3 # Declare rpmbuild --with/--without parameters
7 %bcond_without lustre_tests
8 %bcond_without lustre_iokit
10 %if %{without servers}
11 # --without servers overrides --with {ldiskfs|zfs}
12 # so undefine the internal variables set by bcond_*
13 %undefine with_ldiskfs
17 %{!?version: %global version @VERSION@}
18 %{!?kver: %global kver ""}
19 %{!?kdir: %global kdir %(dir=$(echo "%configure_args" | sed -ne 's/.*--with-linux=\\([^ ][^ ]*\\).*$/\\1/p'); if [ -n "$dir" ]; then echo "$dir"; else if [ -n "%kver" ]; then kversion="%kver"; else kversion="$(uname -r)"; fi; echo "/lib/modules/$kversion/source"; fi)}
21 %{!?kobjdir: %global kobjdir %(dir=$(echo "%configure_args" | sed -ne 's/.*--with-linux-obj=\\([^ ][^ ]*\\).*$/\\1/p'); if [ -n "$dir" ]; then echo "$dir"; else if [ -n "%kver" ]; then kversion="%kver"; else kversion="$(uname -r)"; fi; if [ "%kdir" = "/lib/modules/$kversion/source" ]; then echo "/lib/modules/$kversion/build"; else echo "%kdir"; fi; fi)}
23 # as an alternative to this implementation we could simply "make -C $kdir kernelversion"
24 %{!?kversion: %global kversion %(if test -s %kobjdir/include/generated/utsrelease.h ; then LINUXRELEASEHEADER=%kobjdir/include/generated/utsrelease.h ; elif test -s %kobjdir/include/linux/utsrelease.h ; then LINUXRELEASEHEADER=%kobjdir/include/linux/utsrelease.h ; else LINUXRELEASEHEADER=%kobjdir/include/linux/version.h; fi; sed -ne '/^#define UTS_RELEASE/s/.*"\\(.*\\)"$/\\1/p' $LINUXRELEASEHEADER)}
26 %{!?downstream_release: %global downstream_release "@DOWNSTREAM_RELEASE@"}
28 %define buildid %(if [ -n "@BUILDID@" ]; then echo "_@BUILDID@"; fi)
30 %{!?myrelease: %global myrelease %(if [ -n "%downstream_release" ]; then echo -n "%{downstream_release}_"; fi; echo %kversion | tr '-' '_')}
32 # always append the buildid, even when the caller defines %release
33 %define fullrelease %{myrelease}%{buildid}
35 # in order to get kernel symset and/or kernel module dependencies into
36 # the RPM, in order to support weak-modules, the internal dependency gen-
37 # erator needs to be disabled
38 # this is done with (reduce the double % down to a single %):
40 # %%global _use_internal_dependency_generator 0
42 # on SLES10, /usr/lib/rpm/macros already sets this, so no harm in also
43 # defining it here (until Suse changes their mind)
45 # on RHEL5, however, we do need to explicitly disable the internal dep-
46 # endency generator and allow the external one be used
47 # but since RedHat's kABI is only a subset of the total kernel ABI, it
48 # doesn't include all of the symbols we (or OFED for that matter) need
49 # until RedHat includes all of the symbols we need in their symsets we
50 # cannot support weak-modules
51 # we did e-mail the maintainer of all of this stuff @redhat but got no
53 #%%global _use_internal_dependency_generator 0
55 # for those uses that don't want the -smp/-bigsmp (or the .arch) on the end
57 %define krequires %(bash -c "echo %{kversion} | sed -e 's/\.x86_64$//' -e 's/\.i[3456]86$//' -e 's/-smp$//' -e 's/-bigsmp$//' -e 's/-ppc64$//' -e 's/-default$//'")
59 # Set the package name prefix
60 %if %{undefined lustre_name}
62 %global lustre_name lustre
64 %global lustre_name lustre-client
68 %if %{undefined kmoddir}
69 %if %{defined kernel_module_package_moddir}
70 %global kmoddir %{kernel_module_package_moddir}
72 %if %{defined suse_kernel_module_package}
73 %global kmoddir updates
80 %if %{defined cross_path} && %{defined post_script}
81 %define rpm_post_base %(echo $(dirname %{cross_path})/%{lustre_name})
84 Summary: Lustre File System
87 Release: %{fullrelease}
89 Group: Utilities/System
90 Source: lustre-%{version}.tar.gz
91 URL: http://wiki.whamcloud.com/
92 BuildRoot: %{_tmppath}/lustre-%{version}-root
93 Obsoletes: lustre-lite, lustre-lite-utils, lustre-ldap nfs-utils-lustre
94 Provides: lustre-lite = %{version}, lustre-lite-utils = %{version}
95 Requires: %{name}-modules = %{version}
99 %if %{defined cross_requires}
100 Requires: %{cross_requires}
103 # GSS requires this: BuildRequires: pkgconfig, libgssapi-devel >= 0.10
104 %if %{_vendor}=="redhat" || %{_vendor}=="fedora"
