4 # In order to be able to do the runcon commands in test_4,
5 # the SELinux policy must allow transitions from unconfined_t
6 # to user_t and guest_t:
7 # #============= unconfined_r ==============
8 # allow unconfined_r guest_r;
9 # allow unconfined_r user_r;
11 # Run select tests by setting ONLY, or as arguments to the script.
12 # Skip specific tests by setting EXCEPT.
14 # e.g. ONLY="22 23" or ONLY="`seq 32 39`" or EXCEPT="31"
18 # bug number for skipped test:
19 ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"$SANITY_SELINUX_EXCEPT"}
20 # UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
25 LUSTRE=${LUSTRE:-$(dirname $0)/..}
26 . $LUSTRE/tests/test-framework.sh
28 . ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
31 require_dsh_mds || exit 0
33 [ "$SLOW" = "no" ] && EXCEPT_SLOW="xxx"
35 RUNAS_CMD=${RUNAS_CMD:-runas}
36 # $RUNAS_ID may get set incorrectly somewhere else
37 [ $UID -eq 0 -a $RUNAS_ID -eq 0 ] &&
38 error "RUNAS_ID set to 0, but UID is also 0!"
41 # global variables of this sanity
45 echo -n "Checking SELinux environment... "
46 local selinux_status=$(getenforce)
47 if [ "$selinux_status" != "Enforcing" ]; then
48 skip "SELinux is currently in $selinux_status mode," \
49 "but it must be enforced to run sanity-selinux" && exit 0
51 local selinux_policy=$(sestatus |
52 awk -F':' '$1 == "Loaded policy name" {print $2}' | xargs)
53 if [ -z "$selinux_policy" ]; then
54 selinux_policy=$(sestatus |
55 awk -F':' '$1 == "Policy from config file" {print $2}' | xargs)
57 [ "$selinux_policy" == "targeted" ] ||
58 error "Accepting only targeted policy"
59 echo "$selinux_status, $selinux_policy"
64 # we want double mount
65 MOUNT_2=${MOUNT_2:-"yes"}
66 check_and_setup_lustre
68 rm -rf $DIR/[df][0-9]*
70 check_runas_id $RUNAS_ID $RUNAS_ID $RUNAS
76 check_selinux_xattr() {
79 local mds_dev=$(facet_device $mds)
80 local mntpt="/tmp/mdt_"
83 do_facet $mds mkdir -p $mntpt || error "mkdir $mntpt failed"
84 mount_fstype $mds $mntpt || error "mount $mds failed"
86 local xattrval=$(do_facet $mds getfattr -n security.selinux \
87 ${mntpt}/ROOT/$mds_path |
88 awk -F"=" '$1=="security.selinux" {print $2}')
90 unmount_fstype $mds $mntpt || error "umount $mds failed"
91 do_facet $mds rmdir $mntpt || error "rmdir $mntpt failed"
98 local devname=$(mdsdevname 1)
99 local filename=${DIR}/${tdir}/df1
100 local mds_path=${filename#$MOUNT}
102 mds_path=${mds_path#/}
104 $LFS setdirstripe -i0 -c1 ${DIR}/$tdir || error "create dir $tdir failed"
105 touch $filename || error "cannot touch $filename"
107 local xattrval=$(check_selinux_xattr "mds1" $mds_path)
109 [ -n "$xattrval" -a "$xattrval" != '""' ] ||
110 error "security.selinux xattr is not set"
112 run_test 1 "create file and check security.selinux xattr is set on MDT"
115 local devname=$(mdsdevname 1)
116 local dirname=${DIR}/${tdir}/dir2a
117 local mds_path=${dirname#$MOUNT}
119 mds_path=${mds_path#/}
