3 # Declare rpmbuild --with/--without parameters
7 %bcond_without lustre_tests
8 %bcond_without lustre_iokit
10 %if %{without servers}
11 # --without servers overrides --with {ldiskfs|zfs}
12 # so undefine the internal variables set by bcond_*
13 %undefine with_ldiskfs
17 %{!?version: %global version @VERSION@}
18 %{!?kver: %global kver ""}
19 %{!?kdir: %global kdir %(dir=$(echo "%configure_args" | sed -ne 's/.*--with-linux=\\([^ ][^ ]*\\).*$/\\1/p'); if [ -n "$dir" ]; then echo "$dir"; else if [ -n "%kver" ]; then kversion="%kver"; else kversion="$(uname -r)"; fi; echo "/lib/modules/$kversion/source"; fi)}
21 %{!?kobjdir: %global kobjdir %(dir=$(echo "%configure_args" | sed -ne 's/.*--with-linux-obj=\\([^ ][^ ]*\\).*$/\\1/p'); if [ -n "$dir" ]; then echo "$dir"; else if [ -n "%kver" ]; then kversion="%kver"; else kversion="$(uname -r)"; fi; if [ "%kdir" = "/lib/modules/$kversion/source" ]; then echo "/lib/modules/$kversion/build"; else echo "%kdir"; fi; fi)}
23 # as an alternative to this implementation we could simply "make -C $kdir kernelversion"
24 %{!?kversion: %global kversion %(if test -s %kobjdir/include/generated/utsrelease.h ; then LINUXRELEASEHEADER=%kobjdir/include/generated/utsrelease.h ; elif test -s %kobjdir/include/linux/utsrelease.h ; then LINUXRELEASEHEADER=%kobjdir/include/linux/utsrelease.h ; else LINUXRELEASEHEADER=%kobjdir/include/linux/version.h; fi; sed -ne '/^#define UTS_RELEASE/s/.*"\\(.*\\)"$/\\1/p' $LINUXRELEASEHEADER)}
26 %{!?downstream_release: %global downstream_release "@DOWNSTREAM_RELEASE@"}
28 %define buildid %(if [ -n "@BUILDID@" ]; then echo "_@BUILDID@"; fi)
30 %{!?myrelease: %global myrelease %(if [ -n "%downstream_release" ]; then echo -n "%{downstream_release}_"; fi; echo %kversion | tr '-' '_')}
32 # always append the buildid, even when the caller defines %release
33 %define fullrelease %{myrelease}%{buildid}
35 # in order to get kernel symset and/or kernel module dependencies into
36 # the RPM, in order to support weak-modules, the internal dependency gen-
37 # erator needs to be disabled
38 # this is done with (reduce the double % down to a single %):
40 # %%global _use_internal_dependency_generator 0
42 # on SLES10, /usr/lib/rpm/macros already sets this, so no harm in also
43 # defining it here (until Suse changes their mind)
45 # on RHEL5, however, we do need to explicitly disable the internal dep-
46 # endency generator and allow the external one be used
47 # but since RedHat's kABI is only a subset of the total kernel ABI, it
48 # doesn't include all of the symbols we (or OFED for that matter) need
49 # until RedHat includes all of the symbols we need in their symsets we
50 # cannot support weak-modules
51 # we did e-mail the maintainer of all of this stuff @redhat but got no
53 #%%global _use_internal_dependency_generator 0
55 # for those uses that don't want the -smp/-bigsmp (or the .arch) on the end
57 %define krequires %(bash -c "echo %{kversion} | sed -e 's/\.x86_64$//' -e 's/\.i[3456]86$//' -e 's/-smp$//' -e 's/-bigsmp$//' -e 's/-ppc64$//' -e 's/-default$//'")
59 %define sles10 %(bash -c "if [ "%sles_version" = "10" ]; then echo -n '1'; else echo -n '0'; fi")
62 %define flavor %(bash -c "echo %{kversion} | sed -e 's/^.*-//'")
65 # Set the package name prefix
66 %if %{undefined lustre_name}
68 %global lustre_name lustre
70 %global lustre_name lustre-client
74 %if %{undefined kmoddir}
75 %if %{defined kernel_module_package_moddir}
76 %global kmoddir %{kernel_module_package_moddir}
78 %if %{defined suse_kernel_module_package}
79 %global kmoddir updates
86 %if %{defined cross_path} && %{defined post_script}
87 %define rpm_post_base %(echo $(dirname %{cross_path})/%{lustre_name})
90 Summary: Lustre File System
93 Release: %{fullrelease}
95 Group: Utilities/System
96 Source: lustre-%{version}.tar.gz
97 URL: http://wiki.whamcloud.com/
98 BuildRoot: %{_tmppath}/lustre-%{version}-root
99 Obsoletes: lustre-lite, lustre-lite-utils, lustre-ldap nfs-utils-lustre
100 Provides: lustre-lite = %{version}, lustre-lite-utils = %{version}
101 Requires: %{name}-modules = %{version}
102 BuildRequires: libtool
106 %if %{defined cross_requires}
107 Requires: %{cross_requires}
110 # GSS requires this: BuildRequires: pkgconfig, libgssapi-devel >= 0.10
111 %if %{_vendor}=="redhat" || %{_vendor}=="fedora"
