v2
342 %{_sysconfdir}/ha.d/resource.d/Lustre
345 if [ -f $RPM_BUILD_ROOT%{_libdir}/libcfsutil.a ] ; then
346 echo '%{_libdir}/libcfsutil.a' >>lustre.files
349 if [ -f $RPM_BUILD_ROOT%{_libdir}/liblustre.so ] ; then
350 echo '%{_libdir}/liblustre.a' >>lustre.files
351 echo '%{_libdir}/liblustre.so' >>lustre.files
354 if [ -f $RPM_BUILD_ROOT%{_libdir}/libiam.a ] ; then
355 echo '%{_libdir}/libiam.a' >>lustre.files
358 if [ -d $RPM_BUILD_ROOT%{_libdir}/lustre/snmp ] ; then
359 echo '%{_libdir}/lustre/snmp' >>lustre.files
360 echo '%{_datadir}/lustre/snmp/mibs' >>lustre.files
363 # Have universal lustre headers
364 if [ -f $RPM_BUILD_DIR/lustre-%{version}/lustre/include/lustre/lustre_idl.h ] ; then
365 echo '%{_includedir}/linux/lustre_user.h' >>lustre.files
367 echo '%{_includedir}/linux/lustre_idl.h' >>lustre.files
370 if [ -f $RPM_BUILD_DIR/lustre-%{version}/lustre/include/linux/lustre_types.h ] ; then
371 echo '%{_includedir}/linux/lustre_types.h' >>lustre.files
374 %if %{with lustre_tests}
375 echo '%{_libdir}/lustre/tests/*' >lustre-tests.files
376 echo '%{_bindir}/mcreate' >>lustre-tests.files
377 echo '%{_bindir}/munlink' >>lustre-tests.files
378 echo '%{?rootdir}/lib/modules/%{kversion}/updates/kernel/fs/lustre/llog_test.ko' >>lustre-tests.files
379 if [ -d $RPM_BUILD_ROOT%{_libdir}/lustre/liblustre/tests ] ; then
380 echo '%{_libdir}/lustre/liblustre/tests/*' >>lustre-tests.files
384 %if %{defined cross_path}
385 %if %{defined rpm_post_base}
386 POST_SCRIPT=$RPM_BUILD_DIR/lustre-%{version}/%{post_script}
387 if [ -f $POST_SCRIPT ]; then
388 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}.sh
389 echo '%attr(0555, root, root) %{rpm_post_base}.sh' >>lustre.files
390 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-modules.sh
392 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-osd-ldiskfs.sh
395 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-osd-zfs.sh
397 %if %{with lustre_tests}
398 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-tests.sh
399 echo '%attr(0555, root, root) %{rpm_post_base}-tests.sh' >>lustre-tests.files
404 # mark modules executable for find-debuginfo.sh
405 find $RPM_BUILD_ROOT%{?rootdir}/lib/modules/%{kversion}/updates -name "*.ko" -type f | \
406 xargs --no-run-if-empty chmod u+x
409 %files -f lustre.files
410 %defattr(-,root,root)
413 %defattr(-,root,root)
414 %{?rootdir}/lib/modules/%{kversion}/updates/*
415 %if %{with lustre_tests}
416 %exclude %{?rootdir}/lib/modules/%{kversion}/updates/kernel/fs/lustre/llog_test.ko
419 %exclude %{?rootdir}/lib/modules/%{kversion}/updates/kernel/fs/lustre/ldiskfs.ko
420 %exclude %{?rootdir}/lib/modules/%{kversion}/updates/kernel/fs/lustre/osd_ldiskfs.ko
423 %exclude %{?rootdir}/lib/modules/%{kversion}/updates/kernel/fs/lustre/osd_zfs.ko
425 %if %{defined rpm_post_base}
426 %attr(0555, root, root) %{rpm_post_base}-modules.sh
429 %doc ChangeLog-lustre
434 %defattr(-,root,root)
435 %{?rootdir}/lib/modules/%{kversion}/updates/kernel/fs/lustre/ldiskfs.ko
436 %{?rootdir}/lib/modules/%{kversion}/updates/kernel/fs/lustre/osd_ldiskfs.ko
437 %if %{defined rpm_post_base}
438 %attr(0555, root, root) %{rpm_post_base}-osd-ldiskfs.sh
444 %defattr(-,root,root)
445 %{?rootdir}/lib/modules/%{kversion}/updates/kernel/fs/lustre/osd_zfs.ko