121 $LFS setdirstripe -i0 -c1 ${DIR}/$tdir || error "create dir failed"
122 mkdir $dirname || error "cannot mkdir $dirname"
124 local xattrval=$(check_selinux_xattr "mds1" $mds_path)
126 [ -n "$xattrval" -a "$xattrval" != '""' ] ||
127 error "security.selinux xattr is not set"
129 run_test 2a "create dir (mkdir) and check security.selinux xattr is set on MDT"
132 local devname=$(mdsdevname 1)
133 local dirname1=${DIR}/$tdir/dir2b1
134 local dirname2=${DIR}/$tdir/dir2b2
135 local mds_path=${dirname1#$MOUNT}
137 mds_path=${mds_path#/}
139 $LFS setdirstripe -i0 -c1 ${DIR}/$tdir || error "create dir failed"
140 $LFS mkdir -c0 -i0 $dirname1 || error "cannot 'lfs mkdir' $dirname1"
142 local xattrval=$(check_selinux_xattr "mds1" $mds_path)
144 mds_path=${dirname2#$MOUNT}
145 mds_path=${mds_path#/}
147 [ -n "$xattrval" -a "$xattrval" != '""' ] ||
148 error "security.selinux xattr is not set"
150 $LFS setdirstripe -i0 $dirname2 ||
151 error "cannot 'lfs setdirstripe' $dirname2"
153 xattrval=$(check_selinux_xattr "mds1" $mds_path)
155 [ -n "$xattrval" -a "$xattrval" != '""' ] ||
156 error "security.selinux xattr is not set"
158 run_test 2b "create dir with lfs and check security.selinux xattr is set on MDT"
161 local filename=$DIR/$tdir/df3
162 local level=$(id -Z | cut -d':' -f4-)
163 local unconctx="-u unconfined_u -r unconfined_r -t unconfined_t \
170 echo "As unconfined_u: touch $filename"
171 $RUNAS_CMD -u $RUNAS_ID runcon $unconctx touch $filename ||
172 error "can't touch $filename"
173 echo "As unconfined_u: rm -f $filename"
174 $RUNAS_CMD -u $RUNAS_ID runcon $unconctx rm -f $filename ||
175 error "can't remove $filename"
179 run_test 3 "access with unconfined user"
182 local filename=$DIR/$tdir/df4
183 local guestctx="-u guest_u -r guest_r -t guest_t -l s0"
184 local usrctx="-u user_u -r user_r -t user_t -l s0"
186 sesearch --role_allow | grep -q "allow unconfined_r user_r"
187 if [ $? -ne 0 ]; then
188 skip "SELinux policy module must allow transition from \
189 unconfined_r to user_r for this test." && exit 0
191 sesearch --role_allow | grep -q "allow unconfined_r guest_r"
192 if [ $? -ne 0 ]; then
193 skip "SELinux policy module must allow transition from \
194 unconfined_r to guest_r for this test." && exit 0
201 echo "As guest_u: touch $filename"
202 $RUNAS_CMD -u $RUNAS_ID runcon $guestctx touch $filename &&
203 error "touch $filename should have failed"
206 echo "As user_u: touch $filename"
207 $RUNAS_CMD -u $RUNAS_ID runcon $usrctx touch $filename ||
208 error "can't touch $filename"
209 echo "As user_u: rm -f $filename"
210 $RUNAS_CMD -u $RUNAS_ID runcon $usrctx rm -f $filename ||
211 error "can't remove $filename"
215 run_test 4 "access with specific SELinux user"
218 local filename=$DIR/df5
219 local newsecctx="nfs_t"
222 touch $filename || error "cannot touch $filename"
225 chcon -t $newsecctx $filename
228 # purge client's cache
229 sync ; echo 3 > /proc/sys/vm/drop_caches