112 #suse don't support selinux
113 BuildRequires: libselinux-devel
119 Userspace tools and files for the Lustre file system.
122 Summary: Kernel Lustre modules for Linux %{kversion}
123 %if %{defined cross_requires}
124 Requires: %{cross_requires}
127 # for SLES11, we need nothing here
128 # for SLES10, we need (where %{flavor} is, i.e. smp):
130 Requires: kernel-%{flavor}
132 %if %{_vendor}=="redhat" || %{_vendor}=="fedora"
133 # for RHEL we need to require the specific kernel still since weak-modules
134 # support on RH is, well, weak, to be punny about it
135 Requires: kernel = %{krequires}
139 Group: Development/Kernel
142 Lustre file system, server and network drivers for Linux %{kversion}.
146 Summary: osd-ldiskfs contains both ldiskfs and its osd interface in Lustre.
147 Requires: lustre-modules = %{version}
148 Requires: modutils >= 2.4.10
149 Requires: ldiskfsprogs >= 1.42.7.wc1
151 Obsoletes: lustre-ldiskfs
152 Group: Development/Kernel
154 %description osd-ldiskfs
155 The Lustre Object Storage Device (OSD) API is the interface to access and
156 modify data that is supposed to be stored persistently. This API is the interface
157 to code that bridges individual file systems. This specific package provides an
158 implementation of the OSD API for using the Ldiskfs filesystem as the underlying
159 backing store of a Lustre server.
164 Summary: osd-zfs is the mandatory glue for ZFS support in Lustre.
165 Requires: lustre-modules = %{version}, zfs-kmod
167 Group: Development/Kernel
170 The Lustre Object Storage Device (OSD) API is the interface to access and
171 modify data that is supposed to be stored persistently. This API is the interface
172 to code that bridges individual file systems. This specific package provides an
173 implementation of the OSD API for using the ZFS filesystem as the underlying
174 backing store of a Lustre server.
178 Summary: Object-Based Disk storage driver source
179 Group: Development/Kernel
182 Lustre sources for further development
184 # Since the RPMs we ship are to be used on both SLES and RHEL, we
185 # can't include any dependency information (since the package names
186 # are different on the two platforms).
188 # Instead, we can build these empty meta-packages that only include
189 # dependency information. These let people get the correct
190 # dependencies for their platform and lets them use tools like yum and
191 # red carpet to install the correct files.
193 # Unfortunately I have not seen this come up on the lists much, so I
194 # have disabled them (by commenting out their empty files section
195 # below) until it's clear that they resolve more confusion than they
199 Summary: Lustre dependencies meta-package for SLES
200 Group: Utilities/System
201 Provides: lustre-deps = %{version}
202 Requires: %{name} = %{version}, sles-release
203 Conflicts: %{name}-deps-rhel
205 %description deps-sles
206 This package has RPM dependencies appropriate for SLES systems.
209 Summary: Lustre dependencies meta-package for RHEL
210 Group: Utilities/System
211 Provides: lustre-deps = %{version}
212 Requires: %{name} = %{version}, redhat-release
213 Conflicts: %{name}-deps-sles
215 %description deps-rhel
216 This package has RPM dependencies appropriate for RHEL, RHL, and FC
220 Summary: Lustre testing framework
221 Group: Development/Kernel
222 Provides: %{name}-tests = %{version}
223 Requires: %{name} = %{version}, %{name}-modules = %{version}, lustre-iokit
226 This package contains a set of test binaries and scripts that are intended
227 to be used by the Lustre testing framework.