446 %if %{defined rpm_post_base}
447 %attr(0555, root, root) %{rpm_post_base}-osd-zfs.sh
452 %defattr(-,root,root)
453 %{_prefix}/src/lustre-%{version}
455 # uncomment these lines to enable deps packages
459 %if %{with lustre_tests}
460 %files tests -f lustre-tests.files
461 %defattr(-,root,root)
464 %if %{with lustre_iokit}
465 %files -n lustre-iokit
466 %defattr(-, root, root)
467 %{_bindir}/ior-survey
470 %{_bindir}/obdfilter-survey
471 %{_bindir}/plot-obdfilter
473 %{_bindir}/ost-survey
474 %{_bindir}/sgpdd-survey
475 %{_bindir}/plot-sgpdd
477 %{_bindir}/gather_stats_everywhere.sh
479 %{_bindir}/mds-survey
480 %doc lustre-iokit/obdfilter-survey/README.obdfilter-survey
481 %doc lustre-iokit/ior-survey/README.ior-survey
482 %doc lustre-iokit/ost-survey/README.ost-survey
483 %doc lustre-iokit/mds-survey/README.mds-survey
484 %doc lustre-iokit/sgpdd-survey/README.sgpdd-survey
485 %doc lustre-iokit/stats-collect/README.lstats.sh
488 %if %{defined rpm_post_base}
490 if [ -x %{rpm_post_base}.sh ]; then
491 %{rpm_post_base}.sh %{cross_path} create
495 if [ -x %{rpm_post_base}.sh ]; then
496 %{rpm_post_base}.sh %{cross_path} remove
501 %if %{defined rpm_post_base}
502 if [ -x %{rpm_post_base}-modules.sh ]; then
503 %{rpm_post_base}-modules.sh %{cross_path} create
506 if [ -f /boot/System.map-%{kversion} ]; then
507 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
509 depmod -ae %{kversion} || exit 0
512 MODULES_RPM_NAME=$(rpm -q %{name}-modules | grep "%{version}-%{release}")
513 # "weak modules" support
515 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
516 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' |
517 /usr/lib/module-init-tools/weak-modules --add-modules
520 if [ -x /sbin/weak-modules ]; then
521 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' |
522 /sbin/weak-modules --add-modules
525 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
526 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
527 # print a warning so that users are aware of this issue.
528 if sysctl kernel.unsupported >/dev/null 2>&1 &&
529 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
530 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
532 warning: the Lustre modules are not supported by Novell. To use Lustre
533 on this system, you should put
535 allow_unsupported_modules 1
537 into /etc/modprobe.d/unsupported_modules"
543 %if %{defined rpm_post_base}
544 if [ -x %{rpm_post_base}-osd-ldiskfs.sh ]; then
545 %{rpm_post_base}-osd-ldiskfs.sh %{cross_path} create
548 if [ -f /boot/System.map-%{kversion} ]; then
549 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
551 depmod -ae %{kversion} || exit 0
554 OSD_LDISKFS_RPM_NAME=$(rpm -q %{name}-osd-ldiskfs | grep "%{version}-%{release}")
555 # "weak modules" support
557 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
558 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' |
559 /usr/lib/module-init-tools/weak-modules --add-modules
562 if [ -x /sbin/weak-modules ]; then
563 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' |
564 /sbin/weak-modules --add-modules
567 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
568 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
569 # print a warning so that users are aware of this issue.