233 local secctxseen=$(ls -lZ $filename | awk '{print $4}' | cut -d: -f3)
235 [ "$newsecctx" == "$secctxseen" ] ||
236 error "sec context seen from 1st mount point is not correct"
240 run_test 5 "security context retrieval from MDT xattr"
243 local filename1=$DIR/df10
244 local filename2=$DIR2/df10
245 local newsecctx="nfs_t"
247 # create file from 1st mount point
248 touch $filename1 || error "cannot touch $filename1"
251 # change sec context from 2nd mount point
252 chcon -t $newsecctx $filename2
255 # get sec context from 1st mount point
257 local secctxseen=$(ls -lZ $filename1 | awk '{print $4}' | cut -d: -f3)
259 [ "$newsecctx" == "$secctxseen" ] ||
260 error_ignore LU-6784 \
261 "sec context seen from 1st mount point is not correct"
265 run_test 10 "[consistency] concurrent security context change"
268 local filename1=$DIR/$tdir/df20a
269 local filename2=$DIR2/$tdir/df20a
271 local unconctx="-u unconfined_u -r unconfined_r -t unconfined_t -l s0"
276 # sleep some time in ll_create_nd()
277 #define OBD_FAIL_LLITE_CREATE_FILE_PAUSE 0x1409
278 do_facet client "$LCTL set_param fail_val=$req_delay fail_loc=0x1409"
280 # create file on first mount point
281 $RUNAS_CMD -u $RUNAS_ID runcon $unconctx touch $filename1 &
285 if [[ -z "$(ps h -o comm -p $touchpid)" ]]; then
286 error "touch failed to sleep, pid=$touchpid"
289 # get sec info on second mount point
290 if [ -e "$filename2" ]; then
291 secinfo2=$(ls -lZ $filename2 | awk '{print $4}')
294 # get sec info on first mount point
296 secinfo1=$(ls -lZ $filename1 | awk '{print $4}')
298 # compare sec contexts
299 [ -z "$secinfo2" -o "$secinfo1" == "$secinfo2" ] ||
300 error "sec context seen from 2nd mount point is not correct"
304 run_test 20a "[atomicity] concurrent access from another client (file)"
307 local dirname1=$DIR/$tdir/dd20b
308 local dirname2=$DIR2/$tdir/dd20b
310 local unconctx="-u unconfined_u -r unconfined_r -t unconfined_t -l s0"
315 # sleep some time in ll_create_nd()
316 #define OBD_FAIL_LLITE_NEWNODE_PAUSE 0x140a
317 do_facet client "$LCTL set_param fail_val=$req_delay fail_loc=0x140a"
319 # create file on first mount point
320 $RUNAS_CMD -u $RUNAS_ID runcon $unconctx mkdir $dirname1 &
324 if [[ -z "$(ps h -o comm -p $mkdirpid)" ]]; then
325 error "mkdir failed to sleep, pid=$mkdirpid"
328 # get sec info on second mount point
329 if [ -e "$dirname2" ]; then
330 secinfo2=$(ls -ldZ $dirname2 | awk '{print $4}')
335 # get sec info on first mount point
337 secinfo1=$(ls -ldZ $dirname1 | awk '{print $4}')
339 # compare sec contexts
340 [ -z "$secinfo2" -o "$secinfo1" == "$secinfo2" ] ||
341 error "sec context seen from 2nd mount point is not correct"
345 run_test 20b "[atomicity] concurrent access from another client (dir)"
348 local dirname1=$DIR/dd20c
349 local dirname2=$DIR2/dd20c
352 # sleep some time in ll_create_nd()
353 #define OBD_FAIL_LLITE_SETDIRSTRIPE_PAUSE 0x140b
