3 # add uml1 uml2 uml3 in your /etc/hosts
5 # FIXME - there is no reason to use all of these different
6 # return codes, espcially when most of them are mapped to something
7 # else anyway. The combination of test number and return code
8 # figure out what failed.
13 PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
15 LUSTRE=${LUSTRE:-`dirname $0`/..}
16 RLUSTRE=${RLUSTRE:-$LUSTRE}
17 MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
19 . $LUSTRE/tests/test-framework.sh
23 . ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
28 add_mds mds1 --dev $MDSDEV --size $MDSSIZE
29 add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES\
30 --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
31 add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
32 add_client client mds1 --lov lov1 --path $MOUNT
38 add_mds mds2 --dev $MDSDEV --size $MDSSIZE
39 add_lov lov2 mds2 --stripe_sz $STRIPE_BYTES\
40 --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
41 add_ost ost2 --lov lov2 --dev $OSTDEV --size $OSTSIZE
42 add_client client --mds mds2 --lov lov2 --path $MOUNT2
46 echo "start mds1 service on `facet_active_host mds1`"
47 start mds1 --reformat $MDSLCONFARGS || return 94
48 start_lsvcgssd || return 501
52 echo "stop mds1 service on `facet_active_host mds1`"
53 stop mds1 $@ || return 97
58 echo "start ost service on `facet_active_host ost`"
59 start ost --reformat $OSTLCONFARGS || return 95
63 echo "stop ost service on `facet_active_host ost`"
64 stop ost $@ || return 98
69 start_lgssd || return 502
70 echo "mount lustre on ${MOUNTPATH}....."
71 zconf_mount `hostname` $MOUNTPATH || return 96
76 echo "umount lustre on ${MOUNTPATH}....."
77 zconf_umount `hostname` $MOUNTPATH || return 97
81 manual_umount_client(){
82 echo "manual umount lustre on ${MOUNTPATH}...."
83 do_facet client "umount $MOUNT"
94 umount_client $MOUNT || return 200
95 stop_mds || return 201
96 stop_ost || return 202
97 # catch case where these return just fine, but modules are still not unloaded
98 /sbin/lsmod | grep -q portals
100 echo "modules still loaded..."
106 do_facet client "touch $DIR/a" || return 71
107 do_facet client "rm $DIR/a" || return 72
108 echo "setup single mount lustre success"
112 do_facet client "touch $DIR/a" || return 71
113 do_facet client "rm $DIR/a" || return 72
114 do_facet client "touch $DIR2/a" || return 73
115 do_facet client "rm $DIR2/a" || return 74
116 echo "setup double mount lustre success"
121 #create single point mountpoint
124 start_krb5_kdc || exit 1
131 check_mount || return 41
134 run_test 0 "single mount setup"
138 echo "start ost second time..."
139 start ost --reformat $OSTLCONFARGS
142 check_mount || return 42
145 run_test 1 "start up ost twice"
150 echo "start mds second time.."
151 start mds1 --reformat $MDSLCONFARGS
154 check_mount || return 43
157 run_test 2 "start up mds twice"
163 check_mount || return 44
168 run_test 3 "mount client twice"
172 touch $DIR/$tfile || return 85
176 # ok for ost to fail shutdown
177 if [ 202 -ne $eno ]; then
182 run_test 4 "force cleanup ost, then cleanup"
186 touch $DIR/$tfile || return 1
187 stop_mds --force || return 2
189 # cleanup may return an error from the failed
190 # disconnects; for now I'll consider this successful
191 # if all the modules have unloaded.
193 # as MDS is down, umount without -f may cause blocking
194 # and this test will never finish. Blocking is possible
195 # as umount may want to cancel locks with RPC's and these
196 # RPC's will wait forever, as pinger thread will try to
197 # recover failed import endlessly.
