7 # bug number for skipped test: LU-8972
8 ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 101"
9 # UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
13 if [ -r /etc/SuSE-release ]
15 local vers=$(grep VERSION /etc/SuSE-release | awk '{print $3}')
16 local patchlev=$(grep PATCHLEVEL /etc/SuSE-release |
18 if [ $vers -eq 11 ] && [ $patchlev -eq 2 ]
26 if is_sles11; then # LU-2181
27 ALWAYS_EXCEPT="$ALWAYS_EXCEPT 23a 34b"
30 if [ "$FAILURE_MODE" = "HARD" ]; then
31 CONFIG_EXCEPTIONS="24a " &&
32 echo "Except the tests: $CONFIG_EXCEPTIONS for " \
33 "FAILURE_MODE=$FAILURE_MODE, b=23573" &&
34 ALWAYS_EXCEPT="$ALWAYS_EXCEPT $CONFIG_EXCEPTIONS"
37 # bug number for skipped test:
38 # a tool to create lustre filesystem images
39 ALWAYS_EXCEPT="32newtarball $ALWAYS_EXCEPT"
42 PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
44 PTLDEBUG=${PTLDEBUG:--1}
46 LUSTRE=${LUSTRE:-$(dirname $0)/..}
47 RLUSTRE=${RLUSTRE:-$LUSTRE}
48 export MULTIOP=${MULTIOP:-multiop}
50 . $LUSTRE/tests/test-framework.sh
52 . ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
54 # use small MDS + OST size to speed formatting time
55 # do not use too small MDSSIZE/OSTSIZE, which affect the default journal size
56 # STORED_MDSSIZE is used in test_18
57 STORED_MDSSIZE=$MDSSIZE
58 STORED_OSTSIZE=$OSTSIZE
70 if ! combined_mgs_mds; then
71 # bug number for skipped test: 23954
72 ALWAYS_EXCEPT="$ALWAYS_EXCEPT 24b"
75 # pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
76 if [[ "$LDISKFS_MKFS_OPTS" != *lazy_itable_init* ]]; then
77 LDISKFS_MKFS_OPTS=$(csa_add "$LDISKFS_MKFS_OPTS" -E lazy_itable_init)
80 [ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
81 # bug number for skipped test:
82 ALWAYS_EXCEPT="$ALWAYS_EXCEPT"
87 require_dsh_mds || exit 0
88 require_dsh_ost || exit 0
91 [ "$SLOW" = "no" ] && EXCEPT_SLOW="45 69"
96 # The MGS must be started before the OSTs for a new fs, so start
97 # and stop to generate the startup logs.
100 wait_osc_import_state mds ost FULL
105 reformat_and_config() {
107 if ! combined_mgs_mds ; then
113 writeconf_or_reformat() {
114 # There are at most 2 OSTs for write_conf test
115 # who knows if/where $TUNEFS is installed?
116 # Better reformat if it fails...
117 writeconf_all $MDSCOUNT 2 ||
118 { echo "tunefs failed, reformatting instead" &&
119 reformat_and_config && return 0; }
129 start mgs $(mgsdevname) $MGS_MOUNT_OPTS
135 local dev=$(mdsdevname $num)
138 echo "start mds service on `facet_active_host $facet`"
139 start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
145 local dev=$(mdsdevname $num)
148 echo "stop mds service on `facet_active_host $facet`"
149 # These tests all use non-failover stop
150 stop $facet -f || return 97
156 for num in $(seq $MDSCOUNT); do
157 start_mdt $num $@ || return 94
162 if ! combined_mgs_mds ; then
170 for num in $(seq $MDSCOUNT); do
171 stop_mdt $num || return 97
176 echo "stop mgs service on `facet_active_host mgs`"
177 # These tests all use non-failover stop
178 stop mgs -f || return 97
182 echo "start ost1 service on `facet_active_host ost1`"
183 start ost1 $(ostdevname 1) $OST_MOUNT_OPTS $@ || return 95
187 echo "stop ost1 service on `facet_active_host ost1`"
188 # These tests all use non-failover stop
189 stop ost1 -f || return 98
193 echo "start ost2 service on `facet_active_host ost2`"
194 start ost2 $(ostdevname 2) $OST_MOUNT_OPTS $@ || return 92
198 echo "stop ost2 service on `facet_active_host ost2`"
199 # These tests all use non-failover stop
200 stop ost2 -f || return 93
205 echo "mount $FSNAME on ${MOUNTPATH}....."
206 zconf_mount $(hostname) $MOUNTPATH || return 96
210 local mountopt="remount,$1"
212 echo "remount '$1' lustre on ${MOUNTPATH}....."
213 zconf_mount $(hostname) $MOUNTPATH "$mountopt" || return 96
219 echo "umount lustre on $mountpath....."
220 zconf_umount $HOSTNAME $mountpath $@ || return 97
223 manual_umount_client(){
226 echo "manual umount lustre on ${MOUNT}...."
227 do_facet client "umount ${FORCE} $MOUNT"
233 start_mds || error "MDT start failed"
234 start_ost || error "Unable to start OST1"
235 mount_client $MOUNT || error "client start failed"
236 client_up || error "client_up failed"
245 unload_modules_conf () {
246 if combined_mgs_mds || ! local_mode; then
247 unload_modules || return 1
252 stop_ost || return 202
253 stop_mds || return 201
254 unload_modules_conf || return 203
259 [ "x$1" != "x" ] && force='-f'
260 umount_client $MOUNT $force|| return 200
261 cleanup_nocli || return $?
266 echo "umount $MOUNT2 ..."
267 umount $MOUNT2 || true
268 echo "stopping fs2mds ..."
269 stop fs2mds -f || true
270 echo "stopping fs2ost ..."
271 stop fs2ost -f || true
275 do_facet client "cp /etc/passwd $DIR/a" || return 71
276 do_facet client "rm $DIR/a" || return 72
277 # make sure lustre is actually mounted (touch will block,
278 # but grep won't, so do it after)
279 do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
280 echo "setup single mount lustre success"
284 do_facet client "touch $DIR/a" || return 71
285 do_facet client "rm $DIR/a" || return 72
286 do_facet client "touch $DIR2/a" || return 73
287 do_facet client "rm $DIR2/a" || return 74
288 echo "setup double mount lustre success"
293 if [ "$ONLY" == "setup" ]; then
298 if [ "$ONLY" == "cleanup" ]; then
305 #create single point mountpoint
311 check_mount || error "check_mount failed"
312 cleanup || error "cleanup failed with $?"
314 run_test 0 "single mount setup"
317 start_mds || error "MDS start failed"
318 start_ost || error "unable to start OST"
319 echo "start ost second time..."
320 start_ost && error "2nd OST start should fail"
321 mount_client $MOUNT || error "client start failed"
322 check_mount || error "check_mount failed"
323 cleanup || error "cleanup failed with $?"
325 run_test 1 "start up ost twice (should return errors)"
328 start_mds || error "MDT start failed"
329 echo "start mds second time.."
330 start_mds && error "2nd MDT start should fail"
331 start_ost || error "OST start failed"
332 mount_client $MOUNT || error "mount_client failed to start client"
333 check_mount || error "check_mount failed"
334 cleanup || error "cleanup failed with $?"
336 run_test 2 "start up mds twice (should return err)"
340 #mount.lustre returns an error if already in mtab
341 mount_client $MOUNT && error "2nd client mount should fail"
342 check_mount || error "check_mount failed"
343 cleanup || error "cleanup failed with $?"
345 run_test 3 "mount client twice (should return err)"
349 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
350 stop_ost || error "Unable to stop OST1"
351 umount_client $MOUNT -f || error “unmount $MOUNT failed”
354 # ok for ost to fail shutdown
355 if [ 202 -ne $eno ] && [ 0 -ne $eno ]; then
356 error "cleanup failed with $?"
359 run_test 4 "force cleanup ost, then cleanup"
361 test_5a() { # was test_5
363 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
364 fuser -m -v $MOUNT && echo "$MOUNT is in use by user space process."
366 stop_mds || error "Unable to stop MDS"
368 # cleanup may return an error from the failed
369 # disconnects; for now I'll consider this successful
370 # if all the modules have unloaded.
374 echo "killing umount"
375 kill -TERM $UMOUNT_PID
376 echo "waiting for umount to finish"
378 if grep " $MOUNT " /proc/mounts; then
379 echo "test 5: /proc/mounts after failed umount"
383 echo "killing umount"
384 kill -TERM $UMOUNT_PID
385 echo "waiting for umount to finish"
387 grep " $MOUNT " /proc/mounts &&
388 error "/proc/mounts after second umount"
391 # manual_mount_client may fail due to umount succeeding above
393 # stop_mds is a no-op here, and should not fail
394 cleanup_nocli || error "cleanup_nocli failed with $?"
395 # df may have lingering entry
397 # mtab may have lingering entry
401 while [ "$WAIT" -ne "$MAX_WAIT" ]; do
403 grep -q $MOUNT" " /etc/mtab || break
404 echo "Waiting /etc/mtab updated ... "
405 WAIT=$(( WAIT + sleep))
407 [ "$WAIT" -eq "$MAX_WAIT" ] &&
408 error "/etc/mtab is not updated in $WAIT secs"
409 echo "/etc/mtab updated in $WAIT secs"
411 run_test 5a "force cleanup mds, then cleanup"
419 grep " $MOUNT " /etc/mtab &&
420 error false "unexpected entry in mtab before mount" && return 10
422 start_ost || error "OST start failed"
423 if ! combined_mgs_mds ; then
424 trap cleanup_5b EXIT ERR
425 start_mds || error "MDS start failed"
429 mount_client $MOUNT && error "mount_client $MOUNT should fail"
430 grep " $MOUNT " /etc/mtab &&
431 error "$MOUNT entry in mtab after failed mount"
433 # stop_mds is a no-op here, and should not fail
434 cleanup_nocli || error "cleanup_nocli failed with $?"
435 if ! combined_mgs_mds ; then
439 run_test 5b "Try to start a client with no MGS (should return errs)"
442 grep " $MOUNT " /etc/mtab &&
443 error false "unexpected entry in mtab before mount" && return 10
445 start_mds || error "MDS start failed"
446 start_ost || error "OST start failed"
447 local oldfs="${FSNAME}"
448 FSNAME="wrong.${FSNAME}"
449 mount_client $MOUNT || :
451 grep " $MOUNT " /etc/mtab &&
452 error "$MOUNT entry in mtab after failed mount"
454 cleanup_nocli || error "cleanup_nocli failed with $?"
456 run_test 5c "cleanup after failed mount (bug 2712) (should return errs)"
459 grep " $MOUNT " /etc/mtab &&
460 error "unexpected entry in mtab before mount"
462 start_ost || error "OST start failed"
463 start_mds || error "MDS start failed"
464 stop_ost -f || error "Unable to stop OST1"
465 mount_client $MOUNT || error "mount_client $MOUNT failed"
466 umount_client $MOUNT -f || error "umount_client $MOUNT failed"
467 cleanup_nocli || error "cleanup_nocli failed with $?"
468 ! grep " $MOUNT " /etc/mtab ||
469 error "$MOUNT entry in mtab after unmount"
471 run_test 5d "mount with ost down"
474 grep " $MOUNT " /etc/mtab &&
475 error false "unexpected entry in mtab before mount" && return 10
477 start_mds || error "MDS start failed"
478 start_ost || error "OST start failed"
480 #define OBD_FAIL_PTLRPC_DELAY_SEND 0x506
481 do_facet client "$LCTL set_param fail_loc=0x80000506"
482 mount_client $MOUNT || echo "mount failed (not fatal)"
483 cleanup || error "cleanup failed with $?"
484 grep " $MOUNT " /etc/mtab &&
485 error "$MOUNT entry in mtab after unmount"
488 run_test 5e "delayed connect, don't crash (bug 10268)"
491 if combined_mgs_mds ; then
492 skip "needs separate mgs and mds"
496 grep " $MOUNT " /etc/mtab &&
497 error false "unexpected entry in mtab before mount" && return 10
500 start_ost || error "OST start failed"
501 mount_client $MOUNT &
503 echo client_mount pid is $pid
507 if ! ps -f -p $pid >/dev/null; then
510 grep " $MOUNT " /etc/mtab && echo "test 5f: mtab after mount"
511 error "mount returns $rc, expected to hang"
513 cleanup || error "cleanup failed with $?"
518 start_mds || error "start MDS failed"
520 # mount should succeed after start mds
522 grep " $MOUNT " /etc/mtab && echo "test 5f: mtab after mount"
523 cleanup || error "final call to cleanup failed with rc $?"
525 run_test 5f "mds down, cleanup after failed mount (bug 2712)"
529 [ $(lustre_version_code client) -lt $(version_code 2.9.53) ] &&
530 { skip "automount of debugfs missing before 2.9.53" && return 0; }
531 umount /sys/kernel/debug
532 $LCTL get_param -n devices | egrep -v "error" && \
533 error "lctl can't access debugfs data"
534 grep " debugfs " /etc/mtab || error "debugfs failed to remount"
536 run_test 5g "handle missing debugfs"
541 mount_client $MOUNT || error "mount_client $MOUNT failed"
542 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
543 cleanup || error "cleanup failed with rc $?"
545 run_test 6 "manual umount, then mount again"
550 cleanup_nocli || error "cleanup_nocli failed with $?"
552 run_test 7 "manual umount, then cleanup"
556 mount_client $MOUNT2 || error "mount_client $MOUNT2 failed"
557 check_mount2 || error "check_mount2 failed"
558 umount_client $MOUNT2 || error "umount_client $MOUNT2 failed"
559 cleanup || error "cleanup failed with rc $?"
561 run_test 8 "double mount setup"
564 start_ost || error "OST start failed"
566 do_facet ost1 $LCTL set_param debug=\'inode trace\' ||
567 error "do_facet ost1 set_param inode trace failed."
568 do_facet ost1 $LCTL set_param subsystem_debug=\'mds ost\' ||
569 error "do_facet ost1 set_param debug mds ost failed."
571 CHECK_PTLDEBUG="`do_facet ost1 $LCTL get_param -n debug`"
572 if [ "$CHECK_PTLDEBUG" ] && { \
573 [ "$CHECK_PTLDEBUG" = "trace inode warning error emerg console" ] ||
574 [ "$CHECK_PTLDEBUG" = "trace inode" ]; }; then
575 echo "lnet.debug success"
577 error "lnet.debug: want 'trace inode', have '$CHECK_PTLDEBUG'"
579 CHECK_SUBSYS="`do_facet ost1 $LCTL get_param -n subsystem_debug`"
580 if [ "$CHECK_SUBSYS" ] && [ "$CHECK_SUBSYS" = "mds ost" ]; then
581 echo "lnet.subsystem_debug success"
583 error "lnet.subsystem_debug: want 'mds ost' got '$CHECK_SUBSYS'"
585 stop_ost || error "Unable to stop OST1"
587 run_test 9 "test ptldebug and subsystem for mkfs"
595 do_facet $facet "test -b $dev" || rc=1
596 if [[ "$size" ]]; then
597 local in=$(do_facet $facet "dd if=$dev of=/dev/null bs=1k \
598 count=1 skip=$size 2>&1" |
599 awk '($3 == "in") { print $1 }')
600 [[ $in = "1+0" ]] || rc=1
606 # Test 16 was to "verify that lustre will correct the mode of OBJECTS".
607 # But with new MDS stack we don't care about the mode of local objects
608 # anymore, so this test is removed. See bug 22944 for more details.
612 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
613 skip "ldiskfs only test"
618 check_mount || error "check_mount failed"
619 cleanup || error "cleanup failed with rc $?"
621 echo "Remove mds config log"
622 if ! combined_mgs_mds ; then
626 do_facet mgs "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' \
627 $(mgsdevname) || return \$?" ||
628 error "do_facet mgs failed with $?"
630 if ! combined_mgs_mds ; then
634 start_ost || error "OST start failed"
635 start_mds && error "MDS start succeeded, but should fail"
638 run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
641 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
642 skip "ldiskfs only test"
646 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
651 # check if current MDSSIZE is large enough
652 [ $MDSSIZE -ge $MIN ] && OK=1 && myMDSSIZE=$MDSSIZE &&
653 log "use MDSSIZE=$MDSSIZE"
655 # check if the global config has a large enough MDSSIZE
656 [ -z "$OK" -a ! -z "$STORED_MDSSIZE" ] &&
657 [ $STORED_MDSSIZE -ge $MIN ] &&
658 OK=1 && myMDSSIZE=$STORED_MDSSIZE &&
659 log "use STORED_MDSSIZE=$STORED_MDSSIZE"
661 # check if the block device is large enough
662 is_blkdev $SINGLEMDS $MDSDEV $MIN
663 local large_enough=$?
664 if [ -n "$OK" ]; then
665 [ $large_enough -ne 0 ] && OK=""
667 [ $large_enough -eq 0 ] && OK=1 && myMDSSIZE=$MIN &&
668 log "use device $MDSDEV with MIN=$MIN"
671 # check if a loopback device has enough space for fs metadata (5%)
673 if [ -z "$OK" ]; then
674 local SPACE=$(do_facet $SINGLEMDS "[ -f $MDSDEV -o ! \
675 -e $MDSDEV ] && df -P \\\$(dirname $MDSDEV)" |
676 awk '($1 != "Filesystem") { print $4 }')
677 ! [ -z "$SPACE" ] && [ $SPACE -gt $((MIN / 20)) ] &&
678 OK=1 && myMDSSIZE=$MIN &&
679 log "use file $MDSDEV with MIN=$MIN"
682 [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
684 echo "mount mds with large journal..."
686 local OLD_MDSSIZE=$MDSSIZE
690 echo "mount lustre system..."
692 check_mount || error "check_mount failed"
694 echo "check journal size..."
695 local FOUNDSIZE=$(do_facet $SINGLEMDS "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}')
696 if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
697 log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
699 error "expected journal size > 32M, found $((FOUNDSIZE >> 20))M"
702 cleanup || error "cleanup failed with rc $?"
707 run_test 18 "check mkfs creates large journals"
710 start_mds || error "MDS start failed"
711 stop_mds || error "Unable to stop MDS"
713 run_test 19a "start/stop MDS without OSTs"
716 start_ost || error "Unable to start OST1"
717 stop_ost -f || error "Unable to stop OST1"
719 run_test 19b "start/stop OSTs without MDS"
722 # first format the ost/mdt
723 start_mds || error "MDS start failed"
724 start_ost || error "Unable to start OST1"
725 mount_client $MOUNT || error "mount_client $MOUNT failed"
726 check_mount || error "check_mount failed"
727 rm -f $DIR/$tfile || error "remove $DIR/$tfile failed."
728 remount_client ro $MOUNT || error "remount_client with ro failed"
729 touch $DIR/$tfile && error "$DIR/$tfile created incorrectly"
730 [ -e $DIR/$tfile ] && error "$DIR/$tfile exists incorrectly"
731 remount_client rw $MOUNT || error "remount_client with rw failed"
732 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
733 MCNT=$(grep -c $MOUNT /etc/mtab)
734 [ "$MCNT" -ne 1 ] && error "$MOUNT in /etc/mtab $MCNT times"
736 stop_mds || error "Unable to stop MDS"
737 stop_ost || error "Unable to stop OST1"
739 run_test 20 "remount ro,rw mounts work and doesn't break /etc/mtab"
742 start_mds || error "MDS start failed"
743 start_ost || error "unable to start OST1"
744 wait_osc_import_state mds ost FULL
745 stop_ost || error "unable to stop OST1"
746 stop_mds || error "unable to stop MDS"
748 run_test 21a "start mds before ost, stop ost first"
751 start_ost || error "unable to start OST1"
752 start_mds || error "MDS start failed"
753 wait_osc_import_state mds ost FULL
754 stop_mds || error "unable to stop MDS"
755 stop_ost || error "unable to stop OST1"
757 run_test 21b "start ost before mds, stop mds first"
760 start_ost || error "Unable to start OST1"
761 start_mds || error "MDS start failed"
762 start_ost2 || error "Unable to start OST2"
763 wait_osc_import_state mds ost2 FULL
764 stop_ost || error "Unable to stop OST1"
765 stop_ost2 || error "Unable to stop OST2"
766 stop_mds || error "Unable to stop MDS"
767 #writeconf to remove all ost2 traces for subsequent tests
768 writeconf_or_reformat
770 run_test 21c "start mds between two osts, stop mds last"
773 if combined_mgs_mds ; then
774 skip "need separate mgs device" && return 0
780 start_mgs || error "unable to start MGS"
781 start_ost || error "unable to start OST1"
782 start_ost2 || error "unable to start OST2"
783 start_mds || error "MDS start failed"
784 wait_osc_import_state mds ost2 FULL
786 stop_ost || error "Unable to stop OST1"
787 stop_ost2 || error "Unable to stop OST2"
788 stop_mds || error "Unable to stop MDS"
790 #writeconf to remove all ost2 traces for subsequent tests
791 writeconf_or_reformat
792 start_mgs || error "unable to start MGS"
794 run_test 21d "start mgs then ost and then mds"
797 MGSNID="$saved_mgsnid"
799 echo "stopping fs2mgs ..."
800 stop $fs2mgs -f || true
803 test_21e() { # LU-5863
804 if [[ -z "$fs3ost_DEV" || -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
805 is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
806 skip_env "mixed loopback and real device not working" && return
809 local fs2mdsdev=$(mdsdevname 1_2)
810 local fs2ostdev=$(ostdevname 1_2)
811 local fs3ostdev=$(ostdevname 2_2)
813 local fs2mdsvdev=$(mdsvdevname 1_2)
814 local fs2ostvdev=$(ostvdevname 1_2)
815 local fs3ostvdev=$(ostvdevname 2_2)
817 # temporarily use fs3ost as fs2mgs
819 local fs2mgsdev=$fs3ostdev
820 local fs2mgsvdev=$fs3ostvdev
822 local fsname=test1234
824 add $fs2mgs $(mkfs_opts mgs $fs2mgsdev) --fsname=$fsname \
825 --reformat $fs2mgsdev $fs2mgsvdev || error "add fs2mgs failed"
826 start $fs2mgs $fs2mgsdev $MGS_MOUNT_OPTS && trap cleanup_21e EXIT INT ||
827 error "start fs2mgs failed"
829 local saved_mgsnid="$MGSNID"
830 MGSNID=$(do_facet $fs2mgs $LCTL list_nids | xargs | tr ' ' ,)
832 add fs2mds $(mkfs_opts mds1 $fs2mdsdev $fsname) \
833 --reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
834 add fs2ost $(mkfs_opts ost1 $fs2ostdev $fsname) \
835 --reformat $fs2ostdev $fs2ostvdev || error "add fs2ost failed"
837 start fs2ost $fs2ostdev $OST_MOUNT_OPTS || error "start fs2ost failed"
838 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS || error "start fs2mds failed"
840 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
841 $MOUNT_CMD $MGSNID:/$fsname $MOUNT2 || error "mount $MOUNT2 failed"
842 DIR=$MOUNT2 MOUNT=$MOUNT2 check_mount || error "check $MOUNT2 failed"
846 run_test 21e "separate MGS and MDS"
849 start_mds || error "MDS start failed"
851 echo "Client mount with ost in logs, but none running"
852 start_ost || error "unable to start OST1"
853 # wait until mds connected to ost and open client connection
854 wait_osc_import_state mds ost FULL
855 stop_ost || error "unable to stop OST1"
856 mount_client $MOUNT || error "mount_client $MOUNT failed"
857 # check_mount will block trying to contact ost
858 mcreate $DIR/$tfile || error "mcreate $DIR/$tfile failed"
859 rm -f $DIR/$tfile || error "remove $DIR/$tfile failed"
860 umount_client $MOUNT -f
863 echo "Client mount with a running ost"
864 start_ost || error "unable to start OST1"
866 # if gss enabled, wait full time to let connection from
867 # mds to ost be established, due to the mismatch between
868 # initial connect timeout and gss context negotiation timeout.
869 # This perhaps could be remove after AT landed.
870 echo "sleep $((TIMEOUT + TIMEOUT + TIMEOUT))s"
871 sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
873 mount_client $MOUNT || error "mount_client $MOUNT failed"
874 wait_osc_import_state mds ost FULL
875 wait_osc_import_state client ost FULL
876 check_mount || error "check_mount failed"
879 cleanup || error "cleanup failed with rc $?"
881 run_test 22 "start a client before osts (should return errs)"
883 test_23a() { # was test_23
886 stop $SINGLEMDS || error "failed to stop $SINGLEMDS"
887 # force down client so that recovering mds waits for reconnect
888 local running=$(grep -c $MOUNT /proc/mounts) || true
889 if [ $running -ne 0 ]; then
890 echo "Stopping client $MOUNT (opts: -f)"
894 # enter recovery on failed mds
895 local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
896 start $SINGLEMDS $MDT_DEV $MDS_MOUNT_OPTS || error "MDS start failed"
897 # try to start a new client
898 mount_client $MOUNT &
900 MOUNT_PID=$(ps -ef | grep "t lustre" | grep -v grep | awk '{print $2}')
901 MOUNT_LUSTRE_PID=$(ps -ef | grep mount.lustre |
902 grep -v grep | awk '{print $2}')
903 echo mount pid is ${MOUNT_PID}, mount.lustre pid is ${MOUNT_LUSTRE_PID}
905 ps --ppid $MOUNT_LUSTRE_PID
906 echo "waiting for mount to finish"
908 # "ctrl-c" sends SIGINT but it usually (in script) does not work on child process
909 # SIGTERM works but it does not spread to offspring processses
910 kill -s TERM $MOUNT_PID
911 kill -s TERM $MOUNT_LUSTRE_PID
912 # we can not wait $MOUNT_PID because it is not a child of this shell
918 while [ "$WAIT" -lt "$MAX_WAIT" ]; do
920 PID1=$(ps -ef | awk '{print $2}' | grep -w $MOUNT_PID)
921 PID2=$(ps -ef | awk '{print $2}' | grep -w $MOUNT_LUSTRE_PID)
924 [ -z "$PID1" -a -z "$PID2" ] && break
925 echo "waiting for mount to finish ... "
926 WAIT=$(( WAIT + sleep))
928 if [ "$WAIT" -eq "$MAX_WAIT" ]; then
929 error "MOUNT_PID $MOUNT_PID and "\
930 "MOUNT_LUSTRE_PID $MOUNT_LUSTRE_PID still not killed in $WAIT secs"
933 stop_mds || error "stopping MDSes failed"
934 stop_ost || error "stopping OSSes failed"
936 run_test 23a "interrupt client during recovery mount delay"
941 test_23b() { # was test_23
942 start_mds || error "MDS start failed"
943 start_ost || error "Unable to start OST1"
944 # Simulate -EINTR during mount OBD_FAIL_LDLM_CLOSE_THREAD
945 $LCTL set_param fail_loc=0x80000313
947 cleanup || error "cleanup failed with rc $?"