354 do_facet client "$LCTL set_param fail_val=$req_delay fail_loc=0x140b"
356 # create file on first mount point
357 $LFS mkdir -c0 -i0 $dirname1 &
361 if [[ -z "$(ps h -o comm -p $mkdirpid)" ]]; then
362 error "lfs mkdir failed to sleep, pid=$mkdirpid"
365 # get sec info on second mount point
366 if [ -e "$dirname2" ]; then
367 secinfo2=$(ls -ldZ $dirname2 | awk '{print $4}')
372 # get sec info on first mount point
374 secinfo1=$(ls -ldZ $dirname1 | awk '{print $4}')
376 # compare sec contexts
377 [ -z "$secinfo2" -o "$secinfo1" == "$secinfo2" ] ||
378 error "sec context seen from 2nd mount point is not correct"
382 run_test 20c "[atomicity] concurrent access from another client (dir via lfs)"
385 umount_client $MOUNT || error "umount $MOUNT failed"
391 local xattr_prefix=$(grep -E \
392 "#define[[:space:]]+XATTR_SECURITY_PREFIX[[:space:]]+" \
393 /usr/include/linux/xattr.h 2>/dev/null |
394 awk '{print $3}' | sed s+\"++g)
395 local xattr_suffix=$(grep -E \
396 "#define[[:space:]]+XATTR_SELINUX_SUFFIX[[:space:]]+" \
397 /usr/include/linux/xattr.h 2>/dev/null |
398 awk '{print $3}' | sed s+\"++g)
399 local xattr_name=${xattr_prefix}${xattr_suffix}
401 [ -z "$xattr_name" ] && xattr_name="security.selinux"
404 if [ "$MOUNT_2" ] && $(grep -q $MOUNT2' ' /proc/mounts); then
405 umount_client $MOUNT2 || error "umount $MOUNT2 failed"
407 if $(grep -q $MOUNT' ' /proc/mounts); then
408 umount_client $MOUNT || error "umount $MOUNT failed"
412 mount_client $MOUNT ${MOUNT_OPTS} || error "mount client failed"
414 $LCTL set_param debug=+info
420 $LCTL dk | grep "get xattr '${xattr_name}'"
421 [ $? -eq 0 ] && error "get xattr event was triggered" || true
425 if [ "$MDS1_VERSION" -lt $(version_code 2.12.50) ] ||
426 [ "$CLIENT_VERSION" -lt $(version_code 2.12.50) ]; then
427 skip "Need version >= 2.12.50"
429 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
431 stack_trap cleanup_20d EXIT
433 local dirname=$DIR/$tdir/subdir
438 trace_cmd stat $dirname
439 trace_cmd touch $dirname/f1
440 trace_cmd stat $dirname/f1
441 trace_cmd cat $dirname/f1
442 dd if=/dev/zero of=$dirname/f1 bs=1M count=10
443 trace_cmd /usr/bin/truncate -s 10240 $dirname/f1
444 trace_cmd lfs setstripe -E -1 -S 4M $dirname/f2
445 trace_cmd lfs migrate -E -1 -S 256K $dirname/f2
446 trace_cmd lfs setdirstripe -i 1 $dirname/d2
447 trace_cmd lfs migrate -m 0 $dirname/d2
449 lfs setdirstripe -i 1 -c 1 $dirname/d3
450 dirname=$dirname/d3/subdir
453 trace_cmd stat $dirname
454 trace_cmd touch $dirname/f1
455 trace_cmd stat $dirname/f1
456 trace_cmd cat $dirname/f1
457 dd if=/dev/zero of=$dirname/f1 bs=1M count=10
458 trace_cmd /usr/bin/truncate -s 10240 $dirname/f1
459 trace_cmd lfs setstripe -E -1 -S 4M $dirname/f2
460 trace_cmd lfs migrate -E -1 -S 256K $dirname/f2
462 run_test 20d "[atomicity] avoid getxattr for security context"
470 if [ "$nm" == "active" ]; then
473 proc_param="$nm.$key"
476 for i in $(seq 1 20); do
