3 # add uml1 uml2 uml3 in your /etc/hosts
5 # FIXME - there is no reason to use all of these different
6 # return codes, espcially when most of them are mapped to something
7 # else anyway. The combination of test number and return code
8 # figure out what failed.
14 # bug number for skipped test: 13739
15 HEAD_EXCEPT=" 32a 32b"
17 # bug number for skipped test:
18 ALWAYS_EXCEPT=" $CONF_SANITY_EXCEPT $HEAD_EXCEPT"
19 # UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
22 PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
24 PTLDEBUG=${PTLDEBUG:--1}
26 LUSTRE=${LUSTRE:-`dirname $0`/..}
27 RLUSTRE=${RLUSTRE:-$LUSTRE}
29 . $LUSTRE/tests/test-framework.sh
31 # STORED_MDSSIZE is used in test_18
32 if [ -n "$MDSSIZE" ]; then
33 STORED_MDSSIZE=$MDSSIZE
35 # use small MDS + OST size to speed formatting time
38 . ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
40 remote_mds_nodsh && skip "remote MDS with nodsh" && exit 0
41 remote_ost_nodsh && skip "remote OST with nodsh" && exit 0
44 [ "$SLOW" = "no" ] && EXCEPT_SLOW="0 1 2 3 6 7 15 18 24b 25 30 31 32 33 34a 45"
53 local facet=$SINGLEMDS
54 local dev=${facet}_dev
58 # who knows if/where $TUNEFS is installed? Better reformat if it fails...
59 do_facet ${facet} "$TUNEFS --writeconf ${!dev}" || echo "tunefs failed, reformatting instead" && reformat
64 # The MGS must be started before the OSTs for a new fs, so start
65 # and stop to generate the startup logs.
74 local facet=$SINGLEMDS
75 # we can not use MDSDEV1 here because SINGLEMDS could be set not to mds1 only
76 local num=$(echo $facet | tr -d "mds")
77 local dev=$(mdsdevname $num)
78 echo "start mds service on `facet_active_host $facet`"
79 start $facet ${dev} $MDS_MOUNT_OPTS || return 94
83 echo "stop mds service on `facet_active_host $SINGLEMDS`"
84 # These tests all use non-failover stop
85 stop $SINGLEMDS -f || return 97
89 echo "start ost1 service on `facet_active_host ost1`"
90 start ost1 `ostdevname 1` $OST_MOUNT_OPTS || return 95
94 echo "stop ost1 service on `facet_active_host ost1`"
95 # These tests all use non-failover stop
96 stop ost1 -f || return 98
100 echo "start ost2 service on `facet_active_host ost2`"
101 start ost2 `ostdevname 2` $OST_MOUNT_OPTS || return 92
105 echo "stop ost2 service on `facet_active_host ost2`"
106 # These tests all use non-failover stop
107 stop ost2 -f || return 93
112 echo "mount $FSNAME on ${MOUNTPATH}....."
113 zconf_mount `hostname` $MOUNTPATH || return 96
117 local SAVEMOUNTOPT=$MOUNTOPT
118 MOUNTOPT="remount,$1"
120 echo "remount '$1' lustre on ${MOUNTPATH}....."
121 zconf_mount `hostname` $MOUNTPATH || return 96
122 MOUNTOPT=$SAVEMOUNTOPT
127 echo "umount lustre on ${MOUNTPATH}....."
128 zconf_umount `hostname` $MOUNTPATH || return 97
131 manual_umount_client(){
134 echo "manual umount lustre on ${MOUNT}...."
135 do_facet client "umount -d ${FORCE} $MOUNT"
147 stop_mds || return 201
148 stop_ost || return 202
149 unload_modules || return 203
153 umount_client $MOUNT || return 200
154 cleanup_nocli || return $?
158 do_facet client "cp /etc/passwd $DIR/a" || return 71
159 do_facet client "rm $DIR/a" || return 72
160 # make sure lustre is actually mounted (touch will block,
161 # but grep won't, so do it after)
162 do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
163 echo "setup single mount lustre success"
167 do_facet client "touch $DIR/a" || return 71
168 do_facet client "rm $DIR/a" || return 72
169 do_facet client "touch $DIR2/a" || return 73
170 do_facet client "rm $DIR2/a" || return 74
171 echo "setup double mount lustre success"
176 if [ "$ONLY" == "setup" ]; then
181 if [ "$ONLY" == "cleanup" ]; then
188 #create single point mountpoint
194 check_mount || return 41
197 run_test 0 "single mount setup"
201 echo "start ost second time..."
203 check_mount || return 42
206 run_test 1 "start up ost twice (should return errors)"
211 echo "start mds second time.."
214 check_mount || return 43
217 run_test 2 "start up mds twice (should return err)"
221 #mount.lustre returns an error if already in mtab
222 mount_client $MOUNT && return $?
223 check_mount || return 44
226 run_test 3 "mount client twice (should return err)"
230 touch $DIR/$tfile || return 85
234 # ok for ost to fail shutdown
235 if [ 202 -ne $eno ]; then
240 run_test 4 "force cleanup ost, then cleanup"
242 test_5a() { # was test_5
244 touch $DIR/$tfile || return 1
245 fuser -m -v $MOUNT && echo "$MOUNT is in use by user space process."
247 stop_mds -f || return 2
249 # cleanup may return an error from the failed
250 # disconnects; for now I'll consider this successful
251 # if all the modules have unloaded.
