2 # vim:expandtab:shiftwidth=4:softtabstop=4:tabstop=4:
4 trap 'print_summary && echo "test-framework exiting on error"' ERR
9 export REFORMAT=${REFORMAT:-""}
10 export WRITECONF=${WRITECONF:-""}
12 export GMNALNID=${GMNALNID:-/usr/sbin/gmlndnid}
13 export CATASTROPHE=${CATASTROPHE:-/proc/sys/lnet/catastrophe}
16 export GSS_PIPEFS=false
17 export IDENTITY_UPCALL=default
19 #export PDSH="pdsh -S -Rssh -w"
21 # function used by scripts run on remote nodes
22 LUSTRE=${LUSTRE:-$(cd $(dirname $0)/..; echo $PWD)}
23 . $LUSTRE/tests/functions.sh
27 [[ $DIR/ = $MOUNT/* ]] || \
28 { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
29 [[ $DIR1/ = $MOUNT1/* ]] || \
30 { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
31 [[ $DIR2/ = $MOUNT2/* ]] || \
32 { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
34 [ -n "$failed" ] && exit 99 || true
38 echo "usage: $0 [-r] [-f cfgfile]"
45 [ "$TESTSUITE" == "lfscktest" ] && return 0
46 [ -n "$ONLY" ] && echo "WARNING: ONLY is set to ${ONLY}."
47 local form="%-13s %-17s %s\n"
48 printf "$form" "status" "script" "skipped tests E(xcluded) S(low)"
49 echo "------------------------------------------------------------------------------------"
50 for O in $TESTSUITE_LIST; do
53 local o=$(echo $O | tr "[:upper:]" "[:lower:]")
56 local log=${TMP}/${o}.log
57 [ -f $log ] && skipped=$(grep excluded $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
58 [ -f $log ] && slow=$(grep SLOW $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
59 [ "${!O}" = "done" ] && \
60 printf "$form" "Done" "$O" "E=$skipped" && \
61 [ -n "$slow" ] && printf "$form" "-" "-" "S=$slow"
65 for O in $TESTSUITE_LIST; do
66 [ "${!O}" = "no" ] && \
67 printf "$form" "Skipped" "$O" ""
70 for O in $TESTSUITE_LIST; do
71 [ "${!O}" = "done" -o "${!O}" = "no" ] || \
72 printf "$form" "UNFINISHED" "$O" ""
77 export LUSTRE=`absolute_path $LUSTRE`
78 export TESTSUITE=`basename $0 .sh`
79 export TEST_FAILED=false
81 export MKE2FS=${MKE2FS:-mke2fs}
82 export DEBUGFS=${DEBUGFS:-debugfs}
83 export TUNE2FS=${TUNE2FS:-tune2fs}
84 export E2LABEL=${E2LABEL:-e2label}
85 export DUMPE2FS=${DUMPE2FS:-dumpe2fs}
86 export E2FSCK=${E2FSCK:-e2fsck}
88 #[ -d /r ] && export ROOT=${ROOT:-/r}
89 export TMP=${TMP:-$ROOT/tmp}
90 export TESTSUITELOG=${TMP}/${TESTSUITE}.log
91 export HOSTNAME=${HOSTNAME:-`hostname`}
92 if ! echo $PATH | grep -q $LUSTRE/utils; then
93 export PATH=$PATH:$LUSTRE/utils
95 if ! echo $PATH | grep -q $LUSTRE/utils/gss; then
96 export PATH=$PATH:$LUSTRE/utils/gss
98 if ! echo $PATH | grep -q $LUSTRE/tests; then
99 export PATH=$PATH:$LUSTRE/tests
101 export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mpi/mdsrate"}
102 [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate 2> /dev/null)
103 if ! echo $PATH | grep -q $LUSTRE/tests/racer; then
104 export PATH=$PATH:$LUSTRE/tests/racer
106 if ! echo $PATH | grep -q $LUSTRE/tests/mpi; then
107 export PATH=$PATH:$LUSTRE/tests/mpi
109 export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
110 [ ! -f "$LCTL" ] && export LCTL=$(which lctl)
111 export LFS=${LFS:-"$LUSTRE/utils/lfs"}
112 [ ! -f "$LFS" ] && export LFS=$(which lfs)
113 export L_GETIDENTITY=${L_GETIDENTITY:-"$LUSTRE/utils/l_getidentity"}
114 if [ ! -f "$L_GETIDENTITY" ]; then
115 if `which l_getidentity > /dev/null 2>&1`; then
116 export L_GETIDENTITY=$(which l_getidentity)
118 export L_GETIDENTITY=NONE
121 export MKFS=${MKFS:-"$LUSTRE/utils/mkfs.lustre"}
122 [ ! -f "$MKFS" ] && export MKFS=$(which mkfs.lustre)
123 export TUNEFS=${TUNEFS:-"$LUSTRE/utils/tunefs.lustre"}
124 [ ! -f "$TUNEFS" ] && export TUNEFS=$(which tunefs.lustre)
125 export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
126 export FSTYPE=${FSTYPE:-"ldiskfs"}
127 export NAME=${NAME:-local}
128 export LGSSD=${LGSSD:-"$LUSTRE/utils/gss/lgssd"}
129 [ "$GSS_PIPEFS" = "true" ] && [ ! -f "$LGSSD" ] && \
130 export LGSSD=$(which lgssd)
131 export LSVCGSSD=${LSVCGSSD:-"$LUSTRE/utils/gss/lsvcgssd"}
132 [ ! -f "$LSVCGSSD" ] && export LSVCGSSD=$(which lsvcgssd 2> /dev/null)
133 export KRB5DIR=${KRB5DIR:-"/usr/kerberos"}
135 export SAVE_PWD=${SAVE_PWD:-$LUSTRE/tests}
138 if [ "$ACCEPTOR_PORT" ]; then
139 export PORT_OPT="--port $ACCEPTOR_PORT"
144 echo "Using GSS/krb5 ptlrpc security flavor"
145 which lgss_keyring > /dev/null 2>&1 || \
146 error "built with gss disabled! SEC=$SEC"
157 IDENTITY_UPCALL=false
161 # Paths on remote nodes, if different
162 export RLUSTRE=${RLUSTRE:-$LUSTRE}
163 export RPWD=${RPWD:-$PWD}
164 export I_MOUNTED=${I_MOUNTED:-"no"}
168 while getopts "rvwf:" opt $*; do
171 r) REFORMAT=--reformat;;
173 w) WRITECONF=writeconf;;
178 shift $((OPTIND - 1))
181 [ "$TESTSUITELOG" ] && rm -f $TESTSUITELOG || true
187 2.4.*) EXT=".o"; USE_QUOTA=no; [ ! "$CLIENTONLY" ] && FSTYPE=ext3;;
188 *) EXT=".ko"; USE_QUOTA=yes;;
195 BASE=`basename $module $EXT`
196 lsmod | grep -q ${BASE} || \
197 if [ -f ${LUSTRE}/${module}${EXT} ]; then
198 insmod ${LUSTRE}/${module}${EXT} $@
200 # must be testing a "make install" or "rpm" installation
201 # note failed to load ptlrpc_gss is considered not fatal
202 if [ "$BASE" == "ptlrpc_gss" ]; then
203 modprobe $BASE $@ 2>/dev/null || echo "gss/krb5 is not supported"
211 if [ -n "$MODPROBE" ]; then
215 if [ "$HAVE_MODULES" = true ]; then
221 echo Loading modules from $LUSTRE
222 load_module ../libcfs/libcfs/libcfs
223 [ "$PTLDEBUG" ] && lctl set_param debug="$PTLDEBUG"
224 [ "$SUBSYSTEM" ] && lctl set_param subsystem_debug="${SUBSYSTEM# }"
226 [ -f /etc/modprobe.conf ] && MODPROBECONF=/etc/modprobe.conf
227 [ ! "$MODPROBECONF" -a -d /etc/modprobe.d ] && MODPROBECONF=/etc/modprobe.d/Lustre
228 [ -z "$LNETOPTS" -a "$MODPROBECONF" ] && \
229 LNETOPTS=$(awk '/^options lnet/ { print $0}' $MODPROBECONF | sed 's/^options lnet //g')
230 echo $LNETOPTS | grep -q "accept=all" || LNETOPTS="$LNETOPTS accept=all";
231 echo "lnet options: '$LNETOPTS'"
232 # note that insmod will ignore anything in modprobe.conf
233 load_module ../lnet/lnet/lnet $LNETOPTS
234 LNETLND=${LNETLND:-"socklnd/ksocklnd"}
235 load_module ../lnet/klnds/$LNETLND
236 load_module lvfs/lvfs
237 load_module obdclass/obdclass
238 load_module ptlrpc/ptlrpc
239 load_module ptlrpc/gss/ptlrpc_gss
240 [ "$USE_QUOTA" = "yes" -a "$LQUOTA" != "no" ] && load_module quota/lquota
248 if [ -z "$CLIENTONLY" ] && [ -z "$CLIENTMODSONLY" ]; then
249 grep -q crc16 /proc/kallsyms || { modprobe crc16 2>/dev/null || true; }
250 grep -q jbd /proc/kallsyms || { modprobe jbd 2>/dev/null || true; }
251 [ "$FSTYPE" = "ldiskfs" ] && load_module ../ldiskfs/ldiskfs/ldiskfs
256 load_module lvfs/fsfilt_$FSTYPE
260 load_module obdfilter/obdfilter
263 load_module llite/lustre
264 load_module llite/llite_lloop
265 [ -d /r ] && OGDB=${OGDB:-"/r/tmp"}
267 rm -f $OGDB/ogdb-$HOSTNAME
268 $LCTL modules > $OGDB/ogdb-$HOSTNAME
270 # 'mount' doesn't look in $PATH, just sbin
271 [ -f $LUSTRE/utils/mount.lustre ] && cp $LUSTRE/utils/mount.lustre /sbin/. || true
275 if [ `uname -r | cut -c 3` -eq 4 ]; then
283 MODULES=$($LCTL modules | awk '{ print $2 }')
284 while [ -n "$MODULES" ]; do
286 $RMMOD $MODULES > /dev/null 2>&1 || true
287 MODULES=$($LCTL modules | awk '{ print $2 }')
288 if [ -z "$MODULES" ]; then
292 echo "waiting, $((MAX - WAIT)) secs left"
294 if [ $WAIT -eq $MAX ]; then
295 echo "LNET modules $MODULES will not unload"
302 unload_dep_module() {
304 #libcfs 107852 17 llite_lloop,lustre,obdfilter,ost,...