105 #suse don't support selinux
106 BuildRequires: libselinux-devel
112 Userspace tools and files for the Lustre file system.
115 Summary: Kernel Lustre modules for Linux %{kversion}
116 %if %{defined cross_requires}
117 Requires: %{cross_requires}
120 # for SLES11, we need nothing here
121 %if %{_vendor}=="redhat" || %{_vendor}=="fedora"
122 # for RHEL we need to require the specific kernel still since weak-modules
123 # support on RH is, well, weak, to be punny about it
124 Requires: kernel = %{krequires}
127 Group: Development/Kernel
130 Lustre file system, server and network drivers for Linux %{kversion}.
134 Summary: osd-ldiskfs contains both ldiskfs and its osd interface in Lustre.
135 Requires: lustre-modules = %{version}
136 Requires: modutils >= 2.4.10
137 Requires: ldiskfsprogs >= 1.42.7.wc1
139 Obsoletes: lustre-ldiskfs
140 Group: Development/Kernel
142 %description osd-ldiskfs
143 The Lustre Object Storage Device (OSD) API is the interface to access and
144 modify data that is supposed to be stored persistently. This API is the interface
145 to code that bridges individual file systems. This specific package provides an
146 implementation of the OSD API for using the Ldiskfs filesystem as the underlying
147 backing store of a Lustre server.
152 Summary: osd-zfs is the mandatory glue for ZFS support in Lustre.
153 Requires: lustre-modules = %{version}, zfs-kmod
155 Group: Development/Kernel
158 The Lustre Object Storage Device (OSD) API is the interface to access and
159 modify data that is supposed to be stored persistently. This API is the interface
160 to code that bridges individual file systems. This specific package provides an
161 implementation of the OSD API for using the ZFS filesystem as the underlying
162 backing store of a Lustre server.
166 Summary: Object-Based Disk storage driver source
167 Group: Development/Kernel
170 Lustre sources for further development
172 # Since the RPMs we ship are to be used on both SLES and RHEL, we
173 # can't include any dependency information (since the package names
174 # are different on the two platforms).
176 # Instead, we can build these empty meta-packages that only include
177 # dependency information. These let people get the correct
178 # dependencies for their platform and lets them use tools like yum and
179 # red carpet to install the correct files.
181 # Unfortunately I have not seen this come up on the lists much, so I
182 # have disabled them (by commenting out their empty files section
183 # below) until it's clear that they resolve more confusion than they
187 Summary: Lustre dependencies meta-package for SLES
188 Group: Utilities/System
189 Provides: lustre-deps = %{version}
190 Requires: %{name} = %{version}, sles-release
191 Conflicts: %{name}-deps-rhel
193 %description deps-sles
194 This package has RPM dependencies appropriate for SLES systems.
197 Summary: Lustre dependencies meta-package for RHEL
198 Group: Utilities/System
199 Provides: lustre-deps = %{version}
200 Requires: %{name} = %{version}, redhat-release
201 Conflicts: %{name}-deps-sles
203 %description deps-rhel
204 This package has RPM dependencies appropriate for RHEL, RHL, and FC
208 Summary: Lustre testing framework
209 Group: Development/Kernel
210 Provides: %{name}-tests = %{version}
211 Requires: %{name} = %{version}, %{name}-modules = %{version}, lustre-iokit
214 This package contains a set of test binaries and scripts that are intended
215 to be used by the Lustre testing framework.
217 %if %{with lustre_iokit}
218 %package -n lustre-iokit
219 Summary: The Lustre IO-Kit is a collection of benchmark tools for a cluster with the Lustre file system.
220 Group: Applications/System
221 Requires: python > 2.2, sg3_utils
223 %description -n lustre-iokit
224 This package includes five tools:
226 A test of the 'bare metal' performance, bypassing as much of the kernel as we can. Uses the sgp_dd utility.
229 This survey can be run in 3 modes to test disk I/O including the filesystem,
230 network I/O, and disk I/O via the network. The script does sequential I/O
231 with varying numbers of threads and objects (files) by using lctl::test_brw
232 to drive the echo_client connected to local or remote obdfilter instances,
233 or remote obdecho instances.