949 run_test 23b "Simulate -EINTR during mount"
952 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
954 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
955 is_blkdev $SINGLEMDS $MDSDEV &&
956 skip_env "mixed loopback and real device not working" && return
959 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
961 local fs2mdsdev=$(mdsdevname 1_2)
962 local fs2ostdev=$(ostdevname 1_2)
963 local fs2mdsvdev=$(mdsvdevname 1_2)
964 local fs2ostvdev=$(ostvdevname 1_2)
967 # LU-9733 test fsname started with numbers as well
968 local FSNAME2=969362ae
970 add fs2mds $(mkfs_opts mds1 ${fs2mdsdev} ) --nomgs --mgsnode=$MGSNID \
971 --fsname=${FSNAME2} --reformat $fs2mdsdev $fs2mdsvdev || exit 10
973 add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --fsname=${FSNAME2} \
974 --reformat $fs2ostdev $fs2ostvdev || exit 10
977 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT
978 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
979 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
980 $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || error "$MOUNT_CMD failed"
982 # LU-9733 test fsname started with numbers
983 cl_user=$(do_facet $SINGLEMDS lctl --device $FSNAME2-MDT0000 \
984 changelog_register -n) ||
985 error "register changelog failed"
987 do_facet $SINGLEMDS lctl --device $FSNAME2-MDT0000 \
988 changelog_deregister $cl_user ||
989 error "deregister changelog failed"
991 check_mount || error "check_mount failed"
992 # files written on 1 should not show up on 2
993 cp /etc/passwd $DIR/$tfile
995 [ -e $MOUNT2/$tfile ] && error "File bleed"
998 cp /etc/passwd $MOUNT2/$tfile ||
999 error "cp /etc/passwd $MOUNT2/$tfile failed"
1000 rm $MOUNT2/$tfile || error "remove $MOUNT2/$tfile failed"
1001 # 2 is actually mounted
1002 grep $MOUNT2' ' /proc/mounts > /dev/null || error "$MOUNT2 not mounted"
1004 facet_failover fs2mds
1005 facet_failover fs2ost
1007 umount_client $MOUNT
1008 # the MDS must remain up until last MDT
1010 MDS=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
1011 awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
1012 [ -z "$MDS" ] && error "No MDT"
1014 cleanup_nocli || error "cleanup_nocli failed with rc $?"
1016 run_test 24a "Multiple MDTs on a single node"
1019 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
1021 if [ -z "$fs2mds_DEV" ]; then
1022 local dev=${SINGLEMDS}_dev
1023 local MDSDEV=${!dev}
1024 is_blkdev $SINGLEMDS $MDSDEV &&
1025 skip_env "mixed loopback and real device not working" && return
1028 local fs2mdsdev=$(mdsdevname 1_2)
1029 local fs2mdsvdev=$(mdsvdevname 1_2)
1031 add fs2mds $(mkfs_opts mds1 ${fs2mdsdev} ) --mgs --fsname=${FSNAME}2 \
1032 --reformat $fs2mdsdev $fs2mdsvdev || exit 10
1034 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS &&
1035 error "start MDS should fail"
1037 cleanup || error "cleanup failed with rc $?"
1039 run_test 24b "Multiple MGSs on a single node (should return err)"
1043 check_mount || error "check_mount failed"
1044 local MODULES=$($LCTL modules | awk '{ print $2 }')
1045 rmmod $MODULES 2>/dev/null || true
1046 cleanup || error "cleanup failed with $?"
1048 run_test 25 "Verify modules are referenced"
1052 # we need modules before mount for sysctl, so make sure...
1053 do_facet $SINGLEMDS "lsmod | grep -q lustre || modprobe lustre"
1054 #define OBD_FAIL_MDS_FS_SETUP 0x135
1055 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000135"
1056 start_mds && error "MDS started but should not have started"
1057 $LCTL get_param -n devices
1058 DEVS=$($LCTL get_param -n devices | egrep -v MG | wc -l)
1059 [ $DEVS -gt 0 ] && error "number of devices is $DEVS, should be zero"
1060 # start mds to drop writeconf setting
1061 start_mds || error "Unable to start MDS"
1062 stop_mds || error "Unable to stop MDS"
1063 unload_modules_conf || error "unload_modules_conf failed with $?"
1065 run_test 26 "MDT startup failure cleans LOV (should return errs)"
1068 start_ost || error "Unable to start OST1"
1069 start_mds || error "Unable to start MDS"
1070 echo "Requeue thread should have started: "
1071 ps -e | grep ll_cfg_requeue
1072 set_conf_param_and_check ost1 \
1073 "$LCTL get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" \
1074 "$FSNAME-OST0000.ost.client_cache_seconds" ||
1075 error "set_conf_param_and_check ost1 failed"
1076 cleanup_nocli || error "cleanup_nocli failed with rc $?"
1078 run_test 27a "Reacquire MGS lock if OST started first"
1083 local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
1084 awk '($3 ~ "mdt" && $4 ~ "MDT0000") { print $4 }')
1086 facet_failover $SINGLEMDS
1087 set_conf_param_and_check $SINGLEMDS \
1088 "$LCTL get_param -n mdt.$device.identity_acquire_expire" \
1089 "$device.mdt.identity_acquire_expire" ||
1090 error "set_conf_param_and_check $SINGLEMDS failed"
1091 set_conf_param_and_check client \
1092 "$LCTL get_param -n mdc.$device-mdc-*.max_rpcs_in_flight"\
1093 "$device.mdc.max_rpcs_in_flight" ||
1094 error "set_conf_param_and_check client failed"
1096 cleanup || error "cleanup failed with $?"
1098 run_test 27b "Reacquire MGS lock after failover"
1102 TEST="$LCTL get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
1103 PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
1105 FINAL=$(($ORIG + 1))
1106 set_conf_param_and_check client "$TEST" "$PARAM" $FINAL ||
1107 error "first set_conf_param_and_check client failed"
1108 FINAL=$(($FINAL + 1))
1109 set_conf_param_and_check client "$TEST" "$PARAM" $FINAL ||
1110 error "second set_conf_param_and_check client failed"
1111 umount_client $MOUNT || error "umount_client $MOUNT failed"
1112 mount_client $MOUNT || error "mount_client $MOUNT failed"
1114 if [ $RESULT -ne $FINAL ]; then
1115 error "New config not seen: wanted $FINAL got $RESULT"
1117 echo "New config success: got $RESULT"
1119 set_conf_param_and_check client "$TEST" "$PARAM" $ORIG ||
1120 error "third set_conf_param_and_check client failed"
1121 cleanup || error "cleanup failed with rc $?"
1123 run_test 28 "permanent parameter setting"
1125 test_28a() { # LU-4221
1126 [[ $(lustre_version_code ost1) -ge $(version_code 2.5.52) ]] ||
1127 { skip "Need OST version at least 2.5.52" && return 0; }
1128 [ "$(facet_fstype ost1)" = "zfs" ] &&
1129 skip "LU-4221: no such proc params for ZFS OSTs" && return
1136 local device="$FSNAME-OST0000"
1140 # In this test we will set three kinds of proc parameters with
1142 # 1. the ones moved from the OFD to the OSD, and only their
1143 # symlinks kept in obdfilter
1144 # 2. non-symlink ones in the OFD
1145 # 3. non-symlink ones in the OSD
1148 # prepare a symlink parameter in the OFD
1149 name="writethrough_cache_enable"
1150 param="$device.ost.$name"
1151 cmd="$LCTL get_param -n obdfilter.$device.$name"
1153 # conf_param the symlink parameter in the OFD
1154 old=$(do_facet ost1 $cmd)
1155 new=$(((old + 1) % 2))
1156 set_conf_param_and_check ost1 "$cmd" "$param" $new ||
1157 error "lctl conf_param $device.ost.$param=$new failed"
1159 # conf_param the target parameter in the OSD
1160 param="$device.osd.$name"
1161 cmd="$LCTL get_param -n osd-*.$device.$name"
1162 set_conf_param_and_check ost1 "$cmd" "$param" $old ||
1163 error "lctl conf_param $device.osd.$param=$old failed"
1166 # prepare a non-symlink parameter in the OFD
1167 name="client_cache_seconds"
1168 param="$device.ost.$name"
1169 cmd="$LCTL get_param -n obdfilter.$device.$name"
1171 # conf_param the parameter in the OFD
1172 old=$(do_facet ost1 $cmd)
1174 set_conf_param_and_check ost1 "$cmd" "$param" $new ||
1175 error "lctl conf_param $device.ost.$param=$new failed"
1176 set_conf_param_and_check ost1 "$cmd" "$param" $old ||
1177 error "lctl conf_param $device.ost.$param=$old failed"
1180 # prepare a non-symlink parameter in the OSD
1182 param="$device.osd.$name"
1183 cmd="$LCTL get_param -n osd-*.$device.$name"
1185 # conf_param the parameter in the OSD
1186 old=$(do_facet ost1 $cmd)
1187 new=$(((old + 1) % 2))
1188 set_conf_param_and_check ost1 "$cmd" "$param" $new ||
1189 error "lctl conf_param $device.osd.$param=$new failed"
1190 set_conf_param_and_check ost1 "$cmd" "$param" $old ||
1191 error "lctl conf_param $device.osd.$param=$old failed"
1193 cleanup || error "cleanup failed with $?"
1195 run_test 28a "set symlink parameters permanently with conf_param"
1198 [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >= 2 OSTs" && return
1199 setup > /dev/null 2>&1
1200 start_ost2 || error "Unable to start OST2"
1203 local PARAM="$FSNAME-OST0001.osc.active"
1204 local PROC_ACT="osc.$FSNAME-OST0001-osc-[^M]*.active"
1205 local PROC_UUID="osc.$FSNAME-OST0001-osc-[^M]*.ost_server_uuid"
1207 ACTV=$($LCTL get_param -n $PROC_ACT)
1209 set_conf_param_and_check client \
1210 "$LCTL get_param -n $PROC_ACT" "$PARAM" $DEAC ||
1211 error "set_conf_param_and_check client failed"
1212 # also check ost_server_uuid status
1213 RESULT=$($LCTL get_param -n $PROC_UUID | grep DEACTIV)
1214 if [ -z "$RESULT" ]; then
1215 error "Client not deactivated: $($LCTL get_param \
1218 echo "Live client success: got $RESULT"
1222 wait_osp_active ost ${FSNAME}-OST0001 1 0
1224 # test new client starts deactivated
1225 umount_client $MOUNT || error "umount_client $MOUNT failed"
1226 mount_client $MOUNT || error "mount_client $MOUNT failed"
1227 RESULT=$($LCTL get_param -n $PROC_UUID | grep DEACTIV | grep NEW)
1228 if [ -z "$RESULT" ]; then
1229 error "New client start active: $(lctl get_param -n $PROC_UUID)"
1231 echo "New client success: got $RESULT"
1234 # make sure it reactivates
1235 set_conf_param_and_check client \
1236 "$LCTL get_param -n $PROC_ACT" "$PARAM" $ACTV ||
1237 error "lctl get_param $PROC_ACT $PARAM $ACTV failed"
1239 umount_client $MOUNT
1240 stop_ost2 || error "Unable to stop OST2"
1241 cleanup_nocli || error "cleanup_nocli failed with $?"
1242 #writeconf to remove all ost2 traces for subsequent tests
1243 writeconf_or_reformat
1245 run_test 29 "permanently remove an OST"
1250 echo Big config llog
1251 TEST="$LCTL get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
1253 LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
1254 for i in ${LIST[@]}; do
1255 set_conf_param_and_check client "$TEST" \
1256 "$FSNAME.llite.max_read_ahead_whole_mb" $i ||
1257 error "Set $FSNAME.llite.max_read_ahead_whole_mb failed"
1259 # make sure client restart still works
1260 umount_client $MOUNT
1261 mount_client $MOUNT || error "mount_client $MOUNT failed"
1262 [ "$($TEST)" -ne "$i" ] &&
1263 error "Param didn't stick across restart $($TEST) != $i"
1266 echo Erase parameter setting
1267 do_facet mgs "$LCTL conf_param \
1268 -d $FSNAME.llite.max_read_ahead_whole_mb" ||
1269 error "Erase param $FSNAME.llite.max_read_ahead_whole_mb failed"
1270 umount_client $MOUNT
1271 mount_client $MOUNT || error "mount_client $MOUNT failed"
1273 echo "deleted (default) value=$FINAL, orig=$ORIG"
1274 # assumes this parameter started at the default value
1275 [ "$FINAL" -eq "$ORIG" ] || fail "Deleted value=$FINAL, orig=$ORIG"
1277 cleanup || error "cleanup failed with rc $?"
1279 run_test 30a "Big config llog and conf_param deletion"
1284 local orignids=$($LCTL get_param -n \
1285 osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
1287 local orignidcount=$(echo "$orignids" | wc -w)
1289 # Make a fake nid. Use the OST nid, and add 20 to the least significant
1290 # numerical part of it. Hopefully that's not already a failover address
1292 local OSTNID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | \
1294 local ORIGVAL=$(echo $OSTNID | egrep -oi "[0-9]*@")
1295 local NEWVAL=$((($(echo $ORIGVAL | egrep -oi "[0-9]*") + 20) % 256))
1296 local NEW=$(echo $OSTNID | sed "s/$ORIGVAL/$NEWVAL@/")
1297 echo "Using fake nid $NEW"
1299 local TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
1300 grep failover_nids | sed -n 's/.*\($NEW\).*/\1/p'"
1301 set_conf_param_and_check client "$TEST" \
1302 "$FSNAME-OST0000.failover.node" $NEW ||
1303 error "didn't add failover nid $NEW"
1304 local NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
1307 local NIDCOUNT=$(echo "$NIDS" | wc -w)
1308 echo "should have $((orignidcount + 1)) entries \
1309 in failover nids string, have $NIDCOUNT"
1310 [ $NIDCOUNT -eq $((orignidcount + 1)) ] ||
1311 error "Failover nid not added"
1313 do_facet mgs "$LCTL conf_param -d $FSNAME-OST0000.failover.node" ||
1314 error "conf_param delete failed"
1315 umount_client $MOUNT
1316 mount_client $MOUNT || error "mount_client $MOUNT failed"
1318 NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
1321 NIDCOUNT=$(echo "$NIDS" | wc -w)
1322 echo "only $orignidcount final entries should remain \
1323 in failover nids string, have $NIDCOUNT"
1324 [ $NIDCOUNT -eq $orignidcount ] || error "Failover nids not removed"
1326 cleanup || error "cleanup failed with rc $?"
1328 run_test 30b "Remove failover nids"
1330 test_31() { # bug 10734
1331 # ipaddr must not exist
1332 $MOUNT_CMD 4.3.2.1@tcp:/lustre $MOUNT || true
1333 cleanup || error "cleanup failed with rc $?"
1335 run_test 31 "Connect to non-existent node (shouldn't crash)"
1339 T32_BLIMIT=40960 # Kbytes
1343 # This is not really a test but a tool to create new disk
1344 # image tarballs for the upgrade tests.
1346 # Disk image tarballs should be created on single-node
1347 # clusters by running this test with default configurations
1348 # plus a few mandatory environment settings that are verified
1349 # at the beginning of the test.
1351 test_32newtarball() {
1355 local tmp=$TMP/t32_image_create
1356 local server_version=$(lustre_version_code $SINGLEMDS)
1361 if [ $FSNAME != t32fs -o \( -z "$MDSDEV" -a -z "$MDSDEV1" \) -o \
1362 $OSTCOUNT -ne 1 -o -z "$OSTDEV1" ]; then
1363 error "Needs FSNAME=t32fs MDSCOUNT=2 " \
1364 "MDSDEV1=<nonexistent_file>" \
1365 "MDSDEV2=<nonexistent_file>" \
1366 "(or MDSDEV, in the case of b1_8)" \
1367 "OSTCOUNT=1 OSTDEV1=<nonexistent_file>"
1371 echo "Found stale $tmp"
1375 mkdir $tmp/src || return 1
1376 tar cf - -C $src . | tar xf - -C $tmp/src
1377 dd if=/dev/zero of=$tmp/src/t32_qf_old bs=1M \
1378 count=$(($T32_BLIMIT / 1024 / 4))
1379 chown $T32_QID.$T32_QID $tmp/src/t32_qf_old
1381 # format ost with comma-separated NIDs to verify LU-4460
1382 local failnid="$(h2nettype 1.2.3.4),$(h2nettype 4.3.2.1)"
1383 MGSNID="$MGSNID,$MGSNID" OSTOPT="--failnode=$failnid" formatall
1387 [[ $server_version -ge $(version_code 2.3.50) ]] ||
1388 $LFS quotacheck -ug /mnt/$FSNAME
1389 $LFS setquota -u $T32_QID -b 0 -B $T32_BLIMIT -i 0 -I $T32_ILIMIT \
1392 tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
1394 if [[ $MDSCOUNT -ge 2 ]]; then
1395 remote_dir=/mnt/$FSNAME/remote_dir
1396 $LFS mkdir -i 1 $remote_dir
1397 tar cf - -C $tmp/src . | tar xf - -C $remote_dir
1399 if [[ $server_version -ge $(version_code 2.7.0) ]]; then
1400 striped_dir=/mnt/$FSNAME/striped_dir_old
1401 $LFS mkdir -i 1 -c 2 $striped_dir
1402 tar cf - -C $tmp/src . | tar xf - -C $striped_dir
1408 mkdir $tmp/img || return 1
1412 pushd_dir=/mnt/$FSNAME
1413 if [[ $MDSCOUNT -ge 2 ]]; then
1414 pushd_dir=$remote_dir
1415 if [[ $server_version -ge $(version_code 2.7.0) ]]; then
1417 ls -Rni --time-style=+%s >$tmp/img/list2
1423 ls -Rni --time-style=+%s >$tmp/img/list
1424 find ! -name .lustre -type f -exec sha1sum {} \; |
1425 sort -k 2 >$tmp/img/sha1sums
1427 $LCTL get_param -n version | head -n 1 |
1428 sed -e 's/^lustre: *//' >$tmp/img/commit
1430 [[ $server_version -ge $(version_code 2.3.50) ]] ||
1431 $LFS quotaon -ug /mnt/$FSNAME
1432 $LFS quota -u $T32_QID -v /mnt/$FSNAME
1433 $LFS quota -v -u $T32_QID /mnt/$FSNAME |
1434 awk 'BEGIN { num='1' } { if ($1 == "'/mnt/$FSNAME'") \
1435 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1436 | tr -d "*" > $tmp/img/bspace
1437 $LFS quota -v -u $T32_QID /mnt/$FSNAME |
1438 awk 'BEGIN { num='5' } { if ($1 == "'/mnt/$FSNAME'") \
1439 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1440 | tr -d "*" > $tmp/img/ispace
1441 echo $T32_BLIMIT > $tmp/img/blimit
1442 echo $T32_ILIMIT > $tmp/img/ilimit
1447 find -type f -exec sha1sum {} \; | sort -k 2 >$tmp/sha1sums.src
1450 if ! diff -u $tmp/sha1sums.src $tmp/img/sha1sums; then
1451 echo "Data verification failed"
1454 uname -r >$tmp/img/kernel
1455 uname -m >$tmp/img/arch
1457 mv ${MDSDEV1:-$MDSDEV} $tmp/img
1458 for num in $(seq 2 $MDSCOUNT); do
1459 local devname=$(mdsdevname $num)
1461 [[ $(facet_fstype $facet) != zfs ]] ||
1462 devname=$(mdsvdevname $num)
1463 mv $devname $tmp/img
1465 mv $OSTDEV1 $tmp/img
1467 version=$(sed -e 's/\(^[0-9]\+\.[0-9]\+\)\(.*$\)/\1/' $tmp/img/commit |
1468 sed -e 's/\./_/g') # E.g., "1.8.7" -> "1_8"
1471 tar cjvf $dst/disk$version-$(facet_fstype $SINGLEMDS).tar.bz2 -S *
1476 #run_test 32newtarball "Create a new test_32 disk image tarball for this version"
1479 # The list of applicable tarballs is returned via the caller's
1480 # variable "tarballs".
1483 local node=$(facet_active_host $SINGLEMDS)
1484 local r="do_node $node"
1486 if [ "$CLIENTONLY" ]; then
1487 skip "Client-only testing"
1491 if ! $r which $TUNEFS; then
1492 skip_env "tunefs.lustre required on $node"
1496 local IMGTYPE=$(facet_fstype $SINGLEMDS)
1498 tarballs=$($r find $RLUSTRE/tests -maxdepth 1 \
1499 -name \'disk*-$IMGTYPE.tar.bz2\')
1501 if [ -z "$tarballs" ]; then
1502 skip "No applicable tarballs found"
1507 t32_test_cleanup() {
1509 local facet=$SINGLEMDS
1510 local fstype=$(facet_fstype $facet)
1513 if $shall_cleanup_lustre; then
1514 umount $tmp/mnt/lustre || rc=$?
1516 if $shall_cleanup_mdt; then
1517 $r $UMOUNT $tmp/mnt/mdt || rc=$?
1519 if $shall_cleanup_mdt1; then
1520 $r $UMOUNT $tmp/mnt/mdt1 || rc=$?
1522 if $shall_cleanup_ost; then
1523 $r $UMOUNT $tmp/mnt/ost || rc=$?
1528 if [[ $fstype == zfs ]]; then
1530 local poolname_list="t32fs-mdt1 t32fs-ost1"
1532 ! $mdt2_is_available || poolname_list+=" t32fs-mdt2"
1534 for poolname in $poolname_list; do
1535 destroy_zpool $facet $poolname
1538 combined_mgs_mds || start_mgs || rc=$?
1542 t32_bits_per_long() {
1544 # Yes, this is not meant to be perfect.
1554 t32_reload_modules() {
1556 local all_removed=false
1559 while ((i < 20)); do
1560 echo "Unloading modules on $node: Attempt $i"
1561 do_rpc_nodes $node $LUSTRE_RMMOD $(facet_fstype $SINGLEMDS) &&
1563 do_rpc_nodes $node check_mem_leak || return 1
1564 if $all_removed; then
1565 do_rpc_nodes $node load_modules
1571 echo "Unloading modules on $node: Given up"
1575 t32_wait_til_devices_gone() {
1581 echo wait for devices to go
1582 while ((i < 20)); do
1583 devices=$(do_rpc_nodes $node $LCTL device_list | wc -l)
1584 loops=$(do_rpc_nodes $node losetup -a | grep -c t32)
1585 ((devices == 0 && loops == 0)) && return 0
1589 echo "waiting for dev on $node: dev $devices loop $loops given up"
1590 do_rpc_nodes $node "losetup -a"
1591 do_rpc_nodes $node "$LCTL device_list"
1595 t32_verify_quota() {
1599 local fstype=$(facet_fstype $SINGLEMDS)
1603 # LU-2435: if the underlying zfs doesn't support userobj_accounting,
1604 # lustre will estimate the object count usage. This fails quota
1605 # verification in 32b. The object quota usage should be accurate after
1606 # zfs-0.7.0 is released.
1607 [ $fstype == "zfs" ] && {
1608 local zfs_version=$(do_node $node cat /sys/module/zfs/version)
1610 [ $(version_code $zfs_version) -lt $(version_code 0.7.0) ] && {
1611 echo "Skip quota verify for zfs: $zfs_version"
1616 $LFS quota -u $T32_QID -v $mnt
1618 qval=$($LFS quota -v -u $T32_QID $mnt |
1619 awk 'BEGIN { num='1' } { if ($1 == "'$mnt'") \
1620 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1622 [ $qval -eq $img_bspace ] || {
1623 echo "bspace, act:$qval, exp:$img_bspace"
1627 qval=$($LFS quota -v -u $T32_QID $mnt |
1628 awk 'BEGIN { num='5' } { if ($1 == "'$mnt'") \
1629 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1631 [ $qval -eq $img_ispace ] || {
1632 echo "ispace, act:$qval, exp:$img_ispace"
1636 qval=$($LFS quota -v -u $T32_QID $mnt |
1637 awk 'BEGIN { num='3' } { if ($1 == "'$mnt'") \
1638 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1640 [ $qval -eq $img_blimit ] || {
1641 echo "blimit, act:$qval, exp:$img_blimit"
1645 qval=$($LFS quota -v -u $T32_QID $mnt |
1646 awk 'BEGIN { num='7' } { if ($1 == "'$mnt'") \
1647 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1649 [ $qval -eq $img_ilimit ] || {
1650 echo "ilimit, act:$qval, exp:$img_ilimit"
1654 do_node $node $LCTL conf_param $fsname.quota.mdt=ug
1655 cmd="$LCTL get_param -n osd-$fstype.$fsname-MDT0000"
1656 cmd=$cmd.quota_slave.enabled
1657 wait_update $node "$cmd" "ug" || {
1658 echo "Enable mdt quota failed"
1662 do_node $node $LCTL conf_param $fsname.quota.ost=ug
1663 cmd="$LCTL get_param -n osd-$fstype.$fsname-OST0000"
1664 cmd=$cmd.quota_slave.enabled
1665 wait_update $node "$cmd" "ug" || {
1666 echo "Enable ost quota failed"
1671 runas -u $T32_QID -g $T32_QID dd if=/dev/zero of=$mnt/t32_qf_new \
1672 bs=1M count=$((img_blimit / 1024)) oflag=sync && {
1673 echo "Write succeed, but expect -EDQUOT"
1676 rm -f $mnt/t32_qf_new
1678 runas -u $T32_QID -g $T32_QID createmany -m $mnt/t32_qf_ \
1680 echo "Create succeed, but expect -EDQUOT"
1683 unlinkmany $mnt/t32_qf_ $img_ilimit
1691 local dne_upgrade=${dne_upgrade:-"no"}
1692 local ff_convert=${ff_convert:-"no"}
1693 local shall_cleanup_mdt=false
1694 local shall_cleanup_mdt1=false
1695 local shall_cleanup_ost=false
1696 local shall_cleanup_lustre=false
1697 local mdt2_is_available=false
1698 local node=$(facet_active_host $SINGLEMDS)
1699 local r="do_node $node"
1715 local fstype=$(facet_fstype $SINGLEMDS)
1716 local mdt_dev=$tmp/mdt
1717 local mdt2_dev=$tmp/mdt2
1718 local ost_dev=$tmp/ost
1723 combined_mgs_mds || stop_mgs || error "Unable to stop MGS"
1724 trap 'trap - RETURN; t32_test_cleanup' RETURN
1727 nid=$($r $LCTL list_nids | head -1)
1729 mkdir -p $tmp/mnt/lustre || error "mkdir $tmp/mnt/lustre failed"
1730 $r mkdir -p $tmp/mnt/{mdt,mdt1,ost}
1731 $r tar xjvf $tarball -S -C $tmp || {
1732 error_noexit "Unpacking the disk image tarball"
1735 img_commit=$($r cat $tmp/commit)
1736 img_kernel=$($r cat $tmp/kernel)
1737 img_arch=$($r cat $tmp/arch)
1738 img_bspace=$($r cat $tmp/bspace)
1739 img_ispace=$($r cat $tmp/ispace)
1741 # older images did not have "blimit" and "ilimit" files
1742 # use old values for T32_BLIMIT and T32_ILIMIT
1743 $r test -f $tmp/blimit && img_blimit=$($r cat $tmp/blimit) ||
1745 $r test -f $tmp/ilimit && img_ilimit=$($r cat $tmp/ilimit) ||
1748 echo "Upgrading from $(basename $tarball), created with:"
1749 echo " Commit: $img_commit"
1750 echo " Kernel: $img_kernel"
1751 echo " Arch: $img_arch"
1752 echo "OST version: $(lustre_build_version ost1)"
1754 # The conversion can be made only when both of the following
1755 # conditions are satisfied:
1756 # - ost device img version < 2.3.64
1757 # - ost server version >= 2.5
1758 [ $(version_code $img_commit) -ge $(version_code 2.3.64) -o \
1759 $(lustre_version_code ost1) -lt $(version_code 2.5.0) ] &&
1762 ! $r test -f $mdt2_dev || mdt2_is_available=true
1764 if [[ $fstype == zfs ]]; then
1767 local poolname_list="t32fs-mdt1 t32fs-ost1"
1769 ! $mdt2_is_available || poolname_list+=" t32fs-mdt2"
1771 for poolname in $poolname_list; do
1773 $ZPOOL list -H $poolname >/dev/null 2>&1 ||
1774 $ZPOOL import -f -d $tmp $poolname"
1777 # upgrade zpool to latest supported features, including
1778 # dnode quota accounting in 0.7.0
1779 $r "$ZPOOL upgrade -a"
1781 mdt_dev=t32fs-mdt1/mdt1
1782 ost_dev=t32fs-ost1/ost1
1783 ! $mdt2_is_available || mdt2_dev=t32fs-mdt2/mdt2
1784 wait_update_facet $SINGLEMDS "$ZPOOL list |
1785 awk '/^t32fs-mdt1/ { print \\\$1 }'" "t32fs-mdt1" || {
1786 error_noexit "import zfs pool failed"
1791 $r $LCTL set_param debug="$PTLDEBUG"
1793 $r $TUNEFS --dryrun $mdt_dev || {
1795 error_noexit "tunefs.lustre before mounting the MDT"
1799 if $mdt2_is_available; then
1800 $r $TUNEFS --dryrun $mdt2_dev || {
1802 error_noexit "tunefs.lustre before mounting the MDT"
1807 if [ "$writeconf" ]; then
1809 if [ $fstype == "ldiskfs" ]; then
1811 $r $TUNEFS --quota $mdt_dev || {
1813 error_noexit "Enable mdt quota feature"
1816 if $mdt2_is_available; then
1817 $r $TUNEFS --quota $mdt2_dev || {
1819 error_noexit "Enable mdt quota feature"
1825 if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
1826 [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
1827 { skip "LU-2200: Cannot run over Inifiniband w/o lctl replace_nids "
1828 "(Need MGS version at least 2.3.59)"; return 0; }
1830 local osthost=$(facet_active_host ost1)
1831 local ostnid=$(do_node $osthost $LCTL list_nids | head -1)
1834 if [ $fstype == "ldiskfs" ]; then
1837 $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt
1838 $r $LCTL replace_nids $fsname-OST0000 $ostnid
1839 $r $LCTL replace_nids $fsname-MDT0000 $nid
1840 $r $UMOUNT $tmp/mnt/mdt
1843 mopts=exclude=$fsname-OST0000
1844 if [ $fstype == "ldiskfs" ]; then
1849 t32_wait_til_devices_gone $node
1851 $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt || {
1853 error_noexit "Mounting the MDT"
1856 shall_cleanup_mdt=true
1858 if $mdt2_is_available; then
1859 mopts=mgsnode=$nid,$mopts
1860 $r $MOUNT_CMD -o $mopts $mdt2_dev $tmp/mnt/mdt1 || {
1862 error_noexit "Mounting the MDT"
1866 echo "mount new MDT....$mdt2_dev"
1867 $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 ||
1868 error_noexit "enable remote dir create failed"
1870 shall_cleanup_mdt1=true
1871 elif [ "$dne_upgrade" != "no" ]; then
1872 local fs2mdsdev=$(mdsdevname 1_2)
1873 local fs2mdsvdev=$(mdsvdevname 1_2)
1875 echo "mkfs new MDT on ${fs2mdsdev}...."