477 out=$(do_facet mds1 $LCTL get_param -n \
478 nodemap.$proc_param 2>/dev/null)
479 echo "On mds1, ${proc_param} = $out"
480 [ "$val" == "$out" ] && is_sync=true && break
484 error "$proc_param not updated on mds1 after 20 secs"
491 local client_ip=$(host_nids_address $HOSTNAME $NETTYPE)
492 local client_nid=$(h2nettype $client_ip)
494 do_facet mgs $LCTL nodemap_activate 1
496 do_facet mgs $LCTL nodemap_add $nm
497 do_facet mgs $LCTL nodemap_add_range \
498 --name $nm --range $client_nid
499 do_facet mgs $LCTL nodemap_modify --name $nm \
500 --property admin --value 1
501 do_facet mgs $LCTL nodemap_modify --name $nm \
502 --property trusted --value 1
504 check_nodemap $nm admin_nodemap 1
505 check_nodemap $nm trusted_nodemap 1
507 sepol=$(l_getsepol | cut -d':' -f2- | xargs)
508 do_facet mgs $LCTL set_param nodemap.$nm.sepol="$sepol"
509 do_facet mgs $LCTL set_param -P nodemap.$nm.sepol="$sepol"
511 check_nodemap $nm sepol $sepol
517 do_facet mgs $LCTL nodemap_del $nm
519 do_facet mgs $LCTL nodemap_activate 0
521 check_nodemap active x 0
525 [ "$MDS1_VERSION" -lt $(version_code 2.11.56) ] &&
526 skip "Need MDS >= 2.11.56"
531 if [ "$MOUNT_2" ] && $(grep -q $MOUNT2' ' /proc/mounts); then
532 umount_client $MOUNT2 || error "umount $MOUNT2 failed"
534 if $(grep -q $MOUNT' ' /proc/mounts); then
535 umount_client $MOUNT || error "umount $MOUNT failed"
538 # create nodemap entry with sepol
542 # update mount option with skpath
543 MOUNT_OPTS=$(add_sk_mntflag $MOUNT_OPTS)
544 export SK_UNIQUE_NM=true
546 # load specific key on servers
547 do_nodes $(comma_list $(all_server_nodes)) "lgss_sk -t server \
548 -l $SK_PATH/nodemap/c0.key"
550 # set perms for per-nodemap keys else permission denied
551 do_nodes $(comma_list $(all_server_nodes)) \
552 "keyctl show | grep lustre | cut -c1-11 |
554 xargs -IX keyctl setperm X 0x3f3f3f3f"
558 # mount client without sending sepol
559 mount_client $MOUNT $MOUNT_OPTS &&
560 error "client mount without sending sepol should be refused"
562 # mount client with sepol
563 echo -1 > /sys/module/ptlrpc/parameters/send_sepol
564 mount_client $MOUNT $MOUNT_OPTS ||
565 error "client mount with sepol failed"
568 umount_client $MOUNT || error "umount $MOUNT failed"
570 # store wrong sepol in nodemap
571 sepol="0:policy:0:0000000000000000000000000000000000000000000000000000000000000000"
572 do_facet mgs $LCTL set_param nodemap.c0.sepol="$sepol"
573 do_facet mgs $LCTL set_param -P nodemap.c0.sepol="$sepol"
574 check_nodemap c0 sepol $sepol
576 # mount client with sepol
577 mount_client $MOUNT $MOUNT_OPTS &&
578 error "client mount without matching sepol should be refused"
584 export SK_UNIQUE_NM=false
587 # remount client normally
588 echo 0 > /sys/module/ptlrpc/parameters/send_sepol
589 mountcli || error "normal client mount failed"
591 run_test 21a "Send sepol at connect"
594 [ "$MDS1_VERSION" -lt $(version_code 2.11.56) ] &&
595 skip "Need MDS >= 2.11.56"