236 This survey tests the client-to-disk performance of individual OSTs, and
237 ranks then for comparison.
240 This script will collect IO stats on a defined set of nodes.
243 A script to run the IOR benchmark. The latest version can be downloaded from
244 http://www.llnl.gov/asci/purple/benchmarks/limited/ior/
247 This survey tests the local metadata performance using the echo_client to drive
248 the MDD layer to perform operations. It is run with multiple threads (to
249 simulate MDT service threads) locally on the MDS node, and does not need Lustre
250 clients in order to run
253 %if 0%{?suse_version}
257 %setup -qn lustre-%{version}
258 ln lustre/ChangeLog ChangeLog-lustre
259 ln lnet/ChangeLog ChangeLog-lnet
262 # if RPM_BUILD_NCPUS unset, set it
263 if [ -z "$RPM_BUILD_NCPUS" ] ; then
264 RPM_BUILD_NCPUS=$(egrep -c "^cpu[0-9]+" /proc/stat 2>/dev/null || echo 0 :)
265 if [ $RPM_BUILD_NCPUS -eq 0 ] ; then
268 if [ $RPM_BUILD_NCPUS -gt 8 ] ; then
273 # Set an explicit path to our Linux tree, if we can.
274 cd $RPM_BUILD_DIR/lustre-%{version}
275 # override %optflags so that the vendor's overzealous flags don't create
277 %define optflags -g -O2 -Werror
278 CONFIGURE_ARGS="%{?configure_args} --with-release=%release"
279 %if %{with lustre_tests}
280 CONFIGURE_ARGS="$CONFIGURE_ARGS --enable-tests --enable-liblustre-tests"
282 CONFIGURE_ARGS="$CONFIGURE_ARGS --disable-tests --disable-liblustre-tests"
284 %if %{without lustre_iokit}
285 CONFIGURE_ARGS="$CONFIGURE_ARGS --disable-iokit"
288 # if %%kdir was given, make sure it's not in the configure arguments
289 if [ -n "%kdir" ]; then
290 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-linux=[^ ][^ ]* \?//')
292 # ditto for %%kobjdir
293 if [ -n "%kobjdir" ]; then
294 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-linux-obj=[^ ][^ ]* \?//')
296 # remove --with-kmp-moddir from configure arguments,
297 # it will be set --with-kmp-moddir=%%kmoddir
298 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-kmp-moddir=[^ ][^ ]* \?//')
300 # we need to eval "configure" because $CONFIGURE_ARGS could have a quoted
301 # string in it which we don't want word splitted by the shell
302 # also remove (build|host|target) options because they will be specified
303 # inside $CONFIGURE_ARGS
304 %define eval_configure %(echo '%configure' | sed -e 's#\./configure#eval ./configure#' -e 's/--\\(build\\|host\\|target\\)=[^ ][^ ]* //g')
307 %{?kdir: --with-linux=%kdir} %{?kobjdir: --with-linux-obj=%kobjdir} \
308 $CONFIGURE_ARGS --with-kmp-moddir=%{kmoddir}
309 make -j $RPM_BUILD_NCPUS -s %{?make_args}
312 make install DESTDIR=$RPM_BUILD_ROOT
313 # hack to avoid changing the libsysio code for "make install"
314 rm -f $RPM_BUILD_ROOT%{_libdir}/libsysio.a
316 # The .ha_v2 extension identifies the heartbeat resource agent as using
317 # legacy syntax. Install a compatibility symlink to avoid conflicts when
318 # newer-style agents are added.
319 ln -s Lustre.ha_v2 $RPM_BUILD_ROOT%{_sysconfdir}/ha.d/resource.d/Lustre
321 # Create the pristine source directory.