229 %if %{with lustre_iokit}
230 %package -n lustre-iokit
231 Summary: The Lustre IO-Kit is a collection of benchmark tools for a cluster with the Lustre file system.
232 Group: Applications/System
233 Requires: python > 2.2, sg3_utils
235 %description -n lustre-iokit
236 This package includes five tools:
238 A test of the 'bare metal' performance, bypassing as much of the kernel as we can. Uses the sgp_dd utility.
241 This survey can be run in 3 modes to test disk I/O including the filesystem,
242 network I/O, and disk I/O via the network. The script does sequential I/O
243 with varying numbers of threads and objects (files) by using lctl::test_brw
244 to drive the echo_client connected to local or remote obdfilter instances,
245 or remote obdecho instances.
248 This survey tests the client-to-disk performance of individual OSTs, and
249 ranks then for comparison.
252 This script will collect IO stats on a defined set of nodes.
255 A script to run the IOR benchmark. The latest version can be downloaded from
256 http://www.llnl.gov/asci/purple/benchmarks/limited/ior/
259 This survey tests the local metadata performance using the echo_client to drive
260 the MDD layer to perform operations. It is run with multiple threads (to
261 simulate MDT service threads) locally on the MDS node, and does not need Lustre
262 clients in order to run
265 %if 0%{?suse_version}
269 %setup -qn lustre-%{version}
270 ln lustre/ChangeLog ChangeLog-lustre
271 ln lnet/ChangeLog ChangeLog-lnet
274 # if RPM_BUILD_NCPUS unset, set it
275 if [ -z "$RPM_BUILD_NCPUS" ] ; then
276 RPM_BUILD_NCPUS=$(egrep -c "^cpu[0-9]+" /proc/stat 2>/dev/null || echo 0 :)
277 if [ $RPM_BUILD_NCPUS -eq 0 ] ; then
280 if [ $RPM_BUILD_NCPUS -gt 8 ] ; then
285 rm -rf $RPM_BUILD_ROOT
287 # Set an explicit path to our Linux tree, if we can.
288 cd $RPM_BUILD_DIR/lustre-%{version}
289 # override %optflags so that the vendor's overzealous flags don't create
291 %define optflags -g -O2 -Werror
292 CONFIGURE_ARGS="%{?configure_args} --with-release=%release"
293 %if %{with lustre_tests}
294 CONFIGURE_ARGS="$CONFIGURE_ARGS --enable-tests --enable-liblustre-tests"
296 CONFIGURE_ARGS="$CONFIGURE_ARGS --disable-tests --disable-liblustre-tests"
298 %if %{without lustre_iokit}
299 CONFIGURE_ARGS="$CONFIGURE_ARGS --disable-iokit"
302 # if %%kdir was given, make sure it's not in the configure arguments
303 if [ -n "%kdir" ]; then
304 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-linux=[^ ][^ ]* \?//')
306 # ditto for %%kobjdir
307 if [ -n "%kobjdir" ]; then
308 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-linux-obj=[^ ][^ ]* \?//')
310 # remove --with-kmp-moddir from configure arguments,
311 # it will be set --with-kmp-moddir=%%kmoddir
312 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-kmp-moddir=[^ ][^ ]* \?//')
314 # we need to eval "configure" because $CONFIGURE_ARGS could have a quoted
315 # string in it which we don't want word splitted by the shell
316 # also remove (build|host|target) options because they will be specified
317 # inside $CONFIGURE_ARGS
318 %define eval_configure %(echo '%configure' | sed -e 's#\./configure#eval ./configure#' -e 's/--\\(build\\|host\\|target\\)=[^ ][^ ]* //g')
321 %{?kdir: --with-linux=%kdir} %{?kobjdir: --with-linux-obj=%kobjdir} \
322 $CONFIGURE_ARGS --with-kmp-moddir=%{kmoddir}
323 make -j $RPM_BUILD_NCPUS -s %{?make_args}
326 make install DESTDIR=$RPM_BUILD_ROOT
327 # hack to avoid changing the libsysio code for "make install"
328 rm -f $RPM_BUILD_ROOT%{_libdir}/libsysio.a
330 # hack to include the llog_test module in lustre-tests
331 llog_base=$RPM_BUILD_DIR/lustre-%{version}/lustre/obdclass/llog_test
332 if [ -e ${llog_base}.ko ]; then
333 cp ${llog_base}.ko $RPM_BUILD_ROOT%{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/lustre
334 elif [ -e ${llog_base}.o ]; then
335 cp ${llog_base}.o $RPM_BUILD_ROOT%{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/lustre
338 # Create the pristine source directory.