306 local DEPS=$(lsmod | awk '($1 == "'$MODULE'") { print $4 }' | tr ',' ' ')
307 for SUBMOD in $DEPS; do
308 unload_dep_module $SUBMOD
310 [ "$MODULE" = "libcfs" ] && $LCTL dk $TMP/debug || true
311 $RMMOD $MODULE || true
315 LEAK_LUSTRE=$(dmesg | tail -n 30 | grep "obd_memory.*leaked" || true)
316 LEAK_PORTALS=$(dmesg | tail -n 20 | grep "Portals memory leaked" || true)
317 if [ "$LEAK_LUSTRE" -o "$LEAK_PORTALS" ]; then
318 echo "$LEAK_LUSTRE" 1>&2
319 echo "$LEAK_PORTALS" 1>&2
320 mv $TMP/debug $TMP/debug-leak.`date +%s` || true
321 echo "Memory leaks detected"
322 [ -n "$IGNORE_LEAK" ] && { echo "ignoring leaks" && return 0; } || true
328 wait_exit_ST client # bug 12845
330 lsmod | grep libcfs > /dev/null && $LCTL dl
331 unload_dep_module $FSTYPE
332 unload_dep_module libcfs
334 local MODULES=$($LCTL modules | awk '{ print $2 }')
335 if [ -n "$MODULES" ]; then
336 echo "Modules still loaded: "
338 if [ "$(lctl dl)" ]; then
339 echo "Lustre still loaded"
344 echo "Lustre stopped but LNET is still loaded, waiting..."
345 wait_for_lnet || return 3
351 check_mem_leak || return 254
353 echo "modules unloaded."
357 check_gss_daemon_facet() {
361 num=`do_facet $facet ps -o cmd -C $dname | grep $dname | wc -l`
362 if [ $num -ne 1 ]; then
363 echo "$num instance of $dname on $facet"
372 do_facet $facet "killall -2 $@ 2>/dev/null || true"
375 start_gss_daemons() {
377 for num in `seq $MDSCOUNT`; do
378 do_facet mds$num "$LSVCGSSD -v"
380 do_facet mds$num "$LGSSD -v"
384 for num in `seq $OSTCOUNT`; do
385 do_facet ost$num "$LSVCGSSD -v"
388 # FIXME: is "client" the right facet name?
390 do_facet client "$LGSSD -v"
393 # wait daemons entering "stable" status
397 # check daemons are running
399 for num in `seq $MDSCOUNT`; do
400 check_gss_daemon_facet mds$num lsvcgssd
402 check_gss_daemon_facet mds$num lgssd
405 for num in `seq $OSTCOUNT`; do
406 check_gss_daemon_facet ost$num lsvcgssd
409 check_gss_daemon_facet client lgssd
414 for num in `seq $MDSCOUNT`; do
415 send_sigint mds$num lsvcgssd lgssd
417 for num in `seq $OSTCOUNT`; do
418 send_sigint ost$num lsvcgssd
420 send_sigint client lgssd
427 if [ -n "$LGSS_KEYRING_DEBUG" ]; then
428 echo $LGSS_KEYRING_DEBUG > /proc/fs/lustre/sptlrpc/gss/lgss_keyring/debug_level
436 # maybe cleanup credential cache?
442 local device=`mdsdevname $num`
443 local label=`do_facet mds$num "e2label ${device}" | grep -v "CMD: "`
449 local device=`ostdevname $num`
450 local label=`do_facet ost$num "e2label ${device}" | grep -v "CMD: "`
458 local dev=$(facet_active $facet)_dev
459 local opt=${facet}_opt
460 echo "Starting ${facet}: ${!opt} $@ ${!dev} ${MOUNT%/*}/${facet}"
461 do_facet ${facet} mount -t lustre ${!opt} $@ ${!dev} ${MOUNT%/*}/${facet}
463 if [ $RC -ne 0 ]; then
464 echo "mount -t lustre $@ ${!dev} ${MOUNT%/*}/${facet}"
465 echo "Start of ${!dev} on ${facet} failed ${RC}"
467 do_facet ${facet} "lctl set_param debug=\\\"$PTLDEBUG\\\"; \
468 lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\"; \
469 lctl set_param debug_mb=${DEBUG_SIZE}; \
472 label=$(do_facet ${facet} "$E2LABEL ${!dev}")
473 [ -z "$label" ] && echo no label for ${!dev} && exit 1
474 eval export ${facet}_svc=${label}
475 echo Started ${label}
480 # start facet device options
486 eval export ${facet}_dev=${device}
487 eval export ${facet}_opt=\"$@\"
489 local varname=${facet}failover_dev
490 if [ -n "${!varname}" ] ; then
491 eval export ${facet}failover_dev=${!varname}
493 eval export ${facet}failover_dev=$device
496 do_facet ${facet} mkdir -p ${MOUNT%/*}/${facet}
506 HOST=`facet_active_host $facet`
507 [ -z $HOST ] && echo stop: no host for $facet && return 0
509 running=$(do_facet ${facet} "grep -c ${MOUNT%/*}/${facet}' ' /proc/mounts") || true
510 if [ ${running} -ne 0 ]; then
511 echo "Stopping ${MOUNT%/*}/${facet} (opts:$@)"
512 do_facet ${facet} umount -d $@ ${MOUNT%/*}/${facet}
515 # umount should block, but we should wait for unrelated obd's
516 # like the MGS or MGC to also stop.
517 wait_exit_ST ${facet}
520 # save quota version (both administrative and operational quotas)
521 # add an additional parameter if mountpoint is ever different from $MOUNT
522 quota_save_version() {
523 local fsname=${2:-$FSNAME}
525 local ver=$(tr -c -d "123" <<< $spec)
526 local type=$(tr -c -d "ug" <<< $spec)
528 [ -n "$ver" -a "$ver" != "3" ] && error "wrong quota version specifier"
530 $LFS quotaoff -ug $MOUNT # just in case
531 [ -n "$type" ] && { $LFS quotacheck -$type $MOUNT || error "quotacheck has failed"; }
533 do_facet mgs "lctl conf_param ${fsname}-MDT*.mdd.quota_type=$spec"
535 local osts=$(get_facets OST)
536 for ost in ${osts//,/ }; do
538 do_facet mgs "lctl conf_param ${!varsvc}.ost.quota_type=$spec"
542 # client could mount several lustre
544 local fsname=${1:-$FSNAME}
546 do_facet mgs lctl get_param mdd.${fsname}-MDT*.quota_type || rc=$?
547 do_nodes $(comma_list $(osts_nodes)) \
548 lctl get_param obdfilter.${fsname}-OST*.quota_type || rc=$?
552 restore_quota_type () {
553 local mntpt=${1:-$MOUNT}
554 local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
555 if [ ! "$old_QUOTA_TYPE" ] || [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
558 quota_save_version $old_QUOTA_TYPE
565 # 1. run quotacheck only if quota is off
566 # 2. save the original quota_type params, restore them after testing
568 # Suppose that quota type the same on mds and ost
569 local quota_type=$(quota_type | grep MDT | cut -d "=" -f2)
570 [ ${PIPESTATUS[0]} -eq 0 ] || error "quota_type failed!"
571 if [ "$quota_type" != "$QUOTA_TYPE" ]; then
572 export old_QUOTA_TYPE=$quota_type
573 quota_save_version $QUOTA_TYPE
576 local quota_usrs=$QUOTA_USERS
578 # get_filesystem_size
579 local disksz=$(lfs df $mntpt | grep "filesystem summary:" | awk '{print $3}')
580 local blk_soft=$((disksz + 1024))
581 local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
583 local Inodes=$(lfs df -i $mntpt | grep "filesystem summary:" | awk '{print $3}')
585 local i_hard=$((i_soft + i_soft / 20))
587 echo "Total disk size: $disksz block-softlimit: $blk_soft block-hardlimit:
588 $blk_hard inode-softlimit: $i_soft inode-hardlimit: $i_hard"
591 for usr in $quota_usrs; do
592 echo "Setting up quota on $client:$mntpt for $usr..."