1876 if [ $(facet_fstype mds1) == ldiskfs ]; then
1877 mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
1880 add $SINGLEMDS $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
1881 $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
1882 error_noexit "Mkfs new MDT failed"
1886 [[ $(facet_fstype mds1) != zfs ]] || import_zpool mds1
1888 $r $TUNEFS --dryrun $fs2mdsdev || {
1889 error_noexit "tunefs.lustre before mounting the MDT"
1893 echo "mount new MDT....$fs2mdsdev"
1894 $r $MOUNT_CMD -o $mopts $fs2mdsdev $tmp/mnt/mdt1 || {
1895 error_noexit "mount mdt1 failed"
1899 $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 ||
1900 error_noexit "enable remote dir create failed"
1902 shall_cleanup_mdt1=true
1905 uuid=$($r $LCTL get_param -n mdt.$fsname-MDT0000.uuid) || {
1906 error_noexit "Getting MDT UUID"
1909 if [ "$uuid" != $fsname-MDT0000_UUID ]; then
1910 error_noexit "Unexpected MDT UUID: \"$uuid\""
1914 $r $TUNEFS --dryrun $ost_dev || {
1915 error_noexit "tunefs.lustre before mounting the OST"
1918 if [ "$writeconf" ]; then
1919 mopts=mgsnode=$nid,$writeconf
1920 if [ $fstype == "ldiskfs" ]; then
1922 $r $TUNEFS --quota $ost_dev || {
1924 error_noexit "Enable ost quota feature"
1930 if [ $fstype == "ldiskfs" ]; then
1935 $r $MOUNT_CMD -onomgs -o$mopts $ost_dev $tmp/mnt/ost || {
1936 error_noexit "Mounting the OST"
1939 shall_cleanup_ost=true
1941 uuid=$($r $LCTL get_param -n obdfilter.$fsname-OST0000.uuid) || {
1942 error_noexit "Getting OST UUID"
1945 if [ "$uuid" != $fsname-OST0000_UUID ]; then
1946 error_noexit "Unexpected OST UUID: \"$uuid\""
1950 $r $LCTL conf_param $fsname-OST0000.osc.max_dirty_mb=15 || {
1951 error_noexit "Setting \"max_dirty_mb\""
1954 $r $LCTL conf_param $fsname-OST0000.failover.node=$nid || {
1955 error_noexit "Setting OST \"failover.node\""
1958 $r $LCTL conf_param $fsname-MDT0000.mdc.max_rpcs_in_flight=9 || {
1959 error_noexit "Setting \"max_rpcs_in_flight\""
1962 $r $LCTL conf_param $fsname-MDT0000.failover.node=$nid || {
1963 error_noexit "Setting MDT \"failover.node\""
1966 $r $LCTL pool_new $fsname.interop || {
1967 error_noexit "Setting \"interop\""
1970 $r $LCTL conf_param $fsname-MDT0000.lov.stripesize=4M || {
1971 error_noexit "Setting \"lov.stripesize\""
1974 $r $LCTL conf_param $fsname-MDT0000.mdd.atime_diff=70 || {
1975 error_noexit "Setting \"mdd.atime_diff\""
1979 if [ "$ff_convert" != "no" -a $(facet_fstype ost1) == "ldiskfs" ]; then
1980 $r $LCTL lfsck_start -M $fsname-OST0000 || {
1981 error_noexit "Start OI scrub on OST0"
1985 # The oi_scrub should be on ost1, but for test_32(),
1986 # all on the SINGLEMDS.
1987 wait_update_facet $SINGLEMDS "$LCTL get_param -n \
1988 osd-ldiskfs.$fsname-OST0000.oi_scrub |
1989 awk '/^status/ { print \\\$2 }'" "completed" 30 || {
1990 error_noexit "Failed to get the expected 'completed'"
1994 local UPDATED=$($r $LCTL get_param -n \
1995 osd-ldiskfs.$fsname-OST0000.oi_scrub |
1996 awk '/^updated/ { print $2 }')
1997 [ $UPDATED -ge 1 ] || {
1998 error_noexit "Only $UPDATED objects have been converted"
2003 if [ "$dne_upgrade" != "no" ]; then
2004 $r $LCTL conf_param \
2005 $fsname-MDT0001.mdc.max_rpcs_in_flight=9 || {
2006 error_noexit "Setting MDT1 \"max_rpcs_in_flight\""
2009 $r $LCTL conf_param $fsname-MDT0001.failover.node=$nid || {
2010 error_noexit "Setting MDT1 \"failover.node\""
2013 $r $LCTL conf_param $fsname-MDT0001.lov.stripesize=4M || {
2014 error_noexit "Setting MDT1 \"lov.stripesize\""
2019 if [ "$writeconf" ]; then
2020 $MOUNT_CMD $nid:/$fsname $tmp/mnt/lustre || {
2021 error_noexit "Mounting the client"
2025 shall_cleanup_lustre=true
2026 $r $LCTL set_param debug="$PTLDEBUG"
2028 t32_verify_quota $node $fsname $tmp/mnt/lustre || {
2029 error_noexit "verify quota failed"
2033 if $r test -f $tmp/list; then
2035 # There is not a Test Framework API to copy files to or
2036 # from a remote node.
2038 # LU-2393 - do both sorts on same node to ensure locale
2040 local list_file=$tmp/list
2042 if $mdt2_is_available; then
2043 if [[ -d $tmp/mnt/lustre/striped_dir_old ]] &&
2044 $r test -f $tmp/list2; then
2045 list_file=$tmp/list2
2046 pushd $tmp/mnt/lustre/striped_dir_old
2048 pushd $tmp/mnt/lustre/remote_dir
2051 pushd $tmp/mnt/lustre
2053 $r cat $list_file | sort -k 6 >$tmp/list.orig
2054 ls -Rni --time-style=+%s | sort -k 6 |
2055 sed 's/\. / /' >$tmp/list || {
2061 # 32-bit and 64-bit clients use different algorithms to
2062 # convert FIDs into inode numbers. Hence, remove the
2063 # inode numbers from the lists, if the original list was
2064 # created on an architecture with different number of
2067 if [ $(t32_bits_per_long $(uname -m)) != \
2068 $(t32_bits_per_long $img_arch) ]; then
2069 echo "Different number of bits per \"long\"" \
2070 "from the disk image"
2071 for list in list.orig list; do
2072 sed -i -e 's/^[0-9]\+[ \t]\+//' \
2076 if ! diff -ub $tmp/list.orig $tmp/list; then
2077 error_noexit "list verification failed"
2081 echo "list verification skipped"
2084 if [ "$dne_upgrade" != "no" ]; then
2085 $LFS mkdir -i 1 -c2 $tmp/mnt/lustre/striped_dir || {
2086 error_noexit "set striped dir failed"
2090 $LFS setdirstripe -D -c2 $tmp/mnt/lustre/striped_dir
2092 pushd $tmp/mnt/lustre
2093 tar -cf - . --exclude=./striped_dir \
2094 --exclude=./striped_dir_old \
2095 --exclude=./remote_dir |
2096 tar -xvf - -C striped_dir 1>/dev/null || {
2097 error_noexit "cp to striped dir failed"
2103 # If it is upgrade from DNE (2.5), then rename the remote dir,
2104 # which is created in 2.5 to striped dir.
2105 if $mdt2_is_available && [[ "$dne_upgrade" != "no" ]]; then
2106 stripe_index=$($LFS getdirstripe -i \
2107 $tmp/mnt/lustre/remote_dir)
2109 [[ $stripe_index -eq 1 ]] || {
2110 error_noexit "get index \"$stripe_index\"" \
2111 "from remote dir failed"
2114 mv $tmp/mnt/lustre/remote_dir \
2115 $tmp/mnt/lustre/striped_dir/ || {
2116 error_noexit "mv remote dir failed"
2121 # If it is upgraded from DNE (2.7), then move the striped dir
2122 # which was created in 2.7 to the new striped dir.
2123 if $mdt2_is_available && [[ "$dne_upgrade" != "no" ]] &&
2124 [[ -d $tmp/mnt/lustre/striped_dir_old ]]; then
2125 stripe_count=$($LFS getdirstripe -c \
2126 $tmp/mnt/lustre/striped_dir_old)
2127 [[ $stripe_count -eq 2 ]] || {
2128 error_noexit "get count $stripe_count" \
2129 "from striped dir failed"
2132 mv $tmp/mnt/lustre/striped_dir_old \
2133 $tmp/mnt/lustre/striped_dir/ || {
2134 error_noexit "mv striped dir failed"
2140 $r $LCTL set_param -n osd*.*.force_sync=1
2141 dd if=/dev/zero of=$tmp/mnt/lustre/tmp_file bs=10k count=10 || {
2142 error_noexit "dd failed"
2145 rm -rf $tmp/mnt/lustre/tmp_file || {
2146 error_noexit "rm failed"
2150 if $r test -f $tmp/sha1sums; then
2151 # LU-2393 - do both sorts on same node to ensure locale
2153 $r cat $tmp/sha1sums | sort -k 2 >$tmp/sha1sums.orig
2154 if [ "$dne_upgrade" != "no" ]; then
2155 pushd $tmp/mnt/lustre/striped_dir
2157 pushd $tmp/mnt/lustre
2160 find ! -path "*remote_dir*" ! -path "*striped_dir*" \
2161 ! -name .lustre -type f -exec sha1sum {} \; |
2162 sort -k 2 >$tmp/sha1sums || {
2164 error_noexit "sha1sum"
2168 if ! diff -ub $tmp/sha1sums.orig $tmp/sha1sums; then
2169 error_noexit "sha1sum verification failed"
2173 # if upgrade from DNE(2.5), then check remote directory
2174 # if upgrade from DNE(2.7), then check striped directory
2175 if $mdt2_is_available &&
2176 [[ "$dne_upgrade" != "no" ]]; then
2177 local new_dir="$tmp/mnt/lustre/striped_dir"
2178 local striped_dir_old="$new_dir/striped_dir_old"
2180 local dir_list="$new_dir/remote_dir"
2181 [[ ! -d $triped_dir_old ]] ||
2182 dir_list+=" $striped_dir_old"
2184 for dir in $dir_list; do
2186 find ! -name .lustre -type f \
2187 -exec sha1sum {} \; |
2188 sort -k 2 >$tmp/sha1sums || {
2190 error_noexit "sha1sum"
2194 if ! diff -ub $tmp/sha1sums.orig \
2196 error_noexit "sha1sum $dir" \
2203 echo "sha1sum verification skipped"
2206 if [ "$dne_upgrade" != "no" ]; then
2207 rm -rf $tmp/mnt/lustre/striped_dir || {
2208 error_noexit "remove remote dir failed"
2213 # migrate files/dirs to remote MDT, then move them back
2214 if [ $(lustre_version_code mds1) -ge $(version_code 2.7.50) -a \
2215 $dne_upgrade != "no" ]; then
2216 $r $LCTL set_param -n \
2217 mdt.${fsname}*.enable_remote_dir=1 2>/dev/null
2219 echo "test migration"
2220 pushd $tmp/mnt/lustre
2221 for dir in $(find ! -name .lustre ! -name . -type d); do
2222 mdt_index=$($LFS getdirstripe -i $dir)
2223 stripe_cnt=$($LFS getdirstripe -c $dir)
2224 if [ $mdt_index = 0 -a $stripe_cnt -le 1 ]; then
2225 $LFS mv -M 1 $dir || {
2227 error_noexit "migrate MDT1 failed"
2233 for dir in $(find ! -name . ! -name .lustre -type d); do
2234 mdt_index=$($LFS getdirstripe -i $dir)
2235 stripe_cnt=$($LFS getdirstripe -c $dir)
2236 if [ $mdt_index = 1 -a $stripe_cnt -le 1 ]; then
2237 $LFS mv -M 0 $dir || {
2239 error_noexit "migrate MDT0 failed"
2248 # When adding new data verification tests, please check for
2249 # the presence of the required reference files first, like
2250 # the "sha1sums" and "list" tests above, to avoid the need to
2251 # regenerate every image for each test addition.
2254 nrpcs_orig=$($LCTL get_param \
2255 -n mdc.*MDT0000*.max_rpcs_in_flight) || {
2256 error_noexit "Getting \"max_rpcs_in_flight\""
2259 nrpcs=$((nrpcs_orig + 5))
2260 $r $LCTL conf_param $fsname-MDT0000.mdc.max_rpcs_in_flight=$nrpcs || {
2261 error_noexit "Changing \"max_rpcs_in_flight\""
2264 wait_update $HOSTNAME "$LCTL get_param \
2265 -n mdc.*MDT0000*.max_rpcs_in_flight" $nrpcs || {
2266 error_noexit "Verifying \"max_rpcs_in_flight\""
2270 umount $tmp/mnt/lustre || {
2271 error_noexit "Unmounting the client"
2274 shall_cleanup_lustre=false
2276 if [[ "$dne_upgrade" != "no" ]] || $mdt2_is_available; then
2277 $r $UMOUNT $tmp/mnt/mdt1 || {
2278 error_noexit "Unmounting the MDT2"
2281 shall_cleanup_mdt1=false
2284 $r $UMOUNT $tmp/mnt/mdt || {
2285 error_noexit "Unmounting the MDT"
2288 shall_cleanup_mdt=false
2290 $r $UMOUNT $tmp/mnt/ost || {
2291 error_noexit "Unmounting the OST"
2294 shall_cleanup_ost=false
2296 t32_reload_modules $node || {
2297 error_noexit "Reloading modules"
2301 if [[ $fstype == zfs ]]; then
2302 local poolname=t32fs-mdt1
2304 $ZPOOL list -H $poolname >/dev/null 2>&1 ||
2305 $ZPOOL import -f -d $tmp $poolname"
2307 # upgrade zpool to latest supported features,
2308 # including dnode quota accounting in 0.7.0
2309 $r "$ZPOOL upgrade $poolname"
2312 # mount a second time to make sure we didnt leave upgrade flag on
2313 $r $TUNEFS --dryrun $mdt_dev || {
2315 error_noexit "tunefs.lustre before remounting the MDT"
2319 mopts=exclude=$fsname-OST0000
2320 if [ $fstype == "ldiskfs" ]; then
2323 $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt || {
2324 error_noexit "Remounting the MDT"
2327 shall_cleanup_mdt=true
2337 for tarball in $tarballs; do
2338 t32_test $tarball || let "rc += $?"
2342 run_test 32a "Upgrade (not live)"
2350 for tarball in $tarballs; do
2351 t32_test $tarball writeconf || let "rc += $?"
2355 run_test 32b "Upgrade with writeconf"
2362 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
2364 for tarball in $tarballs; do
2365 # Do not support 1_8 and 2_1 direct upgrade to DNE2 anymore */
2366 echo $tarball | grep "1_8" && continue
2367 echo $tarball | grep "2_1" && continue
2369 dne_upgrade=yes t32_test $tarball writeconf || rc=$?
2373 run_test 32c "dne upgrade test"
2381 for tarball in $tarballs; do
2382 ff_convert=yes t32_test $tarball || rc=$?
2386 run_test 32d "convert ff test"
2388 test_33a() { # bug 12333, was test_33
2389 local FSNAME2=test-123
2390 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
2393 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
2395 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
2396 local dev=${SINGLEMDS}_dev
2397 local MDSDEV=${!dev}
2398 is_blkdev $SINGLEMDS $MDSDEV &&
2399 skip_env "mixed loopback and real device not working" &&
2403 local fs2mdsdev=$(mdsdevname 1_2)
2404 local fs2ostdev=$(ostdevname 1_2)
2405 local fs2mdsvdev=$(mdsvdevname 1_2)
2406 local fs2ostvdev=$(ostvdevname 1_2)
2408 if [ $(facet_fstype mds1) == ldiskfs ]; then
2409 mkfsoptions="--mkfsoptions=\\\"-J size=8\\\"" # See bug 17931.
2412 add fs2mds $(mkfs_opts mds1 ${fs2mdsdev}) --mgs --fsname=${FSNAME2} \
2413 --reformat $mkfsoptions $fs2mdsdev $fs2mdsvdev || exit 10
2414 add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --mgsnode=$MGSNID \
2415 --fsname=${FSNAME2} --index=8191 --reformat $fs2ostdev \
2416 $fs2ostvdev || exit 10
2418 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT
2419 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
2420 do_facet $SINGLEMDS "$LCTL conf_param $FSNAME2.sys.timeout=200" ||
2421 error "$LCTL conf_param $FSNAME2.sys.timeout=200 failed"
2422 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
2423 $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || error "$MOUNT_CMD failed"
2426 cp /etc/hosts $MOUNT2/ || error "copy /etc/hosts $MOUNT2/ failed"
2427 $GETSTRIPE $MOUNT2/hosts || error "$GETSTRIPE $MOUNT2/hosts failed"
2432 cleanup_nocli || error "cleanup_nocli failed with $?"
2434 run_test 33a "Mount ost with a large index number"
2436 test_33b() { # was test_34
2439 do_facet client dd if=/dev/zero of=$MOUNT/24 bs=1024k count=1
2440 # Drop lock cancelation reply during umount
2441 #define OBD_FAIL_LDLM_CANCEL_NET 0x304
2442 do_facet client $LCTL set_param fail_loc=0x80000304
2443 #lctl set_param debug=-1
2444 umount_client $MOUNT
2445 cleanup || error "cleanup failed with $?"
2447 run_test 33b "Drop cancel during umount"
2451 do_facet client "sh runmultiop_bg_pause $DIR/file O_c"
2452 manual_umount_client
2454 do_facet client killall -USR1 multiop
2455 if [ $rc -eq 0 ]; then
2456 error "umount not fail!"
2459 cleanup || error "cleanup failed with rc $?"
2461 run_test 34a "umount with opened file should be fail"
2465 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
2466 stop_mds || error "Unable to stop MDS"
2468 manual_umount_client --force || error "mtab after failed umount with $?"
2470 cleanup || error "cleanup failed with $?"
2472 run_test 34b "force umount with failed mds should be normal"
2476 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
2477 stop_ost || error "Unable to stop OST1"
2479 manual_umount_client --force || error "mtab after failed umount with $?"
2481 cleanup || error "cleanup failed with $?"
2483 run_test 34c "force umount with failed ost should be normal"
2485 test_35a() { # bug 12459
2488 DBG_SAVE="`$LCTL get_param -n debug`"
2489 $LCTL set_param debug="ha"
2491 log "Set up a fake failnode for the MDS"
2493 local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
2494 awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
2495 do_facet mgs "$LCTL conf_param \
2496 ${device}.failover.node=$(h2nettype $FAKENID)" ||
2497 error "Setting ${device}.failover.node=\
2498 $(h2nettype $FAKENID) failed."
2500 log "Wait for RECONNECT_INTERVAL seconds (10s)"
2503 MSG="conf-sanity.sh test_35a `date +%F%kh%Mm%Ss`"
2506 log "Stopping the MDT: $device"
2507 stop_mdt 1 || error "MDT0 stop fail"
2509 df $MOUNT > /dev/null 2>&1 &
2511 log "Restarting the MDT: $device"
2512 start_mdt 1 || error "MDT0 start fail"
2513 log "Wait for df ($DFPID) ... "
2516 $LCTL set_param debug="$DBG_SAVE"
2518 # retrieve from the log the first server that the client tried to
2519 # contact after the connection loss
2520 $LCTL dk $TMP/lustre-log-$TESTNAME.log
2521 NEXTCONN=`awk "/${MSG}/ {start = 1;}
2522 /import_select_connection.*$device-mdc.* using connection/ {
2524 if (\\\$NF ~ /$FAKENID/)
2530 }" $TMP/lustre-log-$TESTNAME.log`
2531 [ "$NEXTCONN" != "0" ] &&
2532 error "Tried to connect to ${NEXTCONN} not last active server"
2533 cleanup || error "cleanup failed with $?"
2534 # remove nid settings
2535 writeconf_or_reformat
2537 run_test 35a "Reconnect to the last active server first"
2539 test_35b() { # bug 18674
2540 remote_mds || { skip "local MDS" && return 0; }
2544 $LCTL set_param debug="ha"
2546 MSG="conf-sanity.sh test_35b `date +%F%kh%Mm%Ss`"
2549 log "Set up a fake failnode for the MDS"
2551 local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
2552 awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
2553 do_facet mgs "$LCTL conf_param \
2554 ${device}.failover.node=$(h2nettype $FAKENID)" ||
2555 error "Set ${device}.failover.node=\
2556 $(h2nettype $FAKENID) failed"
2558 local at_max_saved=0
2559 # adaptive timeouts may prevent seeing the issue
2560 if at_is_enabled; then
2561 at_max_saved=$(at_max_get mds)
2562 at_max_set 0 mds client
2565 mkdir $MOUNT/$tdir || error "mkdir $MOUNT/$tdir failed"
2567 log "Injecting EBUSY on MDS"
2568 # Setting OBD_FAIL_MDS_RESEND=0x136
2569 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000136" ||
2570 error "unable to set param fail_loc=0x80000136"
2572 $LCTL set_param mdc.${FSNAME}*.stats=clear
2574 log "Creating a test file and stat it"
2575 touch $MOUNT/$tdir/$tfile || error "touch $MOUNT/$tdir/$tfile failed"
2576 stat $MOUNT/$tdir/$tfile
2578 log "Stop injecting EBUSY on MDS"
2579 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0" ||
2580 error "unable to set param fail_loc=0"
2581 rm -f $MOUNT/$tdir/$tfile || error "remove $MOUNT/$tdir/$tfile failed"
2584 # restore adaptive timeout
2585 [ $at_max_saved -ne 0 ] && at_max_set $at_max_saved mds client
2587 $LCTL dk $TMP/lustre-log-$TESTNAME.log
2589 CONNCNT=$($LCTL get_param mdc.${FSNAME}*.stats |
2590 awk '/mds_connect/{print $2}')
2592 # retrieve from the log if the client has ever tried to
2593 # contact the fake server after the loss of connection
2594 FAILCONN=`awk "BEGIN {ret = 0;}
2595 /import_select_connection.*${FSNAME}-MDT0000-mdc.* using connection/ {
2597 if (\\\$NF ~ /$FAKENID/) {
2602 END {print ret}" $TMP/lustre-log-$TESTNAME.log`
2604 [ "$FAILCONN" == "0" ] &&
2605 error "The client reconnection has not been triggered"
2606 [ "$FAILCONN" == "2" ] &&
2607 error "Primary server busy, client reconnect to failover failed"
2610 # When OBD_FAIL_MDS_RESEND is hit, we sleep for 2 * obd_timeout
2611 # Reconnects are supposed to be rate limited to one every 5s
2612 [ $CONNCNT -gt $((2 * $TIMEOUT / 5 + 1)) ] &&
2613 error "Too many reconnects $CONNCNT"
2615 cleanup || error "cleanup failed with $?"
2616 # remove nid settings
2617 writeconf_or_reformat
2619 run_test 35b "Continue reconnection retries, if the active server is busy"
2622 [ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs" && return
2624 [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] ||
2625 { skip "remote OST" && return 0; }
2628 local FSNAME2=test1234
2629 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
2631 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
2633 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
2634 is_blkdev $SINGLEMDS $MDSDEV &&
2635 skip_env "mixed loopback and real device not working" && return
2638 local fs2mdsdev=$(mdsdevname 1_2)
2639 local fs2ostdev=$(ostdevname 1_2)
2640 local fs3ostdev=$(ostdevname 2_2)
2641 local fs2mdsvdev=$(mdsvdevname 1_2)
2642 local fs2ostvdev=$(ostvdevname 1_2)
2643 local fs3ostvdev=$(ostvdevname 2_2)
2645 add fs2mds $(mkfs_opts mds1 ${fs2mdsdev}) --mgs --fsname=${FSNAME2} \
2646 --reformat $fs2mdsdev $fs2mdsvdev || exit 10
2647 # XXX after we support non 4K disk blocksize in ldiskfs, specify a
2648 # different one than the default value here.