339 cd $RPM_BUILD_DIR/lustre-%{version}
340 mkdir -p $RPM_BUILD_ROOT%{_prefix}/src
342 ln -s $RPM_BUILD_ROOT%{_prefix}/src lustre-source
343 make distdir distdir=lustre-source/lustre-%{version}
344 chmod -R go-w lustre-source/lustre-%{version}
345 # fc18 needs 'x' permission for library files
346 find $RPM_BUILD_ROOT -name '*.so' | xargs chmod +x
348 cat >lustre.files <<EOF
349 %attr(-, root, root) %{?rootdir}/sbin/mount.lustre
350 %attr(-, root, root) %{_sbindir}/*
351 %attr(-, root, root) %{_bindir}/lfs
352 %attr(-, root, root) %{_bindir}/lfs_migrate
353 %attr(-, root, root) %{_bindir}/llbackup
354 %attr(-, root, root) %{_bindir}/llobdstat
355 %attr(-, root, root) %{_bindir}/llstat
356 %attr(-, root, root) %{_bindir}/lustre_req_history
357 %attr(-, root, root) %{_bindir}/plot-llstat
358 %attr(-, root, root) %{_bindir}/req_layout
359 %attr(-, root, root) %{_libdir}/libptlctl.a
360 %attr(-, root, root) %{_libdir}/liblustreapi.a
361 %attr(-, root, root) %{_libdir}/liblustreapi.so
362 %attr(-, root, root) %{_mandir}/man?/*
363 %attr(-, root, root) %{_datadir}/lustre
364 %attr(-, root, root) %{_includedir}/lustre
365 %attr(-, root, root) %{_includedir}/libcfs
366 %attr(-, root, root) %{_libexecdir}/lustre/lc_common
367 %attr(-, root, root) %{_libexecdir}/lustre/haconfig
368 %attr(-, root, root) %{_sysconfdir}/udev/rules.d/99-lustre.rules
369 %attr(-, root, root) %config(noreplace) %{_sysconfdir}/ldev.conf
373 # The .ha_v2 extension identifies the heartbeat resource agent as using
374 # legacy syntax. Install a compatibility symlink to avoid conflicts when
375 # newer-style agents are added.
376 ln -s Lustre.ha_v2 $RPM_BUILD_ROOT%{_sysconfdir}/ha.d/resource.d/Lustre
377 echo '%attr(-, root, root) %{_sysconfdir}/ha.d/resource.d/Lustre.ha_v2' >>lustre.files
378 echo '%attr(-, root, root) %{_sysconfdir}/ha.d/resource.d/Lustre' >>lustre.files
380 if [ -f $RPM_BUILD_ROOT%{_sysconfdir}/init.d/lustre ]; then
381 echo '%attr(-, root, root) %{_sysconfdir}/sysconfig/lustre' >>lustre.files
382 echo '%attr(-, root, root) %{_sysconfdir}/init.d/lustre' >>lustre.files
386 if [ -f $RPM_BUILD_ROOT%{_sysconfdir}/init.d/lnet ]; then
387 echo '%attr(-, root, root) %{_sysconfdir}/init.d/lnet' >>lustre.files
390 if [ -f $RPM_BUILD_ROOT%{_libdir}/libcfsutil.a ] ; then
391 echo '%attr(-, root, root) %{_libdir}/libcfsutil.a' >>lustre.files
394 if [ -f $RPM_BUILD_ROOT%{_libdir}/liblustre.so ] ; then
395 echo '%attr(-, root, root) %{_libdir}/liblustre.a' >>lustre.files
396 echo '%attr(-, root, root) %{_libdir}/liblustre.so' >>lustre.files
399 if [ -f $RPM_BUILD_ROOT%{_libdir}/libiam.a ] ; then
400 echo '%attr(-, root, root) %{_libdir}/libiam.a' >>lustre.files
403 if [ -d $RPM_BUILD_ROOT%{_libdir}/lustre/snmp ] ; then
404 echo '%attr(-, root, root) %{_libdir}/lustre/snmp' >>lustre.files
405 echo '%attr(-, root, root) %{_datadir}/lustre/snmp/mibs' >>lustre.files
408 # Have universal lustre headers
409 if [ -f $RPM_BUILD_DIR/lustre-%{version}/lustre/include/lustre/lustre_idl.h ] ; then
410 echo '%attr(-, root, root) %{_includedir}/linux/lustre_user.h' >>lustre.files
412 echo '%attr(-, root, root) %{_includedir}/linux/lustre_idl.h' >>lustre.files
415 if [ -f $RPM_BUILD_DIR/lustre-%{version}/lustre/include/linux/lustre_types.h ] ; then