599 mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
600 echo test > $DIR/$tdir/toopen ||
601 error "failed to write to $DIR/$tdir/toopen"
602 touch $DIR/$tdir/ftoremove ||
603 error "failed to create $DIR/$tdir/ftoremove"
604 touch $DIR/$tdir/ftoremove2 ||
605 error "failed to create $DIR/$tdir/ftoremove2"
606 touch $DIR/$tdir/ftoremove3 ||
607 error "failed to create $DIR/$tdir/ftoremove3"
608 touch $DIR/$tdir/ftoremove4 ||
609 error "failed to create $DIR/$tdir/ftoremove4"
610 mkdir $DIR/$tdir/dtoremove ||
611 error "failed to create $DIR/$tdir/dtoremove"
612 mkdir $DIR/$tdir/dtoremove2 ||
613 error "failed to create $DIR/$tdir/dtoremove2"
614 mkdir $DIR/$tdir/dtoremove3 ||
615 error "failed to create $DIR/$tdir/dtoremove3"
616 mkdir $DIR/$tdir/dtoremove4 ||
617 error "failed to create $DIR/$tdir/dtoremove4"
618 touch $DIR/$tdir/ftorename ||
619 error "failed to create $DIR/$tdir/ftorename"
620 mkdir $DIR/$tdir/dtorename ||
621 error "failed to create $DIR/$tdir/dtorename"
622 setfattr -n user.myattr -v myval $DIR/$tdir/toopen ||
623 error "failed to set xattr on $DIR/$tdir/toopen"
624 echo 3 > /proc/sys/vm/drop_caches
626 # create nodemap entry with sepol
630 export SK_UNIQUE_NM=true
632 # load specific key on servers
633 do_nodes $(comma_list $(all_server_nodes)) "lgss_sk -t server \
634 -l $SK_PATH/nodemap/c0.key"
636 # set perms for per-nodemap keys else permission denied
637 do_nodes $(comma_list $(all_server_nodes)) \
638 "keyctl show | grep lustre | cut -c1-11 |
640 xargs -IX keyctl setperm X 0x3f3f3f3f"
644 # metadata ops without sending sepol
645 touch $DIR/$tdir/f0 && error "touch (1)"
646 lfs setstripe -c1 $DIR/$tdir/f1 && error "lfs setstripe (1)"
647 mkdir $DIR/$tdir/d0 && error "mkdir (1)"
648 lfs setdirstripe -i0 -c1 $DIR/$tdir/d1 && error "lfs setdirstripe (1)"
649 cat $DIR/$tdir/toopen && error "cat (1)"
650 rm -f $DIR/$tdir/ftoremove && error "rm (1)"
651 rmdir $DIR/$tdir/dtoremove && error "rmdir (1)"
652 mv $DIR/$tdir/ftorename $DIR/$tdir/ftorename2 && error "mv (1)"
653 mv $DIR/$tdir/dtorename $DIR/$tdir/dtorename2 && error "mv (2)"
654 getfattr -n user.myattr $DIR/$tdir/toopen && error "getfattr (1)"
655 setfattr -n user.myattr -v myval2 $DIR/$tdir/toopen &&
657 chattr +i $DIR/$tdir/toopen && error "chattr (1)"
658 lsattr $DIR/$tdir/toopen && error "lsattr (1)"
659 chattr -i $DIR/$tdir/toopen && error "chattr (1)"
660 ln -s $DIR/$tdir/toopen $DIR/$tdir/toopen_sl1 && error "symlink (1)"
661 ln $DIR/$tdir/toopen $DIR/$tdir/toopen_hl1 && error "hardlink (1)"
663 # metadata ops with sepol
664 echo -1 > /sys/module/ptlrpc/parameters/send_sepol
665 touch $DIR/$tdir/f2 || error "touch (2)"
666 lfs setstripe -c1 $DIR/$tdir/f3 || error "lfs setstripe (2)"
667 mkdir $DIR/$tdir/d2 || error "mkdir (2)"
668 lfs setdirstripe -i0 -c1 $DIR/$tdir/d3 || error "lfs setdirstripe (2)"
669 cat $DIR/$tdir/toopen || error "cat (2)"
670 rm -f $DIR/$tdir/ftoremove || error "rm (2)"