255 echo "killing umount"
256 kill -TERM $UMOUNT_PID
257 echo "waiting for umount to finish"
259 if grep " $MOUNT " /proc/mounts; then
260 echo "test 5: /proc/mounts after failed umount"
264 echo "killing umount"
265 kill -TERM $UMOUNT_PID
266 echo "waiting for umount to finish"
268 grep " $MOUNT " /proc/mounts && echo "test 5: /proc/mounts after second umount" && return 11
272 # stop_mds is a no-op here, and should not fail
273 cleanup_nocli || return $?
274 # df may have lingering entry
276 # mtab may have lingering entry
280 while [ "$WAIT" -ne "$MAX_WAIT" ]; do
282 grep -q $MOUNT" " /etc/mtab || break
283 echo "Waiting /etc/mtab updated ... "
284 WAIT=$(( WAIT + sleep))
286 [ "$WAIT" -eq "$MAX_WAIT" ] && error "/etc/mtab is not updated in $WAIT secs"
287 echo "/etc/mtab updated in $WAIT secs"
289 run_test 5a "force cleanup mds, then cleanup"
293 [ -d $MOUNT ] || mkdir -p $MOUNT
294 grep " $MOUNT " /etc/mtab && echo "test 5b: mtab before mount" && return 10
295 mount_client $MOUNT && return 1
296 grep " $MOUNT " /etc/mtab && echo "test 5b: mtab after failed mount" && return 11
298 # stop_mds is a no-op here, and should not fail
299 cleanup_nocli || return $?
302 run_test 5b "mds down, cleanup after failed mount (bug 2712) (should return errs)"
307 [ -d $MOUNT ] || mkdir -p $MOUNT
308 grep " $MOUNT " /etc/mtab && echo "test 5c: mtab before mount" && return 10
309 local oldfs="${FSNAME}"
310 FSNAME="wrong.${FSNAME}"
311 mount_client $MOUNT || :
313 grep " $MOUNT " /etc/mtab && echo "test 5c: mtab after failed mount" && return 11
315 cleanup_nocli || return $?
317 run_test 5c "cleanup after failed mount (bug 2712) (should return errs)"
323 grep " $MOUNT " /etc/mtab && echo "test 5d: mtab before mount" && return 10
324 mount_client $MOUNT || return 1
326 grep " $MOUNT " /etc/mtab && echo "test 5d: mtab after unmount" && return 11
329 run_test 5d "mount with ost down"
335 #define OBD_FAIL_PTLRPC_DELAY_SEND 0x506
336 do_facet client "lctl set_param fail_loc=0x80000506"
337 grep " $MOUNT " /etc/mtab && echo "test 5e: mtab before mount" && return 10
338 mount_client $MOUNT || echo "mount failed (not fatal)"
340 grep " $MOUNT " /etc/mtab && echo "test 5e: mtab after unmount" && return 11
343 run_test 5e "delayed connect, don't crash (bug 10268)"
348 mount_client ${MOUNT} || return 87
349 touch $DIR/a || return 86
352 run_test 6 "manual umount, then mount again"
357 cleanup_nocli || return $?
359 run_test 7 "manual umount, then cleanup"
364 check_mount2 || return 45
365 umount_client $MOUNT2
368 run_test 8 "double mount setup"
373 do_facet ost1 lctl set_param debug=\'inode trace\' || return 1
374 do_facet ost1 lctl set_param subsystem_debug=\'mds ost\' || return 1
376 CHECK_PTLDEBUG="`do_facet ost1 lctl get_param -n debug`"
377 if [ "$CHECK_PTLDEBUG" ] && { \
378 [ "$CHECK_PTLDEBUG" = "trace inode warning error emerg console" ] ||
379 [ "$CHECK_PTLDEBUG" = "trace inode" ]; }; then
380 echo "lnet.debug success"
382 echo "lnet.debug: want 'trace inode', have '$CHECK_PTLDEBUG'"
385 CHECK_SUBSYS="`do_facet ost1 lctl get_param -n subsystem_debug`"
386 if [ "$CHECK_SUBSYS" ] && [ "$CHECK_SUBSYS" = "mds ost" ]; then
387 echo "lnet.subsystem_debug success"
389 echo "lnet.subsystem_debug: want 'mds ost', have '$CHECK_SUBSYS'"
392 stop_ost || return $?
395 run_test 9 "test ptldebug and subsystem for mkfs"
397 # LOGS/PENDING do not exist anymore since CMD3
399 local TMPMTPT="${TMP}/conf16"
400 local dev=${SINGLEMDS}_dev
402 if [ ! -e "$MDSDEV" ]; then
403 log "no $MDSDEV existing, so mount Lustre to create one"
405 check_mount || return 41
409 [ -f "$MDSDEV" ] && LOOPOPT="-o loop"
411 log "change the mode of $MDSDEV/OBJECTS to 555"
412 do_facet $SINGLEMDS "mkdir -p $TMPMTPT &&
413 mount $LOOPOPT -t $FSTYPE $MDSDEV $TMPMTPT &&
414 chmod 555 $TMPMTPT/OBJECTS &&
415 umount $TMPMTPT" || return $?