416 echo '%attr(-, root, root) %{_includedir}/linux/lustre_types.h' >>lustre.files
419 find $RPM_BUILD_ROOT%{_libdir}/@PACKAGE@/ -name \*.la -delete
421 %if %{with lustre_tests}
422 echo '%attr(-, root, root) %{_libdir}/lustre/tests/*' >lustre-tests.files
423 echo '%attr(-, root, root) %{_bindir}/mcreate' >>lustre-tests.files
424 echo '%attr(-, root, root) %{_bindir}/munlink' >>lustre-tests.files
425 echo '%attr(-, root, root) %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/llog_test.ko' >>lustre-tests.files
426 if [ -d $RPM_BUILD_ROOT%{_libdir}/lustre/liblustre/tests ] ; then
427 echo '%attr(-, root, root) %{_libdir}/lustre/liblustre/tests/*' >>lustre-tests.files
431 %if %{defined cross_path}
432 %if %{defined rpm_post_base}
433 POST_SCRIPT=$RPM_BUILD_DIR/lustre-%{version}/%{post_script}
434 if [ -f $POST_SCRIPT ]; then
435 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}.sh
436 echo '%attr(0555, root, root) %{rpm_post_base}.sh' >>lustre.files
437 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-modules.sh
439 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-osd-ldiskfs.sh
442 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-osd-zfs.sh
444 %if %{with lustre_tests}
445 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-tests.sh
446 echo '%attr(0555, root, root) %{rpm_post_base}-tests.sh' >>lustre-tests.files
451 # mark modules executable for find-debuginfo.sh
452 find $RPM_BUILD_ROOT%{?rootdir}/lib/modules/%{kversion}/%{kmoddir} -name "*.ko" -type f | \
453 xargs --no-run-if-empty chmod u+x
456 %files -f lustre.files
459 %attr(-, root, root) %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/*
460 %if %{with lustre_tests}
461 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/llog_test.ko
464 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/ldiskfs.ko
465 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/fsfilt_ldiskfs.ko
466 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/osd_ldiskfs.ko
469 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/osd_zfs.ko
471 %if %{defined rpm_post_base}
472 %attr(0555, root, root) %{rpm_post_base}-modules.sh
474 %attr(-, root, root) %doc COPYING
475 %attr(-, root, root) %doc ChangeLog-lustre
476 %attr(-, root, root) %doc ChangeLog-lnet
480 %attr(-, root, root) %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/ldiskfs.ko
481 %attr(-, root, root) %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/fsfilt_ldiskfs.ko
482 %attr(-, root, root) %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/osd_ldiskfs.ko
483 %attr(-, root, root) %{_libdir}/@PACKAGE@/mount_osd_ldiskfs.so
484 %if %{defined rpm_post_base}
485 %attr(0555, root, root) %{rpm_post_base}-osd-ldiskfs.sh
491 %defattr(-,root,root)
492 %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/osd_zfs.ko
493 %{_libdir}/@PACKAGE@/mount_osd_zfs.so
494 %if %{defined rpm_post_base}
495 %attr(0555, root, root) %{rpm_post_base}-osd-zfs.sh
500 %attr(-, root, root) %{_prefix}/src/lustre-%{version}
502 # uncomment these lines to enable deps packages
506 %if %{with lustre_tests}
507 %files tests -f lustre-tests.files
510 %if %{with lustre_iokit}
511 %files -n lustre-iokit
512 %attr(-, root, root) %{_bindir}/ior-survey