594 cmd="$LFS setquota -$type $usr -b $blk_soft -B $blk_hard -i $i_soft -I $i_hard $mntpt"
596 eval $cmd || error "$cmd FAILED!"
598 # display the quota status
599 echo "Quota settings for $usr : "
600 $LFS quota -v -u $usr $mntpt || true
608 # Only supply -o to mount if we have options
609 if [ -n "$MOUNTOPT" ]; then
610 OPTIONS="-o $MOUNTOPT"
612 local device=$MGSNID:/$FSNAME
613 if [ -z "$mnt" -o -z "$FSNAME" ]; then
614 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
618 echo "Starting client: $client: $OPTIONS $device $mnt"
619 do_node $client mkdir -p $mnt
620 do_node $client mount -t lustre $OPTIONS $device $mnt || return 1
622 do_node $client "lctl set_param debug=\\\"$PTLDEBUG\\\";
623 lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\";
624 lctl set_param debug_mb=${DEBUG_SIZE}"
637 local running=$(do_node $client "grep -c $mnt' ' /proc/mounts") || true
638 if [ $running -ne 0 ]; then
639 echo "Stopping client $client $mnt (opts:$force)"
640 do_node $client lsof -t $mnt || need_kill=no
641 if [ "x$force" != "x" -a "x$need_kill" != "xno" ]; then
642 pids=$(do_node $client lsof -t $mnt | sort -u);
643 if [ -n $pids ]; then
644 do_node $client kill -9 $pids || true
648 busy=$(do_node $client "umount $force $mnt 2>&1" | grep -c "busy") || true
649 if [ $busy -ne 0 ] ; then
650 echo "$mnt is still busy, wait one second" && sleep 1
651 do_node $client umount $force $mnt
656 # nodes is comma list
657 sanity_mount_check_nodes () {
663 # FIXME: assume that all cluster nodes run the same os
664 [ "$(uname)" = Linux ] || return 0
667 for mnt in $mnts ; do
668 do_nodes $nodes "set -x; running=\\\$(grep -c $mnt' ' /proc/mounts);
669 mpts=\\\$(mount | grep -w -c $mnt);
670 if [ \\\$running -ne \\\$mpts ]; then
671 echo \\\$(hostname) env are INSANE!;
679 sanity_mount_check_servers () {
681 { echo "CLIENTONLY mode, skip mount_check_servers"; return 0; } || true
682 echo Checking servers environments
684 # FIXME: modify get_facets to display all facets wo params
685 local facets="$(get_facets OST),$(get_facets MDS)"
689 for facet in ${facets//,/ }; do
690 node=$(facet_host ${facet})
691 mnt=${MOUNT%/*}/${facet}
692 sanity_mount_check_nodes $node $mnt ||
693 { error "server $node environments are insane!"; return 1; }
697 sanity_mount_check_clients () {
698 local clients=${1:-$CLIENTS}
699 local mntpt=${2:-$MOUNT}
700 local mntpt2=${3:-$MOUNT2}
702 [ -z $clients ] && clients=$(hostname)
703 echo Checking clients $clients environments
705 sanity_mount_check_nodes $clients $mntpt $mntpt2 ||
706 error "clients environments are insane!"
709 sanity_mount_check () {
710 sanity_mount_check_servers || return 1
711 sanity_mount_check_clients || return 2
714 # mount clients if not mouted
715 zconf_mount_clients() {
721 # Only supply -o to mount if we have options
722 if [ -n "$MOUNTOPT" ]; then
723 OPTIONS="-o $MOUNTOPT"
725 local device=$MGSNID:/$FSNAME
726 if [ -z "$mnt" -o -z "$FSNAME" ]; then
727 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
731 echo "Starting client $clients: $OPTIONS $device $mnt"
733 do_nodes $clients "set -x;
734 running=\\\$(mount | grep -c $mnt' ');
736 if [ \\\$running -eq 0 ] ; then
738 mount -t lustre $OPTIONS $device $mnt;
743 echo "Started clients $clients: "
744 do_nodes $clients "mount | grep -w $mnt"
746 do_nodes $clients "lctl set_param debug=\\\"$PTLDEBUG\\\";
747 lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\";
748 lctl set_param debug_mb=${DEBUG_SIZE};"
753 zconf_umount_clients() {
760 echo "Stopping clients: $clients $mnt (opts:$force)"
761 do_nodes $clients "set -x; running=\\\$(grep -c $mnt' ' /proc/mounts);
762 if [ \\\$running -ne 0 ] ; then
763 echo Stopping client \\\$(hostname) client $mnt opts:$force;
764 lsof -t $mnt || need_kill=no;
765 if [ "x$force" != "x" -a "x\\\$need_kill" != "xno" ]; then
766 pids=\\\$(lsof -t $mnt | sort -u);
767 if [ -n \\\"\\\$pids\\\" ]; then
771 busy=\\\$(umount $force $mnt 2>&1 | grep -c "busy");
772 if [ \\\$busy -ne 0 ] ; then
773 echo "$mnt is still busy, wait one second" && sleep 1;
779 shudown_node_hard () {
783 for i in $(seq $attempts) ; do
786 ping -w 3 -c 1 $host > /dev/null 2>&1 || return 0
787 echo "waiting for $host to fail attempts=$attempts"
788 [ $i -lt $attempts ] || \
789 { echo "$host still pingable after power down! attempts=$attempts" && return 1; }
795 local mnt=${2:-$MOUNT}
798 if [ "$FAILURE_MODE" = HARD ]; then
799 shudown_node_hard $client
801 zconf_umount_clients $client $mnt -f
807 if [ "$FAILURE_MODE" = HARD ]; then
808 shudown_node_hard $(facet_active_host $facet)
809 elif [ "$FAILURE_MODE" = SOFT ]; then
816 if [ "$FAILURE_MODE" = HARD ]; then
817 $POWER_UP `facet_active_host $facet`
825 if [ "$FAILURE_MODE" = HARD ]; then
830 # recovery-scale functions
831 check_progs_installed () {
836 do_nodes $clients "set -x ; PATH=:$PATH status=true; for prog in $progs; do
837 which \\\$prog || { echo \\\$prog missing on \\\$(hostname) && status=false; }
843 echo __$(echo $1 | tr '-' 'X')
846 start_client_load() {
849 local var=$(client_var_name $client)_load
850 eval export ${var}=$load
852 do_node $client "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
853 BREAK_ON_ERROR=$BREAK_ON_ERROR \
854 END_RUN_FILE=$END_RUN_FILE \
855 LOAD_PID_FILE=$LOAD_PID_FILE \
856 TESTSUITELOG=$TESTSUITELOG \
858 CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $!"
859 log "Started client load: ${load} on $client"
864 start_client_loads () {
865 local -a clients=(${1//,/ })
866 local numloads=${#CLIENT_LOADS[@]}
869 for ((nodenum=0; nodenum < ${#clients[@]}; nodenum++ )); do
870 testnum=$((nodenum % numloads))
871 start_client_load ${clients[nodenum]} ${CLIENT_LOADS[testnum]}
875 # only for remote client
876 check_client_load () {
878 local var=$(client_var_name $client)_load
879 local TESTLOAD=run_${!var}.sh
881 ps auxww | grep -v grep | grep $client | grep -q "$TESTLOAD" || return 1
883 # bug 18914: try to connect several times not only when
884 # check ps, but while check_catastrophe also
887 while [ $RC = 254 -a $tries -gt 0 ]; do
891 if ! check_catastrophe $client; then
893 if [ $RC -eq 254 ]; then
894 # FIXME: not sure how long we shuold sleep here
898 echo "check catastrophe failed: RC=$RC "
902 # We can continue try to connect if RC=254
903 # Just print the warning about this
904 if [ $RC = 254 ]; then
905 echo "got a return status of $RC from do_node while checking catastrophe on $client"
908 # see if the load is still on the client
911 while [ $RC = 254 -a $tries -gt 0 ]; do
915 if ! do_node $client "ps auxwww | grep -v grep | grep -q $TESTLOAD"; then
920 if [ $RC = 254 ]; then
921 echo "got a return status of $RC from do_node while checking (catastrophe and 'ps') the client load on $client"
922 # see if we can diagnose a bit why this is
927 check_client_loads () {
928 local clients=${1//,/ }
932 for client in $clients; do
933 check_client_load $client
935 if [ "$rc" != 0 ]; then
936 log "Client load failed on node $client, rc=$rc"
942 restart_client_loads () {
943 local clients=${1//,/ }
944 local expectedfail=${2:-""}
948 for client in $clients; do
949 check_client_load $client
951 if [ "$rc" != 0 -a "$expectedfail" ]; then
952 start_client_load $client
953 echo "Restarted client load: on $client. Checking ..."