570 if sysctl kernel.unsupported >/dev/null 2>&1 &&
571 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
572 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
574 warning: the Lustre modules are not supported by Novell. To use Lustre
575 on this system, you should put
577 allow_unsupported_modules 1
579 into /etc/modprobe.d/unsupported_modules"
586 %if %{defined rpm_post_base}
587 if [ -x %{rpm_post_base}-osd-zfs.sh ]; then
588 %{rpm_post_base}-osd-zfs.sh %{cross_path} create
591 if [ -f /boot/System.map-%{kversion} ]; then
592 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
594 depmod -ae %{kversion} || exit 0
597 OSD_ZFS_RPM_NAME=$(rpm -q %{name}-osd-zfs | grep "%{version}-%{release}")
598 # "weak modules" support
600 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
601 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' |
602 /usr/lib/module-init-tools/weak-modules --add-modules
605 if [ -x /sbin/weak-modules ]; then
606 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' |
607 /sbin/weak-modules --add-modules
610 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
611 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
612 # print a warning so that users are aware of this issue.
613 if sysctl kernel.unsupported >/dev/null 2>&1 &&
614 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
615 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
617 warning: the Lustre modules are not supported by Novell. To use Lustre
618 on this system, you should put
620 allow_unsupported_modules 1
622 into /etc/modprobe.d/unsupported_modules"
628 %if %{defined rpm_post_base}
629 if [ -x %{rpm_post_base}-modules.sh ]; then
630 %{rpm_post_base}-modules.sh %{cross_path} remove
633 MODULES_RPM_NAME=$(rpm -q %{name}-modules | grep "%{version}-%{release}")
634 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' > /var/run/%{name}-modules || true
639 %if %{defined rpm_post_base}
640 if [ -x %{rpm_post_base}-osd-ldiskfs.sh ]; then
641 %{rpm_post_base}-osd-ldiskfs.sh %{cross_path} remove
644 OSD_LDISKFS_RPM_NAME=$(rpm -q %{name}-osd-ldiskfs | grep "%{version}-%{release}")
645 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' > /var/run/%{name}-osd-ldiskfs || true
651 %if %{defined rpm_post_base}
652 if [ -x %{rpm_post_base}-osd-zfs.sh ]; then
653 %{rpm_post_base}-osd-zfs.sh %{cross_path} remove
656 OSD_ZFS_RPM_NAME=$(rpm -q %{name}-osd-zfs | grep "%{version}-%{release}")
657 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' > /var/run/%{name}-osd-zfs || true
661 %if %{undefined cross_path}
663 if [ -f /boot/System.map-%{kversion} ]; then
664 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
666 depmod -ae %{kversion} || exit 0
669 # "weak modules" support
671 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
672 cat /var/run/%{name}-modules |
673 /usr/lib/module-init-tools/weak-modules --remove-modules
676 if [ -x /sbin/weak-modules ]; then
677 cat /var/run/%{name}-modules |
678 /sbin/weak-modules --remove-modules
680 rm /var/run/%{name}-modules
684 if [ -f /boot/System.map-%{kversion} ]; then
685 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
687 depmod -ae %{kversion} || exit 0
690 # "weak modules" support
692 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
693 cat /var/run/%{name}-osd-ldiskfs |
694 /usr/lib/module-init-tools/weak-modules --remove-modules
697 if [ -x /sbin/weak-modules ]; then
698 cat /var/run/%{name}-osd-ldiskfs |
699 /sbin/weak-modules --remove-modules
701 rm /var/run/%{name}-osd-ldiskfs
706 if [ -f /boot/System.map-%{kversion} ]; then
707 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
709 depmod -ae %{kversion} || exit 0
712 # "weak modules" support
714 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
715 cat /var/run/%{name}-osd-zfs |
716 /usr/lib/module-init-tools/weak-modules --remove-modules
719 if [ -x /sbin/weak-modules ]; then
720 cat /var/run/%{name}-osd-zfs |
721 /sbin/weak-modules --remove-modules
723 rm /var/run/%{name}-osd-zfs
727 %if %{with lustre_tests}
729 %if %{defined rpm_post_base}
730 if [ -x %{rpm_post_base}-tests.sh ]; then
731 %{rpm_post_base}-tests.sh %{cross_path} create
735 if [ -x %{rpm_post_base}-tests.sh ]; then
736 %{rpm_post_base}-tests.sh %{cross_path} remove
739 if [ -f /boot/System.map-%{kversion} ]; then
740 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
742 depmod -ae %{kversion} || exit 0
746 if [ -f /boot/System.map-%{kversion} ]; then
747 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
749 depmod -ae %{kversion} || exit 0
755 rm -rf $RPM_BUILD_ROOT