671 rmdir $DIR/$tdir/dtoremove || error "rmdir (2)"
672 mv $DIR/$tdir/ftorename $DIR/$tdir/ftorename2 || error "mv (3)"
673 mv $DIR/$tdir/dtorename $DIR/$tdir/dtorename2 || error "mv (4)"
674 getfattr -n user.myattr $DIR/$tdir/toopen || error "getfattr (2)"
675 setfattr -n user.myattr -v myval2 $DIR/$tdir/toopen ||
677 chattr +i $DIR/$tdir/toopen || error "chattr (2)"
678 lsattr $DIR/$tdir/toopen || error "lsattr (2)"
679 chattr -i $DIR/$tdir/toopen || error "chattr (2)"
680 ln -s $DIR/$tdir/toopen $DIR/$tdir/toopen_sl2 || error "symlink (2)"
681 ln $DIR/$tdir/toopen $DIR/$tdir/toopen_hl2 || error "hardlink (2)"
682 echo 3 > /proc/sys/vm/drop_caches
684 # store wrong sepol in nodemap
685 sepol="0:policy:0:0000000000000000000000000000000000000000000000000000000000000000"
686 do_facet mgs $LCTL set_param nodemap.c0.sepol="$sepol"
687 do_facet mgs $LCTL set_param -P nodemap.c0.sepol="$sepol"
688 check_nodemap c0 sepol $sepol
690 # metadata ops with sepol
691 touch $DIR/$tdir/f4 && error "touch (3)"
692 lfs setstripe -c1 $DIR/$tdir/f5 && error "lfs setstripe (3)"
693 mkdir $DIR/$tdir/d4 && error "mkdir (3)"
694 lfs setdirstripe -i0 -c1 $DIR/$tdir/d5 && error "lfs setdirstripe (3)"
695 cat $DIR/$tdir/toopen && error "cat (3)"
696 rm -f $DIR/$tdir/ftoremove2 && error "rm (3)"
697 rmdir $DIR/$tdir/dtoremove2 && error "rmdir (3)"
698 mv $DIR/$tdir/ftorename2 $DIR/$tdir/ftorename && error "mv (5)"
699 mv $DIR/$tdir/dtorename2 $DIR/$tdir/dtorename && error "mv (6)"
700 getfattr -n user.myattr $DIR/$tdir/toopen && error "getfattr (3)"
701 setfattr -n user.myattr -v myval3 $DIR/$tdir/toopen &&
703 chattr +i $DIR/$tdir/toopen && error "chattr (3)"
704 lsattr $DIR/$tdir/toopen && error "lsattr (3)"
705 chattr -i $DIR/$tdir/toopen && error "chattr (3)"
706 ln -s $DIR/$tdir/toopen $DIR/$tdir/toopen_sl3 && error "symlink (3)"
707 ln $DIR/$tdir/toopen $DIR/$tdir/toopen_hl3 && error "hardlink (3)"
709 # reset correct sepol
710 sepol=$(l_getsepol | cut -d':' -f2- | xargs)
711 do_facet mgs $LCTL set_param nodemap.c0.sepol="$sepol"
712 do_facet mgs $LCTL set_param -P nodemap.c0.sepol="$sepol"
713 check_nodemap c0 sepol $sepol
715 # metadata ops with sepol every 10 seconds only
716 echo 10 > /sys/module/ptlrpc/parameters/send_sepol
717 touch $DIR/$tdir/f6 || error "touch (4)"
718 lfs setstripe -c1 $DIR/$tdir/f7 || error "lfs setstripe (4)"
719 mkdir $DIR/$tdir/d6 || error "mkdir (4)"
720 lfs setdirstripe -i0 -c1 $DIR/$tdir/d7 || error "lfs setdirstripe (4)"
721 cat $DIR/$tdir/toopen || error "cat (4)"
722 rm -f $DIR/$tdir/ftoremove2 || error "rm (4)"
723 rmdir $DIR/$tdir/dtoremove2 || error "rmdir (4)"
724 mv $DIR/$tdir/ftorename2 $DIR/$tdir/ftorename || error "mv (7)"
725 mv $DIR/$tdir/dtorename2 $DIR/$tdir/dtorename || error "mv (8)"
726 getfattr -n user.myattr $DIR/$tdir/toopen || error "getfattr (4)"
727 setfattr -n user.myattr -v myval3 $DIR/$tdir/toopen ||