199 # Thus, main point is: nobody should expect umount finish
200 # quickly and cleanly without -f flag when MDS or OST is
201 # down for sure. --umka
205 echo "killing umount"
206 kill -TERM $UMOUNT_PID
207 echo "waiting for umount to finish"
211 # cleanup client modules
212 $LCONF --force --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
214 # stop_mds is a no-op here, and should not fail
217 # this should have --force flag specified, as umount -f
218 # will skip disconnect phase and thus OST will have one
219 # extra refcount what will cause class_cleanup() failure
220 # if --force is not specified. --umka
221 stop_ost --force || return 5
223 lsmod | grep -q portals && return 6
226 run_test 5 "force cleanup mds, then cleanup --force"
233 [ -d $MOUNT ] || mkdir -p $MOUNT
234 $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
235 start_lgssd || return 1
236 llmount -o nettype=$NETTYPE $mds_HOST://mds_svc/client_facet $MOUNT && exit 2
238 # cleanup client modules
239 $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
242 # stop_mds is a no-op here, and should not fail
246 lsmod | grep -q portals && return 5
250 run_test 5b "mds down, cleanup after failed mount (bug 2712)"
256 [ -d $MOUNT ] || mkdir -p $MOUNT
257 $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
258 start_lgssd || return 1
259 llmount -o nettype=$NETTYPE $mds_HOST://wrong_mds_svc/client_facet $MOUNT && return 2
261 # cleanup client modules
262 $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
268 lsmod | grep -q portals && return 5
272 run_test 5c "cleanup after failed mount (bug 2712)"
279 [ -d $MOUNT ] || mkdir -p $MOUNT
280 $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
281 start_lgssd || return 1
282 llmount $mds_HOST://mds1_svc/client_facet $MOUNT || return 1
284 umount $MOUNT || return 2
285 # cleanup client modules
286 $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
291 lsmod | grep -q portals && return 4
295 run_test 5d "ost down, don't crash during mount attempt"
300 mount_client ${MOUNT} || return 87
301 touch $DIR/a || return 86
304 run_test 6 "manual umount, then mount again"
311 run_test 7 "manual umount, then cleanup"
320 check_mount2 || return 45
322 umount_client $MOUNT2
327 run_test 8 "double mount setup"
330 # backup the old values of PTLDEBUG and SUBSYSTEM
331 OLDPTLDEBUG=$PTLDEBUG
332 OLDSUBSYSTEM=$SUBSYSTEM
334 # generate new configuration file with lmc --ptldebug and --subsystem
339 # check the result of lmc --ptldebug/subsystem
343 CHECK_PTLDEBUG="`cat /proc/sys/portals/debug`"
344 if [ $CHECK_PTLDEBUG = "1" ]; then
345 echo "lmc --debug success"
347 echo "lmc --debug: want 1, have $CHECK_PTLDEBUG"
350 CHECK_SUBSYSTEM="`cat /proc/sys/portals/subsystem_debug`"
351 if [ $CHECK_SUBSYSTEM = "2" ]; then
352 echo "lmc --subsystem success"
354 echo "lmc --subsystem: want 2, have $CHECK_SUBSYSTEM"
357 check_mount || return 41
360 # the new PTLDEBUG/SUBSYSTEM used for lconf --ptldebug/subsystem
361 PTLDEBUG="inode+trace"
364 # check lconf --ptldebug/subsystem overriding lmc --ptldebug/subsystem
367 CHECK_PTLDEBUG="`do_facet mds1 cat /proc/sys/portals/debug`"
368 if [ $CHECK_PTLDEBUG = "3" ]; then
369 echo "lconf --debug success"
371 echo "lconf --debug: want 3, have $CHECK_PTLDEBUG"
374 CHECK_SUBSYSTEM="`do_facet mds1 cat /proc/sys/portals/subsystem_debug`"
375 if [ $CHECK_SUBSYSTEM = "20" ]; then
376 echo "lconf --subsystem success"
378 echo "lconf --subsystem: want 20, have $CHECK_SUBSYSTEM"
382 check_mount || return 41
385 # resume the old configuration
386 PTLDEBUG=$OLDPTLDEBUG
387 SUBSYSTEM=$OLDSUBSYSTEM
391 run_test 9 "test --ptldebug and --subsystem for lmc and lconf"
394 echo "generate configuration with the same name for node and mds"
395 OLDXMLCONFIG=$XMLCONFIG
396 XMLCONFIG="broken.xml"
397 [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
401 echo "the name for node and mds is the same"
402 do_lmc --add mds --node ${facet}_facet --mds ${facet}_facet \
403 --dev $MDSDEV --size $MDSSIZE || return $?
404 do_lmc --add lov --mds ${facet}_facet --lov lov1 --stripe_sz \
405 $STRIPE_BYTES --stripe_cnt $STRIPES_PER_OBJ \
406 --stripe_pattern 0 || return $?