2649 add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --mgsnode=$MGSNID \
2650 --fsname=${FSNAME2} --reformat $fs2ostdev $fs2ostvdev || exit 10
2651 add fs3ost $(mkfs_opts ost2 ${fs3ostdev}) --mgsnode=$MGSNID \
2652 --fsname=${FSNAME2} --reformat $fs3ostdev $fs3ostvdev || exit 10
2654 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
2655 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
2656 start fs3ost $fs3ostdev $OST_MOUNT_OPTS
2657 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
2658 $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || error "$MOUNT_CMD failed"
2660 sleep 5 # until 11778 fixed
2662 dd if=/dev/zero of=$MOUNT2/$tfile bs=1M count=7 || error "dd failed"
2664 BKTOTAL=$($LCTL get_param -n obdfilter.*.kbytestotal |
2665 awk 'BEGIN{total=0}; {total+=$1}; END{print total}')
2666 BKFREE=$($LCTL get_param -n obdfilter.*.kbytesfree |
2667 awk 'BEGIN{free=0}; {free+=$1}; END{print free}')
2668 BKAVAIL=$($LCTL get_param -n obdfilter.*.kbytesavail |
2669 awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}')
2670 STRING=$(df -P $MOUNT2 | tail -n 1 | awk '{print $2","$3","$4}')
2671 DFTOTAL=$(echo $STRING | cut -d, -f1)
2672 DFUSED=$(echo $STRING | cut -d, -f2)
2673 DFAVAIL=$(echo $STRING | cut -d, -f3)
2674 DFFREE=$(($DFTOTAL - $DFUSED))
2676 ALLOWANCE=$((64 * $OSTCOUNT))
2678 if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
2679 [ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
2680 echo "**** FAIL: df total($DFTOTAL) mismatch OST total($BKTOTAL)"
2683 if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
2684 [ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
2685 echo "**** FAIL: df free($DFFREE) mismatch OST free($BKFREE)"
2688 if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
2689 [ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
2690 echo "**** FAIL: df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
2695 stop fs3ost -f || error "unable to stop OST3"
2696 stop fs2ost -f || error "unable to stop OST2"
2697 stop fs2mds -f || error "unable to stop second MDS"
2698 unload_modules_conf || error "unable unload modules"
2701 run_test 36 "df report consistency on OSTs with different block size"
2704 local mntpt=$(facet_mntpt $SINGLEMDS)
2705 local mdsdev=$(mdsdevname ${SINGLEMDS//mds/})
2706 local mdsdev_sym="$TMP/sym_mdt.img"
2707 local opts=$MDS_MOUNT_OPTS
2710 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
2711 skip "ldiskfs only test"
2715 echo "MDS : $mdsdev"
2716 echo "SYMLINK : $mdsdev_sym"
2717 do_facet $SINGLEMDS rm -f $mdsdev_sym
2719 do_facet $SINGLEMDS ln -s $mdsdev $mdsdev_sym
2721 echo "mount symlink device - $mdsdev_sym"
2723 if ! do_facet $SINGLEMDS test -b $mdsdev; then
2724 opts=$(csa_add "$opts" -o loop)
2726 mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $opts \
2727 $mdsdev_sym $mntpt 2>&1)
2730 echo mount_op=$mount_op
2732 do_facet $SINGLEMDS "$UMOUNT $mntpt && rm -f $mdsdev_sym"
2734 if $(echo $mount_op | grep -q "unable to set tunable"); then
2735 error "set tunables failed for symlink device"
2738 [ $rc -eq 0 ] || error "mount symlink $mdsdev_sym failed! rc=$rc"
2740 run_test 37 "verify set tunables works for symlink device"
2742 test_38() { # bug 14222
2743 local fstype=$(facet_fstype $SINGLEMDS)
2744 local mntpt=$(facet_mntpt $SINGLEMDS)
2749 local SRC="/etc /bin"
2750 local FILES=$(find $SRC -type f -mtime +1 | head -n $COUNT)
2751 log "copying $(echo $FILES | wc -w) files to $DIR/$tdir"
2752 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
2753 tar cf - $FILES | tar xf - -C $DIR/$tdir ||
2754 error "copying $SRC to $DIR/$tdir"
2756 umount_client $MOUNT || error "umount_client $MOUNT failed"
2757 do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
2758 stop_mds || error "Unable to stop MDS"
2759 log "delete lov_objid file on MDS"
2761 mount_fstype $SINGLEMDS || error "mount MDS failed (1)"
2763 do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid; rm $mntpt/lov_objid"
2765 unmount_fstype $SINGLEMDS || error "umount failed (1)"
2767 # check create in mds_lov_connect
2768 start_mds || error "unable to start MDS"
2769 mount_client $MOUNT || error "mount_client $MOUNT failed"
2771 [ $V ] && log "verifying $DIR/$tdir/$f"
2772 diff -q $f $DIR/$tdir/$f || ERROR=y
2774 do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
2775 if [ "$ERROR" = "y" ]; then
2776 # check it's updates in sync
2777 umount_client $MOUNT
2779 mount_fstype $SIGNLEMDS
2780 do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
2781 unmount_fstype $SINGLEMDS
2782 error "old and new files are different after connect" || true
2784 touch $DIR/$tdir/f2 || error "f2 file create failed"
2786 # check it's updates in sync
2787 umount_client $MOUNT || error "second umount_client $MOUNT failed"
2790 mount_fstype $SINGLEMDS || error "mount MDS failed (3)"
2792 do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
2793 do_facet $SINGLEMDS dd if=/dev/zero of=$mntpt/lov_objid.clear count=8
2795 unmount_fstype $SINGLEMDS || error "umount failed (3)"
2797 start_mds || error "unable to start MDS"
2798 mount_client $MOUNT || error "mount_client $MOUNT failed"
2800 [ $V ] && log "verifying $DIR/$tdir/$f"
2801 diff -q $f $DIR/$tdir/$f || ERROR=y
2803 touch $DIR/$tdir/f3 || error "f3 file create failed"
2804 do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
2805 umount_client $MOUNT || error "third umount_client $MOUNT failed"
2807 mount_fstype $SINGLEMDS || error "mount MDS failed (4)"
2808 do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
2809 unmount_fstype $SINGLEMDS || error "umount failed (4)"
2811 [ "$ERROR" = "y" ] &&
2812 error "old and new files are different after sync" || true
2814 log "files compared the same"
2815 cleanup || error "cleanup failed with $?"
2817 run_test 38 "MDS recreates missing lov_objid file from OST data"
2822 cleanup || error "cleanup failed with $?"
2823 perl $SRCDIR/leak_finder.pl $TMP/debug 2>&1 | egrep '*** Leak:' &&
2824 error "memory leak detected" || true
2826 run_test 39 "leak_finder recognizes both LUSTRE and LNET malloc messages"
2828 test_40() { # bug 15759
2829 start_ost || error "Unable to start OST1"
2830 #define OBD_FAIL_TGT_TOOMANY_THREADS 0x706
2831 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000706"
2833 cleanup || error "cleanup failed with rc $?"
2835 run_test 40 "race during service thread startup"
2837 test_41a() { #bug 14134
2838 if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
2839 ! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
2840 skip "Loop devices does not work with nosvc option"
2845 { skip "needs combined MGT and MDT device" && return 0; }
2847 start_mdt 1 -o nosvc -n
2848 if [ $MDSCOUNT -ge 2 ]; then
2849 for num in $(seq 2 $MDSCOUNT); do
2850 start_mdt $num || return
2853 start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
2854 start_mdt 1 -o nomgs,force
2855 mount_client $MOUNT || error "mount_client $MOUNT failed"
2858 echo "blah blah" > $MOUNT/$tfile
2861 umount_client $MOUNT || error "umount_client $MOUNT failed"
2862 stop ost1 -f || error "unable to stop OST1"
2863 stop_mds || error "Unable to stop MDS"
2864 stop_mds || error "Unable to stop MDS on second try"
2866 run_test 41a "mount mds with --nosvc and --nomgs"
2869 if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
2870 ! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
2871 skip "Loop devices does not work with nosvc option"
2875 ! combined_mgs_mds && skip "needs combined mgs device" && return 0
2879 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
2881 start_mdt 1 -o nosvc -n
2882 if [ $MDSCOUNT -ge 2 ]; then
2883 for num in $(seq 2 $MDSCOUNT); do
2884 start_mdt $num || return
2887 start_ost || error "Unable to start OST1"
2888 start_mdt 1 -o nomgs,force
2889 mount_client $MOUNT || error "mount_client $MOUNT failed"
2892 echo "blah blah" > $MOUNT/$tfile
2893 cat $MOUNT/$tfile || error "cat $MOUNT/$tfile failed"
2895 umount_client $MOUNT -f || error "umount_client $MOUNT failed"
2896 stop_ost || error "Unable to stop OST1"
2897 stop_mds || error "Unable to stop MDS"
2898 stop_mds || error "Unable to stop MDS on second try"
2900 run_test 41b "mount mds with --nosvc and --nomgs on first mount"
2903 local server_version=$(lustre_version_code $SINGLEMDS)
2904 local oss_list=$(comma_list $(osts_nodes))
2906 [[ $server_version -ge $(version_code 2.6.52) ]] ||
2907 [[ $server_version -ge $(version_code 2.5.26) &&
2908 $server_version -lt $(version_code 2.5.50) ]] ||
2909 [[ $server_version -ge $(version_code 2.5.4) &&
2910 $server_version -lt $(version_code 2.5.11) ]] ||
2911 { skip "Need MDS version 2.5.4+ or 2.5.26+ or 2.6.52+"; return; }
2913 # ensure mds1 ost1 have been created even if running sub-test standalone
2916 cleanup || error "cleanup failed"
2918 # using directly mount command instead of start() function to avoid
2919 # any side effect of // with others/externals tools/features
2920 # ("zpool import", ...)
2922 # MDT concurrent start
2924 LOAD_MODULES_REMOTE=true load_modules
2925 do_facet $SINGLEMDS "lsmod | grep -q libcfs" ||
2926 error "MDT concurrent start: libcfs module not loaded"
2928 local mds1dev=$(mdsdevname 1)
2929 local mds1mnt=$(facet_mntpt mds1)
2930 local mds1fstype=$(facet_fstype mds1)
2931 local mds1opts=$MDS_MOUNT_OPTS
2933 if [ $mds1fstype == ldiskfs ] &&
2934 ! do_facet mds1 test -b $mds1dev; then
2935 mds1opts=$(csa_add "$mds1opts" -o loop)
2937 if [[ $mds1fstype == zfs ]]; then
2938 import_zpool mds1 || return ${PIPESTATUS[0]}
2941 #define OBD_FAIL_TGT_MOUNT_RACE 0x716
2942 do_facet mds1 "$LCTL set_param fail_loc=0x80000716"
2944 do_facet mds1 mount -t lustre $mds1dev $mds1mnt $mds1opts &
2947 do_facet mds1 mount -t lustre $mds1dev $mds1mnt $mds1opts
2951 do_facet mds1 "$LCTL set_param fail_loc=0x0"
2952 if [ $rc -eq 0 ] && [ $rc2 -ne 0 ]; then
2953 echo "1st MDT start succeed"
2954 echo "2nd MDT start failed with $rc2"
2955 elif [ $rc2 -eq 0 ] && [ $rc -ne 0 ]; then
2956 echo "1st MDT start failed with $rc"
2957 echo "2nd MDT start succeed"
2960 error "unexpected concurrent MDT mounts result, rc=$rc rc2=$rc2"
2963 if [ $MDSCOUNT -ge 2 ]; then
2964 for num in $(seq 2 $MDSCOUNT); do
2965 start_mdt $num || return
2969 # OST concurrent start
2971 do_rpc_nodes $oss_list "lsmod | grep -q libcfs" ||
2972 error "OST concurrent start: libcfs module not loaded"
2974 local ost1dev=$(ostdevname 1)
2975 local ost1mnt=$(facet_mntpt ost1)
2976 local ost1fstype=$(facet_fstype ost1)
2977 local ost1opts=$OST_MOUNT_OPTS
2979 if [ $ost1fstype == ldiskfs ] &&
2980 ! do_facet ost1 test -b $ost1dev; then
2981 ost1opts=$(csa_add "$ost1opts" -o loop)
2983 if [[ $ost1fstype == zfs ]]; then
2984 import_zpool ost1 || return ${PIPESTATUS[0]}
2987 #define OBD_FAIL_TGT_MOUNT_RACE 0x716
2988 do_facet ost1 "$LCTL set_param fail_loc=0x80000716"
2990 do_facet ost1 mount -t lustre $ost1dev $ost1mnt $ost1opts &
2993 do_facet ost1 mount -t lustre $ost1dev $ost1mnt $ost1opts
2997 do_facet ost1 "$LCTL set_param fail_loc=0x0"
2998 if [ $rc -eq 0 ] && [ $rc2 -ne 0 ]; then
2999 echo "1st OST start succeed"
3000 echo "2nd OST start failed with $rc2"
3001 elif [ $rc2 -eq 0 ] && [ $rc -ne 0 ]; then
3002 echo "1st OST start failed with $rc"
3003 echo "2nd OST start succeed"
3007 error "unexpected concurrent OST mounts result, rc=$rc rc2=$rc2"
3013 # verify everything ok
3018 error "MDT(s) start failed"
3026 error "OST(s) start failed"
3034 error "client start failed"
3041 error "client mount failed"
3045 run_test 41c "concurrent mounts of MDT/OST should all fail but one"
3047 test_42() { #bug 14693
3049 check_mount || error "client was not mounted"
3051 do_facet mgs $LCTL conf_param $FSNAME.llite.some_wrong_param=10
3052 umount_client $MOUNT ||
3053 error "unmounting client failed with invalid llite param"
3054 mount_client $MOUNT ||
3055 error "mounting client failed with invalid llite param"
3057 do_facet mgs $LCTL conf_param $FSNAME.sys.some_wrong_param=20
3058 cleanup || error "stopping $FSNAME failed with invalid sys param"
3060 check_mount || error "client was not mounted with invalid sys param"
3061 cleanup || error "stopping $FSNAME failed with invalid sys param"
3063 run_test 42 "allow client/server mount/unmount with invalid config param"
3066 [[ $(lustre_version_code mgs) -ge $(version_code 2.5.58) ]] ||
3067 { skip "Need MDS version at least 2.5.58" && return 0; }
3068 [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
3071 USER1=$(getent passwd | grep :$ID1:$ID1: | cut -d: -f1)
3072 [ -z "$USER1" ] && skip_env "missing user with uid=$ID1 gid=$ID1" &&
3076 chmod ugo+x $DIR || error "chmod 0 failed"
3077 set_conf_param_and_check mds1 \
3078 "$LCTL get_param -n mdt.$FSNAME-MDT0000.root_squash" \
3079 "$FSNAME.mdt.root_squash" \
3081 wait_update $HOSTNAME \
3082 "$LCTL get_param -n llite.${FSNAME}*.root_squash" \
3084 error "check llite root_squash failed!"
3085 set_conf_param_and_check mds1 \
3086 "$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
3087 "$FSNAME.mdt.nosquash_nids" \
3089 wait_update $HOSTNAME \
3090 "$LCTL get_param -n llite.${FSNAME}*.nosquash_nids" \
3092 error "check llite nosquash_nids failed!"
3095 # create set of test files
3097 echo "111" > $DIR/$tfile-userfile || error "write 1 failed"
3098 chmod go-rw $DIR/$tfile-userfile || error "chmod 1 failed"
3099 chown $RUNAS_ID.$RUNAS_ID $DIR/$tfile-userfile || error "chown failed"
3101 echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
3102 chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
3104 mkdir $DIR/$tdir-rootdir || error "mkdir failed"
3105 chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
3106 touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
3108 echo "777" > $DIR/$tfile-user1file || error "write 7 failed"
3109 chmod go-rw $DIR/$tfile-user1file || error "chmod 7 failed"
3110 chown $ID1.$ID1 $DIR/$tfile-user1file || error "chown failed"
3113 # check root_squash:
3114 # set root squash UID:GID to RUNAS_ID
3115 # root should be able to access only files owned by RUNAS_ID
3117 set_conf_param_and_check mds1 \
3118 "$LCTL get_param -n mdt.$FSNAME-MDT0000.root_squash" \
3119 "$FSNAME.mdt.root_squash" \
3120 "$RUNAS_ID:$RUNAS_ID"
3121 wait_update $HOSTNAME \
3122 "$LCTL get_param -n llite.${FSNAME}*.root_squash" \
3123 "$RUNAS_ID:$RUNAS_ID" ||
3124 error "check llite root_squash failed!"
3126 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-userfile)
3127 dd if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null ||
3128 error "$ST: root read permission is denied"
3129 echo "$ST: root read permission is granted - ok"
3132 dd conv=notrunc of=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null ||
3133 error "$ST: root write permission is denied"
3134 echo "$ST: root write permission is granted - ok"
3136 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
3137 dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null &&
3138 error "$ST: root read permission is granted"
3139 echo "$ST: root read permission is denied - ok"
3142 dd conv=notrunc of=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null &&
3143 error "$ST: root write permission is granted"
3144 echo "$ST: root write permission is denied - ok"
3146 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tdir-rootdir)
3147 rm $DIR/$tdir-rootdir/tfile-1 1>/dev/null 2>/dev/null &&
3148 error "$ST: root unlink permission is granted"
3149 echo "$ST: root unlink permission is denied - ok"
3151 touch $DIR/tdir-rootdir/tfile-2 1>/dev/null 2>/dev/null &&
3152 error "$ST: root create permission is granted"
3153 echo "$ST: root create permission is denied - ok"
3156 # check root_squash is enforced independently
3157 # of client cache content
3159 # access file by USER1, keep access open
3160 # root should be denied access to user file
3162 runas -u $ID1 tail -f $DIR/$tfile-user1file 1>/dev/null 2>&1 &
3166 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-user1file)
3167 dd if=$DIR/$tfile-user1file 1>/dev/null 2>&1 &&
3168 { kill $pid; error "$ST: root read permission is granted"; }
3169 echo "$ST: root read permission is denied - ok"
3172 dd conv=notrunc of=$DIR/$tfile-user1file 1>/dev/null 2>&1 &&
3173 { kill $pid; error "$ST: root write permission is granted"; }
3174 echo "$ST: root write permission is denied - ok"
3180 # check nosquash_nids:
3181 # put client's NID into nosquash_nids list,
3182 # root should be able to access root file after that
3184 local NIDLIST=$($LCTL list_nids all | tr '\n' ' ')
3185 NIDLIST="2@gni $NIDLIST 192.168.0.[2,10]@tcp"
3186 NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
3187 set_conf_param_and_check mds1 \
3188 "$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
3189 "$FSNAME-MDTall.mdt.nosquash_nids" \
3191 wait_update $HOSTNAME \
3192 "$LCTL get_param -n llite.${FSNAME}*.nosquash_nids" \
3194 error "check llite nosquash_nids failed!"
3196 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
3197 dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null ||
3198 error "$ST: root read permission is denied"
3199 echo "$ST: root read permission is granted - ok"
3202 dd conv=notrunc of=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null ||
3203 error "$ST: root write permission is denied"
3204 echo "$ST: root write permission is granted - ok"
3206 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tdir-rootdir)
3207 rm $DIR/$tdir-rootdir/tfile-1 ||
3208 error "$ST: root unlink permission is denied"
3209 echo "$ST: root unlink permission is granted - ok"
3210 touch $DIR/$tdir-rootdir/tfile-2 ||
3211 error "$ST: root create permission is denied"
3212 echo "$ST: root create permission is granted - ok"
3213 cleanup || error "cleanup failed with $?"
3215 run_test 43a "check root_squash and nosquash_nids"
3217 test_43b() { # LU-5690
3218 [[ $(lustre_version_code mgs) -ge $(version_code 2.7.62) ]] ||
3219 { skip "Need MGS version 2.7.62+"; return; }
3221 if [[ -z "$fs2mds_DEV" ]]; then
3222 is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
3223 skip_env "mixed loopback and real device not working" && return
3226 local fs2mdsdev=$(mdsdevname 1_2)
3227 local fs2mdsvdev=$(mdsvdevname 1_2)
3229 # temporarily use fs2mds as fs2mgs
3231 local fs2mgsdev=$fs2mdsdev
3232 local fs2mgsvdev=$fs2mdsvdev
3234 local fsname=test1234
3236 load_module llite/lustre
3237 local client_ip=$(host_nids_address $HOSTNAME $NETTYPE)
3238 local host=${client_ip//*./}
3239 local net=${client_ip/%$host/}
3240 local nosquash_nids=$(h2nettype $net[$host,$host,$host])
3242 add $fs2mgs $(mkfs_opts mgs $fs2mgsdev) --fsname=$fsname \
3243 --param mdt.root_squash=$RUNAS_ID:$RUNAS_ID \
3244 --param mdt.nosquash_nids=$nosquash_nids \
3245 --reformat $fs2mgsdev $fs2mgsvdev || error "add fs2mgs failed"
3246 start $fs2mgs $fs2mgsdev $MGS_MOUNT_OPTS || error "start fs2mgs failed"
3247 stop $fs2mgs -f || error "stop fs2mgs failed"
3249 run_test 43b "parse nosquash_nids with commas in expr_list"
3251 umount_client $MOUNT
3256 check_mount || error "check_mount"
3257 UUID=$($LCTL get_param llite.${FSNAME}*.uuid | cut -d= -f2)
3259 UUIDS=$(do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.*.uuid")
3260 for VAL in $UUIDS; do
3261 NID=$(echo $VAL | cut -d= -f1)
3262 CLUUID=$(echo $VAL | cut -d= -f2)
3263 [ "$UUID" = "$CLUUID" ] && STATS_FOUND=yes && break
3265 [ "$STATS_FOUND" = "no" ] && error "stats not found for client"
3266 cleanup || error "cleanup failed with $?"
3268 run_test 44 "mounted client proc entry exists"
3272 check_mount || error "check_mount"
3273 stop_mds || error "Unable to stop MDS"
3277 #define OBD_FAIL_PTLRPC_LONG_REPL_UNLINK 0x50f
3278 do_facet client "$LCTL set_param fail_loc=0x8000050f"
3281 manual_umount_client --force || error "manual_umount_client failed"
3282 do_facet client "$LCTL set_param fail_loc=0x0"
3283 start_mds || error "unable to start MDS"
3284 mount_client $MOUNT || error "mount_client $MOUNT failed"
3285 cleanup || error "cleanup failed with $?"
3287 run_test 45 "long unlink handling in ptlrpcd"
3294 umount_client $MOUNT2 || rc=$?
3295 umount_client $MOUNT || rc=$?
3296 while [ $count -gt 0 ]; do
3297 stop ost${count} -f || rc=$?
3301 cleanup_nocli || rc=$?
3302 #writeconf to remove all ost2 traces for subsequent tests
3303 writeconf_or_reformat
3308 echo "Testing with $OSTCOUNT OSTs"
3310 start_mds || error "unable to start MDS"
3311 #first client should see only one ost
3312 start_ost || error "Unable to start OST1"
3313 wait_osc_import_state mds ost FULL
3315 mount_client $MOUNT || error "mount_client $MOUNT failed"
3316 trap "cleanup_46a $OSTCOUNT" EXIT ERR
3319 for (( i=2; i<=$OSTCOUNT; i++ )); do
3320 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS ||
3321 error "start_ost$i $(ostdevname $i) failed"
3324 # wait until osts in sync
3325 for (( i=2; i<=$OSTCOUNT; i++ )); do
3326 wait_osc_import_state mds ost$i FULL
3327 wait_osc_import_state client ost$i FULL
3330 #second client see all ost's
3332 mount_client $MOUNT2 || error "mount_client failed"
3333 $SETSTRIPE -c -1 $MOUNT2 || error "$SETSTRIPE -c -1 $MOUNT2 failed"
3334 $GETSTRIPE $MOUNT2 || error "$GETSTRIPE $MOUNT2 failed"
3336 echo "ok" > $MOUNT2/widestripe
3337 $GETSTRIPE $MOUNT2/widestripe ||
3338 error "$GETSTRIPE $MOUNT2/widestripe failed"
3339 # fill acl buffer for avoid expand lsm to them
3340 awk -F : '{if (FNR < 25) { print "u:"$1":rwx" }}' /etc/passwd |
3342 setfacl -m $acl $MOUNT2/widestripe
3346 stat $MOUNT/widestripe || error "stat $MOUNT/widestripe failed"
3348 cleanup_46a $OSTCOUNT || error "cleanup_46a failed"
3350 run_test 46a "handle ost additional - wide striped file"
3355 check_mount || error "check_mount failed"
3356 $LCTL set_param ldlm.namespaces.$FSNAME-*-*-*.lru_size=100
3360 for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
3361 if echo $ns | grep "MDT[[:digit:]]*"; then
3364 lrs=$(echo $ns | sed 's/.*lru_size=//')
3365 lru_size[count]=$lrs
3370 facet_failover $SINGLEMDS
3371 client_up || error "client_up failed"
3374 for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
3375 if echo $ns | grep "MDT[[:digit:]]*"; then
3378 lrs=$(echo $ns | sed 's/.*lru_size=//')
3379 if ! test "$lrs" -eq "${lru_size[count]}"; then
3380 n=$(echo $ns | sed -e 's/ldlm.namespaces.//' -e 's/.lru_size=.*//')
3381 error "$n has lost lru_size: $lrs vs. ${lru_size[count]}"
3386 cleanup || error "cleanup failed with $?"
3388 run_test 47 "server restart does not make client loss lru_resize settings"
3393 # reformat after this test is needed - if the test fails,
3394 # we will have unkillable file at FS
3398 test_48() { # bz-17636 LU-7473
3402 check_mount || error "check_mount failed"
3404 $SETSTRIPE -c -1 $MOUNT || error "$SETSTRIPE -c -1 $MOUNT failed"
3405 $GETSTRIPE $MOUNT || error "$GETSTRIPE $MOUNT failed"
3407 echo "ok" > $MOUNT/widestripe
3408 $GETSTRIPE $MOUNT/widestripe ||
3409 error "$GETSTRIPE $MOUNT/widestripe failed"
3411 # In the future, we may introduce more EAs, such as selinux, enlarged
3412 # LOV EA, and so on. These EA will use some EA space that is shared by
3413 # ACL entries. So here we only check some reasonable ACL entries count,
3414 # instead of the max number that is calculated from the max_ea_size.
3415 if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.57) ];
3417 count=28 # hard coded of RPC protocol
3418 elif [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3419 count=4000 # max_num 4091 max_ea_size = 32768
3420 elif ! large_xattr_enabled; then
3421 count=450 # max_num 497 max_ea_size = 4012
3423 count=4500 # max_num 8187 max_ea_size = 1048492
3424 # not create too much (>5000) to save test time
3427 echo "It is expected to hold at least $count ACL entries"
3428 trap cleanup_48 EXIT ERR
3429 for ((i = 0; i < $count; i++)) do
3430 setfacl -m u:$((i + 100)):rw $MOUNT/widestripe ||
3431 error "Fail to setfacl for $MOUNT/widestripe at $i"
3434 cancel_lru_locks mdc
3435 stat $MOUNT/widestripe || error "stat $MOUNT/widestripe failed"
3436 local r_count=$(getfacl $MOUNT/widestripe | grep "user:" | wc -l)
3437 count=$((count + 1)) # for the entry "user::rw-"
3439 [ $count -eq $r_count ] ||
3440 error "Expected ACL entries $count, but got $r_count"
3444 run_test 48 "too many acls on file"
3446 # check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE
3447 test_49a() { # bug 17710
3448 local timeout_orig=$TIMEOUT
3449 local ldlm_timeout_orig=$LDLM_TIMEOUT
3450 local LOCAL_TIMEOUT=20
3452 LDLM_TIMEOUT=$LOCAL_TIMEOUT
3453 TIMEOUT=$LOCAL_TIMEOUT
3457 check_mount || error "client mount failed"
3459 echo "check ldlm_timout..."