729 chattr +i $DIR/$tdir/toopen || error "chattr (4)"
730 lsattr $DIR/$tdir/toopen || error "lsattr (4)"
731 chattr -i $DIR/$tdir/toopen || error "chattr (4)"
732 ln -s $DIR/$tdir/toopen $DIR/$tdir/toopen_sl4 || error "symlink (4)"
733 ln $DIR/$tdir/toopen $DIR/$tdir/toopen_hl4 || error "hardlink (4)"
734 echo 3 > /proc/sys/vm/drop_caches
736 # change one SELinux boolean value
737 sebool=$(getsebool deny_ptrace | awk '{print $3}')
738 if [ "$sebool" == "off" ]; then
739 setsebool -P deny_ptrace on
741 setsebool -P deny_ptrace off
744 # sepol should not be checked yet, so metadata ops without matching
745 # sepol should succeed
746 touch $DIR/$tdir/f8 || error "touch (5)"
747 lfs setstripe -c1 $DIR/$tdir/f9 || error "lfs setstripe (5)"
748 mkdir $DIR/$tdir/d8 || error "mkdir (5)"
749 lfs setdirstripe -i0 -c1 $DIR/$tdir/d9 || error "lfs setdirstripe (5)"
750 cat $DIR/$tdir/toopen || error "cat (5)"
751 rm -f $DIR/$tdir/ftoremove3 || error "rm (5)"
752 rmdir $DIR/$tdir/dtoremove3 || error "rmdir (5)"
753 mv $DIR/$tdir/ftorename $DIR/$tdir/ftorename2 || error "mv (9)"
754 mv $DIR/$tdir/dtorename $DIR/$tdir/dtorename2 || error "mv (10)"
755 getfattr -n user.myattr $DIR/$tdir/toopen || error "getfattr (5)"
756 setfattr -n user.myattr -v myval4 $DIR/$tdir/toopen ||
758 chattr +i $DIR/$tdir/toopen || error "chattr (5)"
759 lsattr $DIR/$tdir/toopen || error "lsattr (5)"
760 chattr -i $DIR/$tdir/toopen || error "chattr (5)"
761 ln -s $DIR/$tdir/toopen $DIR/$tdir/toopen_sl5 || error "symlink (5)"
762 ln $DIR/$tdir/toopen $DIR/$tdir/toopen_hl5 || error "hardlink (5)"
763 echo 3 > /proc/sys/vm/drop_caches
766 # metadata ops without matching sepol: should fail now
767 touch $DIR/$tdir/f10 && error "touch (6)"
768 lfs setstripe -c1 $DIR/$tdir/f11 && error "lfs setstripe (6)"
769 mkdir $DIR/$tdir/d10 && error "mkdir (6)"
770 lfs setdirstripe -i0 -c1 $DIR/$tdir/d11 && error "lfs setdirstripe (6)"
771 cat $DIR/$tdir/toopen && error "cat (6)"
772 rm -f $DIR/$tdir/ftoremove4 && error "rm (6)"
773 rmdir $DIR/$tdir/dtoremove4 && error "rmdir (6)"
774 mv $DIR/$tdir/ftorename2 $DIR/$tdir/ftorename && error "mv (11)"
775 mv $DIR/$tdir/dtorename2 $DIR/$tdir/dtorename && error "mv (12)"
776 getfattr -n user.myattr $DIR/$tdir/toopen && error "getfattr (6)"
777 setfattr -n user.myattr -v myval5 $DIR/$tdir/toopen &&
779 chattr +i $DIR/$tdir/toopen && error "chattr (6)"
780 lsattr $DIR/$tdir/toopen && error "lsattr (6)"
781 chattr -i $DIR/$tdir/toopen && error "chattr (6)"
782 ln -s $DIR/$tdir/toopen $DIR/$tdir/toopen_sl6 && error "symlink (6)"
783 ln $DIR/$tdir/toopen $DIR/$tdir/toopen_hl6 && error "hardlink (6)"
785 # restore SELinux boolean value
786 if [ "$sebool" == "off" ]; then
787 setsebool -P deny_ptrace off
789 setsebool -P deny_ptrace on
794 echo 0 > /sys/module/ptlrpc/parameters/send_sepol
797 export SK_UNIQUE_NM=false
800 run_test 21b "Send sepol for metadata ops"
803 check_and_cleanup_lustre