417 log "mount Lustre to change the mode of OBJECTS, then umount Lustre"
419 check_mount || return 41
422 log "read the mode of OBJECTS and check if they has been changed properly"
423 EXPECTEDOBJECTSMODE=`do_facet $SINGLEMDS "debugfs -R 'stat OBJECTS' $MDSDEV 2> /dev/null" | grep 'Mode: ' | sed -e "s/.*Mode: *//" -e "s/ *Flags:.*//"`
425 if [ "$EXPECTEDOBJECTSMODE" = "0777" ]; then
426 log "Success:Lustre change the mode of OBJECTS correctly"
428 error "Lustre does not change mode of OBJECTS properly"
431 run_test 16 "verify that lustre will correct the mode of OBJECTS"
434 local dev=${SINGLEMDS}_dev
437 if [ ! -e "$MDSDEV" ]; then
438 echo "no $MDSDEV existing, so mount Lustre to create one"
440 check_mount || return 41
444 echo "Remove mds config log"
445 do_facet $SINGLEMDS "debugfs -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
448 start_mds && return 42
451 run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
454 [ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return
456 local dev=${SINGLEMDS}_dev
462 # check if current MDSSIZE is large enough
463 [ $MDSSIZE -ge $MIN ] && OK=1 && myMDSSIZE=$MDSSIZE && \
464 log "use MDSSIZE=$MDSSIZE"
466 # check if the global config has a large enough MDSSIZE
467 [ -z "$OK" -a ! -z "$STORED_MDSSIZE" ] && [ $STORED_MDSSIZE -ge $MIN ] && \
468 OK=1 && myMDSSIZE=$STORED_MDSSIZE && \
469 log "use STORED_MDSSIZE=$STORED_MDSSIZE"
471 # check if the block device is large enough
472 [ -z "$OK" -a -b $MDSDEV ] && \
473 [ "$(dd if=$MDSDEV of=/dev/null bs=1k count=1 skip=$MIN 2>&1 |
474 awk '($3 == "in") { print $1 }')" = "1+0" ] && OK=1 && \
475 myMDSSIZE=$MIN && log "use device $MDSDEV with MIN=$MIN"
477 # check if a loopback device has enough space for fs metadata (5%)
478 [ -z "$OK" ] && [ -f $MDSDEV -o ! -e $MDSDEV ] &&
479 SPACE=$(df -P $(dirname $MDSDEV) |
480 awk '($1 != "Filesystem") {print $4}') &&
481 [ $SPACE -gt $((MIN / 20)) ] && OK=1 && myMDSSIZE=$MIN && \
482 log "use file $MDSDEV with MIN=$MIN"
484 [ -z "$OK" ] && skip "$MDSDEV too small for ${MIN}kB MDS" && return
487 echo "mount mds with large journal..."
488 local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
490 MDS_MKFS_OPTS="--mgs --mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
493 echo "mount lustre system..."
495 check_mount || return 41
497 echo "check journal size..."
498 local FOUNDSIZE=`do_facet mds "debugfs -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}'`
499 if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
500 log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
502 error "expected journal size > 32M, found $((FOUNDSIZE >> 20))M"
507 MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
510 run_test 18 "check mkfs creates large journals"
513 start_mds || return 1
514 stop_mds -f || return 2
516 run_test 19a "start/stop MDS without OSTs"
519 start_ost || return 1
520 stop_ost -f || return 2
522 run_test 19b "start/stop OSTs without MDS"
525 # first format the ost/mdt
529 check_mount || return 43
531 remount_client ro $MOUNT || return 44
532 touch $DIR/$tfile && echo "$DIR/$tfile created incorrectly" && return 45
533 [ -e $DIR/$tfile ] && echo "$DIR/$tfile exists incorrectly" && return 46
534 remount_client rw $MOUNT || return 47
536 [ ! -f $DIR/$tfile ] && echo "$DIR/$tfile missing" && return 48
537 MCNT=`grep -c $MOUNT /etc/mtab`
538 [ "$MCNT" -ne 1 ] && echo "$MOUNT in /etc/mtab $MCNT times" && return 49
543 run_test 20 "remount ro,rw mounts work and doesn't break /etc/mtab"
551 run_test 21a "start mds before ost, stop ost first"
559 run_test 21b "start ost before mds, stop mds first"
568 #writeconf to remove all ost2 traces for subsequent tests
571 run_test 21c "start mds between two osts, stop mds last"
576 echo Client mount with ost in logs, but none running
580 # check_mount will block trying to contact ost
584 echo Client mount with a running ost
587 # if gss enabled, wait full time to let connection from
588 # mds to ost be established, due to the mismatch between
589 # initial connect timeout and gss context negotiation timeout.
590 # This perhaps could be remove after AT landed.
591 echo "sleep $((TIMEOUT + TIMEOUT + TIMEOUT))s"
592 sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
595 check_mount || return 41
600 run_test 22 "start a client before osts (should return errs)"
602 test_23a() { # was test_23
606 # force down client so that recovering mds waits for reconnect
607 local running=$(grep -c $MOUNT /proc/mounts) || true
608 if [ $running -ne 0 ]; then
609 echo "Stopping client $MOUNT (opts: -f)"
613 # enter recovery on mds
615 # try to start a new client
616 mount_client $MOUNT &
618 MOUNT_PID=$(ps -ef | grep "t lustre" | grep -v grep | awk '{print $2}')
619 MOUNT_LUSTRE_PID=`ps -ef | grep mount.lustre | grep -v grep | awk '{print $2}'`
620 echo mount pid is ${MOUNT_PID}, mount.lustre pid is ${MOUNT_LUSTRE_PID}
622 ps --ppid $MOUNT_LUSTRE_PID
623 # FIXME why o why can't I kill these? Manual "ctrl-c" works...