3460 local LDLM_MDS="$(do_facet $SINGLEMDS $LCTL get_param -n ldlm_timeout)"
3461 local LDLM_OST1="$(do_facet ost1 $LCTL get_param -n ldlm_timeout)"
3462 local LDLM_CLIENT="$(do_facet client $LCTL get_param -n ldlm_timeout)"
3464 if [ $LDLM_MDS -ne $LDLM_OST1 -o $LDLM_MDS -ne $LDLM_CLIENT ]; then
3465 error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
3468 if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT / 3)) ]; then
3469 error "LDLM_TIMEOUT($LDLM_MDS) is not $((LOCAL_TIMEOUT / 3))"
3472 umount_client $MOUNT || error "umount_client $MOUNT failed"
3473 stop_ost || error "problem stopping OSS"
3474 stop_mds || error "problem stopping MDS"
3476 LDLM_TIMEOUT=$ldlm_timeout_orig
3477 TIMEOUT=$timeout_orig
3479 run_test 49a "check PARAM_SYS_LDLM_TIMEOUT option of mkfs.lustre"
3481 test_49b() { # bug 17710
3482 local timeout_orig=$TIMEOUT
3483 local ldlm_timeout_orig=$LDLM_TIMEOUT
3484 local LOCAL_TIMEOUT=20
3486 LDLM_TIMEOUT=$((LOCAL_TIMEOUT - 1))
3487 TIMEOUT=$LOCAL_TIMEOUT
3491 check_mount || error "client mount failed"
3493 local LDLM_MDS="$(do_facet $SINGLEMDS $LCTL get_param -n ldlm_timeout)"
3494 local LDLM_OST1="$(do_facet ost1 $LCTL get_param -n ldlm_timeout)"
3495 local LDLM_CLIENT="$(do_facet client $LCTL get_param -n ldlm_timeout)"
3497 if [ $LDLM_MDS -ne $LDLM_OST1 -o $LDLM_MDS -ne $LDLM_CLIENT ]; then
3498 error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
3501 if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT - 1)) ]; then
3502 error "LDLM_TIMEOUT($LDLM_MDS) is not $((LOCAL_TIMEOUT - 1))"
3505 cleanup || error "cleanup failed"
3507 LDLM_TIMEOUT=$ldlm_timeout_orig
3508 TIMEOUT=$timeout_orig
3510 run_test 49b "check PARAM_SYS_LDLM_TIMEOUT option of mkfs.lustre"
3513 # Test both statfs and lfs df and fail if either one fails
3514 multiop_bg_pause $1 f_
3517 killall -USR1 multiop
3518 [ $RC1 -ne 0 ] && log "lazystatfs multiop failed"
3519 wait $PID || { RC1=$?; log "multiop return error "; }
3526 if [ $RC2 -eq 0 ]; then
3528 log "lazystatfs df failed"
3532 [[ $RC1 -ne 0 || $RC2 -eq 0 ]] && RC=1
3538 $LCTL set_param llite.$FSNAME-*.lazystatfs=1
3539 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
3541 lazystatfs $MOUNT || error "lazystatfs failed but no down servers"
3543 cleanup || error "cleanup failed with rc $?"
3545 run_test 50a "lazystatfs all servers available"
3549 $LCTL set_param llite.$FSNAME-*.lazystatfs=1
3550 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
3552 # Wait for client to detect down OST
3553 stop_ost || error "Unable to stop OST1"
3554 wait_osc_import_state mds ost DISCONN
3556 lazystatfs $MOUNT || error "lazystatfs should not return EIO"
3558 umount_client $MOUNT || error "Unable to unmount client"
3559 stop_mds || error "Unable to stop MDS"
3561 run_test 50b "lazystatfs all servers down"
3564 start_mds || error "Unable to start MDS"
3565 start_ost || error "Unable to start OST1"
3566 start_ost2 || error "Unable to start OST2"
3567 mount_client $MOUNT || error "Unable to mount client"
3568 $LCTL set_param llite.$FSNAME-*.lazystatfs=1
3569 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
3571 # Wait for client to detect down OST
3572 stop_ost || error "Unable to stop OST1"
3573 wait_osc_import_state mds ost DISCONN
3574 lazystatfs $MOUNT || error "lazystatfs failed with one down server"
3576 umount_client $MOUNT || error "Unable to unmount client"
3577 stop_ost2 || error "Unable to stop OST2"
3578 stop_mds || error "Unable to stop MDS"
3579 #writeconf to remove all ost2 traces for subsequent tests
3580 writeconf_or_reformat
3582 run_test 50c "lazystatfs one server down"
3585 start_mds || error "Unable to start MDS"
3586 start_ost || error "Unable to start OST1"
3587 start_ost2 || error "Unable to start OST2"
3588 mount_client $MOUNT || error "Unable to mount client"
3589 $LCTL set_param llite.$FSNAME-*.lazystatfs=1
3590 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
3592 # Issue the statfs during the window where the client still
3593 # belives the OST to be available but it is in fact down.
3594 # No failure just a statfs which hangs for a timeout interval.
3595 stop_ost || error "Unable to stop OST1"
3596 lazystatfs $MOUNT || error "lazystatfs failed with one down server"
3598 umount_client $MOUNT || error "Unable to unmount client"
3599 stop_ost2 || error "Unable to stop OST2"
3600 stop_mds || error "Unable to stop MDS"
3601 #writeconf to remove all ost2 traces for subsequent tests
3602 writeconf_or_reformat
3604 run_test 50d "lazystatfs client/server conn race"
3611 start_mds || error "Unable to start MDS"
3612 #first client should see only one ost
3613 start_ost || error "Unable to start OST1"
3614 wait_osc_import_state mds ost FULL
3616 # Wait for client to detect down OST
3617 stop_ost || error "Unable to stop OST1"
3618 wait_osc_import_state mds ost DISCONN
3620 mount_client $MOUNT || error "Unable to mount client"
3621 $LCTL set_param llite.$FSNAME-*.lazystatfs=0
3623 multiop_bg_pause $MOUNT _f
3627 if [ $RC1 -ne 0 ]; then
3628 log "multiop failed $RC1"
3631 sleep $(( $TIMEOUT+1 ))
3633 [ $? -ne 0 ] && error "process isn't sleep"
3634 start_ost || error "Unable to start OST1"
3635 wait $pid || error "statfs failed"
3638 umount_client $MOUNT || error "Unable to unmount client"
3639 stop_ost || error "Unable to stop OST1"
3640 stop_mds || error "Unable to stop MDS"
3642 run_test 50e "normal statfs all servers down"
3647 CONN_PROC="osc.$FSNAME-OST0001-osc-[M]*.ost_server_uuid"
3649 start_mds || error "Unable to start mds"
3650 #first client should see only one ost
3651 start_ost || error "Unable to start OST1"
3652 wait_osc_import_state mds ost FULL
3654 start_ost2 || error "Unable to start OST2"
3655 wait_osc_import_state mds ost2 FULL
3657 # Wait for client to detect down OST
3658 stop_ost2 || error "Unable to stop OST2"
3660 wait_osc_import_state mds ost2 DISCONN
3661 mount_client $MOUNT || error "Unable to mount client"
3662 $LCTL set_param llite.$FSNAME-*.lazystatfs=0
3664 multiop_bg_pause $MOUNT _f
3668 if [ $RC1 -ne 0 ]; then
3669 log "lazystatfs multiop failed $RC1"
3672 sleep $(( $TIMEOUT+1 ))
3674 [ $? -ne 0 ] && error "process isn't sleep"
3675 start_ost2 || error "Unable to start OST2"
3676 wait $pid || error "statfs failed"
3677 stop_ost2 || error "Unable to stop OST2"
3680 umount_client $MOUNT -f || error "Unable to unmount client"
3681 stop_ost || error "Unable to stop OST1"
3682 stop_mds || error "Unable to stop MDS"
3683 #writeconf to remove all ost2 traces for subsequent tests
3684 writeconf_or_reformat
3686 run_test 50f "normal statfs one server in down"
3689 [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs" && return
3691 start_ost2 || error "Unable to start OST2"
3692 wait_osc_import_state mds ost2 FULL
3693 wait_osc_import_state client ost2 FULL
3695 local PARAM="${FSNAME}-OST0001.osc.active"
3697 $SETSTRIPE -c -1 $DIR/$tfile || error "$SETSTRIPE failed"
3698 do_facet mgs $LCTL conf_param $PARAM=0 ||
3699 error "Unable to deactivate OST"
3701 umount_client $MOUNT || error "Unable to unmount client"
3702 mount_client $MOUNT || error "Unable to mount client"
3703 # This df should not cause a panic
3706 do_facet mgs $LCTL conf_param $PARAM=1 || error "Unable to activate OST"
3707 rm -f $DIR/$tfile || error "unable to remove file $DIR/$tfile"
3708 umount_client $MOUNT || error "Unable to unmount client"
3709 stop_ost2 || error "Unable to stop OST2"
3710 stop_ost || error "Unable to stop OST1"
3711 stop_mds || error "Unable to stop MDS"
3712 #writeconf to remove all ost2 traces for subsequent tests
3713 writeconf_or_reformat
3715 run_test 50g "deactivated OST should not cause panic"
3719 # prepare MDT/OST, make OSC inactive for OST1
3720 [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs" && return
3722 [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
3723 do_facet ost1 "$TUNEFS --param osc.active=0 `ostdevname 1`" ||
3724 error "tunefs OST1 failed"
3725 start_mds || error "Unable to start MDT"
3726 start_ost || error "Unable to start OST1"
3727 start_ost2 || error "Unable to start OST2"
3728 mount_client $MOUNT || error "client start failed"
3730 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
3732 # activatate OSC for OST1
3733 local TEST="$LCTL get_param -n osc.${FSNAME}-OST0000-osc-[!M]*.active"
3734 set_conf_param_and_check client \
3735 "$TEST" "${FSNAME}-OST0000.osc.active" 1 ||
3736 error "Unable to activate OST1"
3738 mkdir $DIR/$tdir/2 || error "mkdir $DIR/$tdir/2 failed"
3739 $SETSTRIPE -c -1 -i 0 $DIR/$tdir/2 ||
3740 error "$SETSTRIPE $DIR/$tdir/2 failed"
3741 sleep 1 && echo "create a file after OST1 is activated"
3743 createmany -o $DIR/$tdir/2/$tfile-%d 1
3745 # check OSC import is working
3746 stat $DIR/$tdir/2/* >/dev/null 2>&1 ||
3747 error "some OSC imports are still not connected"
3750 umount_client $MOUNT || error "Unable to umount client"
3751 stop_ost2 || error "Unable to stop OST2"
3752 cleanup_nocli || error "cleanup_nocli failed with $?"
3754 run_test 50h "LU-642: activate deactivated OST"
3757 # prepare MDT/OST, make OSC inactive for OST1
3758 [ "$MDSCOUNT" -lt "2" ] && skip_env "needs >= 2 MDTs" && return
3761 [ $(facet_fstype mds2) == zfs ] && import_zpool mds2
3762 do_facet mds2 "$TUNEFS --param mdc.active=0 $(mdsdevname 2)" ||
3763 error "tunefs MDT2 failed"
3764 start_mds || error "Unable to start MDT"
3765 start_ost || error "Unable to start OST1"
3766 start_ost2 || error "Unable to start OST2"
3767 mount_client $MOUNT || error "client start failed"
3769 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
3771 $LCTL conf_param ${FSNAME}-MDT0000.mdc.active=0 &&
3772 error "deactive MDC0 succeeds"
3773 # activate MDC for MDT2
3774 local TEST="$LCTL get_param -n mdc.${FSNAME}-MDT0001-mdc-[!M]*.active"
3775 set_conf_param_and_check client \
3776 "$TEST" "${FSNAME}-MDT0001.mdc.active" 1 ||
3777 error "Unable to activate MDT2"
3779 wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds2 FULL
3780 if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.60) ]
3782 wait_dne_interconnect
3784 $LFS mkdir -i1 $DIR/$tdir/2 || error "mkdir $DIR/$tdir/2 failed"
3786 createmany -o $DIR/$tdir/2/$tfile-%d 1 || error "create files failed"
3788 rm -rf $DIR/$tdir/2 || error "unlink dir failed"
3790 # deactivate MDC for MDT2
3791 local TEST="$LCTL get_param -n mdc.${FSNAME}-MDT0001-mdc-[!M]*.active"
3792 set_conf_param_and_check client \
3793 "$TEST" "${FSNAME}-MDT0001.mdc.active" 0 ||
3794 error "Unable to deactivate MDT2"
3796 wait_osp_active mds ${FSNAME}-MDT0001 1 0
3798 $LFS mkdir -i1 $DIR/$tdir/2 &&
3799 error "mkdir $DIR/$tdir/2 succeeds after deactive MDT"
3801 $LFS mkdir -i0 -c$MDSCOUNT $DIR/$tdir/striped_dir ||
3802 error "mkdir $DIR/$tdir/striped_dir fails after deactive MDT2"
3804 local stripe_count=$($LFS getdirstripe -c $DIR/$tdir/striped_dir)
3805 [ $stripe_count -eq $((MDSCOUNT - 1)) ] ||
3806 error "wrong $stripe_count != $((MDSCOUNT -1)) for striped_dir"
3809 umount_client $MOUNT || error "Unable to umount client"
3814 run_test 50i "activate deactivated MDT"
3817 local LOCAL_TIMEOUT=20
3821 check_mount || error "check_mount failed"
3823 mkdir $MOUNT/$tdir || error "mkdir $MOUNT/$tdir failed"
3824 $SETSTRIPE -c -1 $MOUNT/$tdir ||
3825 error "$SETSTRIPE -c -1 $MOUNT/$tdir failed"
3826 #define OBD_FAIL_MDS_REINT_DELAY 0x142
3827 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x142"
3828 touch $MOUNT/$tdir/$tfile &
3831 start_ost2 || error "Unable to start OST1"
3833 stop_ost2 || error "Unable to stop OST1"
3834 umount_client $MOUNT -f || error “unmount $MOUNT failed”
3835 cleanup_nocli || error “stop server failed”
3836 #writeconf to remove all ost2 traces for subsequent tests
3837 writeconf_or_reformat
3839 run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
3848 do_node $node mkdir -p $dest
3849 [ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
3851 do_node $node 'tar cf - '$@' | tar xf - -C '$dest';
3852 [ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
3853 [ $? -eq 0 ] || { error "Unable to tar files"; return 2; }
3855 do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs
3856 [ $? -eq 0 ] || { error "Unable to read xattrs"; return 3; }
3866 local backup2=${TMP}/backup2
3868 do_node $node mkdir -p $backup2
3869 [ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
3871 do_node $node 'tar cf - '$@' | tar xf - -C '$backup2';
3872 [ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
3873 [ $? -eq 0 ] || { error "Unable to tar files to diff"; return 2; }
3875 do_node $node "diff -rq $backup $backup2"
3876 [ $? -eq 0 ] || { error "contents differ"; return 3; }
3878 local xattrs2=${TMP}/xattrs2
3879 do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs2
3880 [ $? -eq 0 ] || { error "Unable to read xattrs to diff"; return 4; }
3882 do_node $node "diff $xattrs $xattrs2"
3883 [ $? -eq 0 ] || { error "xattrs differ"; return 5; }
3885 do_node $node "rm -rf $backup2 $xattrs2"
3886 [ $? -eq 0 ] || { error "Unable to delete temporary files"; return 6; }
3890 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3891 skip "ldiskfs only test"
3895 start_mds || error "Unable to start MDS"
3896 start_ost || error "Unable to start OST1"
3897 mount_client $MOUNT || error "Unable to mount client"
3900 local ost1mnt=$(facet_mntpt ost1)
3901 local ost1node=$(facet_active_host ost1)
3902 local ost1tmp=$TMP/conf52
3905 mkdir $DIR/$tdir || error "Unable to create $DIR/$tdir"
3906 touch $TMP/modified_first || error "Unable to create temporary file"
3907 local mtime=$(stat -c %Y $TMP/modified_first)
3908 do_node $ost1node "mkdir -p $ost1tmp &&
3909 touch -m -d @$mtime $ost1tmp/modified_first" ||
3910 error "Unable to create temporary file"
3913 $SETSTRIPE -c -1 -S 1M $DIR/$tdir || error "$SETSTRIPE failed"
3915 for (( i=0; i < nrfiles; i++ )); do
3916 multiop $DIR/$tdir/$tfile-$i Ow1048576w1048576w524288c ||
3917 error "multiop failed"
3923 echo backup files to $TMP/$tdir
3924 local files=$(find $DIR/$tdir -type f -newer $TMP/modified_first)
3925 copy_files_xattrs $(hostname) $TMP/$tdir $TMP/file_xattrs $files ||
3926 error "Unable to copy files"
3928 umount_client $MOUNT || error "Unable to umount client"
3929 stop_ost || error "Unable to stop ost1"
3931 echo mount ost1 as ldiskfs
3932 do_node $ost1node mkdir -p $ost1mnt || error "Unable to create $ost1mnt"
3933 if ! do_node $ost1node test -b $ost1_dev; then
3936 do_node $ost1node mount -t $(facet_fstype ost1) $loop $ost1_dev \
3938 error "Unable to mount ost1 as ldiskfs"
3941 echo backup objects to $ost1tmp/objects
3942 local objects=$(do_node $ost1node 'find '$ost1mnt'/O/[0-9]* -type f'\
3943 '-size +0 -newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
3944 copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs \
3946 error "Unable to copy objects"
3948 # move objects to lost+found
3949 do_node $ost1node 'mv '$objects' '${ost1mnt}'/lost+found'
3950 [ $? -eq 0 ] || { error "Unable to move objects"; return 14; }
3952 do_node $ost1node "umount $ost1mnt" ||
3953 error "Unable to umount ost1 as ldiskfs"
3955 start_ost || error "Unable to start OST1"
3956 mount_client $MOUNT || error "Unable to mount client"
3958 local REPAIRED=$(do_node $ost1node "$LCTL get_param \
3959 -n osd-ldiskfs.$FSNAME-OST0000.oi_scrub" |
3960 awk '/^lf_repa[ri]*ed/ { print $2 }')
3961 [ $REPAIRED -gt 0 ] ||
3962 error "Some entry under /lost+found should be repaired"
3965 diff_files_xattrs $(hostname) $TMP/$tdir $TMP/file_xattrs $files ||
3966 error "Unable to diff files"
3968 rm -rf $TMP/$tdir $TMP/file_xattrs ||
3969 error "Unable to delete temporary files"
3970 do_node $ost1node "rm -rf $ost1tmp" ||
3971 error "Unable to delete temporary files"
3972 cleanup || error "cleanup failed with $?"
3974 run_test 52 "check recovering objects from lost+found"
3976 # Checks threads_min/max/started for some service
3978 # Arguments: service name (OST or MDT), facet (e.g., ost1, $SINGLEMDS), and a
3979 # parameter pattern prefix like 'ost.*.ost'.
3992 local msg="Insane $modname thread counts"
3993 local ncpts=$(check_cpt_number $facet)
3997 check_mount || return 41
3999 # We need to expand $parampat, but it may match multiple parameters, so
4000 # we'll pick the first one
4001 if ! paramp=$(do_facet $facet "lctl get_param -N ${parampat}.threads_min"|head -1); then
4002 error "Couldn't expand ${parampat}.threads_min parameter name"
4006 # Remove the .threads_min part
4007 paramp=${paramp%.threads_min}
4009 # Check for sanity in defaults
4010 tmin=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
4012 tmax=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
4014 tstarted=$(do_facet $facet "$LCTL get_param \
4015 -n ${paramp}.threads_started" || echo 0)
4016 lassert 23 "$msg (PDSH problems?)" '(($tstarted && $tmin && $tmax))' ||
4018 lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' ||
4020 nthrs=$(expr $tmax - $tmin)
4021 if [ $nthrs -lt $ncpts ]; then
4027 [ $tmin -eq $tmax -a $tmin -eq $tstarted ] &&
4028 skip_env "module parameter forced $facet thread count" &&
4029 tmin=3 && tmax=$((3 * tmax))
4031 # Check that we can change min/max
4032 do_facet $facet "$LCTL set_param \
4033 ${paramp}.threads_min=$((tmin + nthrs))"
4034 do_facet $facet "$LCTL set_param \
4035 ${paramp}.threads_max=$((tmax - nthrs))"
4036 tmin2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
4038 tmax2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
4040 lassert 25 "$msg" '(($tmin2 == ($tmin + $nthrs) &&
4041 $tmax2 == ($tmax - $nthrs)))' || return $?
4043 # Check that we can set min/max to the same value
4044 tmin=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
4046 do_facet $facet "$LCTL set_param ${paramp}.threads_max=$tmin"
4047 tmin2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
4049 tmax2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
4051 lassert 26 "$msg" '(($tmin2 == $tmin && $tmax2 == $tmin))' || return $?
4053 # Check that we can't set max < min
4054 do_facet $facet "$LCTL set_param ${paramp}.threads_max=$((tmin - 1))"
4055 tmin2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
4057 tmax2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
4059 lassert 27 "$msg" '(($tmin2 <= $tmax2))' || return $?
4061 # We need to ensure that we get the module options desired; to do this
4062 # we set LOAD_MODULES_REMOTE=true and we call setmodopts below.
4063 LOAD_MODULES_REMOTE=true
4066 local newvalue="${opts}=$(expr $basethr \* $ncpts)"
4067 setmodopts -a $modname "$newvalue" oldvalue
4070 check_mount || return 41
4072 # Restore previous setting of MODOPTS_*
4073 setmodopts $modname "$oldvalue"
4075 # Check that $opts took
4076 tmin=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min")
4077 tmax=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max")
4078 tstarted=$(do_facet $facet \
4079 "$LCTL get_param -n ${paramp}.threads_started")
4080 lassert 28 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' ||
4089 thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads' '16'
4090 cleanup || error "cleanup failed with rc $?"
4092 run_test 53a "check OSS thread count params"
4096 local mds=$(do_facet $SINGLEMDS "$LCTL get_param \
4097 -N mds.*.*.threads_max 2>/dev/null")
4098 if [ -z "$mds" ]; then
4099 #running this on an old MDT
4100 thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads' 16
4102 thread_sanity MDT $SINGLEMDS 'mds.*.*.' 'mds_num_threads' 16
4104 cleanup || error "cleanup failed with $?"
4106 run_test 53b "check MDS thread count params"
4109 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
4110 skip "ldiskfs only test"
4114 do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1) -p ||
4115 error "llverdev failed with rc=$?"
4118 run_test 54a "test llverdev and partial verify of device"
4121 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
4122 skip "ldiskfs only test"
4127 run_llverfs $MOUNT -p || error "llverfs failed with rc=$?"
4128 cleanup || error "cleanup failed with rc=$?"
4130 run_test 54b "test llverfs and partial verify of filesystem"
4134 local max_ost_index=$1
4135 echo -n $(((max_ost_index + 1) * 8))
4139 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
4140 skip "ldiskfs only test"
4144 local mdsdev=$(mdsdevname 1)
4145 local mdsvdev=$(mdsvdevname 1)
4149 if ! combined_mgs_mds; then
4150 stop_mgs || error "stopping MGS service failed"
4151 format_mgs || error "formatting MGT failed"
4153 add mds1 $(mkfs_opts mds1 ${mdsdev}) --reformat $mdsdev \
4155 add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=$i \
4156 --reformat $(ostdevname 1) $(ostvdevname 1)
4162 echo checking size of lov_objid for ost index $i
4163 LOV_OBJID_SIZE=$(do_facet mds1 "$DEBUGFS -R 'stat lov_objid' $mdsdev 2>/dev/null" |
4164 grep ^User | awk -F 'Size: ' '{print $2}')
4165 if [ "$LOV_OBJID_SIZE" != $(lov_objid_size $i) ]; then
4166 error "lov_objid size has to be $(lov_objid_size $i), not $LOV_OBJID_SIZE"
4168 echo ok, lov_objid size is correct: $LOV_OBJID_SIZE
4175 run_test 55 "check lov_objid size"
4178 local server_version=$(lustre_version_code $SINGLEMDS)
4179 local mds_journal_size_orig=$MDSJOURNALSIZE
4185 add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=10000 --reformat \
4186 $(ostdevname 1) $(ostvdevname 1)
4187 add ost2 $(mkfs_opts ost2 $(ostdevname 2)) --index=1000 --reformat \
4188 $(ostdevname 2) $(ostvdevname 2)
4191 start_ost || error "Unable to start first ost (idx 10000)"
4192 start_ost2 || error "Unable to start second ost (idx 1000)"
4193 mount_client $MOUNT || error "Unable to mount client"
4197 if [[ $server_version -ge $(version_code 2.6.54) ]] ||
4198 [[ $server_version -ge $(version_code 2.5.4) &&
4199 $server_version -lt $(version_code 2.5.11) ]]; then
4200 wait_osc_import_state mds ost1 FULL
4201 wait_osc_import_state mds ost2 FULL
4202 $SETSTRIPE --stripe-count=-1 $DIR/$tfile ||
4203 error "Unable to setstripe $DIR/$tfile"
4204 n=$($LFS getstripe --stripe-count $DIR/$tfile)
4205 [ "$n" -eq 2 ] || error "Stripe count not two: $n"
4210 MDSJOURNALSIZE=$mds_journal_size_orig
4213 run_test 56a "check big OST indexes and out-of-index-order start"
4218 umount_client $MOUNT -f || error "unmount client failed"
4227 [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs" && return
4229 trap cleanup_56b EXIT RETURN ERR
4232 if ! combined_mgs_mds ; then
4237 add mds1 $(mkfs_opts mds1 $(mdsdevname 1)) --index=0 --reformat \
4238 $(mdsdevname 1) $(mdsvdevname 1)
4239 add mds2 $(mkfs_opts mds2 $(mdsdevname 2)) --index=1 --reformat \
4240 $(mdsdevname 2) $(mdsvdevname 2)
4241 add mds3 $(mkfs_opts mds3 $(mdsdevname 3)) --index=1000 --reformat \
4242 $(mdsdevname 3) $(mdsvdevname 3)
4246 start_mdt 1 || error "MDT 1 (idx 0) start failed"
4247 start_mdt 2 || error "MDT 2 (idx 1) start failed"
4248 start_mdt 3 || error "MDT 3 (idx 1000) start failed"
4249 start_ost || error "Unable to start first ost"
4250 start_ost2 || error "Unable to start second ost"
4252 do_nodes $(comma_list $(mdts_nodes)) \
4253 "$LCTL set_param mdt.*.enable_remote_dir=1 \
4254 mdt.*.enable_remote_dir_gid=-1"
4256 mount_client $MOUNT || error "Unable to mount client"
4258 $LFS mkdir -c3 $MOUNT/$tdir || error "failed to make testdir"
4260 echo "This is test file 1!" > $MOUNT/$tdir/$tfile.1 ||
4261 error "failed to make test file 1"
4262 echo "This is test file 2!" > $MOUNT/$tdir/$tfile.2 ||
4263 error "failed to make test file 2"
4264 echo "This is test file 1000!" > $MOUNT/$tdir/$tfile.1000 ||
4265 error "failed to make test file 1000"
4267 rm -rf $MOUNT/$tdir || error "failed to remove testdir"
4269 $LFS mkdir -i1000 $MOUNT/$tdir.1000 ||
4270 error "create remote dir at idx 1000 failed"
4273 echo "=== START lfs df OUTPUT ==="
4275 echo "==== END lfs df OUTPUT ===="
4277 mdtcnt=$(echo -e "$output" | grep $FSNAME-MDT | wc -l)
4278 ostcnt=$(echo -e "$output" | grep $FSNAME-OST | wc -l)
4280 echo "lfs df returned mdt count $mdtcnt and ost count $ostcnt"
4281 [ $mdtcnt -eq 3 ] || error "lfs df returned wrong mdt count"
4282 [ $ostcnt -eq 2 ] || error "lfs df returned wrong ost count"
4284 echo "This is test file 1!" > $MOUNT/$tdir.1000/$tfile.1 ||
4285 error "failed to make test file 1"
4286 echo "This is test file 2!" > $MOUNT/$tdir.1000/$tfile.2 ||
4287 error "failed to make test file 2"
4288 echo "This is test file 1000!" > $MOUNT/$tdir.1000/$tfile.1000 ||
4289 error "failed to make test file 1000"
4290 rm -rf $MOUNT/$tdir.1000 || error "failed to remove remote_dir"
4293 echo "=== START lfs mdts OUTPUT ==="
4295 echo "==== END lfs mdts OUTPUT ===="
4297 echo -e "$output" | grep -v "MDTS:" | awk '{print $1}' |
4298 sed 's/://g' > $TMP/mdts-actual.txt
4299 sort $TMP/mdts-actual.txt -o $TMP/mdts-actual.txt
4301 echo -e "0\n1\n1000" > $TMP/mdts-expected.txt
4303 diff $TMP/mdts-expected.txt $TMP/mdts-actual.txt
4306 rm $TMP/mdts-expected.txt $TMP/mdts-actual.txt
4308 [ $result -eq 0 ] || error "target_obd proc file is incorrect!"