954 check_client_load $client
956 if [ "$rc" != 0 ]; then
957 log "Client load failed to restart on node $client, rc=$rc"
958 # failure one client load means test fail
959 # we do not need to check other
967 # End recovery-scale functions
969 # verify that lustre actually cleaned up properly
971 [ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && \
972 error "LBUG/LASSERT detected"
973 BUSY=`dmesg | grep -i destruct || true`
976 [ -e $TMP/debug ] && mv $TMP/debug $TMP/debug-busy.`date +%s`
980 check_mem_leak || exit 204
982 [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl && \
983 echo "$0: lustre didn't clean up..." 1>&2 && return 202 || true
985 if [ "`/sbin/lsmod 2>&1 | egrep 'lnet|libcfs'`" ]; then
986 echo "$0: modules still loaded..." 1>&2
1003 RESULT=$(do_node $node "$TEST")
1004 if [ "$RESULT" == "$FINAL" ]; then
1005 echo "Updated after $WAIT sec: wanted '$FINAL' got '$RESULT'"
1008 [ $WAIT -ge $MAX ] && break
1009 echo "Waiting $((MAX - WAIT)) secs for update"
1010 WAIT=$((WAIT + sleep))
1013 echo "Update not seen after $MAX sec: wanted '$FINAL' got '$RESULT'"
1017 wait_update_facet () {
1019 wait_update $(facet_active_host $facet) "$@"
1022 wait_delete_completed () {
1023 local TOTALPREV=`lctl get_param -n osc.*.kbytesavail | \
1024 awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
1028 while [ "$WAIT" -ne "$MAX_WAIT" ]; do
1030 TOTAL=`lctl get_param -n osc.*.kbytesavail | \
1031 awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
1032 [ "$TOTAL" -eq "$TOTALPREV" ] && break
1033 echo "Waiting delete completed ... prev: $TOTALPREV current: $TOTAL "
1037 echo "Delete completed."
1042 check_network "$host" 900
1043 while ! do_node $host "ls -d $LUSTRE " > /dev/null; do sleep 5; done
1048 local host=`facet_active_host $facet`
1052 wait_recovery_complete () {
1055 # Use default policy if $2 is not passed by caller.
1056 #define OBD_RECOVERY_TIMEOUT (obd_timeout * 5 / 2)
1057 # as we are in process of changing obd_timeout in different ways
1058 # let's set MAX longer than that
1059 local MAX=${2:-$(( TIMEOUT * 4 ))}
1061 local var_svc=${facet}_svc
1062 local procfile="*.${!var_svc}.recovery_status"
1066 while [ $WAIT -lt $MAX ]; do
1067 STATUS=$(do_facet $facet lctl get_param -n $procfile | grep status)
1068 [[ $STATUS = "status: COMPLETE" ]] && return 0
1071 echo "Waiting $((MAX - WAIT)) secs for $facet recovery done. $STATUS"
1073 echo "$facet recovery not done in $MAX sec. $STATUS"
1083 # conf-sanity 31 takes a long time cleanup
1084 while [ $WAIT -lt 300 ]; do
1085 running=$(do_facet ${facet} "lsmod | grep lnet > /dev/null && lctl dl | grep ' ST '") || true
1086 [ -z "${running}" ] && return 0
1087 echo "waited $WAIT for${running}"
1088 [ $INTERVAL -lt 64 ] && INTERVAL=$((INTERVAL + INTERVAL))
1090 WAIT=$((WAIT + INTERVAL))
1092 echo "service didn't stop after $WAIT seconds. Still running:"
1097 wait_remote_prog () {
1103 [ "$PDSH" = "no_dsh" ] && return 0
1105 while [ $WAIT -lt $2 ]; do
1106 running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep) || true
1107 [ -z "${running}" ] && return 0 || true
1108 echo "waited $WAIT for: "
1110 [ $INTERVAL -lt 60 ] && INTERVAL=$((INTERVAL + INTERVAL))
1112 WAIT=$((WAIT + INTERVAL))
1114 local pids=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep | awk '{print $2}')
1115 [ -z "$pids" ] && return 0
1116 echo "$PDSH processes still exists after $WAIT seconds. Still running: $pids"
1117 # FIXME: not portable
1118 for pid in $pids; do
1119 cat /proc/${pid}/status || true
1120 cat /proc/${pid}/wchan || true
1122 kill -9 $pid || true
1131 # not every config has many clients
1132 if [ ! -z "$CLIENTS" ]; then
1133 $PDSH $CLIENTS "df $MOUNT" > /dev/null
1135 df $MOUNT > /dev/null
1139 client_reconnect() {
1140 uname -n >> $MOUNT/recon
1141 if [ -z "$CLIENTS" ]; then
1142 df $MOUNT; uname -n >> $MOUNT/recon
1144 do_nodes $CLIENTS "df $MOUNT; uname -n >> $MOUNT/recon" > /dev/null
1146 echo Connected clients:
1148 ls -l $MOUNT/recon > /dev/null
1155 echo "Failing $facet on node `facet_active_host $facet`"
1156 shutdown_facet $facet
1157 [ -n "$sleep_time" ] && sleep $sleep_time
1161 echo "df pid is $DFPID"
1162 change_active $facet
1163 local TO=`facet_active_host $facet`
1164 echo "Failover $facet to $TO"
1166 mount_facet $facet || error "Restart of $facet failed"
1175 do_facet $facet sync
1177 local svc=${facet}_svc
1178 do_facet $facet $LCTL --device %${!svc} notransno
1179 do_facet $facet $LCTL --device %${!svc} readonly
1180 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
1181 $LCTL mark "local REPLAY BARRIER on ${!svc}"
1184 replay_barrier_nodf() {
1185 local facet=$1 echo running=${running}
1186 do_facet $facet sync
1187 local svc=${facet}_svc
1188 echo Replay barrier on ${!svc}
1189 do_facet $facet $LCTL --device %${!svc} notransno
1190 do_facet $facet $LCTL --device %${!svc} readonly
1191 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
1192 $LCTL mark "local REPLAY BARRIER on ${!svc}"
1195 replay_barrier_nosync() {
1196 local facet=$1 echo running=${running}
1197 local svc=${facet}_svc
1198 echo Replay barrier on ${!svc}
1199 do_facet $facet $LCTL --device %${!svc} notransno
1200 do_facet $facet $LCTL --device %${!svc} readonly
1201 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
1202 $LCTL mark "local REPLAY BARRIER on ${!svc}"
1205 mds_evict_client() {
1206 UUID=`lctl get_param -n mdc.${mds1_svc}-mdc-*.uuid`
1207 do_facet mds1 "lctl set_param -n mdt.${mds1_svc}.evict_client $UUID"
1210 ost_evict_client() {
1211 UUID=`lctl get_param -n devices| grep ${ost1_svc}-osc- | egrep -v 'MDT' | awk '{print $5}'`
1212 do_facet ost1 "lctl set_param -n obdfilter.${ost1_svc}.evict_client $UUID"
1216 facet_failover $* || error "failover: $?"
1217 df $MOUNT || error "post-failover df: $?"
1222 facet_failover $facet
1228 change_active $facet
1229 mount_facet $facet -o abort_recovery
1230 df $MOUNT || echo "first df failed: $?"
1232 df $MOUNT || error "post-failover df: $?"
1236 echo There is no lmc. This is mountconf, baby.
1241 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
1242 ID=`$PDSH $1 $GMNALNID -l | cut -d\ -f2`
1248 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
1254 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
1255 ID=`xtprocadmin -n $1 2>/dev/null | egrep -v 'NID' | awk '{print $1}'`
1256 if [ -z "$ID" ]; then
1257 echo "Could not get a ptl id for $1..."
1266 h2name_or_ip "$1" "tcp"
1271 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
1272 if type __h2elan >/dev/null 2>&1; then
1275 ID=`echo $1 | sed 's/[^0-9]*//g'`
1283 h2name_or_ip "$1" "openib"
1285 declare -fx h2openib
1288 h2name_or_ip "$1" "o2ib"
1295 [ "$facet" == client ] && echo -n $HOSTNAME && return
1296 varname=${facet}_HOST
1297 if [ -z "${!varname}" ]; then
1298 if [ "${facet:0:3}" == "ost" ]; then
1299 eval ${facet}_HOST=${ost_HOST}
1307 local activevar=${facet}active
1309 if [ -f $TMP/${facet}active ] ; then
1310 source $TMP/${facet}active
1313 active=${!activevar}
1314 if [ -z "$active" ] ; then
1321 facet_active_host() {
1323 local active=`facet_active $facet`
1324 if [ "$facet" == client ]; then
1327 echo `facet_host $active`
1333 local failover=${facet}failover
1334 host=`facet_host $failover`
1335 [ -z "$host" ] && return
1336 local curactive=`facet_active $facet`
1337 if [ -z "${curactive}" -o "$curactive" == "$failover" ] ; then
1338 eval export ${facet}active=$facet
1340 eval export ${facet}active=$failover
1342 # save the active host for this facet
1343 local activevar=${facet}active
1344 echo "$activevar=${!activevar}" > $TMP/$activevar
1351 if [ "$HOST" = "$HOSTNAME" ]; then
1353 elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
1354 echo "cannot run remote command on $HOST with $myPDSH"
1358 echo "CMD: $HOST $@" >&2
1359 $myPDSH $HOST $LCTL mark "$@" > /dev/null 2>&1 || :
1362 if [ "$myPDSH" = "rsh" ]; then
1363 # we need this because rsh does not return exit code of an executed command
1364 local command_status="$TMP/cs"
1365 rsh $HOST ":> $command_status"
1366 rsh $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin;
1367 cd $RPWD; sh -c \"$@\") ||
1368 echo command failed >$command_status"
1369 [ -n "$($myPDSH $HOST cat $command_status)" ] && return 1 || true
1372 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; sh -c \"$@\")" | sed "s/^${HOST}: //"
1373 return ${PIPESTATUS[0]}
1376 single_local_node () {
1377 [ "$1" = "$HOSTNAME" ]
1384 if $(single_local_node $rnodes); then
1389 # This is part from do_node
1392 [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] && \
1393 echo "cannot run remote command on $rnodes with $myPDSH" && return 128
1396 echo "CMD: $rnodes $@" >&2
1397 $myPDSH $rnodes $LCTL mark "$@" > /dev/null 2>&1 || :
1400 $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; sh -c \"$@\")" | sed -re "s/\w+:\s//g"
1401 return ${PIPESTATUS[0]}
1407 local HOST=`facet_active_host $facet`
1408 [ -z $HOST ] && echo No host defined for facet ${facet} && exit 1
1415 # make sure its not already running
1417 rm -f $TMP/${facet}active
1418 do_facet ${facet} $MKFS $*
1424 #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
1425 eval DEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}}
1432 #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
1433 eval DEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}}
1441 # make sure we are using the primary server, so test-framework will
1442 # be able to clean up properly.