624 kill -TERM $MOUNT_LUSTRE_PID
625 echo "waiting for mount to finish"
627 # we can not wait $MOUNT_PID because it is not a child of this shell
633 while [ "$WAIT" -lt "$MAX_WAIT" ]; do
635 PID1=$(ps -ef | awk '{print $2}' | grep -w $MOUNT_PID)
636 PID2=$(ps -ef | awk '{print $2}' | grep -w $MOUNT_LUSTRE_PID)
639 [ -z "$PID1" -a -z "$PID2" ] && break
640 echo "waiting for mount to finish ... "
641 WAIT=$(( WAIT + sleep))
643 [ "$WAIT" -eq "$MAX_WAIT" ] && error "MOUNT_PID $MOUNT_PID and \
644 MOUNT__LUSTRE_PID $MOUNT__LUSTRE_PID still not killed in $WAIT secs"
649 run_test 23a "interrupt client during recovery mount delay"
654 test_23b() { # was test_23
657 # Simulate -EINTR during mount OBD_FAIL_LDLM_CLOSE_THREAD
658 lctl set_param fail_loc=0x80000313
662 run_test 23b "Simulate -EINTR during mount"
664 fs2mds_HOST=$mds_HOST
665 fs2ost_HOST=$ost_HOST
669 echo "umount $MOUNT2 ..."
670 umount $MOUNT2 || true
671 echo "stopping fs2mds ..."
672 stop fs2mds -f || true
673 echo "stopping fs2ost ..."
674 stop fs2ost -f || true
681 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
682 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
683 do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
684 skip "mixed loopback and real device not working" && return
687 local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
688 local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
690 # test 8-char fsname as well
691 local FSNAME2=test1234
692 add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --nomgs --mgsnode=$MGSNID --reformat $fs2mdsdev || exit 10
694 add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2ostdev || exit 10
697 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
698 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
700 mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || return 1
702 check_mount || return 2
703 # files written on 1 should not show up on 2
704 cp /etc/passwd $DIR/$tfile
706 [ -e $MOUNT2/$tfile ] && error "File bleed" && return 7
709 cp /etc/passwd $MOUNT2/b || return 3
710 rm $MOUNT2/b || return 4
711 # 2 is actually mounted
712 grep $MOUNT2' ' /proc/mounts > /dev/null || return 5
714 facet_failover fs2mds
715 facet_failover fs2ost
718 # the MDS must remain up until last MDT
720 MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
721 [ -z "$MDS" ] && error "No MDT" && return 8
723 cleanup_nocli || return 6
725 run_test 24a "Multiple MDTs on a single node"
728 if [ -z "$fs2mds_DEV" ]; then
729 do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
730 skip "mixed loopback and real device not working" && return
733 local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
735 add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME}2 --mgs --reformat $fs2mdsdev || exit 10
737 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && return 2
740 run_test 24b "Multiple MGSs on a single node (should return err)"
744 check_mount || return 2
745 local MODULES=$($LCTL modules | awk '{ print $2 }')
746 rmmod $MODULES 2>/dev/null || true
749 run_test 25 "Verify modules are referenced"
753 # we need modules before mount for sysctl, so make sure...
754 do_facet $SINGLEMDS "lsmod | grep -q lustre || modprobe lustre"
755 #define OBD_FAIL_MDS_FS_SETUP 0x135
756 do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000135"
757 start_mds && echo MDS started && return 1
758 lctl get_param -n devices
759 DEVS=$(lctl get_param -n devices | wc -l)
760 [ $DEVS -gt 0 ] && return 2
761 unload_modules || return 203
763 run_test 26 "MDT startup failure cleans LOV (should return errs)"
774 while [ $WAIT -lt $MAX ]; do
775 RESULT=$(do_node $node "$TEST")
776 if [ $RESULT -eq $FINAL ]; then
777 echo "Updated config after $WAIT sec: wanted $FINAL got $RESULT"
780 WAIT=$((WAIT + sleep))
781 echo "Waiting $((MAX - WAIT)) secs for config update"
784 echo "Config update not seen after $MAX sec: wanted $FINAL got $RESULT"
792 local ORIG=$(do_facet $myfacet "$TEST")
793 if [ $# -gt 3 ]; then
799 echo "Setting $PARAM from $ORIG to $FINAL"
800 do_facet $SINGLEMDS "$LCTL conf_param $PARAM=$FINAL" || error conf_param failed
802 wait_update $(facet_host $myfacet) "$TEST" $FINAL || error check failed!