322 cd $RPM_BUILD_DIR/lustre-%{version}
323 mkdir -p $RPM_BUILD_ROOT%{_prefix}/src
325 ln -s $RPM_BUILD_ROOT%{_prefix}/src lustre-source
326 make distdir distdir=lustre-source/lustre-%{version}
327 chmod -R go-w lustre-source/lustre-%{version}
328 # fc18 needs 'x' permission for library files
329 find $RPM_BUILD_ROOT -name '*.so' | xargs chmod +x
331 cat >lustre.files <<EOF
332 %{?rootdir}/sbin/mount.lustre
335 %{_bindir}/lfs_migrate
339 %{_bindir}/lustre_req_history
340 %{_bindir}/plot-llstat
341 %{_bindir}/req_layout
342 %{_libdir}/libptlctl.a
343 %{_libdir}/liblustreapi.a
344 %{_libdir}/liblustreapi.so
347 %{_includedir}/lustre
348 %{_includedir}/libcfs
349 %{_libexecdir}/lustre/lc_common
350 %{_sysconfdir}/udev/rules.d/99-lustre.rules
351 %{_sysconfdir}/init.d/lnet
352 %{_sysconfdir}/init.d/lustre
353 %config(noreplace) %{_sysconfdir}/ldev.conf
354 %{_sysconfdir}/sysconfig/lustre
355 %{_libexecdir}/lustre/haconfig
356 %{_sysconfdir}/ha.d/resource.d/Lustre.ha_v2
357 %{_sysconfdir}/ha.d/resource.d/Lustre
360 if [ -f $RPM_BUILD_ROOT%{_libdir}/libcfsutil.a ] ; then
361 echo '%{_libdir}/libcfsutil.a' >>lustre.files
364 if [ -f $RPM_BUILD_ROOT%{_libdir}/liblustre.so ] ; then
365 echo '%{_libdir}/liblustre.a' >>lustre.files
366 echo '%{_libdir}/liblustre.so' >>lustre.files
369 if [ -f $RPM_BUILD_ROOT%{_libdir}/libiam.a ] ; then
370 echo '%{_libdir}/libiam.a' >>lustre.files
373 if [ -d $RPM_BUILD_ROOT%{_libdir}/lustre/snmp ] ; then
374 echo '%{_libdir}/lustre/snmp' >>lustre.files
375 echo '%{_datadir}/lustre/snmp/mibs' >>lustre.files
378 # Have universal lustre headers
379 if [ -f $RPM_BUILD_DIR/lustre-%{version}/lustre/include/lustre/lustre_idl.h ] ; then
380 echo '%{_includedir}/linux/lustre_user.h' >>lustre.files
382 echo '%{_includedir}/linux/lustre_idl.h' >>lustre.files
385 if [ -f $RPM_BUILD_DIR/lustre-%{version}/lustre/include/linux/lustre_types.h ] ; then
386 echo '%{_includedir}/linux/lustre_types.h' >>lustre.files
389 %if %{with lustre_tests}
390 echo '%{_libdir}/lustre/tests/*' >lustre-tests.files
391 echo '%{_bindir}/mcreate' >>lustre-tests.files
392 echo '%{_bindir}/munlink' >>lustre-tests.files
393 echo '%{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/llog_test.ko' >>lustre-tests.files
394 if [ -d $RPM_BUILD_ROOT%{_libdir}/lustre/liblustre/tests ] ; then
395 echo '%{_libdir}/lustre/liblustre/tests/*' >>lustre-tests.files
399 %if %{defined cross_path}
400 %if %{defined rpm_post_base}
401 POST_SCRIPT=$RPM_BUILD_DIR/lustre-%{version}/%{post_script}
402 if [ -f $POST_SCRIPT ]; then
403 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}.sh
404 echo '%attr(0555, root, root) %{rpm_post_base}.sh' >>lustre.files
405 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-modules.sh
407 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-osd-ldiskfs.sh
410 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-osd-zfs.sh
412 %if %{with lustre_tests}
413 cp -f $POST_SCRIPT $RPM_BUILD_ROOT/%{rpm_post_base}-tests.sh
414 echo '%attr(0555, root, root) %{rpm_post_base}-tests.sh' >>lustre-tests.files
419 # mark modules executable for find-debuginfo.sh
420 find $RPM_BUILD_ROOT%{?rootdir}/lib/modules/%{kversion}/%{kmoddir} -name "*.ko" -type f | \
421 xargs --no-run-if-empty chmod u+x
424 %files -f lustre.files
425 %defattr(-,root,root)
428 %defattr(-,root,root)
429 %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/*
430 %if %{with lustre_tests}
431 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/llog_test.ko
434 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/ldiskfs.ko
435 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/osd_ldiskfs.ko
438 %exclude %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/osd_zfs.ko
440 %if %{defined rpm_post_base}
441 %attr(0555, root, root) %{rpm_post_base}-modules.sh
444 %doc ChangeLog-lustre
449 %defattr(-,root,root)
450 %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/ldiskfs.ko
451 %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/osd_ldiskfs.ko
452 %if %{defined rpm_post_base}
453 %attr(0555, root, root) %{rpm_post_base}-osd-ldiskfs.sh
459 %defattr(-,root,root)
460 %{?rootdir}/lib/modules/%{kversion}/%{kmoddir}/kernel/fs/@PACKAGE@/osd_zfs.ko
461 %if %{defined rpm_post_base}
462 %attr(0555, root, root) %{rpm_post_base}-osd-zfs.sh
467 %defattr(-,root,root)
468 %{_prefix}/src/lustre-%{version}