407 add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
409 add_facet $facet --lustre_upcall $UPCALL
410 do_lmc --add mtpt --node ${facet}_facet --mds mds1_facet \
411 --lov lov1 --path $MOUNT
417 check_mount || return 41
421 XMLCONFIG=$OLDXMLCONFIG
423 run_test 10 "mount lustre with the same name for node and mds"
426 OLDXMLCONFIG=$XMLCONFIG
427 XMLCONFIG="conf11.xml"
429 [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
430 add_mds mds1 --dev $MDSDEV --size $MDSSIZE
431 add_ost ost --dev $OSTDEV --size $OSTSIZE
432 add_client client mds1 --path $MOUNT --ost ost_svc || return $?
433 echo "Default lov config success!"
435 [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
436 add_mds mds1 --dev $MDSDEV --size $MDSSIZE
437 add_ost ost --dev $OSTDEV --size $OSTSIZE
438 add_client client mds1 --path $MOUNT && return $?
439 echo "--add mtpt with neither --lov nor --ost will return error"
443 XMLCONFIG=$OLDXMLCONFIG
445 run_test 11 "use default lov configuration (should return error)"
448 OLDXMLCONFIG=$XMLCONFIG
449 XMLCONFIG="batch.xml"
450 BATCHFILE="batchfile"
453 [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
454 [ -f "$BATCHFILE" ] && rm -f $BATCHFILE
455 echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
456 echo "--add mds --node localhost --mds mds1 --mkfsoptions \"-I 128\"" >> $BATCHFILE
457 # --mkfsoptions "-I 128"
458 do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
459 if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
460 echo "matched double quote success"
462 echo "matched double quote fail"
467 echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
468 echo "--add mds --node localhost --mds mds1 --mkfsoptions \"-I 128" >> $BATCHFILE
469 # --mkfsoptions "-I 128
470 do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
471 echo "unmatched double quote should return error"
475 echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
476 echo "--add mds --node localhost --mds mds1 --mkfsoptions '-I 128'" >> $BATCHFILE
477 # --mkfsoptions '-I 128'
478 do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
479 if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
480 echo "matched single quote success"
482 echo "matched single quote fail"
487 echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
488 echo "--add mds --node localhost --mds mds1 --mkfsoptions '-I 128" >> $BATCHFILE
489 # --mkfsoptions '-I 128
490 do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
491 echo "unmatched single quote should return error"
495 echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
496 echo "--add mds --node localhost --mds mds1 --mkfsoptions \-\I\ \128" >> $BATCHFILE
497 # --mkfsoptions \-\I\ \128
498 do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
499 if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
500 echo "backslash followed by a whitespace/letter success"
502 echo "backslash followed by a whitespace/letter fail"
507 echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
508 echo "--add mds --node localhost --mds mds1 --mkfsoptions -I\ 128\\" >> $BATCHFILE
509 # --mkfsoptions -I\ 128\
510 do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
511 echo "backslash followed by nothing should return error"
514 XMLCONFIG=$OLDXMLCONFIG
516 run_test 12 "lmc --batch, with single/double quote, backslash in batchfile"
519 OLDXMLCONFIG=$XMLCONFIG
520 XMLCONFIG="conf13-1.xml"
521 SECONDXMLCONFIG="conf13-2.xml"
523 # check long uuid will be truncated properly and uniquely
524 echo "To generate XML configuration file(with long ost name): $XMLCONFIG"
525 [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
526 do_lmc --add net --node localhost --nid localhost.localdomain --nettype tcp
527 do_lmc --add mds --node localhost --mds mds1_name_longer_than_31characters
528 do_lmc --add mds --node localhost --mds mds2_name_longer_than_31characters
529 if [ ! -f "$XMLCONFIG" ]; then
530 echo "Error:no file $XMLCONFIG created!"
533 EXPECTEDMDS1UUID="e_longer_than_31characters_UUID"
534 EXPECTEDMDS2UUID="longer_than_31characters_UUID_2"
535 FOUNDMDS1UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '1p' \
536 | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
537 FOUNDMDS2UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '2p' \
538 | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
539 if ([ $EXPECTEDMDS1UUID = $FOUNDMDS1UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS2UUID ]) || \
540 ([ $EXPECTEDMDS1UUID = $FOUNDMDS2UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS1UUID ]); then
541 echo "Success:long uuid truncated successfully and being unique."