806 start_ost || return 1
807 start_mds || return 2
808 echo "Requeue thread should have started: "
809 ps -e | grep ll_cfg_requeue
810 set_and_check ost1 "lctl get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
813 run_test 27a "Reacquire MGS lock if OST started first"
818 local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
820 facet_failover $SINGLEMDS
821 set_and_check $SINGLEMDS "lctl get_param -n mdt.$device.identity_acquire_expire" "$device.mdt.identity_acquire_expire" || return 3
822 set_and_check client "lctl get_param -n mdc.$device-mdc-*.max_rpcs_in_flight" "$device.mdc.max_rpcs_in_flight" || return 4
826 run_test 27b "Reacquire MGS lock after failover"
830 TEST="lctl get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
831 PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
834 set_and_check client "$TEST" "$PARAM" $FINAL || return 3
835 FINAL=$(($FINAL + 1))
836 set_and_check client "$TEST" "$PARAM" $FINAL || return 4
837 umount_client $MOUNT || return 200
840 if [ $RESULT -ne $FINAL ]; then
841 echo "New config not seen: wanted $FINAL got $RESULT"
844 echo "New config success: got $RESULT"
846 set_and_check client "$TEST" "$PARAM" $ORIG || return 5
849 run_test 28 "permanent parameter setting"
852 [ "$OSTCOUNT" -lt "2" ] && skip "$OSTCOUNT < 2, skipping" && return
853 setup > /dev/null 2>&1
857 local PARAM="$FSNAME-OST0001.osc.active"
858 local PROC_ACT="osc.$FSNAME-OST0001-osc-[^M]*.active"
859 local PROC_UUID="osc.$FSNAME-OST0001-osc-[^M]*.ost_server_uuid"
861 ACTV=$(lctl get_param -n $PROC_ACT)
863 set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $DEAC || return 2
864 # also check ost_server_uuid status
865 RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV)
866 if [ -z "$RESULT" ]; then
867 echo "Live client not deactivated: $(lctl get_param -n $PROC_UUID)"
870 echo "Live client success: got $RESULT"
874 local MPROC="osc.$FSNAME-OST0001-osc-[M]*.active"
879 RESULT=`do_facet $SINGLEMDS " lctl get_param -n $MPROC"`
880 [ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
881 if [ $RESULT -eq $DEAC ]; then
882 echo "MDT deactivated also after $WAIT sec (got $RESULT)"
886 if [ $WAIT -eq $MAX ]; then
887 echo "MDT not deactivated: wanted $DEAC got $RESULT"
890 echo "Waiting $(($MAX - $WAIT)) secs for MDT deactivated"
893 # test new client starts deactivated
894 umount_client $MOUNT || return 200
896 RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV | grep NEW)
897 if [ -z "$RESULT" ]; then
898 echo "New client not deactivated from start: $(lctl get_param -n $PROC_UUID)"
901 echo "New client success: got $RESULT"
904 # make sure it reactivates
905 set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $ACTV || return 6
910 #writeconf to remove all ost2 traces for subsequent tests
917 run_test 29 "permanently remove an OST"
922 TEST="lctl get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
924 LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
925 for i in ${LIST[@]}; do
926 set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
928 # make sure client restart still works
930 mount_client $MOUNT || return 4
931 [ "$($TEST)" -ne "$i" ] && return 5
932 set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $ORIG || return 6
935 run_test 30 "Big config llog"
937 test_31() { # bug 10734
938 # ipaddr must not exist
939 mount -t lustre 4.3.2.1@tcp:/lustre $MOUNT || true
942 run_test 31 "Connect to non-existent node (shouldn't crash)"
944 # Use these start32/stop32 fn instead of t-f start/stop fn,
945 # for local devices, to skip global facet vars init
949 echo "Stopping local ${MOUNT%/*}/${facet} (opts:$@)"
950 umount -d $@ ${MOUNT%/*}/${facet}
959 mkdir -p ${MOUNT%/*}/${facet}
961 echo "Starting local ${facet}: $@ $device ${MOUNT%/*}/${facet}"
962 mount -t lustre $@ ${device} ${MOUNT%/*}/${facet}
964 if [ $RC -ne 0 ]; then
965 echo "mount -t lustre $@ ${device} ${MOUNT%/*}/${facet}"
966 echo "Start of ${device} of local ${facet} failed ${RC}"
980 echo "Cleanup test_32 umount $MOUNT ..."
981 umount -f $MOUNT || true
982 echo "Cleanup local mds ost1 ..."
988 # this test is totally useless on a client-only system
989 [ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
990 [ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
991 [ -z "$TUNEFS" ] && skip "No tunefs" && return 0
992 local DISK1_8=$LUSTRE/tests/disk1_8.tgz
993 [ ! -r $DISK1_8 ] && skip "Cannot find $DISK1_8" && return 0
996 tar xjvf $DISK1_8 -C $TMP/$tdir || \
997 { skip "Cannot untar $DISK1_8" && return 0; }
1000 lctl set_param debug=$PTLDEBUG
1002 $TUNEFS $tmpdir/mds || error "tunefs failed"
1004 # nids are wrong, so client wont work, but server should start
1005 start32 mds $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
1006 trap cleanup_32 EXIT INT || return 3
1008 local UUID=$(lctl get_param -n mds.lustre-MDT0000.uuid)
1010 [ "$UUID" == "mdsA_UUID" ] || error "UUID is wrong: $UUID"
1012 $TUNEFS --mgsnode=`hostname` $tmpdir/ost1 || error "tunefs failed"
1013 start32 ost1 $tmpdir/ost1 "-o loop" || return 5
1014 UUID=$(lctl get_param -n obdfilter.lustre-OST0000.uuid)
1016 [ "$UUID" == "ost1_UUID" ] || error "UUID is wrong: $UUID"
1018 local NID=$($LCTL list_nids | head -1)