470 # uncomment these lines to enable deps packages
474 %if %{with lustre_tests}
475 %files tests -f lustre-tests.files
476 %defattr(-,root,root)
479 %if %{with lustre_iokit}
480 %files -n lustre-iokit
481 %defattr(-, root, root)
482 %{_bindir}/ior-survey
485 %{_bindir}/obdfilter-survey
486 %{_bindir}/plot-obdfilter
488 %{_bindir}/ost-survey
489 %{_bindir}/sgpdd-survey
490 %{_bindir}/plot-sgpdd
492 %{_bindir}/gather_stats_everywhere.sh
494 %{_bindir}/mds-survey
495 %doc lustre-iokit/obdfilter-survey/README.obdfilter-survey
496 %doc lustre-iokit/ior-survey/README.ior-survey
497 %doc lustre-iokit/ost-survey/README.ost-survey
498 %doc lustre-iokit/mds-survey/README.mds-survey
499 %doc lustre-iokit/sgpdd-survey/README.sgpdd-survey
500 %doc lustre-iokit/stats-collect/README.lstats.sh
503 %if %{defined rpm_post_base}
505 if [ -x %{rpm_post_base}.sh ]; then
506 %{rpm_post_base}.sh %{cross_path} create
510 if [ -x %{rpm_post_base}.sh ]; then
511 %{rpm_post_base}.sh %{cross_path} remove
516 %if %{defined rpm_post_base}
517 if [ -x %{rpm_post_base}-modules.sh ]; then
518 %{rpm_post_base}-modules.sh %{cross_path} create
521 if [ -f /boot/System.map-%{kversion} ]; then
522 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
524 depmod -ae %{kversion} || exit 0
527 MODULES_RPM_NAME=$(rpm -q %{name}-modules | grep "%{version}-%{release}")
528 # "weak modules" support
530 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
531 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' |
532 /usr/lib/module-init-tools/weak-modules --add-modules
535 if [ -x /sbin/weak-modules ]; then
536 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' |
537 /sbin/weak-modules --add-modules
540 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
541 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
542 # print a warning so that users are aware of this issue.
543 if sysctl kernel.unsupported >/dev/null 2>&1 &&
544 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
545 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
547 warning: the Lustre modules are not supported by Novell. To use Lustre
548 on this system, you should put
550 allow_unsupported_modules 1
552 into /etc/modprobe.d/unsupported_modules"
558 %if %{defined rpm_post_base}
559 if [ -x %{rpm_post_base}-osd-ldiskfs.sh ]; then
560 %{rpm_post_base}-osd-ldiskfs.sh %{cross_path} create
563 if [ -f /boot/System.map-%{kversion} ]; then
564 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
566 depmod -ae %{kversion} || exit 0
569 OSD_LDISKFS_RPM_NAME=$(rpm -q %{name}-osd-ldiskfs | grep "%{version}-%{release}")
570 # "weak modules" support
572 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
573 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' |
574 /usr/lib/module-init-tools/weak-modules --add-modules
577 if [ -x /sbin/weak-modules ]; then
578 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' |
579 /sbin/weak-modules --add-modules
582 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
583 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
584 # print a warning so that users are aware of this issue.
585 if sysctl kernel.unsupported >/dev/null 2>&1 &&
586 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
587 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
589 warning: the Lustre modules are not supported by Novell. To use Lustre
590 on this system, you should put
592 allow_unsupported_modules 1
594 into /etc/modprobe.d/unsupported_modules"
601 %if %{defined rpm_post_base}
602 if [ -x %{rpm_post_base}-osd-zfs.sh ]; then
603 %{rpm_post_base}-osd-zfs.sh %{cross_path} create
606 if [ -f /boot/System.map-%{kversion} ]; then
607 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
609 depmod -ae %{kversion} || exit 0
612 OSD_ZFS_RPM_NAME=$(rpm -q %{name}-osd-zfs | grep "%{version}-%{release}")
613 # "weak modules" support
615 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
616 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' |
617 /usr/lib/module-init-tools/weak-modules --add-modules
620 if [ -x /sbin/weak-modules ]; then
621 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' |
622 /sbin/weak-modules --add-modules
625 # If the kernel was built to reject unsupported modules (e.g. not a Lustre
626 # kernel), and this hasn't been overridden in /etc/modprobe.d yet, then
627 # print a warning so that users are aware of this issue.