513 %attr(-, root, root) %{_bindir}/parse-ior
514 %attr(-, root, root) %{_bindir}/libecho
515 %attr(-, root, root) %{_bindir}/obdfilter-survey
516 %attr(-, root, root) %{_bindir}/plot-obdfilter
517 %attr(-, root, root) %{_bindir}/plot-ost
518 %attr(-, root, root) %{_bindir}/ost-survey
519 %attr(-, root, root) %{_bindir}/sgpdd-survey
520 %attr(-, root, root) %{_bindir}/plot-sgpdd
521 %attr(-, root, root) %{_bindir}/lstats.sh
522 %attr(-, root, root) %{_bindir}/gather_stats_everywhere.sh
523 %attr(-, root, root) %{_bindir}/config.sh
524 %attr(-, root, root) %{_bindir}/mds-survey
525 %doc lustre-iokit/obdfilter-survey/README.obdfilter-survey
526 %doc lustre-iokit/ior-survey/README.ior-survey
527 %doc lustre-iokit/ost-survey/README.ost-survey
528 %doc lustre-iokit/mds-survey/README.mds-survey
529 %doc lustre-iokit/sgpdd-survey/README.sgpdd-survey
530 %doc lustre-iokit/stats-collect/README.lstats.sh
533 %if %{defined rpm_post_base}
535 if [ -x %{rpm_post_base}.sh ]; then
536 %{rpm_post_base}.sh %{cross_path} create
540 if [ -x %{rpm_post_base}.sh ]; then
541 %{rpm_post_base}.sh %{cross_path} remove
546 %if %{defined rpm_post_base}
547 if [ -x %{rpm_post_base}-modules.sh ]; then
548 %{rpm_post_base}-modules.sh %{cross_path} create
551 if [ -f /boot/System.map-%{kversion} ]; then
552 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
554 depmod -ae %{kversion} || exit 0
557 MODULES_RPM_NAME=$(rpm -q %{name}-modules | grep "%{version}-%{release}")
558 # "weak modules" support
560 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
561 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' |
562 /usr/lib/module-init-tools/weak-modules --add-modules
565 if [ -x /sbin/weak-modules ]; then
566 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' |
567 /sbin/weak-modules --add-modules
570 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
571 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
572 # print a warning so that users are aware of this issue.
573 if sysctl kernel.unsupported >/dev/null 2>&1 &&
574 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
575 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
577 warning: the Lustre modules are not supported by Novell. To use Lustre
578 on this system, you should put
580 allow_unsupported_modules 1
582 into /etc/modprobe.d/unsupported_modules"
588 %if %{defined rpm_post_base}
589 if [ -x %{rpm_post_base}-osd-ldiskfs.sh ]; then
590 %{rpm_post_base}-osd-ldiskfs.sh %{cross_path} create
593 if [ -f /boot/System.map-%{kversion} ]; then
594 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
596 depmod -ae %{kversion} || exit 0
599 OSD_LDISKFS_RPM_NAME=$(rpm -q %{name}-osd-ldiskfs | grep "%{version}-%{release}")
600 # "weak modules" support
602 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
603 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' |
604 /usr/lib/module-init-tools/weak-modules --add-modules
607 if [ -x /sbin/weak-modules ]; then
608 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' |
609 /sbin/weak-modules --add-modules
612 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
613 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
614 # print a warning so that users are aware of this issue.