1443 activemds=`facet_active mds1`
1444 if [ $activemds != "mds1" ]; then
1448 local clients=$CLIENTS
1449 [ -z $clients ] && clients=$(hostname)
1451 zconf_umount_clients $clients $MOUNT "$*" || true
1452 [ -n "$MOUNT2" ] && zconf_umount_clients $clients $MOUNT2 "$*" || true
1454 [ "$CLIENTONLY" ] && return
1455 # The add fn does rm ${facet}active file, this would be enough
1456 # if we use do_facet <facet> only after the facet added, but
1457 # currently we use do_facet mds in local.sh
1458 for num in `seq $MDSCOUNT`; do
1460 rm -f ${TMP}/mds${num}active
1463 for num in `seq $OSTCOUNT`; do
1465 rm -f $TMP/ost${num}active
1480 test $nr = 1 && echo -n $MDS_MKFS_OPTS || echo -n $MDSn_MKFS_OPTS
1484 if [ "$IAMDIR" == "yes" ]; then
1485 MDS_MKFS_OPTS="$MDS_MKFS_OPTS --iam-dir"
1486 MDSn_MKFS_OPTS="$MDSn_MKFS_OPTS --iam-dir"
1489 [ "$FSTYPE" ] && FSTYPE_OPT="--backfstype $FSTYPE"
1491 if [ ! -z $SEC ]; then
1492 MDS_MKFS_OPTS="$MDS_MKFS_OPTS --param srpc.flavor.default=$SEC"
1493 MDSn_MKFS_OPTS="$MDSn_MKFS_OPTS --param srpc.flavor.default=$SEC"
1494 OST_MKFS_OPTS="$OST_MKFS_OPTS --param srpc.flavor.default=$SEC"
1498 # We need ldiskfs here, may as well load them all
1500 [ "$CLIENTONLY" ] && return
1501 echo "Formatting mdts, osts"
1502 for num in `seq $MDSCOUNT`; do
1503 echo "Format mds$num: $(mdsdevname $num)"
1505 add mds$num `mdsmkfsopts $num` $FSTYPE_OPT --reformat `mdsdevname $num` || exit 9
1507 add mds$num `mdsmkfsopts $num` $FSTYPE_OPT --reformat `mdsdevname $num` > /dev/null || exit 9
1511 for num in `seq $OSTCOUNT`; do
1512 echo "Format ost$num: $(ostdevname $num)"
1514 add ost$num $OST_MKFS_OPTS --reformat `ostdevname $num` || exit 10
1516 add ost$num $OST_MKFS_OPTS --reformat `ostdevname $num` > /dev/null || exit 10
1522 grep " $1 " /proc/mounts || zconf_mount $HOSTNAME $*
1526 grep " $1 " /proc/mounts && zconf_umount `hostname` $*
1530 # 0: success, the old identity set already.
1531 # 1: success, the old identity does not set.
1536 local j=`expr $num - 1`
1537 local MDT="`(do_facet mds$num lctl get_param -N mdt.*MDT*$j 2>/dev/null | cut -d"." -f2 2>/dev/null) || true`"
1539 if [ -z "$MDT" ]; then
1543 local old="`do_facet mds$num "lctl get_param -n mdt.$MDT.identity_upcall"`"
1546 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"$L_GETIDENTITY\""
1548 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"NONE\""
1551 do_facet mds$num "lctl set_param -n mdt/$MDT/identity_flush \"-1\""
1553 if [ $old = "NONE" ]; then
1562 zconf_umount `hostname` $1 || error "umount failed"
1563 zconf_mount `hostname` $1 || error "mount failed"
1566 writeconf_facet () {
1570 do_facet $facet "$TUNEFS --writeconf $dev"
1574 for num in `seq $MDSCOUNT`; do
1575 DEVNAME=$(mdsdevname $num)
1576 writeconf_facet mds$num $DEVNAME
1579 for num in `seq $OSTCOUNT`; do
1580 DEVNAME=$(ostdevname $num)
1581 writeconf_facet ost$num $DEVNAME
1586 sanity_mount_check ||
1587 error "environments are insane!"
1591 if [ -z "$CLIENTONLY" ]; then
1592 echo "Setup mdts, osts"
1593 echo $WRITECONF | grep -q "writeconf" && \
1595 for num in `seq $MDSCOUNT`; do
1596 DEVNAME=$(mdsdevname $num)
1597 start mds$num $DEVNAME $MDS_MOUNT_OPTS
1599 # We started mds, now we should set failover variables properly.
1600 # Set mds${num}failover_HOST if it is not set (the default failnode).
1601 local varname=mds${num}failover_HOST
1602 if [ -z "${!varname}" ]; then
1603 eval mds${num}failover_HOST=$(facet_host mds$num)
1606 if [ $IDENTITY_UPCALL != "default" ]; then
1607 switch_identity $num $IDENTITY_UPCALL
1610 for num in `seq $OSTCOUNT`; do
1611 DEVNAME=$(ostdevname $num)
1612 start ost$num $DEVNAME $OST_MOUNT_OPTS
1614 # We started ost$num, now we should set ost${num}failover variable properly.
1615 # Set ost${num}failover_HOST if it is not set (the default failnode).
1616 varname=ost${num}failover_HOST
1617 if [ -z "${!varname}" ]; then
1618 eval ost${num}failover_HOST=$(facet_host ost${num})
1623 # wait a while to allow sptlrpc configuration be propogated to targets,
1624 # only needed when mounting new target devices.
1627 [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
1629 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT
1631 if [ "$MOUNT_2" ]; then
1632 mount_client $MOUNT2
1633 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT2
1638 # by remounting mdt before ost, initial connect from mdt to ost might
1639 # timeout because ost is not ready yet. wait some time to its fully
1640 # recovery. initial obd_connect timeout is 5s; in GSS case it's preceeded
1641 # by a context negotiation rpc with $TIMEOUT.
1642 # FIXME better by monitoring import status.