543 echo "Error:expected uuid for mds1 and mds2: $EXPECTEDMDS1UUID; $EXPECTEDMDS2UUID"
544 echo "but: found uuid for mds1 and mds2: $FOUNDMDS1UUID; $FOUNDMDS2UUID"
548 # check multiple invocations for lmc generate same XML configuration file
550 echo "Generate the first XML configuration file"
552 echo "mv $XMLCONFIG to $SECONDXMLCONFIG"
553 mv $XMLCONFIG $SECONDXMLCONFIG || return $?
554 echo "Generate the second XML configuration file"
556 if [ `diff $XMLCONFIG $SECONDXMLCONFIG | wc -l` -eq 0 ]; then
557 echo "Success:multiple invocations for lmc generate same XML file"
559 echo "Error: multiple invocations for lmc generate different XML file"
564 rm -f $SECONDXMLCONFIG
565 XMLCONFIG=$OLDXMLCONFIG
567 run_test 13 "check new_uuid of lmc operating correctly"
572 # create xml file with --mkfsoptions for ost
573 echo "create xml file with --mkfsoptions for ost"
574 add_mds mds1 --dev $MDSDEV --size $MDSSIZE
575 add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES\
576 --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
577 add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE \
578 --mkfsoptions "-Llabel_conf_14"
579 add_client client mds1 --lov lov1 --path $MOUNT
581 FOUNDSTRING=`awk -F"<" '/<mkfsoptions>/{print $2}' $XMLCONFIG`
582 EXPECTEDSTRING="mkfsoptions>-Llabel_conf_14"
583 if [ $EXPECTEDSTRING != $FOUNDSTRING ]; then
584 echo "Error: expected: $EXPECTEDSTRING; found: $FOUNDSTRING"
587 echo "Success:mkfsoptions for ost written to xml file correctly."
589 # mount lustre to test lconf mkfsoptions-parsing
593 mount_client $MOUNT || return $?
594 if [ -z "`dumpe2fs -h $OSTDEV | grep label_conf_14`" ]; then
595 echo "Error: the mkoptions not applied to mke2fs of ost."
599 echo "lconf mkfsoptions for ost success"
603 run_test 14 "test mkfsoptions of ost for lmc and lconf"
607 [ -f $MOUNTLUSTRE ] && echo "remove $MOUNTLUSTRE" && rm -f $MOUNTLUSTRE
608 if [ -f $MOUNTLUSTRE.sav ]; then
609 echo "return original $MOUNTLUSTRE.sav to $MOUNTLUSTRE"
610 mv $MOUNTLUSTRE.sav $MOUNTLUSTRE
617 echo "mount lustre on ${MOUNT} with $MOUNTLUSTRE....."
618 if [ -f "$MOUNTLUSTRE" ]; then
619 echo "save $MOUNTLUSTRE to $MOUNTLUSTRE.sav"
620 mv $MOUNTLUSTRE $MOUNTLUSTRE.sav
622 [ -f "$MOUNTLUSTRE" ] && echo "can't move $MOUNTLUSTRE" && return 40
623 trap cleanup_15 EXIT INT
624 [ ! `cp $LUSTRE/utils/llmount $MOUNTLUSTRE` ] || return $?
625 do_node `hostname` mkdir -p $MOUNT 2> /dev/null
626 # load llite module on the client if it isn't in /lib/modules
627 do_node `hostname` $LCONF --nosetup --node client_facet $XMLCONFIG
628 do_node `hostname` mount -t lustre -o nettype=$NETTYPE \
629 `facet_active_host mds1`:/mds1_svc/client_facet $MOUNT ||return $?
630 echo "mount lustre on $MOUNT with $MOUNTLUSTRE: success"
631 [ -d /r ] && $LCTL modules > /r/tmp/ogdb-`hostname`
632 check_mount || return 41
633 do_node `hostname` umount $MOUNT
635 [ -f "$MOUNTLUSTRE" ] && rm -f $MOUNTLUSTRE
636 echo "mount lustre on ${MOUNT} without $MOUNTLUSTRE....."
637 do_node `hostname` mount -t lustre -o nettype=$NETTYPE \
638 `facet_active_host mds1`:/mds1_svc/client_facet $MOUNT &&return $?
639 echo "mount lustre on $MOUNT without $MOUNTLUSTRE failed as expected"
643 run_test 15 "zconf-mount without /sbin/mount.lustre (should return error)"
647 echo $value | grep -q "^[[:digit:]]*$"
652 TMPMTPT="/mnt/conf16"
654 if [ ! -f "$MDSDEV" ]; then
655 echo "no $MDSDEV existing, so mount Lustre to create one"
659 check_mount || return 41
663 echo "change the mode of $MDSDEV/OBJECTS,LOGS,PENDING to 555"
664 [ -d $TMPMTPT ] || mkdir -p $TMPMTPT
665 mount -o loop -t ext3 $MDSDEV $TMPMTPT || return $?