4310 run_test 56b "test target_obd correctness with nonconsecutive MDTs"
4312 test_57a() { # bug 22656
4313 do_rpc_nodes $(facet_active_host ost1) load_modules_local
4314 local NID=$(do_facet ost1 "$LCTL get_param nis" |
4315 tail -1 | awk '{print $1}')
4316 writeconf_or_reformat
4317 [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
4318 do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" ||
4319 error "tunefs failed"
4321 start_ost && error "OST registration from failnode should fail"
4324 run_test 57a "initial registration from failnode should fail (should return errs)"
4327 do_rpc_nodes $(facet_active_host ost1) load_modules_local
4328 local NID=$(do_facet ost1 "$LCTL get_param nis" |
4329 tail -1 | awk '{print $1}')
4330 writeconf_or_reformat
4331 [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
4332 do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" ||
4333 error "tunefs failed"
4335 start_ost || error "OST registration from servicenode should not fail"
4338 run_test 57b "initial registration from servicenode should not fail"
4341 do_facet mgs $LCTL get_param mgs.MGS.live.$FSNAME | grep OST | wc -l
4344 test_58() { # bug 22658
4345 combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
4347 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
4348 createmany -o $DIR/$tdir/$tfile-%d 100
4349 # make sure that OSTs do not cancel llog cookies before we unmount the MDS
4350 #define OBD_FAIL_OBD_LOG_CANCEL_NET 0x601
4351 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x601"
4352 unlinkmany $DIR/$tdir/$tfile-%d 100
4353 stop_mds || error "Unable to stop MDS"
4355 local MNTDIR=$(facet_mntpt $SINGLEMDS)
4356 local devname=$(mdsdevname ${SINGLEMDS//mds/})
4358 # remove all files from the OBJECTS dir
4359 mount_fstype $SINGLEMDS
4361 do_facet $SINGLEMDS "find $MNTDIR/O/1/d* -type f -delete"
4363 unmount_fstype $SINGLEMDS
4364 # restart MDS with missing llog files
4365 start_mds || error "unable to start MDS"
4366 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0"
4369 run_test 58 "missing llog files must not prevent MDT from mounting"
4372 start_mgsmds >> /dev/null
4373 local C1=$(count_osts)
4374 if [ $C1 -eq 0 ]; then
4375 start_ost >> /dev/null
4379 echo "original ost count: $C1 (expect > 0)"
4380 [ $C1 -gt 0 ] || error "No OSTs in $FSNAME log"
4381 start_mgsmds -o writeconf >> /dev/null || error "MDT start failed"
4382 local C2=$(count_osts)
4383 echo "after mdt writeconf count: $C2 (expect 0)"
4384 [ $C2 -gt 0 ] && error "MDT writeconf should erase OST logs"
4385 echo "OST start without writeconf should fail:"
4386 start_ost >> /dev/null &&
4387 error "OST start without writeconf didn't fail"
4388 echo "OST start with writeconf should succeed:"
4389 start_ost -o writeconf >> /dev/null || error "OST1 start failed"
4390 local C3=$(count_osts)
4391 echo "after ost writeconf count: $C3 (expect 1)"
4392 [ $C3 -eq 1 ] || error "new OST writeconf should add:"
4393 start_ost2 -o writeconf >> /dev/null || error "OST2 start failed"
4394 local C4=$(count_osts)
4395 echo "after ost2 writeconf count: $C4 (expect 2)"
4396 [ $C4 -eq 2 ] || error "OST2 writeconf should add log"
4397 stop_ost2 >> /dev/null
4398 cleanup_nocli >> /dev/null
4399 #writeconf to remove all ost2 traces for subsequent tests
4400 writeconf_or_reformat
4402 run_test 59 "writeconf mount option"
4404 test_60() { # LU-471
4407 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
4408 skip "ldiskfs only test"
4412 for num in $(seq $MDSCOUNT); do
4413 add mds${num} $(mkfs_opts mds${num} $(mdsdevname $num)) \
4414 --mkfsoptions='\" -E stride=64 -O ^uninit_bg\"' \
4415 --reformat $(mdsdevname $num) $(mdsvdevname $num) ||
4419 dump=$(do_facet $SINGLEMDS dumpe2fs $(mdsdevname 1))
4420 [ ${PIPESTATUS[0]} -eq 0 ] || error "dumpe2fs $(mdsdevname 1) failed"
4422 # MDT default has dirdata feature
4423 echo $dump | grep dirdata > /dev/null || error "dirdata is not set"
4424 # we disable uninit_bg feature
4425 echo $dump | grep uninit_bg > /dev/null && error "uninit_bg is set"
4426 # we set stride extended options
4427 echo $dump | grep stride > /dev/null || error "stride is not set"
4430 run_test 60 "check mkfs.lustre --mkfsoptions -E -O options setting"
4435 [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.1.53) ] ||
4436 { skip "Need MDS version at least 2.1.53"; return 0; }
4438 if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
4439 ! large_xattr_enabled; then
4442 for num in $(seq $MDSCOUNT); do
4443 do_facet mds${num} $TUNE2FS -O large_xattr \
4444 $(mdsdevname $num) ||
4445 error "tune2fs on mds $num failed"
4449 combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
4450 setup_noconfig || error "setting up the filesystem failed"
4451 client_up || error "starting client failed"
4453 local file=$DIR/$tfile
4454 touch $file || error "touch $file failed"
4456 local large_value="$(generate_string $(max_xattr_size))"
4457 local small_value="bar"
4459 local name="trusted.big"
4460 log "save large xattr $name on $file"
4461 setfattr -n $name -v $large_value $file ||
4462 error "saving $name on $file failed"
4464 local new_value=$(get_xattr_value $name $file)
4465 [[ "$new_value" != "$large_value" ]] &&
4466 error "$name different after saving"
4468 log "shrink value of $name on $file"
4469 setfattr -n $name -v $small_value $file ||
4470 error "shrinking value of $name on $file failed"
4472 new_value=$(get_xattr_value $name $file)
4473 [[ "$new_value" != "$small_value" ]] &&
4474 error "$name different after shrinking"
4476 log "grow value of $name on $file"
4477 setfattr -n $name -v $large_value $file ||
4478 error "growing value of $name on $file failed"
4480 new_value=$(get_xattr_value $name $file)
4481 [[ "$new_value" != "$large_value" ]] &&
4482 error "$name different after growing"
4484 log "check value of $name on $file after remounting MDS"
4486 new_value=$(get_xattr_value $name $file)
4487 [[ "$new_value" != "$large_value" ]] &&
4488 error "$name different after remounting MDS"
4490 log "remove large xattr $name from $file"
4491 setfattr -x $name $file || error "removing $name from $file failed"
4494 stopall || error "stopping for e2fsck run"
4495 for num in $(seq $MDSCOUNT); do
4496 run_e2fsck $(facet_active_host mds$num) \
4497 $(mdsdevname $num) "-y" ||
4498 error "e2fsck MDT$num failed"
4500 setup_noconfig || error "remounting the filesystem failed"
4503 # need to delete this file to avoid problems in other tests
4505 stopall || error "stopping systems to turn off large_xattr"
4507 for num in $(seq $MDSCOUNT); do
4508 do_facet mds${num} $TUNE2FS -O ^large_xattr \
4509 $(mdsdevname $num) ||
4510 error "tune2fs on mds $num failed"
4514 run_test 61 "large xattr"
4517 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
4518 skip "ldiskfs only test"
4523 local mdsdev=$(mdsdevname 1)
4524 local ostdev=$(ostdevname 1)
4526 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
4527 { skip "Need MDS version at least 2.2.51"; return 0; }
4529 echo "disable journal for mds"
4530 do_facet mds1 $TUNE2FS -O ^has_journal $mdsdev || error "tune2fs failed"
4531 start_mds && error "MDT start should fail"
4532 echo "disable journal for ost"
4533 do_facet ost1 $TUNE2FS -O ^has_journal $ostdev || error "tune2fs failed"
4534 start_ost && error "OST start should fail"
4535 cleanup || error "cleanup failed with rc $?"
4538 run_test 62 "start with disabled journal"
4541 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
4542 skip "ldiskfs only test"
4546 do_rpc_nodes $(facet_active_host $SINGLEMDS) load_module ldiskfs
4547 local inode_slab=$(do_facet $SINGLEMDS "cat /proc/slabinfo" |
4548 awk '/ldiskfs_inode_cache/ { print $5 / $6 }')
4549 if [ -z "$inode_slab" ]; then
4550 skip "ldiskfs module has not been loaded"
4554 echo "$inode_slab ldiskfs inodes per page"
4555 [ "${inode_slab%.*}" -ge "3" ] && return 0
4557 # If kmalloc-128 is also 1 per page - this is a debug kernel
4558 # and so this is not an error.
4559 local kmalloc128=$(do_facet $SINGLEMDS "cat /proc/slabinfo" |
4560 awk '/^(kmalloc|size)-128 / { print $5 / $6 }')
4561 # 32 128-byte chunks in 4k
4562 [ "${kmalloc128%.*}" -lt "32" ] ||
4563 error "ldiskfs inode too big, only $inode_slab objs/page, " \
4564 "kmalloc128 = $kmalloc128 objs/page"
4566 run_test 63 "Verify each page can at least hold 3 ldiskfs inodes"
4569 start_mds || error "unable to start MDS"
4570 start_ost || error "Unable to start OST1"
4571 start_ost2 || error "Unable to start second ost"
4572 mount_client $MOUNT || error "Unable to mount client"
4573 stop_ost2 || error "Unable to stop second ost"
4576 umount_client $MOUNT -f || error “unmount $MOUNT failed”
4577 cleanup_nocli || error "cleanup_nocli failed with $?"
4578 #writeconf to remove all ost2 traces for subsequent tests
4579 writeconf_or_reformat
4581 run_test 64 "check lfs df --lazy "
4583 test_65() { # LU-2237
4584 # Currently, the test is only valid for ldiskfs backend
4585 [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
4586 skip "ldiskfs only test" && return
4588 local devname=$(mdsdevname ${SINGLEMDS//mds/})
4589 local brpt=$(facet_mntpt brpt)
4592 if ! do_facet $SINGLEMDS "test -b $devname"; then
4596 stop_mds || error "Unable to stop MDS"
4597 local obj=$(do_facet $SINGLEMDS \
4598 "$DEBUGFS -c -R \\\"stat last_rcvd\\\" $devname" |
4600 if [ -z "$obj" ]; then
4601 # The MDT may be just re-formatted, mount the MDT for the
4602 # first time to guarantee the "last_rcvd" file is there.
4603 start_mds || error "fail to mount the MDS for the first time"
4604 stop_mds || error "Unable to stop MDS"
4607 # remove the "last_rcvd" file
4608 do_facet $SINGLEMDS "mkdir -p $brpt"
4609 do_facet $SINGLEMDS \
4610 "mount -t $(facet_fstype $SINGLEMDS) $opts $devname $brpt"
4611 do_facet $SINGLEMDS "rm -f ${brpt}/last_rcvd"
4612 do_facet $SINGLEMDS "$UMOUNT $brpt"
4614 # restart MDS, the "last_rcvd" file should be recreated.
4615 start_mds || error "fail to restart the MDS"
4616 stop_mds || error "Unable to stop MDS"
4617 obj=$(do_facet $SINGLEMDS \
4618 "$DEBUGFS -c -R \\\"stat last_rcvd\\\" $devname" | grep Inode)
4619 [ -n "$obj" ] || error "fail to re-create the last_rcvd"
4621 run_test 65 "re-create the lost last_rcvd file when server mount"
4624 [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
4625 { skip "Need MGS version at least 2.3.59"; return 0; }
4628 local OST1_NID=$(do_facet ost1 $LCTL list_nids | head -1)
4629 local MDS_NID=$(do_facet $SINGLEMDS $LCTL list_nids | head -1)
4631 echo "replace_nids should fail if MDS, OSTs and clients are UP"
4632 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
4633 error "replace_nids fail"
4635 umount_client $MOUNT || error "unmounting client failed"
4636 echo "replace_nids should fail if MDS and OSTs are UP"
4637 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
4638 error "replace_nids fail"
4640 stop_ost || error "Unable to stop OST1"
4641 echo "replace_nids should fail if MDS is UP"
4642 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
4643 error "replace_nids fail"
4645 stop_mds || error "stopping mds failed"
4647 if combined_mgs_mds; then
4648 start_mdt 1 "-o nosvc" ||
4649 error "starting mds with nosvc option failed"
4652 echo "command should accept two parameters"
4653 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 &&
4654 error "command should accept two params"
4656 echo "correct device name should be passed"
4657 do_facet mgs $LCTL replace_nids $FSNAME-WRONG0000 $OST1_NID &&
4658 error "wrong devname"
4660 echo "wrong nids list should not destroy the system"
4661 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 "wrong nids list" &&
4664 echo "replace OST nid"
4665 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID ||
4666 error "replace nids failed"
4668 echo "command should accept two parameters"
4669 do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 &&
4670 error "command should accept two params"
4672 echo "wrong nids list should not destroy the system"
4673 do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 "wrong nids list" &&
4676 echo "replace MDS nid"
4677 do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 $MDS_NID ||
4678 error "replace nids failed"
4680 if ! combined_mgs_mds ; then
4683 stop_mds || error "Unable to stop MDS"
4687 check_mount || error "error after nid replace"
4688 cleanup || error "cleanup failed"
4691 run_test 66 "replace nids"
4693 test_67() { #LU-2950
4694 local legacy="$TMP/legacy_lnet_config"
4695 local new="$TMP/new_routes_test"
4696 local out="$TMP/config_out_file"
4697 local verify="$TMP/conv_verify"
4698 local verify_conf="$TMP/conf_verify"
4700 # Create the legacy file that will be run through the
4701 # lustre_routes_conversion script
4702 cat <<- LEGACY_LNET_CONFIG > $legacy
4703 tcp1 23 192.168.213.1@tcp:1; tcp5 34 193.30.4.3@tcp:4;
4704 tcp2 54 10.1.3.2@tcp;
4705 tcp3 10.3.4.3@tcp:3;
4709 # Create the verification file to verify the output of
4710 # lustre_routes_conversion script against.
4711 cat <<- VERIFY_LNET_CONFIG > $verify
4712 tcp1: { gateway: 192.168.213.1@tcp, hop: 23, priority: 1 }
4713 tcp5: { gateway: 193.30.4.3@tcp, hop: 34, priority: 4 }
4714 tcp2: { gateway: 10.1.3.2@tcp, hop: 54 }
4715 tcp3: { gateway: 10.3.4.3@tcp, priority: 3 }
4716 tcp4: { gateway: 10.3.3.4@tcp }
4719 # Create the verification file to verify the output of
4720 # lustre_routes_config script against
4721 cat <<- VERIFY_LNET_CONFIG > $verify_conf
4722 lctl --net tcp1 add_route 192.168.213.1@tcp 23 1
4723 lctl --net tcp5 add_route 193.30.4.3@tcp 34 4
4724 lctl --net tcp2 add_route 10.1.3.2@tcp 54 4
4725 lctl --net tcp3 add_route 10.3.4.3@tcp 1 3
4726 lctl --net tcp4 add_route 10.3.3.4@tcp 1 3
4729 lustre_routes_conversion $legacy $new > /dev/null
4730 if [ -f $new ]; then
4731 # verify the conversion output
4732 cmp -s $new $verify > /dev/null
4733 if [ $? -eq 1 ]; then
4734 error "routes conversion failed"
4737 lustre_routes_config --dry-run --verbose $new > $out
4738 # check that the script succeeded
4739 cmp -s $out $verify_conf > /dev/null
4740 if [ $? -eq 1 ]; then
4741 error "routes config failed"
4744 error "routes conversion test failed"
4746 # remove generated files
4747 rm -f $new $legacy $verify $verify_conf $out
4749 run_test 67 "test routes conversion and configuration"
4757 [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.53) ] ||
4758 { skip "Need MDS version at least 2.4.53"; return 0; }
4760 umount_client $MOUNT || error "umount client failed"
4762 if ! combined_mgs_mds; then
4763 start_mgs || error "start mgs failed"
4766 start_mdt 1 || error "MDT start failed"
4767 start_ost || error "Unable to start OST1"
4769 # START-END - the sequences we'll be reserving
4770 START=$(do_facet $SINGLEMDS \
4771 $LCTL get_param -n seq.ctl*.space | awk -F'[[ ]' '{print $2}')
4772 END=$((START + (1 << 30)))
4773 do_facet $SINGLEMDS \
4774 $LCTL set_param seq.ctl*.fldb="[$START-$END\):0:mdt"
4776 # reset the sequences MDT0000 has already assigned
4777 do_facet $SINGLEMDS \
4778 $LCTL set_param seq.srv*MDT0000.space=clear
4780 # remount to let the client allocate new sequence
4781 mount_client $MOUNT || error "mount client failed"
4783 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
4784 do_facet $SINGLEMDS \
4785 $LCTL get_param seq.srv*MDT0000.space
4786 $LFS path2fid $DIR/$tfile
4788 local old_ifs="$IFS"
4790 fid=($($LFS path2fid $DIR/$tfile))
4794 if [[ $seq < $END ]]; then
4795 error "used reserved sequence $seq?"
4797 cleanup || error "cleanup failed with $?"
4799 run_test 68 "be able to reserve specific sequences in FLDB"
4801 # Test 69: is about the total number of objects ever created on an OST.
4802 # so that when it is reformatted the normal MDS->OST orphan recovery won't
4803 # just "precreate" the missing objects. In the past it might try to recreate
4804 # millions of objects after an OST was reformatted
4806 local server_version=$(lustre_version_code $SINGLEMDS)
4808 [[ $server_version -lt $(version_code 2.4.2) ]] &&
4809 skip "Need MDS version at least 2.4.2" && return
4811 [[ $server_version -ge $(version_code 2.4.50) ]] &&
4812 [[ $server_version -lt $(version_code 2.5.0) ]] &&
4813 skip "Need MDS version at least 2.5.0" && return
4816 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
4818 # use OST0000 since it probably has the most creations
4819 local OSTNAME=$(ostname_from_index 0)
4820 local mdtosc_proc1=$(get_mdtosc_proc_path mds1 $OSTNAME)
4821 local last_id=$(do_facet mds1 $LCTL get_param -n \
4822 osc.$mdtosc_proc1.prealloc_last_id)
4824 # Want to have OST LAST_ID over 5 * OST_MAX_PRECREATE to
4825 # verify that the LAST_ID recovery is working properly. If
4826 # not, then the OST will refuse to allow the MDS connect
4827 # because the LAST_ID value is too different from the MDS
4828 #define OST_MAX_PRECREATE=20000
4829 local ost_max_pre=20000
4830 local num_create=$(( ost_max_pre * 5 + 1 - last_id))
4832 # If the LAST_ID is already over 5 * OST_MAX_PRECREATE, we don't
4833 # need to create any files. So, skip this section.
4834 if [ $num_create -gt 0 ]; then
4835 # Check the number of inodes available on OST0
4837 local ifree=$($LFS df -i $MOUNT | awk '/OST0000/ { print $4 }')
4838 log "On OST0, $ifree inodes available. Want $num_create."
4840 $SETSTRIPE -i 0 $DIR/$tdir ||
4841 error "$SETSTRIPE -i 0 $DIR/$tdir failed"
4842 if [ $ifree -lt 10000 ]; then
4843 files=$(( ifree - 50 ))
4848 local j=$((num_create / files + 1))
4849 for i in $(seq 1 $j); do
4850 createmany -o $DIR/$tdir/$tfile-$i- $files ||
4851 error "createmany fail create $files files: $?"
4852 unlinkmany $DIR/$tdir/$tfile-$i- $files ||
4853 error "unlinkmany failed unlink $files files"
4857 # delete all of the files with objects on OST0 so the
4858 # filesystem is not inconsistent later on
4859 $LFS find $MOUNT --ost 0 -print0 | xargs -0 rm
4861 umount_client $MOUNT || error "umount client failed"
4862 stop_ost || error "OST0 stop failure"
4863 add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --reformat --replace \
4864 $(ostdevname 1) $(ostvdevname 1) ||
4865 error "reformat and replace $ostdev failed"
4866 start_ost || error "OST0 restart failure"
4867 wait_osc_import_state mds ost FULL
4869 mount_client $MOUNT || error "mount client failed"
4870 touch $DIR/$tdir/$tfile-last || error "create file after reformat"
4871 local idx=$($GETSTRIPE -i $DIR/$tdir/$tfile-last)
4872 [ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
4874 local iused=$($LFS df -i $MOUNT | awk '/OST0000/ { print $3 }')
4875 log "On OST0, $iused used inodes"
4876 [ $iused -ge $((ost_max_pre/2 + 1000)) ] &&
4877 error "OST replacement created too many inodes; $iused"
4878 cleanup || error "cleanup failed with $?"
4880 run_test 69 "replace an OST with the same index"
4883 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4886 cleanup || error "cleanup failed with $?"
4888 start_mdt 1 || error "MDT0 start fail"
4890 start_ost || error "OST0 start fail"
4891 for num in $(seq 2 $MDSCOUNT); do
4892 start_mdt $num || return
4895 mount_client $MOUNT || error "mount client fails"
4897 mkdir $DIR/$tdir || error "create $DIR/$tdir failed"
4899 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4900 error "create remote dir fail"
4902 rm -rf $DIR/$tdir || error "delete dir fail"
4903 cleanup || error "cleanup failed with $?"
4905 run_test 70a "start MDT0, then OST, then MDT1"
4908 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4911 start_ost || error "OST0 start fail"
4913 start_mds || error "MDS start fail"
4915 mount_client $MOUNT || error "mount client fails"
4917 mkdir $DIR/$tdir || error "create $DIR/$tdir failed"
4919 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4920 error "create remote dir fail"
4922 rm -rf $DIR/$tdir || error "delete dir fail"
4924 cleanup || error "cleanup failed with $?"
4926 run_test 70b "start OST, MDT1, MDT0"
4929 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4932 start_mds || error "MDS start fail"
4933 start_ost || error "OST0 start fail"
4935 mount_client $MOUNT || error "mount client fails"
4936 stop_mdt 1 || error "MDT1 start fail"
4938 local mdc_for_mdt1=$($LCTL dl | grep MDT0000-mdc | awk '{print $4}')
4939 echo "deactivate $mdc_for_mdt1"
4940 $LCTL --device $mdc_for_mdt1 deactivate ||
4941 error "set $mdc_for_mdt1 deactivate failed"
4943 mkdir $DIR/$tdir && error "mkdir succeed"
4945 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir &&
4946 error "create remote dir succeed"
4948 cleanup || error "cleanup failed with $?"
4950 run_test 70c "stop MDT0, mkdir fail, create remote dir fail"
4953 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4956 start_mds || error "MDS start fail"
4957 start_ost || error "OST0 start fail"
4959 mount_client $MOUNT || error "mount client fails"
4961 stop_mdt 2 || error "MDT1 start fail"
4963 local mdc_for_mdt2=$($LCTL dl | grep MDT0001-mdc |
4965 echo "deactivate $mdc_for_mdt2"
4966 $LCTL --device $mdc_for_mdt2 deactivate ||
4967 error "set $mdc_for_mdt2 deactivate failed"
4969 mkdir $DIR/$tdir || error "mkdir fail"
4970 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir &&
4971 error "create remote dir succeed"
4973 rm -rf $DIR/$tdir || error "delete dir fail"
4975 cleanup || error "cleanup failed with $?"
4977 run_test 70d "stop MDT1, mkdir succeed, create remote dir fail"
4980 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4982 [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.62) ] ||
4983 { skip "Need MDS version at least 2.7.62"; return 0; }
4985 cleanup || error "cleanup failed with $?"
4987 local mdsdev=$(mdsdevname 1)
4988 local ostdev=$(ostdevname 1)
4989 local mdsvdev=$(mdsvdevname 1)
4990 local ostvdev=$(ostvdevname 1)
4991 local opts_mds="$(mkfs_opts mds1 $mdsdev) --reformat $mdsdev $mdsvdev"
4992 local opts_ost="$(mkfs_opts ost1 $ostdev) --reformat $ostdev $ostvdev"
4994 add mds1 $opts_mds || error "add mds1 failed"
4995 start_mdt 1 || error "start mdt1 failed"
4996 add ost1 $opts_ost || error "add ost1 failed"
4997 start_ost || error "start ost failed"
4998 mount_client $MOUNT > /dev/null || error "mount client $MOUNT failed"
5000 local soc=$(do_facet mds1 "$LCTL get_param -n \
5001 mdt.*MDT0000.sync_lock_cancel")
5002 [ $soc == "never" ] || error "SoC enabled on single MDS"
5004 for i in $(seq 2 $MDSCOUNT); do
5005 mdsdev=$(mdsdevname $i)
5006 mdsvdev=$(mdsvdevname $i)
5007 opts_mds="$(mkfs_opts mds$i $mdsdev) --reformat $mdsdev \
5009 add mds$i $opts_mds || error "add mds$i failed"
5010 start_mdt $i || error "start mdt$i fail"
5013 wait_dne_interconnect
5015 for i in $(seq $MDSCOUNT); do
5016 soc=$(do_facet mds$i "$LCTL get_param -n \
5017 mdt.*MDT000$((i - 1)).sync_lock_cancel")
5018 [ $soc == "blocking" ] || error "SoC not enabled on DNE"
5021 for i in $(seq 2 $MDSCOUNT); do
5022 stop_mdt $i || error "stop mdt$i fail"
5024 soc=$(do_facet mds1 "$LCTL get_param -n \
5025 mdt.*MDT0000.sync_lock_cancel")
5026 [ $soc == "never" ] || error "SoC enabled on single MDS"
5027 umount_client $MOUNT -f > /dev/null
5029 cleanup || error "cleanup failed with $?"