1644 sleep $((TIMEOUT + 5))
1650 mounted_lustre_filesystems() {
1651 awk '($3 ~ "lustre" && $1 ~ ":") { print $2 }' /proc/mounts
1654 init_facet_vars () {
1655 [ "$CLIENTONLY" ] && return 0
1662 eval export ${facet}_dev=${device}
1663 eval export ${facet}_opt=\"$@\"
1665 local dev=${facet}_dev
1666 local label=$(do_facet ${facet} "$E2LABEL ${!dev}")
1667 [ -z "$label" ] && echo no label for ${!dev} && exit 1
1669 eval export ${facet}_svc=${label}
1671 local varname=${facet}failover_HOST
1672 if [ -z "${!varname}" ]; then
1673 eval $varname=$(facet_host $facet)
1676 # ${facet}failover_dev is set in cfg file
1677 varname=${facet}failover_dev
1678 if [ -n "${!varname}" ] ; then
1679 eval export ${facet}failover_dev=${!varname}
1681 eval export ${facet}failover_dev=$device
1685 init_facets_vars () {
1688 if ! remote_mds_nodsh; then
1689 for num in `seq $MDSCOUNT`; do
1690 DEVNAME=`mdsdevname $num`
1691 init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
1695 remote_ost_nodsh && return
1697 for num in `seq $OSTCOUNT`; do
1698 DEVNAME=`ostdevname $num`
1699 init_facet_vars ost$num $DEVNAME $OST_MOUNT_OPTS
1703 mds_sanity_check () {
1707 while [ $period -lt $timeout ]; do
1708 count=$(do_facet $SINGLEMDS "lctl dl | grep 'osc.*mdtlov_UUID' | grep ' IN ' 2>/dev/null | wc -l")
1709 if [ $count -eq 0 ]; then
1713 echo "There are $count OST are inactive, wait $period seconds, and try again"
1715 period=$((period+3))
1718 [ $period -lt $timeout ] || log "$count OST are inactive after $timeout seconds, give up"
1722 SOM_ENABLED=$(do_facet $SINGLEMDS "$LCTL get_param mdt.*.som" | awk -F= ' {print $2}' | head -n 1)
1726 init_param_vars () {
1727 if ! remote_ost_nodsh && ! remote_mds_nodsh; then
1728 export MDSVER=$(do_facet $SINGLEMDS "lctl get_param version" | cut -d. -f1,2)
1729 export OSTVER=$(do_facet ost1 "lctl get_param version" | cut -d. -f1,2)
1730 export CLIVER=$(lctl get_param version | cut -d. -f 1,2)
1734 TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
1736 log "Using TIMEOUT=$TIMEOUT"
1738 mds_sanity_check $TIMEOUT
1740 if [ x"$(som_check)" = x"enabled" ]; then
1743 if [ "$ENABLE_QUOTA" ]; then
1744 setup_quota $MOUNT || return 2
1751 local mounted=$(mount | grep " $mntpt ")
1752 if [ "$CLIENTONLY" ]; then
1754 # CLIENTONLY should not depend on *_HOST settings
1755 local mgc=$($LCTL device_list | awk '/MGC/ {print $4}')
1756 # in theory someone could create a new,
1757 # client-only config file that assumed lustre was already
1758 # configured and didn't set the MGSNID. If MGSNID is not set,
1759 # then we should use the mgs nid currently being used
1760 # as the default value. bug 18021
1761 [[ x$MGSNID = x ]] &&
1764 if [[ x$mgc != xMGC$MGSNID ]]; then
1765 if [ "$mgs_HOST" ]; then
1766 local mgc_ip=$(ping -q -c1 -w1 $mgs_HOST | grep PING | awk '{print $3}' | sed -e "s/(//g" -e "s/)//g")
1767 [[ x$mgc = xMGC$mgc_ip@$NETTYPE ]] ||
1768 error_exit "MGSNID=$MGSNID, mounted: $mounted, MGC : $mgc"
1774 local myMGS_host=$mgs_HOST
1775 if [ "$NETTYPE" = "ptl" ]; then
1776 myMGS_host=$(h2ptl $mgs_HOST | sed -e s/@ptl//)
1779 echo Checking config lustre mounted on $mntpt
1780 local mgshost=$(mount | grep " $mntpt " | awk -F@ '{print $1}')
1781 mgshost=$(echo $mgshost | awk -F: '{print $1}')
1783 if [ "$mgshost" != "$myMGS_host" ]; then
1784 error_exit "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST, NETTYPE=$NETTYPE
1785 Please use correct config or set mds_HOST correctly!"
1788 sanity_mount_check ||
1789 error "environments are insane!"
1793 local mdstimeout=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
1794 local cltimeout=$(lctl get_param -n timeout)
1795 if [ $mdstimeout -ne $TIMEOUT ] || [ $mdstimeout -ne $cltimeout ]; then
1796 error "timeouts are wrong! mds: $mdstimeout, client: $cltimeout, TIMEOUT=$TIMEOUT"
1801 check_and_setup_lustre() {
1802 local MOUNTED=$(mounted_lustre_filesystems)
1803 if [ -z "$MOUNTED" ] || ! $(echo $MOUNTED | grep -w -q $MOUNT); then
1804 [ "$REFORMAT" ] && formatall
1806 MOUNTED=$(mounted_lustre_filesystems | head -1)
1807 [ -z "$MOUNTED" ] && error "NAME=$NAME not mounted"
1808 export I_MOUNTED=yes
1814 if [ "$ONLY" == "setup" ]; then
1819 cleanup_and_setup_lustre() {
1820 if [ "$ONLY" == "cleanup" -o "`mount | grep $MOUNT`" ]; then
1821 lctl set_param debug=0 || true
1823 if [ "$ONLY" == "cleanup" ]; then
1827 check_and_setup_lustre
1830 check_and_cleanup_lustre() {
1831 if [ "`mount | grep $MOUNT`" ]; then
1832 [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]*
1833 [ "$ENABLE_QUOTA" ] && restore_quota_type || true
1835 if [ "$I_MOUNTED" = "yes" ]; then
1836 cleanupall -f || error "cleanup failed"
1848 while [ $NETWORK -eq 0 ]; do
1849 ping -c 1 -w 3 $1 > /dev/null
1850 if [ $? -eq 0 ]; then
1854 echo "waiting for $1, $((MAX - WAIT)) secs left"
1857 if [ $WAIT -gt $MAX ]; then
1858 echo "Network not available"
1864 while( !($DSH2 $1 "netstat -tna | grep -q $2") ) ; do
1875 # the sed converts spaces to commas, but leaves the last space
1876 # alone, so the line doesn't end with a comma.
1877 echo "$*" | tr -s " " "\n" | sort -b -u | tr "\n" " " | sed 's/ \([^$]\)/,\1/g'
1880 # list, excluded are the comma separated lists
1881 exclude_items_from_list () {
1887 for item in ${excluded//,/ }; do
1888 list=$(echo " $list " | sed -re "s/\s+$item\s+/ /g")
1890 echo $(comma_list $list)
1893 # list, expand are the comma separated lists
1895 local list=${1//,/ }
1896 local expand=${2//,/ }
1899 expanded=$(for i in $list $expand; do echo $i; done | sort -u)
1900 echo $(comma_list $expanded)
1904 (cd `dirname $1`; echo $PWD/`basename $1`)
1908 local name=$(echo $1 | tr "[:upper:]" "[:lower:]")
1909 local type=$(echo $1 | tr "[:lower:]" "[:upper:]")
1912 local count=${type}COUNT
1913 for ((i=1; i<=${!count}; i++)) do
1914 list="$list ${name}$i"
1916 echo $(comma_list $list)
1919 ##################################
1920 # Adaptive Timeouts funcs
1923 # only check mds, we assume at_max is the same on all nodes
1924 local at_max=$(do_facet $SINGLEMDS "lctl get_param -n at_max")
1925 if [ $at_max -eq 0 ]; then
1935 # suppose that all ost-s has the same at_max set
1936 if [ $facet == "ost" ]; then
1937 do_facet ost1 "lctl get_param -n at_max"
1939 do_facet $facet "lctl get_param -n at_max"
1949 if [ $facet == "ost" ]; then
1950 for i in `seq $OSTCOUNT`; do
1951 do_facet ost$i "lctl set_param at_max=$at_max"
1954 elif [ $facet == "mds" ]; then
1955 for i in `seq $MDSCOUNT`; do
1956 do_facet mds$i "lctl set_param at_max=$at_max"
1959 do_facet $facet "lctl set_param at_max=$at_max"
1964 ##################################
1968 # OBD_FAIL_MDS_ALL_REQUEST_NET
1970 do_facet $SINGLEMDS lctl set_param fail_loc=0x123
1971 do_facet client "$1" || RC=$?
1972 do_facet $SINGLEMDS lctl set_param fail_loc=0
1977 # OBD_FAIL_MDS_ALL_REPLY_NET
1979 do_facet $SINGLEMDS lctl set_param fail_loc=0x122
1980 do_facet client "$@" || RC=$?
1981 do_facet $SINGLEMDS lctl set_param fail_loc=0
1985 drop_reint_reply() {
1986 # OBD_FAIL_MDS_REINT_NET_REP
1988 do_facet $SINGLEMDS lctl set_param fail_loc=0x119
1989 do_facet client "$@" || RC=$?
1990 do_facet $SINGLEMDS lctl set_param fail_loc=0
1995 #define OBD_FAIL_OST_BRW_PAUSE_BULK 0x214
1997 do_facet ost1 lctl set_param fail_loc=0x214
1998 do_facet client "$1" || RC=$?
1999 do_facet client "sync"
2000 do_facet ost1 lctl set_param fail_loc=0
2004 drop_ldlm_cancel() {
2005 #define OBD_FAIL_LDLM_CANCEL 0x304
2007 do_facet client lctl set_param fail_loc=0x304
2008 do_facet client "$@" || RC=$?
2009 do_facet client lctl set_param fail_loc=0
2013 drop_bl_callback() {
2014 #define OBD_FAIL_LDLM_BL_CALLBACK 0x305
2016 do_facet client lctl set_param fail_loc=0x305
2017 do_facet client "$@" || RC=$?
2018 do_facet client lctl set_param fail_loc=0
2023 #define OBD_FAIL_LDLM_REPLY 0x30c
2025 do_facet $SINGLEMDS lctl set_param fail_loc=0x30c
2026 do_facet client "$@" || RC=$?
2027 do_facet $SINGLEMDS lctl set_param fail_loc=0
2035 echo "clearing fail_loc on $facet"
2036 do_facet $facet "lctl set_param fail_loc=0 2>/dev/null || true"
2039 set_nodes_failloc () {
2040 do_nodes $(comma_list $1) lctl set_param fail_loc=$2
2043 cancel_lru_locks() {
2044 $LCTL mark "cancel_lru_locks $1 start"
2045 for d in `lctl get_param -N ldlm.namespaces.*.lru_size | egrep -i $1`; do
2046 $LCTL set_param -n $d=clear
2048 $LCTL get_param ldlm.namespaces.*.lock_unused_count | egrep -i $1 | grep -v '=0'
2049 $LCTL mark "cancel_lru_locks $1 stop"
2054 NR_CPU=$(grep -c "processor" /proc/cpuinfo)
2055 DEFAULT_LRU_SIZE=$((100 * NR_CPU))
2056 echo "$DEFAULT_LRU_SIZE"
2061 lctl set_param ldlm.namespaces.*$1*.lru_size=0
2064 lru_resize_disable()
2066 lctl set_param ldlm.namespaces.*$1*.lru_size $(default_lru_size)
2071 for FILE in `lctl get_param -N "llite.*.dump_page_cache"`; do
2072 if [ `lctl get_param -n $FILE | wc -l` -gt 1 ]; then
2073 echo there is still data in page cache $FILE ?