1020 echo "OSC changes should return err:"
1021 $LCTL conf_param lustre-OST0000.osc.max_dirty_mb=15 && return 7
1022 $LCTL conf_param lustre-OST0000.failover.node=$NID && return 8
1024 echo "MDC changes should succeed:"
1025 $LCTL conf_param lustre-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
1026 $LCTL conf_param lustre-MDT0000.failover.node=$NID || return 10
1029 # With a new good MDT failover nid, we should be able to mount a client
1030 # (but it cant talk to OST)
1031 local mountopt="-o exclude=lustre-OST0000"
1033 local device=`h2$NETTYPE $HOSTNAME`:/lustre
1034 echo "Starting local client: $HOSTNAME: $mountopt $device $MOUNT"
1035 mount -t lustre $mountopt $device $MOUNT || return 1
1037 local old=$(lctl get_param -n mdc.*.max_rpcs_in_flight)
1038 local new=$((old + 5))
1039 lctl conf_param lustre-MDT0000.mdc.max_rpcs_in_flight=$new
1040 wait_update $HOSTNAME "lctl get_param -n mdc.*.max_rpcs_in_flight" $new || return 11
1044 # mount a second time to make sure we didnt leave upgrade flag on
1046 $TUNEFS --dryrun $tmpdir/mds || error "tunefs failed"
1047 start32 mds $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
1048 trap cleanup_32 EXIT INT || return 12
1052 rm -rf $tmpdir || true # true is only for TMP on NFS
1054 run_test 32a "Upgrade from 1.8 (not live)"
1057 # this test is totally useless on a client-only system
1058 [ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
1059 [ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
1060 [ -z "$TUNEFS" ] && skip "No tunefs" && return
1062 local DISK1_8=$LUSTRE/tests/disk1_8.tgz
1063 [ ! -r $DISK1_8 ] && skip "Cannot find $DISK1_8" && return 0
1064 local tmpdir=$TMP/$tdir
1066 tar xjvf $DISK1_8 -C $tmpdir || \
1067 { skip "Cannot untar $DISK1_8" && return ; }
1070 lctl set_param debug=$PTLDEBUG
1071 local NEWNAME=lustre
1073 # writeconf will cause servers to register with their current nids
1074 $TUNEFS --writeconf --fsname=$NEWNAME $tmpdir/mds || error "tunefs failed"
1075 start32 mds1 $tmpdir/mds "-o loop" && \
1076 trap cleanup_32 EXIT INT || return 3
1078 local UUID=$(lctl get_param -n mdt.${NEWNAME}-MDT0000.uuid)
1080 [ "$UUID" == "${NEWNAME}-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
1082 $TUNEFS --mgsnode=`hostname` --writeconf --fsname=$NEWNAME $tmpdir/ost1 || error "tunefs failed"
1083 start32 ost1 $tmpdir/ost1 "-o loop" || return 5
1084 UUID=$(lctl get_param -n obdfilter.${NEWNAME}-OST0000.uuid)
1086 [ "$UUID" == "${NEWNAME}-OST0000_UUID" ] || error "UUID is wrong: $UUID"
1088 echo "OSC changes should succeed:"
1089 $LCTL conf_param ${NEWNAME}-OST0000.osc.max_dirty_mb=15 || return 7
1090 $LCTL conf_param ${NEWNAME}-OST0000.failover.node=$NID || return 8
1092 echo "MDC changes should succeed:"
1093 $LCTL conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
1096 # MDT and OST should have registered with new nids, so we should have
1097 # a fully-functioning client
1098 echo "Check client and old fs contents"
1100 local device=`h2$NETTYPE $HOSTNAME`:/$NEWNAME
1101 echo "Starting local client: $HOSTNAME: $device $MOUNT"
1102 mount -t lustre $device $MOUNT || return 1
1104 local old=$(lctl get_param -n mdc.*.max_rpcs_in_flight)
1105 local new=$((old + 5))
1106 lctl conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=$new
1107 wait_update $HOSTNAME "lctl get_param -n mdc.*.max_rpcs_in_flight" $new || return 11
1109 [ "$(cksum $MOUNT/passwd | cut -d' ' -f 1,2)" == "94306271 1478" ] || return 12
1114 rm -rf $tmpdir || true # true is only for TMP on NFS
1116 run_test 32b "Upgrade from 1.8 with writeconf"
1118 test_33a() { # bug 12333, was test_33
1120 local FSNAME2=test-123
1121 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
1123 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
1124 do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
1125 skip "mixed loopback and real device not working" && return
1128 local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
1129 local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
1130 add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
1131 add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --index=8191 --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
1133 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
1134 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
1135 do_facet $SINGLEMDS "$LCTL conf_param $FSNAME2.sys.timeout=200" || rc=1
1137 mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || rc=2
1140 cp /etc/hosts $MOUNT2/ || rc=3
1141 $LFS getstripe $MOUNT2/hosts
1146 rm -rf $MOUNT2 $fs2mdsdev $fs2ostdev
1147 cleanup_nocli || rc=6
1150 run_test 33a "Mount ost with a large index number"
1152 test_33b() { # was test_34
1155 do_facet client dd if=/dev/zero of=$MOUNT/24 bs=1024k count=1
1156 # Drop lock cancelation reply during umount
1157 #define OBD_FAIL_LDLM_CANCEL 0x304
1158 do_facet client lctl set_param fail_loc=0x80000304
1159 #lctl set_param debug=-1
1160 umount_client $MOUNT
1163 run_test 33b "Drop cancel during umount"
1167 do_facet client "sh runmultiop_bg_pause $DIR/file O_c"
1168 manual_umount_client
1170 do_facet client killall -USR1 multiop
1171 if [ $rc -eq 0 ]; then
1172 error "umount not fail!"