666 chmod 555 $TMPMTPT/OBJECTS || return $?
667 chmod 555 $TMPMTPT/LOGS || return $?
668 chmod 555 $TMPMTPT/PENDING || return $?
669 umount $TMPMTPT || return $?
671 echo "mount Lustre to change the mode of OBJECTS/LOGS/PENDING, then umount Lustre"
675 check_mount || return 41
678 echo "read the mode of OBJECTS/LOGS/PENDING and check if they has been changed properly"
679 EXPECTEDOBJECTSMODE=`debugfs -R "stat OBJECTS" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
680 EXPECTEDLOGSMODE=`debugfs -R "stat LOGS" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
681 EXPECTEDPENDINGMODE=`debugfs -R "stat PENDING" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
683 # check if values are empty
684 test "x$EXPECTEDOBJECTSMODE" = "x" && EXPECTEDOBJECTSMODE="<empty>"
685 test "x$EXPECTEDLOGSMODE" = "x" && EXPECTEDLOGSMODE="<empty>"
686 test "x$EXPECTEDPENDINGMODE" = "x" && EXPECTEDPENDINGMODE="<empty>"
688 # check if values are valid digits
689 is_digit $EXPECTEDOBJECTSMODE || {
690 echo "Invalid OBJECTS mode obtained from debugfs: $EXPECTEDOBJECTSMODE"
694 is_digit $EXPECTEDLOGSMODE || {
695 echo "Invalid LOGS mode obtained from debugfs: $EXPECTEDLOGSMODE"
699 is_digit $EXPECTEDPENDINGMODE || {
700 echo "Invalid PINDING mode obtained from debugfs: $EXPECTEDPENDINGMODE"
704 # check if values are those we expected
705 if [ "x$EXPECTEDOBJECTSMODE" = "x0777" ]; then
706 echo "Success: Lustre change the mode of OBJECTS correctly"
708 echo "Error: Lustre does not change the mode of OBJECTS properly"
709 echo "Expected value: 0777, actual one: $EXPECTEDOBJECTSMODE"
713 if [ "x$EXPECTEDLOGSMODE" = "x0777" ]; then
714 echo "Success: Lustre change the mode of LOGS correctly"
716 echo "Error: Lustre does not change the mode of LOGS properly"
717 echo "Expected value: 0777, actual one: $EXPECTEDLOGSMODE"
721 if [ "x$EXPECTEDPENDINGMODE" = "x0777" ]; then
722 echo "Success: Lustre change the mode of PENDING correctly"
724 echo "Error: Lustre does not change the mode of PENDING properly"
725 echo "Expected value: 0777, actual one: $EXPECTEDPENDINGMODE"
729 run_test 16 "verify that lustre will correct the mode of OBJECTS/LOGS/PENDING"
732 TMPMTPT="/mnt/conf17"
734 if [ ! -f "$MDSDEV" ]; then
735 echo "no $MDSDEV existing, so mount Lustre to create one"
739 check_mount || return 41
743 echo "Remove mds config log"
744 [ -d $TMPMTPT ] || mkdir -p $TMPMTPT
745 mount -o loop -t ext3 $MDSDEV $TMPMTPT || return $?
746 rm -f $TMPMTPT/LOGS/mds1_svc || return $?
747 umount $TMPMTPT || return $?
750 start mds1 $MDSLCONFARGS && return 42
753 run_test 17 "Verify failed mds_postsetup won't fail assertion (2936)"
756 [ -f $MDSDEV ] && echo "remove $MDSDEV" && rm -f $MDSDEV
757 echo "mount mds with large journal..."
762 echo "mount lustre system..."
766 check_mount || return 41
768 echo "check journal size..."
769 FOUNDJOURNALSIZE=`debugfs -R "stat <8>" $MDSDEV | awk '/Size: / { print $6; exit;}'`
770 if [ $FOUNDJOURNALSIZE = "79691776" ]; then
771 echo "Success:lconf creates large journals"
773 echo "Error:lconf not create large journals correctly"
774 echo "expected journal size: 79691776(76M), found journal size: $FOUNDJOURNALSIZE"
783 run_test 18 "check lconf creates large journals"