2074 lctl get_param -n $FILE
2082 DEBUGSAVE="$(lctl get_param -n debug)"
2086 [ -n "$DEBUGSAVE" ] && lctl set_param debug="${DEBUGSAVE}"
2090 ##################################
2092 ##################################
2095 local TYPE=${TYPE:-"FAIL"}
2097 lctl set_param fail_loc=0 2>/dev/null || true
2098 log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
2099 ERRLOG=$TMP/lustre_${TESTSUITE}_${TESTNAME}.$(date +%s)
2100 echo "Dumping lctl log to $ERRLOG"
2101 # We need to dump the logs on all nodes
2102 do_nodes $(comma_list $(nodes_list)) $NODE $LCTL dk $ERRLOG
2104 [ "$TESTSUITELOG" ] && echo "$0: ${TYPE}: $TESTNAME $@" >> $TESTSUITELOG
2110 $FAIL_ON_ERROR && exit 1 || true
2118 # use only if we are ignoring failures for this test, bugno required.
2119 # (like ALWAYS_EXCEPT, but run the test and ignore the results.)
2120 # e.g. error_ignore 5494 "your message"
2122 local TYPE="IGNORE (bz$1)"
2129 log " SKIP: ${TESTSUITE} ${TESTNAME} $@"
2130 [ "$TESTSUITELOG" ] && \
2131 echo "${TESTSUITE}: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
2134 build_test_filter() {
2135 [ "$ONLY" ] && log "only running test `echo $ONLY`"
2139 [ "$EXCEPT$ALWAYS_EXCEPT" ] && \
2140 log "excepting tests: `echo $EXCEPT $ALWAYS_EXCEPT`"
2141 [ "$EXCEPT_SLOW" ] && \
2142 log "skipping tests SLOW=no: `echo $EXCEPT_SLOW`"
2143 for E in $EXCEPT $ALWAYS_EXCEPT; do
2144 eval EXCEPT_${E}=true
2146 for E in $EXCEPT_SLOW; do
2147 eval EXCEPT_SLOW_${E}=true
2149 for G in $GRANT_CHECK_LIST; do
2150 eval GCHECK_ONLY_${G}=true
2159 IFS=abcdefghijklmnopqrstuvwxyz _basetest $1
2162 # print a newline if the last test was skipped
2163 export LAST_SKIPPED=
2167 export base=`basetest $1`
2168 if [ ! -z "$ONLY" ]; then
2170 if [ ${!testname}x != x ]; then
2171 [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
2176 if [ ${!testname}x != x ]; then
2177 [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
2186 if [ ${!testname}x != x ]; then
2188 TESTNAME=test_$1 skip "skipping excluded test $1"
2191 testname=EXCEPT_$base
2192 if [ ${!testname}x != x ]; then
2194 TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
2197 testname=EXCEPT_SLOW_$1
2198 if [ ${!testname}x != x ]; then
2200 TESTNAME=test_$1 skip "skipping SLOW test $1"
2203 testname=EXCEPT_SLOW_$base
2204 if [ ${!testname}x != x ]; then
2206 TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
2216 EQUALS="======================================================================"
2220 local suffixlen=$((${#EQUALS} - ${#msg}))
2221 [ $suffixlen -lt 5 ] && suffixlen=5
2222 log `echo $(printf '===== %s %.*s\n' "$msg" $suffixlen $EQUALS)`
2227 lsmod | grep lnet > /dev/null || load_modules
2239 do_nodes $(comma_list $(nodes_list)) $LCTL mark "$MSG" 2> /dev/null || true
2244 strace -o $TMP/$1.strace -ttt $*
2246 log "FINISHED: $*: rc $RC"
2251 $TEST_FAILED && echo -n "FAIL " || echo -n "PASS "
2256 FFREE=$(do_node $SINGLEMDS lctl get_param -n osd.*MDT*.filesfree | awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}')
2257 FTOTAL=$(do_node $SINGLEMDS lctl get_param -n osd.*MDT*.filestotal | awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}')
2258 [ $FFREE -ge $FTOTAL ] && error "files free $FFREE > total $FTOTAL" || true
2262 echo -n "Resetting fail_loc on all nodes..."
2263 do_nodes $(comma_list $(nodes_list)) "lctl set_param -n fail_loc=0 2>/dev/null || true"
2271 export tdir=d0.${TESTSUITE}/d${base}
2273 local SAVE_UMASK=`umask`
2276 local BEFORE=`date +%s`
2278 log "== test $testnum: $message == `date +%H:%M:%S` ($BEFORE)"
2280 export TESTNAME=test_$testnum
2282 test_${testnum} || error "test_$testnum failed with $?"
2286 check_grant ${testnum} || error "check_grant $testnum failed with $?"
2287 check_catastrophe || error "LBUG/LASSERT detected"
2288 ps auxww | grep -v grep | grep -q multiop && error "multiop still running"
2289 pass "($((`date +%s` - $BEFORE))s)"
2297 (cd `dirname $1`; echo $PWD/`basename $1`)
2301 [ -d $DIR1 ] && cd $DIR1 && sync; sleep 1; sync
2302 [ -d $DIR2 ] && cd $DIR2 && sync; sleep 1; sync
2307 export base=`basetest $1`
2308 [ "$CHECK_GRANT" == "no" ] && return 0
2310 testname=GCHECK_ONLY_${base}
2311 [ ${!testname}x == x ] && return 0
2313 echo -n "checking grant......"
2315 # write some data to sync client lost_grant
2316 rm -f $DIR1/${tfile}_check_grant_* 2>&1
2317 for i in `seq $OSTCOUNT`; do
2318 $LFS setstripe $DIR1/${tfile}_check_grant_$i -i $(($i -1)) -c 1
2319 dd if=/dev/zero of=$DIR1/${tfile}_check_grant_$i bs=4k \
2320 count=1 > /dev/null 2>&1
2322 # sync all the data and make sure no pending data on server
2325 #get client grant and server grant
2327 for d in `lctl get_param -n osc.*.cur_grant_bytes`; do
2328 client_grant=$((client_grant + $d))
2331 for d in `lctl get_param -n obdfilter.*.tot_granted`; do
2332 server_grant=$((server_grant + $d))
2335 # cleanup the check_grant file
2336 for i in `seq $OSTCOUNT`; do
2337 rm $DIR1/${tfile}_check_grant_$i
2340 #check whether client grant == server grant
2341 if [ $client_grant != $server_grant ]; then
2342 echo "failed: client:${client_grant} server: ${server_grant}"
2349 ########################
2355 ost=`echo $1 | awk -F_ '{print $3}'`
2356 if [ -z $ost ]; then
2357 ost=`echo $1 | sed 's/-osc.*//'`
2364 [ "$node" != "$(hostname)" ]
2370 for node in $(mdts_nodes); do
2371 remote_node $node && return 0
2378 [ "$CLIENTONLY" ] && return 0 || true
2379 remote_mds && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$mds_HOST" ]
2385 for node in $(osts_nodes) ; do
2386 remote_node $node && return 0
2393 [ "$CLIENTONLY" ] && return 0 || true
2394 remote_ost && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
2400 MGS=$(facet_host mgs)
2401 remote_node $MGS && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
2407 for num in `seq $MDSCOUNT`; do
2408 MDSNODES="$MDSNODES $(facet_host mds$num)"
2410 NODES_sort=$(for i in $MDSNODES; do echo $i; done | sort -u)
2416 remote_ost && remote_mds
2420 local OSTNODES=$(facet_host ost1)
2423 for num in `seq $OSTCOUNT`; do
2424 local myOST=$(facet_host ost$num)
2425 OSTNODES="$OSTNODES $myOST"
2427 NODES_sort=$(for i in $OSTNODES; do echo $i; done | sort -u)
2433 # FIXME. We need a list of clients
2434 local myNODES=$HOSTNAME
2437 # CLIENTS (if specified) contains the local client
2438 [ -n "$CLIENTS" ] && myNODES=${CLIENTS//,/ }
2440 if [ "$PDSH" -a "$PDSH" != "no_dsh" ]; then
2441 myNODES="$myNODES $(osts_nodes) $(mdts_nodes)"
2444 myNODES_sort=$(for i in $myNODES; do echo $i; done | sort -u)
2449 remote_nodes_list () {
2450 local rnodes=$(nodes_list)
2451 rnodes=$(echo " $rnodes " | sed -re "s/\s+$HOSTNAME\s+/ /g")
2455 init_clients_lists () {
2456 # Sanity check: exclude the local client from RCLIENTS
2457 local rclients=$(echo " $RCLIENTS " | sed -re "s/\s+$HOSTNAME\s+/ /g")
2459 # Sanity check: exclude the dup entries
2460 rclients=$(for i in $rclients; do echo $i; done | sort -u)
2462 local clients="$SINGLECLIENT $HOSTNAME $rclients"
2464 # Sanity check: exclude the dup entries from CLIENTS
2465 # for those configs which has SINGLCLIENT set to local client
2466 clients=$(for i in $clients; do echo $i; done | sort -u)
2468 CLIENTS=`comma_list $clients`
2469 local -a remoteclients=($rclients)
2470 for ((i=0; $i<${#remoteclients[@]}; i++)); do
2471 varname=CLIENT$((i + 2))
2472 eval $varname=${remoteclients[i]}
2475 CLIENTCOUNT=$((${#remoteclients[@]} + 1))
2478 get_random_entry () {
2481 rnodes=${rnodes//,/ }
2483 local -a nodes=($rnodes)
2484 local num=${#nodes[@]}
2485 local i=$((RANDOM * num * 2 / 65536))
2492 lctl get_param version | grep -q patchless
2496 [ "$MDSVER" = "$CLIVER" -a "$OSTVER" = "$CLIVER" ]
2501 echo $nodes | wc -w || true
2505 local nodes=$(osts_nodes)
2506 local osscount=$(get_node_count "$nodes")
2507 [ ! "$OSTCOUNT" = "$osscount" ]
2511 local nodes=$(mdts_nodes)
2512 local mdtcount=$(get_node_count "$nodes")
2513 [ ! "$MDSCOUNT" = "$mdtcount" ]
2516 generate_machine_file() {
2517 local nodes=${1//,/ }
2518 local machinefile=$2
2519 rm -f $machinefile || error "can't rm $machinefile"
2520 for node in $nodes; do
2521 echo $node >>$machinefile
2526 local file=$1/stripe
2528 $LFS getstripe -v $file || error
2532 check_runas_id_ret() {
2534 local myRUNAS_UID=$1
2535 local myRUNAS_GID=$2
2538 if [ -z "$myRUNAS" ]; then
2539 error_exit "myRUNAS command must be specified for check_runas_id"
2542 $myRUNAS krb5_login.sh || \
2543 error "Failed to refresh Kerberos V5 TGT for UID $myRUNAS_ID."