1177 run_test 34a "umount with opened file should be fail"
1182 touch $DIR/$tfile || return 1
1183 stop_mds --force || return 2
1185 manual_umount_client --force
1187 if [ $rc -ne 0 ]; then
1188 error "mtab after failed umount - rc $rc"
1194 run_test 34b "force umount with failed mds should be normal"
1198 touch $DIR/$tfile || return 1
1199 stop_ost --force || return 2
1201 manual_umount_client --force
1203 if [ $rc -ne 0 ]; then
1204 error "mtab after failed umount - rc $rc"
1210 run_test 34c "force umount with failed ost should be normal"
1212 test_35() { # bug 12459
1215 DBG_SAVE="`lctl get_param -n debug`"
1216 lctl set_param debug="ha"
1218 log "Set up a fake failnode for the MDS"
1220 local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
1221 do_facet $SINGLEMDS $LCTL conf_param ${device}.failover.node=$FAKENID || return 4
1223 log "Wait for RECONNECT_INTERVAL seconds (10s)"
1226 MSG="conf-sanity.sh test_35 `date +%F%kh%Mm%Ss`"
1229 log "Stopping the MDT:"
1230 stop_mds || return 5
1232 df $MOUNT > /dev/null 2>&1 &
1234 log "Restarting the MDT:"
1235 start_mds || return 6
1236 log "Wait for df ($DFPID) ... "
1239 lctl set_param debug="$DBG_SAVE"
1241 # retrieve from the log the first server that the client tried to
1242 # contact after the connection loss
1243 $LCTL dk $TMP/lustre-log-$TESTNAME.log
1244 NEXTCONN=`awk "/${MSG}/ {start = 1;}
1245 /import_select_connection.$device-mdc.* using connection/ {
1247 if (\\\$NF ~ /$FAKENID/)
1253 }" $TMP/lustre-log-$TESTNAME.log`
1254 [ "$NEXTCONN" != "0" ] && log "The client didn't try to reconnect to the last active server (tried ${NEXTCONN} instead)" && return 7
1257 run_test 35 "Reconnect to the last active server first"
1261 local FSNAME2=test1234
1262 local fs3ost_HOST=$ost_HOST
1264 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
1267 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
1268 do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
1269 skip "mixed loopback and real device not working" && return
1271 [ $OSTCOUNT -lt 2 ] && skip "skipping test for single OST" && return
1273 [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
1274 { skip "remote OST" && return 0; }
1276 local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
1277 local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
1278 local fs3ostdev=${fs3ost_DEV:-$(ostdevname 2)_2}
1279 add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
1280 # XXX after we support non 4K disk blocksize, change following --mkfsoptions with
1282 add fs2ost $OST_MKFS_OPTS --mkfsoptions='-b4096' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
1283 add fs3ost $OST_MKFS_OPTS --mkfsoptions='-b4096' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs3ostdev || exit 10
1285 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
1286 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
1287 start fs3ost $fs3ostdev $OST_MOUNT_OPTS
1289 mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || return 1
1291 sleep 5 # until 11778 fixed
1293 dd if=/dev/zero of=$MOUNT2/$tfile bs=1M count=7 || return 2
1295 BKTOTAL=`lctl get_param -n obdfilter.*.kbytestotal | awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
1296 BKFREE=`lctl get_param -n obdfilter.*.kbytesfree | awk 'BEGIN{free=0}; {free+=$1}; END{print free}'`
1297 BKAVAIL=`lctl get_param -n obdfilter.*.kbytesavail | awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}'`
1298 STRING=`df -P $MOUNT2 | tail -n 1 | awk '{print $2","$3","$4}'`
1299 DFTOTAL=`echo $STRING | cut -d, -f1`
1300 DFUSED=`echo $STRING | cut -d, -f2`
1301 DFAVAIL=`echo $STRING | cut -d, -f3`
1302 DFFREE=$(($DFTOTAL - $DFUSED))
1304 ALLOWANCE=$((64 * $OSTCOUNT))
1306 if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
1307 [ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
1308 echo "**** FAIL: df total($DFTOTAL) mismatch OST total($BKTOTAL)"
1311 if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
1312 [ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
1313 echo "**** FAIL: df free($DFFREE) mismatch OST free($BKFREE)"
1316 if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
1317 [ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
1318 echo "**** FAIL: df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
1323 stop fs3ost -f || return 200
1324 stop fs2ost -f || return 201
1325 stop fs2mds -f || return 202
1326 rm -rf $MOUNT2 $fs2mdsdev $fs2ostdev $fs3ostdev
1327 unload_modules || return 203
1330 run_test 36 "df report consistency on OSTs with different block size"
1333 [ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
1334 LOCAL_MDSDEV="$TMP/mdt.img"
1335 SYM_MDSDEV="$TMP/sym_mdt.img"
1337 echo "MDS : $LOCAL_MDSDEV"
1338 echo "SYMLINK : $SYM_MDSDEV"
1342 mkfs.lustre --reformat --fsname=lustre --mdt --mgs --device-size=9000 $LOCAL_MDSDEV ||
1343 error "mkfs.lustre $LOCAL_MDSDEV failed"
1344 ln -s $LOCAL_MDSDEV $SYM_MDSDEV