5031 run_test 70e "Sync-on-Cancel will be enabled by default on DNE"
5034 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
5035 if combined_mgs_mds; then
5036 skip "needs separate MGS/MDT" && return
5040 start_mdt 1 || error "MDT0 start fail"
5041 start_ost || error "OST0 start fail"
5042 for num in $(seq 2 $MDSCOUNT); do
5043 start_mdt $num || return
5046 start_ost2 || error "OST1 start fail"
5048 mount_client $MOUNT || error "mount client fails"
5050 mkdir $DIR/$tdir || error "mkdir fail"
5051 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
5052 error "create remote dir succeed"
5054 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
5055 rm -rf $DIR/$tdir || error "delete dir fail"
5057 umount_client $MOUNT || error "umount_client failed"
5058 stop_mds || error "MDS stop fail"
5059 stop_ost || error "OST0 stop fail"
5060 stop_ost2 || error "OST1 stop fail"
5062 run_test 71a "start MDT0 OST0, MDT1, OST1"
5065 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
5066 if combined_mgs_mds; then
5067 skip "needs separate MGS/MDT" && return
5071 for num in $(seq 2 $MDSCOUNT); do
5072 start_mdt $num || return
5074 start_ost || error "OST0 start fail"
5075 start_mdt 1 || error "MDT0 start fail"
5076 start_ost2 || error "OST1 start fail"
5078 mount_client $MOUNT || error "mount client fails"
5080 mkdir $DIR/$tdir || error "mkdir fail"
5081 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
5082 error "create remote dir succeed"
5084 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
5085 rm -rf $DIR/$tdir || error "delete dir fail"
5087 umount_client $MOUNT || error "umount_client failed"
5088 stop_mds || error "MDT0 stop fail"
5089 stop_ost || error "OST0 stop fail"
5090 stop_ost2 || error "OST1 stop fail"
5092 run_test 71b "start MDT1, OST0, MDT0, OST1"
5095 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
5096 if combined_mgs_mds; then
5097 skip "needs separate MGS/MDT" && return
5101 start_ost || error "OST0 start fail"
5102 start_ost2 || error "OST1 start fail"
5103 for num in $(seq 2 $MDSCOUNT); do
5104 start_mdt $num || return
5106 start_mdt 1 || error "MDT0 start fail"
5108 mount_client $MOUNT || error "mount client fails"
5110 mkdir $DIR/$tdir || error "mkdir fail"
5111 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
5112 error "create remote dir succeed"
5114 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
5115 rm -rf $DIR/$tdir || error "delete dir fail"
5117 umount_client $MOUNT || error "umount_client failed"
5118 stop_mds || error "MDS stop fail"
5119 stop_ost || error "OST0 stop fail"
5120 stop_ost2 || error "OST1 stop fail"
5123 run_test 71c "start OST0, OST1, MDT1, MDT0"
5126 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
5127 if combined_mgs_mds; then
5128 skip "needs separate MGS/MDT" && return
5132 start_ost || error "OST0 start fail"
5133 for num in $(seq 2 $MDSCOUNT); do
5134 start_mdt $num || return
5136 start_mdt 1 || error "MDT0 start fail"
5137 start_ost2 || error "OST1 start fail"
5139 mount_client $MOUNT || error "mount client fails"
5141 mkdir $DIR/$tdir || error "mkdir fail"
5142 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
5143 error "create remote dir succeed"
5145 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
5146 rm -rf $DIR/$tdir || error "delete dir fail"
5148 umount_client $MOUNT || error "umount_client failed"
5149 stop_mds || error "MDS stop fail"
5150 stop_ost || error "OST0 stop fail"
5151 stop_ost2 || error "OST1 stop fail"
5154 run_test 71d "start OST0, MDT1, MDT0, OST1"
5157 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
5158 if combined_mgs_mds; then
5159 skip "needs separate MGS/MDT" && return
5163 start_ost || error "OST0 start fail"
5164 for num in $(seq 2 $MDSCOUNT); do
5165 start_mdt $num || return
5167 start_ost2 || error "OST1 start fail"
5168 start_mdt 1 || error "MDT0 start fail"
5170 mount_client $MOUNT || error "mount client fails"
5172 mkdir $DIR/$tdir || error "mkdir fail"
5173 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
5174 error "create remote dir succeed"
5176 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
5177 rm -rf $DIR/$tdir || error "delete dir fail"
5179 umount_client $MOUNT || error "umount_client failed"
5180 stop_mds || error "MDS stop fail"
5181 stop_ost || error "OST0 stop fail"
5182 stop_ost2 || error "OST1 stop fail"
5185 run_test 71e "start OST0, MDT1, OST1, MDT0"
5187 test_72() { #LU-2634
5188 local mdsdev=$(mdsdevname 1)
5189 local ostdev=$(ostdevname 1)
5190 local cmd="$E2FSCK -fnvd $mdsdev"
5194 [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
5195 skip "ldiskfs only test" && return
5197 if combined_mgs_mds; then
5198 add_options='--reformat'
5200 add_options='--reformat --replace'
5203 #tune MDT with "-O extents"
5205 for num in $(seq $MDSCOUNT); do
5206 add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
5207 $add_options $(mdsdevname $num) $(mdsvdevname $num) ||
5208 error "add mds $num failed"
5209 do_facet mds${num} "$TUNE2FS -O extents $(mdsdevname $num)" ||
5210 error "$TUNE2FS failed on mds${num}"
5213 add ost1 $(mkfs_opts ost1 $ostdev) $add_options $ostdev ||
5214 error "add $ostdev failed"
5215 start_mds || error "start mds failed"
5216 start_ost || error "start ost failed"
5217 mount_client $MOUNT || error "mount client failed"
5219 #create some short symlinks
5220 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
5221 createmany -o $DIR/$tdir/$tfile-%d $fn
5222 echo "create $fn short symlinks"
5223 for i in $(seq -w 1 $fn); do
5224 ln -s $DIR/$tdir/$tfile-$i $MOUNT/$tfile-$i
5229 umount_client $MOUNT || error "umount client failed"
5230 stop_mds || error "stop mds failed"
5231 stop_ost || error "stop ost failed"
5234 run_e2fsck $(facet_active_host $SINGLEMDS) $mdsdev "-n"
5236 run_test 72 "test fast symlink with extents flag enabled"
5238 test_73() { #LU-3006
5239 [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
5240 do_facet ost1 "$TUNEFS --failnode=1.2.3.4@$NETTYPE $(ostdevname 1)" ||
5241 error "1st tunefs failed"
5242 start_mgsmds || error "start mds failed"
5243 start_ost || error "start ost failed"
5244 mount_client $MOUNT || error "mount client failed"
5245 $LCTL get_param -n osc.*OST0000-osc-[^M]*.import | grep failover_nids |
5246 grep 1.2.3.4@$NETTYPE || error "failover nids haven't changed"
5247 umount_client $MOUNT || error "umount client failed"
5251 run_test 73 "failnode to update from mountdata properly"
5253 test_75() { # LU-2374
5254 [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
5255 skip "Need MDS version at least 2.4.1" && return
5258 local opts_mds="$(mkfs_opts mds1 $(mdsdevname 1)) \
5259 --reformat $(mdsdevname 1) $(mdsvdevname 1)"
5260 local opts_ost="$(mkfs_opts ost1 $(ostdevname 1)) \
5261 --reformat $(ostdevname 1) $(ostvdevname 1)"
5263 #check with default parameters
5264 add mds1 $opts_mds || error "add mds1 failed for default params"
5265 add ost1 $opts_ost || error "add ost1 failed for default params"
5267 opts_mds=$(echo $opts_mds | sed -e "s/--mdt//")
5268 opts_mds=$(echo $opts_mds |
5269 sed -e "s/--index=$index/--index=$index --mdt/")
5270 opts_ost=$(echo $opts_ost | sed -e "s/--ost//")
5271 opts_ost=$(echo $opts_ost |
5272 sed -e "s/--index=$index/--index=$index --ost/")
5274 add mds1 $opts_mds || error "add mds1 failed for new params"
5275 add ost1 $opts_ost || error "add ost1 failed for new params"
5276 if ! combined_mgs_mds; then
5277 stop_mgs || error "stop mgs failed"
5282 run_test 75 "The order of --index should be irrelevant"
5285 [[ $(lustre_version_code mgs) -ge $(version_code 2.4.52) ]] ||
5286 { skip "Need MDS version at least 2.4.52" && return 0; }
5288 if ! combined_mgs_mds; then
5289 start_mgs || error "start mgs failed"
5292 local MDMB_PARAM="osc.*.max_dirty_mb"
5293 echo "Change MGS params"
5294 local MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM |
5296 echo "max_dirty_mb: $MAX_DIRTY_MB"
5297 local NEW_MAX_DIRTY_MB=$((MAX_DIRTY_MB + MAX_DIRTY_MB))
5298 echo "new_max_dirty_mb: $NEW_MAX_DIRTY_MB"
5299 do_facet mgs $LCTL set_param -P $MDMB_PARAM=$NEW_MAX_DIRTY_MB
5300 wait_update $HOSTNAME "$LCTL get_param -n $MDMB_PARAM |
5301 head -1" $NEW_MAX_DIRTY_MB
5302 MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM | head -1)
5303 echo "$MAX_DIRTY_MB"
5304 [ $MAX_DIRTY_MB = $NEW_MAX_DIRTY_MB ] ||
5305 error "error while apply max_dirty_mb"
5307 echo "Check the value is stored after remount"
5310 wait_update $HOSTNAME "$LCTL get_param -n $MDMB_PARAM |
5311 head -1" $NEW_MAX_DIRTY_MB
5312 MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM | head -1)
5313 [ $MAX_DIRTY_MB = $NEW_MAX_DIRTY_MB ] ||
5314 error "max_dirty_mb is not saved after remount"
5316 echo "Change OST params"
5317 CLIENT_PARAM="obdfilter.*.client_cache_count"
5318 local CLIENT_CACHE_COUNT
5319 CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
5321 echo "client_cache_count: $CLIENT_CACHE_COUNT"
5322 NEW_CLIENT_CACHE_COUNT=$((CLIENT_CACHE_COUNT+CLIENT_CACHE_COUNT))
5323 echo "new_client_cache_count: $NEW_CLIENT_CACHE_COUNT"
5324 do_facet mgs $LCTL set_param -P $CLIENT_PARAM=$NEW_CLIENT_CACHE_COUNT
5325 wait_update $(facet_host ost1) "$LCTL get_param -n $CLIENT_PARAM |
5326 head -1" $NEW_CLIENT_CACHE_COUNT
5327 CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
5329 echo "$CLIENT_CACHE_COUNT"
5330 [ $CLIENT_CACHE_COUNT = $NEW_CLIENT_CACHE_COUNT ] ||
5331 error "error while apply client_cache_count"
5333 echo "Check the value is stored after remount"
5336 wait_update $(facet_host ost1) "$LCTL get_param -n $CLIENT_PARAM |
5337 head -1" $NEW_CLIENT_CACHE_COUNT
5338 CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
5340 echo "$CLIENT_CACHE_COUNT"
5341 [ $CLIENT_CACHE_COUNT = $NEW_CLIENT_CACHE_COUNT ] ||
5342 error "client_cache_count is not saved after remount"
5345 run_test 76a "set permanent params set_param -P"
5347 test_76b() { # LU-4783
5348 [[ $(lustre_version_code mgs) -ge $(version_code 2.5.57) ]] ||
5349 { skip "Need MGS version at least 2.5.57" && return 0; }
5352 do_facet mgs $LCTL get_param mgs.MGS.live.params ||
5353 error "start params log failed"
5356 run_test 76b "verify params log setup correctly"
5359 [[ $(lustre_version_code mgs) -ge $(version_code 2.8.54) ]] ||
5360 { skip "Need MDS version at least 2.4.52" && return 0; }
5362 local MASK_PARAM="mdd.*.changelog_mask"
5363 echo "Change changelog_mask"
5364 do_facet mgs $LCTL set_param -P $MASK_PARAM=-CLOSE ||
5365 error "Can't change changlog_mask"
5366 wait_update $(facet_host mds) "$LCTL get_param -n $MASK_PARAM |
5369 echo "Check the value is stored after mds remount"
5370 stop_mds || error "Failed to stop MDS"
5371 start_mds || error "Failed to start MDS"
5372 local CHANGELOG_MASK=$(do_facet mgs $LCTL get_param -n $MASK_PARAM)
5373 echo $CHANGELOG_MASK | grep CLOSE > /dev/null &&
5374 error "changelog_mask is not changed"
5378 run_test 76c "verify changelog_mask is applied with set_param -P"
5380 test_76d() { #LU-9399
5383 local xattr_cache="llite.*.xattr_cache"
5384 local cmd="$LCTL get_param -n $xattr_cache | head -1"
5385 local new=$((($(eval $cmd) + 1) % 2))
5387 echo "lctl set_param -P llite.*.xattr_cache=$new"
5388 do_facet mgs $LCTL set_param -P $xattr_cache=$new ||
5389 error "Can't change xattr_cache"
5390 wait_update $HOSTNAME "$cmd" "$new"
5392 echo "Check $xattr_cache on client $MOUNT"
5393 umount_client $MOUNT || error "umount $MOUNT failed"
5394 mount_client $MOUNT || error "mount $MOUNT failed"
5395 [ $(eval $cmd) -eq $new ] ||
5396 error "$xattr_cache != $new on client $MOUNT"
5398 echo "Check $xattr_cache on the new client $MOUNT2"
5399 mount_client $MOUNT2 || error "mount $MOUNT2 failed"
5400 [ $(eval $cmd) -eq $new ] ||
5401 error "$xattr_cache != $new on client $MOUNT2"
5402 umount_client $MOUNT2 || error "umount $MOUNT2 failed"
5406 run_test 76d "verify llite.*.xattr_cache can be set by 'set_param -P' correctly"
5408 test_77() { # LU-3445
5409 local server_version=$(lustre_version_code $SINGLEMDS)
5410 [[ $server_version -ge $(version_code 2.8.55) ]] ||
5411 { skip "Need MDS version 2.8.55+ "; return; }
5413 if [[ -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
5414 is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
5415 skip_env "mixed loopback and real device not working" && return
5418 local fs2mdsdev=$(mdsdevname 1_2)
5419 local fs2ostdev=$(ostdevname 1_2)
5420 local fs2mdsvdev=$(mdsvdevname 1_2)
5421 local fs2ostvdev=$(ostvdevname 1_2)
5422 local fsname=test1234
5424 local failnid="$(h2nettype 1.2.3.4),$(h2nettype 4.3.2.1)"
5426 combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
5428 add fs2mds $(mkfs_opts mds1 $fs2mdsdev) --mgs --fsname=$fsname \
5429 --reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
5430 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT ||
5431 error "start fs2mds failed"
5433 mgsnid=$(do_facet fs2mds $LCTL list_nids | xargs | tr ' ' ,)
5434 mgsnid="0.0.0.0@tcp,$mgsnid,$mgsnid:$mgsnid"
5436 add fs2ost --mgsnode=$mgsnid $(mkfs_opts ost1 $fs2ostdev) \
5437 --failnode=$failnid --fsname=$fsname \
5438 --reformat $fs2ostdev $fs2ostvdev ||
5439 error "add fs2ost failed"
5440 start fs2ost $fs2ostdev $OST_MOUNT_OPTS || error "start fs2ost failed"
5442 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
5443 $MOUNT_CMD $mgsnid:/$fsname $MOUNT2 || error "mount $MOUNT2 failed"
5444 DIR=$MOUNT2 MOUNT=$MOUNT2 check_mount || error "check $MOUNT2 failed"
5447 run_test 77 "comma-separated MGS NIDs and failover node NIDs"
5450 [[ $(facet_fstype $SINGLEMDS) != ldiskfs ||
5451 $(facet_fstype ost1) != ldiskfs ]] &&
5452 skip "ldiskfs only test" && return
5454 # reformat the Lustre filesystem with a smaller size
5455 local saved_MDSCOUNT=$MDSCOUNT
5456 local saved_MDSSIZE=$MDSSIZE
5457 local saved_OSTCOUNT=$OSTCOUNT
5458 local saved_OSTSIZE=$OSTSIZE
5461 MDSSIZE=$((MDSSIZE - 20000))
5462 OSTSIZE=$((OSTSIZE - 20000))
5463 reformat || error "(1) reformat Lustre filesystem failed"
5464 MDSSIZE=$saved_MDSSIZE
5465 OSTSIZE=$saved_OSTSIZE
5467 # mount the Lustre filesystem
5468 setup_noconfig || error "(2) setup Lustre filesystem failed"
5471 log "create test files"
5476 mkdir $MOUNT/$tdir || error "(3) mkdir $MOUNT/$tdir failed"
5478 for i in $(seq $num_files); do
5479 file=$MOUNT/$tdir/$tfile-$i
5480 dd if=/dev/urandom of=$file count=1 bs=1M || {
5481 $LCTL get_param osc.*.cur*grant*
5482 $LFS df; $LFS df -i;
5483 # stop creating files if there is no more space
5484 if [ ! -e $file ]; then
5485 num_files=$((i - 1))
5489 $LFS getstripe -v $file
5490 local ost_idx=$(LFS getstripe -i $file)
5491 do_facet ost$((ost_idx + 1)) \
5492 $LCTL get_param obdfilter.*.*grant*
5493 error "(4) create $file failed"
5497 # unmount the Lustre filesystem
5498 cleanup || error "(5) cleanup Lustre filesystem failed"
5500 # run e2fsck on the MDT and OST devices
5501 local mds_host=$(facet_active_host $SINGLEMDS)
5502 local ost_host=$(facet_active_host ost1)
5503 local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
5504 local ost_dev=$(ostdevname 1)
5506 run_e2fsck $mds_host $mds_dev "-y"
5507 run_e2fsck $ost_host $ost_dev "-y"
5509 # get the original block count of the MDT and OST filesystems
5510 local mds_orig_blks=$(get_block_count $SINGLEMDS $mds_dev)
5511 local ost_orig_blks=$(get_block_count ost1 $ost_dev)
5513 # expand the MDT and OST filesystems to the device size
5514 run_resize2fs $SINGLEMDS $mds_dev "" || error "expand $SINGLEMDS failed"
5515 run_resize2fs ost1 $ost_dev "" || error "expand ost1 failed"
5517 # run e2fsck on the MDT and OST devices again
5518 run_e2fsck $mds_host $mds_dev "-y"
5519 run_e2fsck $ost_host $ost_dev "-y"
5521 # mount the Lustre filesystem
5525 log "check files after expanding the MDT and OST filesystems"
5526 for i in $(seq $num_files); do
5527 file=$MOUNT/$tdir/$tfile-$i
5528 $CHECKSTAT -t file -s 1048576 $file ||
5529 error "(6) checkstat $file failed"
5533 log "create more files after expanding the MDT and OST filesystems"
5534 for i in $(seq $((num_files + 1)) $((num_files + 10))); do
5535 file=$MOUNT/$tdir/$tfile-$i
5536 dd if=/dev/urandom of=$file count=1 bs=1M ||
5537 error "(7) create $file failed"
5540 # unmount the Lustre filesystem
5541 cleanup || error "(8) cleanup Lustre filesystem failed"
5543 # run e2fsck on the MDT and OST devices
5544 run_e2fsck $mds_host $mds_dev "-y"
5545 run_e2fsck $ost_host $ost_dev "-y"
5547 # get the maximum block count of the MDT and OST filesystems
5548 local mds_max_blks=$(get_block_count $SINGLEMDS $mds_dev)
5549 local ost_max_blks=$(get_block_count ost1 $ost_dev)
5551 # get the minimum block count of the MDT and OST filesystems
5552 local mds_min_blks=$(run_resize2fs $SINGLEMDS $mds_dev "" "-P" 2>&1 |
5553 grep minimum | sed -e 's/^.*filesystem: //g')
5554 local ost_min_blks=$(run_resize2fs ost1 $ost_dev "" "-P" 2>&1 |
5555 grep minimum | sed -e 's/^.*filesystem: //g')
5557 # shrink the MDT and OST filesystems to a smaller size
5561 if [[ $mds_max_blks -gt $mds_min_blks &&
5562 $mds_max_blks -gt $mds_orig_blks ]]; then
5563 [[ $mds_orig_blks -gt $mds_min_blks ]] &&
5564 base_blks=$mds_orig_blks || base_blks=$mds_min_blks
5565 new_blks=$(( (mds_max_blks - base_blks) / 2 + base_blks ))
5566 run_resize2fs $SINGLEMDS $mds_dev $new_blks ||
5567 error "shrink $SINGLEMDS to $new_blks failed"
5571 if [[ $ost_max_blks -gt $ost_min_blks &&
5572 $ost_max_blks -gt $ost_orig_blks ]]; then
5573 [[ $ost_orig_blks -gt $ost_min_blks ]] &&
5574 base_blks=$ost_orig_blks || base_blks=$ost_min_blks
5575 new_blks=$(( (ost_max_blks - base_blks) / 2 + base_blks ))
5576 run_resize2fs ost1 $ost_dev $new_blks ||
5577 error "shrink ost1 to $new_blks failed"
5581 # check whether the MDT or OST filesystem was shrunk or not
5583 combined_mgs_mds || stop_mgs || error "(9) stop mgs failed"
5584 reformat || error "(10) reformat Lustre filesystem failed"
5588 # run e2fsck on the MDT and OST devices again
5589 run_e2fsck $mds_host $mds_dev "-y"
5590 run_e2fsck $ost_host $ost_dev "-y"
5592 # mount the Lustre filesystem again
5596 log "check files after shrinking the MDT and OST filesystems"
5597 for i in $(seq $((num_files + 10))); do
5598 file=$MOUNT/$tdir/$tfile-$i
5599 $CHECKSTAT -t file -s 1048576 $file ||
5600 error "(11) checkstat $file failed"
5603 # unmount and reformat the Lustre filesystem
5604 cleanup || error "(12) cleanup Lustre filesystem failed"
5605 combined_mgs_mds || stop_mgs || error "(13) stop mgs failed"
5607 MDSCOUNT=$saved_MDSCOUNT
5608 OSTCOUNT=$saved_OSTCOUNT
5609 reformat || error "(14) reformat Lustre filesystem failed"
5611 run_test 78 "run resize2fs on MDT and OST filesystems"
5613 test_79() { # LU-4227
5614 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.59) ]] ||
5615 { skip "Need MDS version at least 2.5.59"; return 0; }
5617 local mdsdev1=$(mdsdevname 1)
5618 local mdsvdev1=$(mdsvdevname 1)
5619 local mdsdev2=$(mdsdevname 2)
5620 local mdsvdev2=$(mdsvdevname 2)
5621 local ostdev1=$(ostdevname 1)
5622 local ostvdev1=$(ostvdevname 1)
5623 local opts_mds1="$(mkfs_opts mds1 $mdsdev1) --reformat"
5624 local opts_mds2="$(mkfs_opts mds2 $mdsdev2) --reformat"
5625 local opts_ost1="$(mkfs_opts ost1 $ostdev1) --reformat"
5628 # remove --mgs/--mgsnode from mkfs.lustre options
5629 opts_mds1=$(echo $opts_mds1 | sed -e "s/--mgs//")
5631 mgsnode_opt=$(echo $opts_mds2 |
5632 awk '{ for ( i = 1; i < NF; i++ )
5633 if ( $i ~ "--mgsnode" ) { print $i; break } }')
5634 [ -n $mgsnode_opt ] &&
5635 opts_mds2=$(echo $opts_mds2 | sed -e "s/$mgsnode_opt//")
5637 mgsnode_opt=$(echo $opts_ost1 |
5638 awk '{ for ( i = 1; i < NF; i++ )
5639 if ( $i ~ "--mgsnode" ) { print $i; break } }')
5640 [ -n $mgsnode_opt ] &&
5641 opts_ost1=$(echo $opts_ost1 | sed -e "s/$mgsnode_opt//")
5643 # -MGS, format a mdt without --mgs option
5644 add mds1 $opts_mds1 $mdsdev1 $mdsvdev1 &&
5645 error "Must specify --mgs when formatting mdt combined with mgs"
5647 # +MGS, format a mdt/ost without --mgsnode option
5648 add mds1 $(mkfs_opts mds1 $mdsdev1) --reformat $mdsdev1 $mdsvdev1 \
5649 > /dev/null || error "start mds1 failed"
5650 add mds2 $opts_mds2 $mdsdev2 $mdsvdev2 &&
5651 error "Must specify --mgsnode when formatting a mdt"
5652 add ost1 $opts_ost1 $ostdev1 $ostvdev2 &&
5653 error "Must specify --mgsnode when formatting an ost"
5657 run_test 79 "format MDT/OST without mgs option (should return errors)"
5660 start_mds || error "Failed to start MDT"
5661 start_ost || error "Failed to start OST1"
5662 uuid=$(do_facet ost1 $LCTL get_param -n mgc.*.uuid)
5663 #define OBD_FAIL_MGS_PAUSE_TARGET_CON 0x906
5664 do_facet ost1 "$LCTL set_param fail_val=10 fail_loc=0x906"
5665 do_facet mgs "$LCTL set_param fail_val=10 fail_loc=0x906"
5666 do_facet mgs "$LCTL set_param -n mgs/MGS/evict_client $uuid"
5668 start_ost2 || error "Failed to start OST2"
5670 do_facet ost1 "$LCTL set_param fail_loc=0"
5673 run_test 80 "mgc import reconnect race"
5675 #Save the original values of $OSTCOUNT and $OSTINDEX$i.
5677 local new_ostcount=$1
5678 saved_ostcount=$OSTCOUNT
5679 OSTCOUNT=$new_ostcount
5683 for i in $(seq $OSTCOUNT); do
5685 eval saved_ostindex$i=${!index}
5690 # Restore the original values of $OSTCOUNT and $OSTINDEX$i.
5691 restore_ostindex() {
5696 for i in $(seq $OSTCOUNT); do
5697 index=saved_ostindex$i
5698 eval OSTINDEX$i=${!index}
5700 OSTCOUNT=$saved_ostcount
5705 # The main purpose of this test is to ensure the OST_INDEX_LIST functions as
5706 # expected. This test uses OST_INDEX_LIST to format OSTs with a randomly
5707 # assigned index and ensures we can mount such a formatted file system
5708 test_81() { # LU-4665
5709 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
5710 { skip "Need MDS version at least 2.6.54" && return; }
5711 [[ $OSTCOUNT -ge 3 ]] || { skip_env "needs >= 3 OSTs" && return; }
5715 # Each time RANDOM is referenced, a random integer between 0 and 32767
5718 local saved_ostindex1=$OSTINDEX1
5719 for i in 65535 $((RANDOM + 65536)); do
5720 echo -e "\nFormat ost1 with --index=$i, should fail"
5722 if add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --reformat \
5723 $(ostdevname 1) $(ostvdevname 1); then
5724 OSTINDEX1=$saved_ostindex1
5725 error "format ost1 with --index=$i should fail"
5728 OSTINDEX1=$saved_ostindex1
5732 # Format OSTs with random sparse indices.
5733 trap "restore_ostindex" EXIT
5734 echo -e "\nFormat $OSTCOUNT OSTs with sparse indices"
5735 OST_INDEX_LIST=[0,$((RANDOM * 2 % 65533 + 1)),65534] formatall
5737 # Setup and check Lustre filesystem.
5738 start_mgsmds || error "start_mgsmds failed"
5739 for i in $(seq $OSTCOUNT); do
5740 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS ||
5741 error "start ost$i failed"
5744 mount_client $MOUNT || error "mount client $MOUNT failed"
5745 check_mount || error "check client $MOUNT failed"
5748 local max_easize=$($LCTL get_param -n llite.*.max_easize)
5749 [[ $max_easize -eq 128 ]] ||
5750 error "max_easize is $max_easize, should be 128 bytes"
5754 run_test 81 "sparse OST indexing"
5756 # Here we exercise the stripe placement functionality on a file system that
5757 # has formatted the OST with a random index. With the file system the following
5758 # functionality is tested:
5760 # 1. Creating a new file with a specific stripe layout.