2545 mkdir $DIR/d0_runas_test
2547 chown $myRUNAS_UID:$myRUNAS_GID $DIR/d0_runas_test
2548 $myRUNAS touch $DIR/d0_runas_test/f$$ || myRC=$?
2549 rm -rf $DIR/d0_runas_test
2554 local myRUNAS_UID=$1
2555 local myRUNAS_GID=$2
2558 check_runas_id_ret $myRUNAS_UID $myRUNAS_GID $myRUNAS || \
2559 error "unable to write to $DIR/d0_runas_test as UID $myRUNAS_UID.
2560 Please set RUNAS_ID to some UID which exists on MDS and client or
2561 add user $myRUNAS_UID:$myRUNAS_GID on these nodes."
2564 # Run multiop in the background, but wait for it to print
2565 # "PAUSING" to its stdout before returning from this function.
2566 multiop_bg_pause() {
2567 MULTIOP_PROG=${MULTIOP_PROG:-multiop}
2571 TMPPIPE=/tmp/multiop_open_wait_pipe.$$
2574 echo "$MULTIOP_PROG $FILE v$ARGS"
2575 $MULTIOP_PROG $FILE v$ARGS > $TMPPIPE &
2577 echo "TMPPIPE=${TMPPIPE}"
2578 read -t 60 multiop_output < $TMPPIPE
2579 if [ $? -ne 0 ]; then
2584 if [ "$multiop_output" != "PAUSING" ]; then
2585 echo "Incorrect multiop output: $multiop_output"
2600 [ ${PIPESTATUS[0]} -eq 0 ] || rc=1
2606 inodes_available () {
2607 local IFree=$($LFS df -i $MOUNT | grep ^$FSNAME | awk '{print $4}' | sort -un | head -1) || return 1
2611 # reset llite stat counters
2612 clear_llite_stats(){
2613 lctl set_param -n llite.*.stats 0
2616 # sum llite stat items
2617 calc_llite_stats() {
2618 local res=$(lctl get_param -n llite.*.stats |
2619 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
2623 # reset osc stat counters
2625 lctl set_param -n osc.*.osc_stats 0
2628 # sum osc stat items
2630 local res=$(lctl get_param -n osc.*.osc_stats |
2631 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
2636 awk 'BEGIN {s = 0}; {s += $1}; END {print s}'
2639 calc_osc_kbytes () {
2640 df $MOUNT > /dev/null
2641 $LCTL get_param -n osc.*[oO][sS][cC][-_][0-9a-f]*.$1 | calc_sum
2644 # save_lustre_params(node, parameter_mask)
2645 # generate a stream of formatted strings (<node> <param name>=<param value>)
2646 save_lustre_params() {
2648 do_node $1 "lctl get_param $2" | while read s; do echo "$1 $s"; done
2651 # restore lustre parameters from input stream, produces by save_lustre_params
2652 restore_lustre_params() {
2656 while IFS=" =" read node name val; do
2657 do_node $node "lctl set_param -n $name $val"
2661 check_catastrophe() {
2662 local rnodes=${1:-$(comma_list $(remote_nodes_list))}
2663 local C=$CATASTROPHE
2664 [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
2666 if [ $rnodes ]; then
2667 do_nodes $rnodes "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
2668 if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
2684 do_facet $1 $3 lfs getstripe -v $2 > $tmp_file
2686 stripe_size=`awk '$1 ~ /size/ {print $2}' $tmp_file`
2687 stripe_count=`awk '$1 ~ /count/ {print $2}' $tmp_file`
2688 stripe_index=`awk '/obdidx/ {start = 1; getline; print $1; exit}' $tmp_file`
2692 # CMD: determine mds index where directory inode presents
2695 local file=$dir/f0.get_mds_dir_tmpfile
2699 local iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
2700 local -a oldused=($iused)
2704 iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
2705 local -a newused=($iused)
2708 for ((i=0; i<${#newused[@]}; i++)); do
2709 if [ ${oldused[$i]} -lt ${newused[$i]} ]; then
2715 error "mdt-s : inodes count OLD ${oldused[@]} NEW ${newused[@]}"
2719 local mpirun="$MPIRUN $MPIRUN_OPTIONS"
2720 local command="$mpirun $@"
2721 local mpilog=$TMP/mpi.log
2724 if [ "$MPI_USER" != root -a $mpirun ]; then
2725 echo "+ chmod 0777 $MOUNT"
2727 command="su $MPI_USER sh -c \"$command \""
2732 eval $command 2>&1 > $mpilog || true
2735 if [ $rc -eq 0 ] && grep -q "p4_error: : [^0]" $mpilog ; then
2742 mdsrate_cleanup () {
2743 mpi_run -np $1 -machinefile $2 ${MDSRATE} --unlink --nfiles $3 --dir $4 --filefmt $5 $6
2746 delayed_recovery_enabled () {
2747 local var=${SINGLEMDS}_svc
2748 do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
2751 ########################
2752 convert_facet2name() {
2754 "ost" ) echo "OST0000" ;;
2755 "ost1") echo "OST0000" ;;
2756 "ost2") echo "OST0001" ;;
2757 "ost3") echo "OST0002" ;;
2758 "ost4") echo "OST0003" ;;
2759 "ost5") echo "OST0004" ;;
2760 *) error "unknown facet!" ;;
2764 get_clientosc_proc_path() {
2770 get_lustre_version () {
2771 local node=${1:-"mds"}
2772 do_facet $node $LCTL get_param -n version | awk '/^lustre:/ {print $2}'
2775 get_mds_version_major () {
2776 local version=$(get_lustre_version mds)
2777 echo $version | awk -F. '{print $1}'
2780 get_mds_version_minor () {
2781 local version=$(get_lustre_version mds)
2782 echo $version | awk -F. '{print $2}'
2785 get_mdtosc_proc_path() {
2787 local major=$(get_mds_version_major)
2788 local minor=$(get_mds_version_minor)
2789 if [ $major -le 1 -a $minor -le 8 ] ; then
2792 echo "${ost}-osc-MDT0000"
2796 get_osc_import_name() {
2799 local name=$(convert_facet2name $ost)
2801 if [ "$node" == "mds" ]; then
2802 get_mdtosc_proc_path $name
2806 get_clientosc_proc_path $name
2810 wait_osc_import_state() {
2814 local ost=$(get_osc_import_name $node $ost_facet)
2819 CONN_PROC="osc.${FSNAME}-${ost}.ost_server_uuid"
2820 CONN_STATE=$(do_facet $node lctl get_param -n $CONN_PROC | cut -f2)
2821 while [ "${CONN_STATE}" != "${expected}" ]; do
2822 # for disconn we can check after proc entry is removed
2823 [ "x${CONN_STATE}" == "x" -a "${expected}" == "DISCONN" ] && return 0
2824 # disconnect rpc should be wait not more obd_timeout
2825 [ $i -ge $(($TIMEOUT * 3 / 2)) ] && \
2826 error "can't put import for ${ost}(${ost_facet}) into ${expected} state" && return 1
2828 CONN_STATE=$(do_facet $node lctl get_param -n $CONN_PROC | cut -f2)
2832 log "${ost_facet} now in ${CONN_STATE} state"