615 if sysctl kernel.unsupported >/dev/null 2>&1 &&
616 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
617 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
619 warning: the Lustre modules are not supported by Novell. To use Lustre
620 on this system, you should put
622 allow_unsupported_modules 1
624 into /etc/modprobe.d/unsupported_modules"
631 %if %{defined rpm_post_base}
632 if [ -x %{rpm_post_base}-osd-zfs.sh ]; then
633 %{rpm_post_base}-osd-zfs.sh %{cross_path} create
636 if [ -f /boot/System.map-%{kversion} ]; then
637 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
639 depmod -ae %{kversion} || exit 0
642 OSD_ZFS_RPM_NAME=$(rpm -q %{name}-osd-zfs | grep "%{version}-%{release}")
643 # "weak modules" support
645 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
646 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' |
647 /usr/lib/module-init-tools/weak-modules --add-modules
650 if [ -x /sbin/weak-modules ]; then
651 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' |
652 /sbin/weak-modules --add-modules
655 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
656 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
657 # print a warning so that users are aware of this issue.
658 if sysctl kernel.unsupported >/dev/null 2>&1 &&
659 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
660 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
662 warning: the Lustre modules are not supported by Novell. To use Lustre
663 on this system, you should put
665 allow_unsupported_modules 1
667 into /etc/modprobe.d/unsupported_modules"
673 %if %{defined rpm_post_base}
674 if [ -x %{rpm_post_base}-modules.sh ]; then
675 %{rpm_post_base}-modules.sh %{cross_path} remove
678 MODULES_RPM_NAME=$(rpm -q %{name}-modules | grep "%{version}-%{release}")
679 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' > /var/run/%{name}-modules || true
684 %if %{defined rpm_post_base}
685 if [ -x %{rpm_post_base}-osd-ldiskfs.sh ]; then
686 %{rpm_post_base}-osd-ldiskfs.sh %{cross_path} remove
689 OSD_LDISKFS_RPM_NAME=$(rpm -q %{name}-osd-ldiskfs | grep "%{version}-%{release}")
690 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' > /var/run/%{name}-osd-ldiskfs || true
696 %if %{defined rpm_post_base}
697 if [ -x %{rpm_post_base}-osd-zfs.sh ]; then
698 %{rpm_post_base}-osd-zfs.sh %{cross_path} remove
701 OSD_ZFS_RPM_NAME=$(rpm -q %{name}-osd-zfs | grep "%{version}-%{release}")
702 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' > /var/run/%{name}-osd-zfs || true
706 %if %{undefined cross_path}
708 if [ -f /boot/System.map-%{kversion} ]; then
709 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
711 depmod -ae %{kversion} || exit 0
714 # "weak modules" support
716 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
717 cat /var/run/%{name}-modules |
718 /usr/lib/module-init-tools/weak-modules --remove-modules
721 if [ -x /sbin/weak-modules ]; then
722 cat /var/run/%{name}-modules |
723 /sbin/weak-modules --remove-modules
725 rm /var/run/%{name}-modules
729 if [ -f /boot/System.map-%{kversion} ]; then
730 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
732 depmod -ae %{kversion} || exit 0
735 # "weak modules" support
737 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
738 cat /var/run/%{name}-osd-ldiskfs |
739 /usr/lib/module-init-tools/weak-modules --remove-modules
742 if [ -x /sbin/weak-modules ]; then
743 cat /var/run/%{name}-osd-ldiskfs |
744 /sbin/weak-modules --remove-modules
746 rm /var/run/%{name}-osd-ldiskfs
751 if [ -f /boot/System.map-%{kversion} ]; then
752 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
754 depmod -ae %{kversion} || exit 0
757 # "weak modules" support
759 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
760 cat /var/run/%{name}-osd-zfs |
761 /usr/lib/module-init-tools/weak-modules --remove-modules
764 if [ -x /sbin/weak-modules ]; then
765 cat /var/run/%{name}-osd-zfs |
766 /sbin/weak-modules --remove-modules
768 rm /var/run/%{name}-osd-zfs
772 %if %{with lustre_tests}
774 %if %{defined rpm_post_base}
775 if [ -x %{rpm_post_base}-tests.sh ]; then
776 %{rpm_post_base}-tests.sh %{cross_path} create
780 if [ -x %{rpm_post_base}-tests.sh ]; then
781 %{rpm_post_base}-tests.sh %{cross_path} remove
784 if [ -f /boot/System.map-%{kversion} ]; then
785 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
787 depmod -ae %{kversion} || exit 0
791 if [ -f /boot/System.map-%{kversion} ]; then
792 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
794 depmod -ae %{kversion} || exit 0
800 rm -rf $RPM_BUILD_ROOT