628 if sysctl kernel.unsupported >/dev/null 2>&1 &&
629 [ "$(sysctl -n kernel.unsupported 2>/dev/null)" = "0" ] &&
630 ! modprobe -c | grep -q "^allow_unsupported_modules[ \t]1" ; then
632 warning: the Lustre modules are not supported by Novell. To use Lustre
633 on this system, you should put
635 allow_unsupported_modules 1
637 into /etc/modprobe.d/unsupported_modules"
643 %if %{defined rpm_post_base}
644 if [ -x %{rpm_post_base}-modules.sh ]; then
645 %{rpm_post_base}-modules.sh %{cross_path} remove
648 MODULES_RPM_NAME=$(rpm -q %{name}-modules | grep "%{version}-%{release}")
649 rpm -ql $MODULES_RPM_NAME | grep '\.ko$' > /var/run/%{name}-modules || true
654 %if %{defined rpm_post_base}
655 if [ -x %{rpm_post_base}-osd-ldiskfs.sh ]; then
656 %{rpm_post_base}-osd-ldiskfs.sh %{cross_path} remove
659 OSD_LDISKFS_RPM_NAME=$(rpm -q %{name}-osd-ldiskfs | grep "%{version}-%{release}")
660 rpm -ql $OSD_LDISKFS_RPM_NAME | grep '\.ko$' > /var/run/%{name}-osd-ldiskfs || true
666 %if %{defined rpm_post_base}
667 if [ -x %{rpm_post_base}-osd-zfs.sh ]; then
668 %{rpm_post_base}-osd-zfs.sh %{cross_path} remove
671 OSD_ZFS_RPM_NAME=$(rpm -q %{name}-osd-zfs | grep "%{version}-%{release}")
672 rpm -ql $OSD_ZFS_RPM_NAME | grep '\.ko$' > /var/run/%{name}-osd-zfs || true
676 %if %{undefined cross_path}
678 if [ -f /boot/System.map-%{kversion} ]; then
679 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
681 depmod -ae %{kversion} || exit 0
684 # "weak modules" support
686 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
687 cat /var/run/%{name}-modules |
688 /usr/lib/module-init-tools/weak-modules --remove-modules
691 if [ -x /sbin/weak-modules ]; then
692 cat /var/run/%{name}-modules |
693 /sbin/weak-modules --remove-modules
695 rm /var/run/%{name}-modules
699 if [ -f /boot/System.map-%{kversion} ]; then
700 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
702 depmod -ae %{kversion} || exit 0
705 # "weak modules" support
707 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
708 cat /var/run/%{name}-osd-ldiskfs |
709 /usr/lib/module-init-tools/weak-modules --remove-modules
712 if [ -x /sbin/weak-modules ]; then
713 cat /var/run/%{name}-osd-ldiskfs |
714 /sbin/weak-modules --remove-modules
716 rm /var/run/%{name}-osd-ldiskfs
721 if [ -f /boot/System.map-%{kversion} ]; then
722 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
724 depmod -ae %{kversion} || exit 0
727 # "weak modules" support
729 if [ -x /usr/lib/module-init-tools/weak-modules ]; then
730 cat /var/run/%{name}-osd-zfs |
731 /usr/lib/module-init-tools/weak-modules --remove-modules
734 if [ -x /sbin/weak-modules ]; then
735 cat /var/run/%{name}-osd-zfs |
736 /sbin/weak-modules --remove-modules
738 rm /var/run/%{name}-osd-zfs
742 %if %{with lustre_tests}
744 %if %{defined rpm_post_base}
745 if [ -x %{rpm_post_base}-tests.sh ]; then
746 %{rpm_post_base}-tests.sh %{cross_path} create
750 if [ -x %{rpm_post_base}-tests.sh ]; then
751 %{rpm_post_base}-tests.sh %{cross_path} remove
754 if [ -f /boot/System.map-%{kversion} ]; then
755 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
757 depmod -ae %{kversion} || exit 0
761 if [ -f /boot/System.map-%{kversion} ]; then
762 depmod -ae -F /boot/System.map-%{kversion} %{kversion} || exit 0
764 depmod -ae %{kversion} || exit 0
770 rm -rf $RPM_BUILD_ROOT