1346 echo "mount symlink device - $SYM_MDSDEV"
1348 mount_op=`mount -v -t lustre -o loop $SYM_MDSDEV ${MOUNT%/*}/mds 2>&1 | grep "unable to set tunable"`
1349 umount -d ${MOUNT%/*}/mds
1350 rm -f $LOCAL_MDSDEV $SYM_MDSDEV
1352 if [ -n "$mount_op" ]; then
1353 error "**** FAIL: set tunables failed for symlink device"
1357 run_test 37 "verify set tunables works for symlink device"
1359 test_38() { # bug 14222
1364 FILES=`find $SRC -type f -mtime +1 | head -n $COUNT`
1365 log "copying $(echo $FILES | wc -w) files to $DIR/$tdir"
1367 tar cf - $FILES | tar xf - -C $DIR/$tdir || \
1368 error "copying $SRC to $DIR/$tdir"
1370 umount_client $MOUNT
1372 log "rename lov_objid file on MDS"
1373 rm -f $TMP/lov_objid.orig
1375 local dev=${SINGLEMDS}_dev
1376 local MDSDEV=${!dev}
1377 do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.orig\\\" $MDSDEV"
1378 do_facet $SINGLEMDS "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
1380 do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.orig"
1381 # check create in mds_lov_connect
1385 [ $V ] && log "verifying $DIR/$tdir/$f"
1386 diff -q $f $DIR/$tdir/$f || ERROR=y
1388 do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new\\\" $MDSDEV"
1389 do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new"
1390 [ "$ERROR" = "y" ] && error "old and new files are different after connect" || true
1392 # check it's updates in sync
1393 umount_client $MOUNT
1396 do_facet $SINGLEMDS dd if=/dev/zero of=$TMP/lov_objid.clear bs=4096 count=1
1397 do_facet $SINGLEMDS "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
1398 do_facet $SINGLEMDS "debugfs -w -R \\\"write $TMP/lov_objid.clear lov_objid\\\" $MDSDEV "
1403 [ $V ] && log "verifying $DIR/$tdir/$f"
1404 diff -q $f $DIR/$tdir/$f || ERROR=y
1406 do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new1\\\" $MDSDEV"
1407 do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new1"
1408 umount_client $MOUNT
1410 [ "$ERROR" = "y" ] && error "old and new files are different after sync" || true
1412 log "files compared the same"
1415 run_test 38 "MDS recreates missing lov_objid file from OST data"
1421 perl $SRCDIR/leak_finder.pl $TMP/debug 2>&1 | egrep '*** Leak:' &&
1422 error "memory leak detected" || true
1424 run_test 39 "leak_finder recognizes both LUSTRE and LNET malloc messages"
1426 test_40() { # bug 15759
1428 #define OBD_FAIL_TGT_TOOMANY_THREADS 0x706
1429 do_facet $SINGLEMDS "sysctl -w lustre.fail_loc=0x80000706"
1433 run_test 40 "race during service thread startup"
1435 test_41() { #bug 14134
1437 local dev=${SINGLEMDS}_dev
1438 local MDSDEV=${!dev}
1440 start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
1441 start ost1 `ostdevname 1` $OST_MOUNT_OPTS
1442 start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs
1444 mount_client $MOUNT || return 1
1447 echo "blah blah" > $MOUNT/$tfile
1450 umount_client $MOUNT
1451 stop ost1 -f || return 201
1452 stop_mds -f || return 202
1453 stop_mds -f || return 203
1454 unload_modules || return 204
1457 run_test 41 "mount mds with --nosvc and --nomgs"
1459 test_42() { #bug 14693
1461 check_mount || return 2
1462 do_facet client lctl conf_param lustre.llite.some_wrong_param=10
1463 umount_client $MOUNT
1464 mount_client $MOUNT || return 1
1468 run_test 42 "invalid config param should not prevent client from mounting"
1470 umount_client $MOUNT
1475 check_mount || return 2
1480 #define OBD_FAIL_PTLRPC_LONG_UNLINK 0x50f
1481 do_facet client "lctl set_param fail_loc=0x50f"
1484 manual_umount_client --force || return 3
1485 do_facet client "lctl set_param fail_loc=0x0"
1487 mount_client $MOUNT || return 4
1491 run_test 45 "long unlink handling in ptlrpcd"
1496 start_mds || return 1
1497 #first client should see only one ost
1498 start_ost || return 2
1500 mount_client $MOUNT || return 3
1502 start_ost2 || return 4
1503 start ost3 `ostdevname 3` $OST_MOUNT_OPTS || return 5
1504 start ost4 `ostdevname 4` $OST_MOUNT_OPTS || return 6
1505 start ost5 `ostdevname 5` $OST_MOUNT_OPTS || return 7
1506 # wait until ost2-5 is sync
1508 #second client see both ost's
1510 mount_client $MOUNT2 || return 8
1511 $LFS setstripe $MOUNT2 -c -1 || return 9
1512 $LFS getstripe $MOUNT2 || return 10
1514 echo "ok" > $MOUNT2/widestripe
1515 $LFS getstripe $MOUNT2/widestripe || return 11
1516 # fill acl buffer for avoid expand lsm to them
1517 awk -F : '{if (FNR < 25) { print "u:"$1":rwx" }}' /etc/passwd | while read acl; do
1518 setfacl -m $acl $MOUNT2/widestripe
1522 stat $MOUNT/widestripe || return 12
1524 umount_client $MOUNT2 || return 13
1525 umount_client $MOUNT || return 14
1526 stop ost5 -f || return 20
1527 stop ost4 -f || return 21
1528 stop ost3 -f || return 22
1529 stop_ost2 || return 23
1530 stop_ost || return 24
1531 stop_mds || return 25
1533 run_test 46a "handle ost additional - wide striped file"
1536 equals_msg `basename $0`: test complete
1537 [ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true