5762 # 2. Modifiy a existing empty file with a specific stripe layout.
5764 # 3. Ensure we fail to set the stripe layout of a file that already has one.
5766 # 4. If ost-index is defined we need to ensure it is the first entry in the
5767 # ost index list returned by lfs getstripe.
5769 # 5. Lastly ensure this functionality fails with directories.
5770 test_82a() { # LU-4665
5771 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
5772 { skip "Need MDS version at least 2.6.54" && return; }
5773 [[ $OSTCOUNT -ge 3 ]] || { skip_env "needs >= 3 OSTs" && return; }
5779 # Format OSTs with random sparse indices.
5783 local LOV_V1_INSANE_STRIPE_COUNT=65532
5784 for i in $(seq $OSTCOUNT); do
5785 index=$(((RANDOM * 2) % LOV_V1_INSANE_STRIPE_COUNT))
5786 ost_indices+=" $index"
5788 ost_indices=$(comma_list $ost_indices)
5790 trap "restore_ostindex" EXIT
5791 echo -e "\nFormat $OSTCOUNT OSTs with sparse indices $ost_indices"
5792 OST_INDEX_LIST=[$ost_indices] formatall
5794 # Setup Lustre filesystem.
5795 start_mgsmds || error "start_mgsmds failed"
5796 for i in $(seq $OSTCOUNT); do
5797 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS ||
5798 error "start ost$i failed"
5801 mount_client $MOUNT || error "mount client $MOUNT failed"
5804 $LFS df $MOUNT || error "$LFS df $MOUNT failed"
5805 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
5807 # 1. If the file does not exist, new file will be created
5808 # with specified OSTs.
5809 local file=$DIR/$tdir/$tfile-1
5810 local cmd="$SETSTRIPE -o $ost_indices $file"
5812 eval $cmd || error "$cmd failed"
5813 check_stripe_count $file $OSTCOUNT
5814 check_obdidx $file $ost_indices
5815 dd if=/dev/urandom of=$file count=1 bs=1M > /dev/null 2>&1 ||
5816 error "write $file failed"
5818 # 2. If the file already exists and is an empty file, the file
5819 # will be attached with specified layout.
5820 file=$DIR/$tdir/$tfile-2
5821 mcreate $file || error "mcreate $file failed"
5822 cmd="$SETSTRIPE -o $ost_indices $file"
5824 eval $cmd || error "$cmd failed"
5825 dd if=/dev/urandom of=$file count=1 bs=1M > /dev/null 2>&1 ||
5826 error "write $file failed"
5827 check_stripe_count $file $OSTCOUNT
5828 check_obdidx $file $ost_indices
5830 # 3. If the file already has a valid layout attached, the command
5831 # should fail with EBUSY.
5833 eval $cmd && error "stripe is already set on $file, $cmd should fail"
5835 # 4. If [--stripe-index|-i <start_ost_idx>] is used, the index must
5836 # be in the OST indices list.
5837 local start_ost_idx=${ost_indices##*,}
5838 file=$DIR/$tdir/$tfile-3
5839 cmd="$SETSTRIPE -o $ost_indices -i $start_ost_idx $file"
5841 eval $cmd || error "$cmd failed"
5842 check_stripe_count $file $OSTCOUNT
5843 check_obdidx $file $ost_indices
5844 check_start_ost_idx $file $start_ost_idx
5846 file=$DIR/$tdir/$tfile-4
5848 cmd+=" -o $(exclude_items_from_list $ost_indices $start_ost_idx)"
5849 cmd+=" -i $start_ost_idx $file"
5851 eval $cmd && error "index $start_ost_idx should be in $ost_indices"
5853 # 5. Specifying OST indices for directory should fail with ENOSUPP.
5854 local dir=$DIR/$tdir/$tdir
5855 mkdir $dir || error "mkdir $dir failed"
5856 cmd="$SETSTRIPE -o $ost_indices $dir"
5858 eval $cmd && error "$cmd should fail, specifying OST indices" \
5859 "for directory is not supported"
5863 run_test 82a "specify OSTs for file (succeed) or directory (fail)"
5868 # Remove OSTs from a pool and destroy the pool.
5869 destroy_pool $ost_pool || true
5874 # Test 82b is run to ensure that if the user supplies a pool with a specific
5875 # stripe layout that it behaves proprerly. It should fail in the case that
5876 # the supplied OST index list points to OSTs not contained in the user
5878 test_82b() { # LU-4665
5879 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
5880 { skip "Need MDS version at least 2.6.54" && return; }
5881 [[ $OSTCOUNT -ge 4 ]] || { skip_env "needs >= 4 OSTs" && return; }
5887 # Format OSTs with random sparse indices.
5891 local LOV_V1_INSANE_STRIPE_COUNT=65532
5892 for i in $(seq $OSTCOUNT); do
5893 index=$(((RANDOM * 2) % LOV_V1_INSANE_STRIPE_COUNT))
5894 ost_indices+=" $index"
5896 ost_indices=$(comma_list $ost_indices)
5898 trap "restore_ostindex" EXIT
5899 echo -e "\nFormat $OSTCOUNT OSTs with sparse indices $ost_indices"
5900 OST_INDEX_LIST=[$ost_indices] formatall
5902 # Setup Lustre filesystem.
5903 start_mgsmds || error "start_mgsmds failed"
5904 for i in $(seq $OSTCOUNT); do
5905 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS ||
5906 error "start ost$i failed"
5909 mount_client $MOUNT || error "mount client $MOUNT failed"
5911 $LFS df $MOUNT || error "$LFS df $MOUNT failed"
5912 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
5914 # Create a new pool and add OSTs into it.
5915 local ost_pool=$FSNAME.$TESTNAME
5916 create_pool $ost_pool || error "create OST pool $ost_pool failed"
5919 trap "cleanup_82b" EXIT
5921 local ost_idx_in_list=${ost_indices##*,}
5922 local ost_idx_in_pool=$(exclude_items_from_list $ost_indices \
5925 local ost_targets="$FSNAME-OST["
5926 for i in ${ost_idx_in_pool//,/ }; do
5927 ost_targets=$ost_targets$(printf "%04x," $i)
5929 ost_targets="${ost_targets%,}]"
5931 local ost_targets_uuid=$(for i in ${ost_idx_in_pool//,/ }; \
5932 do printf "$FSNAME-OST%04x_UUID\n" $i; done |
5933 sort -u | tr '\n' ' ')
5935 local cmd="$LCTL pool_add $ost_pool $ost_targets"
5936 do_facet mgs $cmd || error "$cmd failed"
5937 wait_update $HOSTNAME "$LCTL get_param -n lov.$FSNAME-*.pools.$TESTNAME|
5938 sort -u | tr '\n' ' ' " "$ost_targets_uuid" ||
5939 error "wait_update $ost_pool failed"
5940 wait_update_facet $SINGLEMDS "$LCTL pool_list $ost_pool | wc -l" 4 ||
5941 error "wait_update pool_list $ost_pool failed"
5943 # If [--pool|-p <pool_name>] is set with [--ost-list|-o <ost_indices>],
5944 # then the OSTs must be the members of the pool.
5945 local file=$DIR/$tdir/$tfile
5946 cmd="$SETSTRIPE -p $ost_pool -o $ost_idx_in_list $file"
5948 eval $cmd && error "OST with index $ost_idx_in_list should be" \
5949 "in OST pool $ost_pool"
5951 # Only select OST $ost_idx_in_list from $ost_pool for file.
5952 ost_idx_in_list=${ost_idx_in_pool#*,}
5953 cmd="$SETSTRIPE -p $ost_pool -o $ost_idx_in_list $file"
5955 eval $cmd || error "$cmd failed"
5956 cmd="$GETSTRIPE $file"
5958 eval $cmd || error "$cmd failed"
5959 check_stripe_count $file 2
5960 check_obdidx $file $ost_idx_in_list
5961 dd if=/dev/urandom of=$file count=1 bs=1M > /dev/null 2>&1 ||
5962 error "write $file failed"
5966 run_test 82b "specify OSTs for file with --pool and --ost-list options"
5969 [[ $(lustre_version_code ost1) -ge $(version_code 2.6.91) ]] ||
5970 { skip "Need OST version at least 2.6.91" && return 0; }
5971 if [ $(facet_fstype ost1) != ldiskfs ]; then
5972 skip "ldiskfs only test"
5982 ostmnt=$(facet_mntpt ost1)
5983 fstype=$(facet_fstype ost1)
5985 # Mount the OST as an ldiskfs filesystem.
5986 log "mount the OST $dev as a $fstype filesystem"
5987 add ost1 $(mkfs_opts ost1 $dev) $FSTYPE_OPT \
5988 --reformat $dev > /dev/null ||
5989 error "format ost1 error"
5991 if ! test -b $dev; then
5992 mnt_opts=$(csa_add "$OST_MOUNT_OPTS" -o loop)
5994 echo "mnt_opts $mnt_opts"
5995 do_facet ost1 mount -t $fstype $dev \
5997 # Run llverfs on the mounted ldiskfs filesystem.
5998 # It is needed to get ENOSPACE.
5999 log "run llverfs in partial mode on the OST $fstype $ostmnt"
6000 do_rpc_nodes $(facet_host ost1) run_llverfs $ostmnt -vpl \
6001 "no" || error "run_llverfs error on $fstype"
6004 log "unmount the OST $dev"
6007 # Delete file IO_scrub. Later osd_scrub_setup will try to
6008 # create "IO_scrub" but will get ENOSPACE.
6010 echo "start ost1 service on `facet_active_host ost1`"
6011 start ost1 `ostdevname 1` $OST_MOUNT_OPTS
6014 err=$(do_facet ost1 dmesg | grep "VFS: Busy inodes after unmount of")
6015 echo "string err $err"
6016 [ -z "$err" ] || error $err
6019 run_test 83 "ENOSPACE on OST doesn't cause message VFS: \
6020 Busy inodes after unmount ..."
6023 local facet=$SINGLEMDS
6024 local num=$(echo $facet | tr -d "mds")
6025 local dev=$(mdsdevname $num)
6026 local time_min=$(recovery_time_min)
6027 local recovery_duration
6028 local completed_clients
6029 local correct_clients
6032 echo "start mds service on $(facet_active_host $facet)"
6034 "-o recovery_time_hard=$time_min,recovery_time_soft=$time_min" $@ ||
6035 error "start MDS failed"
6037 start_ost || error "start OST0000 failed"
6038 start_ost2 || error "start OST0001 failed"
6040 echo "recovery_time=$time_min, timeout=$TIMEOUT, wrap_up=$wrap_up"
6042 mount_client $MOUNT1 || error "mount $MOUNT1 failed"
6043 mount_client $MOUNT2 || error "mount $MOUNT2 failed"
6044 # make sure new superblock labels are sync'd before disabling writes
6048 replay_barrier $SINGLEMDS
6049 createmany -o $DIR1/$tfile-%d 1000
6051 # We need to catch the end of recovery window to extend it.
6052 # Skip 5 requests and add delay to request handling.
6053 #define OBD_FAIL_TGT_REPLAY_DELAY 0x709 | FAIL_SKIP
6054 do_facet $SINGLEMDS "lctl set_param fail_loc=0x20000709 fail_val=5"
6056 facet_failover --fsck $SINGLEMDS || error "failover: $?"
6059 echo "recovery status"
6060 do_facet $SINGLEMDS \
6061 "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status"
6063 recovery_duration=$(do_facet $SINGLEMDS \
6064 "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status" |
6065 awk '/recovery_duration/ { print $2 }')
6066 (( $recovery_duration > $time_min + $wrap_up )) &&
6067 error "recovery_duration > recovery_time_hard + wrap up"
6068 completed_clients=$(do_facet $SINGLEMDS \
6069 "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status" |
6070 awk '/completed_clients/ { print $2 }')
6072 correct_clients="$MDSCOUNT/$((MDSCOUNT+1))"
6073 [ "$completed_clients" = "${correct_clients}" ] ||
6074 error "$completed_clients != $correct_clients"
6076 do_facet $SINGLEMDS "lctl set_param fail_loc=0"
6077 umount_client $MOUNT1
6078 umount_client $MOUNT2
6084 run_test 84 "check recovery_hard_time"
6087 [[ $(lustre_version_code ost1) -ge $(version_code 2.7.55) ]] ||
6088 { skip "Need OST version at least 2.7.55" && return 0; }
6089 ##define OBD_FAIL_OSD_OST_EA_FID_SET 0x197
6090 do_facet ost1 "lctl set_param fail_loc=0x197"
6094 run_test 85 "osd_ost init: fail ea_fid_set"
6099 # ost1 has already registered to the MGS before the reformat.
6100 # So after reformatting it with option "-G", it could not be
6101 # mounted to the MGS. Cleanup the system for subsequent tests.
6106 local server_version=$(lustre_version_code $SINGLEMDS)
6107 [ "$(facet_fstype ost1)" = "zfs" ] &&
6108 skip "LU-6442: no such mkfs params for ZFS OSTs" && return
6109 [[ $server_version -ge $(version_code 2.7.56) ]] ||
6110 { skip "Need server version newer than 2.7.55"; return 0; }
6112 local OST_OPTS="$(mkfs_opts ost1 $(ostdevname 1)) \
6113 --reformat $(ostdevname 1) $(ostvdevname 1)"
6116 local OLDSIZE=$(do_facet ost1 "$DEBUGFS -c -R stats $(ostdevname 1)" |
6117 awk '/Flex block group size: / { print $NF; exit; }')
6120 if [[ ${!opts} != *mkfsoptions* ]]; then
6121 eval opts=\"${!opts} \
6122 --mkfsoptions='\\\"-O flex_bg -G $NEWSIZE\\\"'\"
6124 val=${!opts//--mkfsoptions=\\\"/ \
6125 --mkfsoptions=\\\"-O flex_bg -G $NEWSIZE }
6129 echo "params: $opts"
6131 trap cleanup_86 EXIT ERR
6134 add ost1 $opts || error "add ost1 failed with new params"
6136 local FOUNDSIZE=$(do_facet ost1 "$DEBUGFS -c -R stats $(ostdevname 1)" |
6137 awk '/Flex block group size: / { print $NF; exit; }')
6139 [[ $FOUNDSIZE == $NEWSIZE ]] ||
6140 error "Flex block group size: $FOUNDSIZE, expected: $NEWSIZE"
6144 run_test 86 "Replacing mkfs.lustre -G option"
6146 test_87() { #LU-6544
6147 [[ $(lustre_version_code $SINGLEMDS1) -ge $(version_code 2.9.51) ]] ||
6148 { skip "Need MDS version at least 2.9.51" && return; }
6149 [[ $(facet_fstype $SINGLEMDS) != ldiskfs ]] &&
6150 { skip "ldiskfs only test" && return; }
6151 [[ $OSTCOUNT -gt 59 ]] &&
6152 { skip "Ignore wide striping situation" && return; }
6154 local mdsdev=$(mdsdevname 1)
6155 local mdsvdev=$(mdsvdevname 1)
6156 local file=$DIR/$tfile
6157 local mntpt=$(facet_mntpt $SINGLEMDS)
6158 local used_xattr_blk=0
6159 local inode_size=${1:-1024}
6161 local xtest="trusted.test"
6165 local stripe_cnt=$(($OSTCOUNT + 2))
6167 #Please see ldiskfs_make_lustre() for MDT inode size calculation
6168 if [ $stripe_cnt -gt 16 ]; then
6171 left_size=$(expr $inode_size - \
6174 32 - 40 \* 3 - 32 \* 3 - $stripe_cnt \* 24 - 16 - 3 - \
6176 24 - 18 - $(expr length $tfile) - 16 - 4)
6177 if [ $left_size -le 0 ]; then
6178 echo "No space($left_size) is expected in inode."
6179 echo "Try 1-byte xattr instead to verify this."
6182 echo "Estimate: at most $left_size-byte space left in inode."
6188 add mds1 $(mkfs_opts mds1 ${mdsdev}) --stripe-count-hint=$stripe_cnt \
6189 --reformat $mdsdev $mdsvdev || error "add mds1 failed"
6190 start_mdt 1 > /dev/null || error "start mdt1 failed"
6191 for i in $(seq $OSTCOUNT); do
6192 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS > /dev/null ||
6193 error "start ost$i failed"
6195 mount_client $MOUNT > /dev/null || error "mount client $MOUNT failed"
6196 check_mount || error "check client $MOUNT failed"
6199 $SETSTRIPE -E 1M -c 1 -E 64M -c 1 -E -1 -c -1 $file ||
6200 error "Create file with 3 components failed"
6201 $TRUNCATE $file $((1024*1024*64+1)) || error "truncate file failed"
6202 i=$($GETSTRIPE -I3 -c $file) || error "get 3rd stripe count failed"
6203 if [ $i -ne $OSTCOUNT ]; then
6204 left_size=$(expr $left_size + $(expr $OSTCOUNT - $i) \* 24)
6205 echo -n "Since only $i out $OSTCOUNT OSTs are used, "
6206 echo -n "the expected left space is changed to "
6207 echo "$left_size bytes at most."
6209 value=$(generate_string $left_size)
6210 setfattr -n $xtest -v $value $file
6211 orig=$(get_xattr_value $xtest $file)
6212 [[ "$orig" != "$value" ]] && error "$xtest changed"
6214 #Verify if inode has some expected space left
6215 umount $MOUNT > /dev/null || error "umount $MOUNT failed"
6216 stop_mdt 1 > /dev/null || error "stop mdt1 failed"
6217 mount_ldiskfs $SINGLEMDS || error "mount -t ldiskfs $SINGLEMDS failed"
6219 do_facet $SINGLEMDS ls -sal $mntpt/ROOT/$tfile
6220 used_xattr_blk=$(do_facet $SINGLEMDS ls -s $mntpt/ROOT/$tfile |
6222 [[ $used_xattr_blk -eq 0 ]] &&
6223 error "Please check MDS inode size calculation: \
6224 more than $left_size-byte space left in inode."
6225 echo "Verified: at most $left_size-byte space left in inode."
6229 run_test 87 "check if MDT inode can hold EAs with N stripes properly"
6232 [ "$(facet_fstype mds1)" == "zfs" ] &&
6233 skip "LU-6662: no implementation for ZFS" && return
6237 add mds1 $(mkfs_opts mds1 $(mdsdevname 1)) \
6238 --reformat $(mdsdevname 1) || error "add mds1 failed"
6240 do_facet mds1 "$TUNEFS $(mdsdevname 1) |
6241 grep -e \".*opts:.*errors=remount-ro.*\"" ||
6242 error "default mount options is missing"
6244 add mds1 $(mkfs_opts mds1 $(mdsdevname 1)) \
6245 --mountfsoptions="user_xattr,errors=panic" \
6246 --reformat $(mdsdevname 1) || error "add mds1 failed"
6248 do_facet mds1 "$TUNEFS $(mdsdevname 1) |
6249 grep -e \".*opts:.*errors=panic.*\"" ||
6250 error "user can't override default mount options"
6252 run_test 88 "check the default mount options can be overridden"
6254 test_89() { # LU-7131
6255 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.9.54) ]] ||
6256 { skip "Need MDT version at least 2.9.54" && return 0; }
6258 local key=failover.node
6259 local val1=192.0.2.254@tcp0 # Reserved IPs, see RFC 5735
6260 local val2=192.0.2.255@tcp0
6261 local mdsdev=$(mdsdevname 1)
6266 [ $(facet_fstype mds1) == zfs ] && import_zpool mds1
6267 # Check that parameters are added correctly
6268 echo "tunefs --param $key=$val1"
6269 do_facet mds "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
6270 error "tunefs --param $key=$val1 failed"
6271 params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
6272 error "tunefs --dryrun failed"
6273 params=${params##*Parameters:}
6274 params=${params%%exiting*}
6275 [ $(echo $params | tr ' ' '\n' | grep -c $key=$val1) = "1" ] ||
6276 error "on-disk parameter not added correctly via tunefs"
6278 # Check that parameters replace existing instances when added
6279 echo "tunefs --param $key=$val2"
6280 do_facet mds "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
6281 error "tunefs --param $key=$val2 failed"
6282 params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
6283 error "tunefs --dryrun failed"
6284 params=${params##*Parameters:}
6285 params=${params%%exiting*}
6286 [ $(echo $params | tr ' ' '\n' | grep -c $key=) = "1" ] ||
6287 error "on-disk parameter not replaced via tunefs"
6288 [ $(echo $params | tr ' ' '\n' | grep -c $key=$val2) = "1" ] ||
6289 error "on-disk parameter not replaced correctly via tunefs"
6291 # Check that a parameter is erased properly
6292 echo "tunefs --erase-param $key"
6293 do_facet mds "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
6294 error "tunefs --erase-param $key failed"
6295 params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
6296 error "tunefs --dryrun failed"
6297 params=${params##*Parameters:}
6298 params=${params%%exiting*}
6299 [ $(echo $params | tr ' ' '\n' | grep -c $key=) = "0" ] ||
6300 error "on-disk parameter not erased correctly via tunefs"
6302 # Check that all the parameters are erased
6303 echo "tunefs --erase-params"
6304 do_facet mds "$TUNEFS --erase-params $mdsdev >/dev/null" ||
6305 error "tunefs --erase-params failed"
6306 params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
6307 error "tunefs --dryrun failed"
6308 params=${params##*Parameters:}
6309 params=${params%%exiting*}
6311 error "all on-disk parameters not erased correctly via tunefs"
6313 # Check the order of options --erase-params and --param
6314 echo "tunefs --param $key=$val1 --erase-params"
6316 "$TUNEFS --param $key=$val1 --erase-params $mdsdev >/dev/null"||
6317 error "tunefs --param $key=$val1 --erase-params failed"
6318 params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
6319 error "tunefs --dryrun failed"
6320 params=${params##*Parameters:}
6321 params=${params%%exiting*}
6322 [ $(echo $params | tr ' ' '\n') == "$key=$val1" ] ||
6323 error "on-disk param not added correctly with --erase-params"
6327 run_test 89 "check tunefs --param and --erase-param{s} options"
6330 # $2 (optional) value of max_mod_rpcs_in_flight to set
6331 check_max_mod_rpcs_in_flight() {
6339 idx=$(printf "%04x" $($LFS getdirstripe -i $dir))
6340 facet="mds$((0x$idx + 1))"
6342 if [ -z "$mmr" ]; then
6343 # get value of max_mod_rcps_in_flight
6344 mmr=$($LCTL get_param -n \
6345 mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight) ||
6346 error "Unable to get max_mod_rpcs_in_flight"
6347 echo "max_mod_rcps_in_flight is $mmr"
6349 # set value of max_mod_rpcs_in_flight
6351 mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight=$mmr ||
6352 error "Unable to set max_mod_rpcs_in_flight to $mmr"
6353 echo "max_mod_rpcs_in_flight set to $mmr"
6356 # create mmr+1 files
6357 echo "creating $((mmr + 1)) files ..."
6359 for i in $(seq $((mmr + 1))); do
6365 # consumes mmr-1 modify RPC slots
6366 #define OBD_FAIL_MDS_REINT_MULTI_NET 0x159
6367 # drop requests on MDT so that RPC slots are consumed
6368 # during all the request resend interval
6369 do_facet $facet "$LCTL set_param fail_loc=0x159"
6370 echo "launch $((mmr - 1)) chmod in parallel ..."
6371 for i in $(seq $((mmr - 1))); do
6372 chmod 0600 $dir/file-$i &
6376 # send one additional modify RPC
6377 do_facet $facet "$LCTL set_param fail_loc=0"
6378 echo "launch 1 additional chmod in parallel ..."
6379 chmod 0600 $dir/file-$mmr &
6382 # check this additional modify RPC get a modify RPC slot
6383 # and succeed its operation
6384 checkstat -vp 0600 $dir/file-$mmr ||
6385 error "Unable to send $mmr modify RPCs in parallel"
6390 # consumes mmr modify RPC slots
6391 #define OBD_FAIL_MDS_REINT_MULTI_NET 0x159
6392 # drop requests on MDT so that RPC slots are consumed
6393 # during all the request resend interval
6394 do_facet $facet "$LCTL set_param fail_loc=0x159"
6395 echo "launch $mmr chmod in parallel ..."
6396 for i in $(seq $mmr); do
6397 chmod 0666 $dir/file-$i &
6401 # send one additional modify RPC
6402 do_facet $facet "$LCTL set_param fail_loc=0"
6403 echo "launch 1 additional chmod in parallel ..."
6404 chmod 0666 $dir/file-$((mmr + 1)) &
6407 # check this additional modify RPC blocked getting a modify RPC slot
6408 checkstat -vp 0644 $dir/file-$((mmr + 1)) ||
6409 error "Unexpectedly send $(($mmr + 1)) modify RPCs in parallel"
6415 if ! combined_mgs_mds ; then
6420 [[ $($LCTL get_param mdc.*.import |
6421 grep "connect_flags:.*multi_mod_rpc") ]] ||
6422 { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
6424 # check default value
6425 $LFS mkdir -c1 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
6426 check_max_mod_rpcs_in_flight $DIR/$tdir
6430 run_test 90a "check max_mod_rpcs_in_flight is enforced"
6440 [[ $($LCTL get_param mdc.*.import |
6441 grep "connect_flags:.*multi_mod_rpc") ]] ||
6442 { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
6445 # update max_mod_rpcs_in_flight
6446 $LFS mkdir -c1 $DIR/${tdir}1 || error "mkdir $DIR/${tdir}1 failed"
6447 check_max_mod_rpcs_in_flight $DIR/${tdir}1 1
6450 # check client is able to send multiple modify RPCs in paralell
6451 tmp=$($LCTL get_param -n mdc.$FSNAME-MDT*-mdc-*.import |
6452 grep -c "multi_mod_rpcs")
6453 if [ "$tmp" -ne $MDSCOUNT ]; then
6454 echo "Client not able to send multiple modify RPCs in parallel"
6459 # update max_mod_rpcs_in_flight
6460 $LFS mkdir -c1 $DIR/${tdir}2 || error "mkdir $DIR/${tdir}2 failed"
6461 check_max_mod_rpcs_in_flight $DIR/${tdir}2 5
6464 $LFS mkdir -c1 $DIR/${tdir}3 || error "mkdir $DIR/${tdir}3 failed"
6465 idx=$(printf "%04x" $($LFS getdirstripe -i $DIR/${tdir}3))
6466 facet="mds$((0x$idx + 1))"
6468 # save MDT max_mod_rpcs_per_client
6469 mmrpc=$(do_facet $facet \
6470 cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
6472 # update max_mod_rpcs_in_flight
6473 umount_client $MOUNT
6475 "echo 16 > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
6477 $LCTL set_param mdc.$FSNAME-MDT$idx-mdc-*.max_rpcs_in_flight=17
6478 check_max_mod_rpcs_in_flight $DIR/${tdir}3 16
6480 # restore MDT max_mod_rpcs_per_client initial value
6482 "echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
6484 rm -rf $DIR/${tdir}?
6487 run_test 90b "check max_mod_rpcs_in_flight is enforced after update"
6496 [[ $($LCTL get_param mdc.*.import |
6497 grep "connect_flags:.*multi_mod_rpc") ]] ||
6498 { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
6500 # check client is able to send multiple modify RPCs in paralell
6501 tmp=$($LCTL get_param -n mdc.$FSNAME-MDT*-mdc-*.import |
6502 grep -c "multi_mod_rpcs")
6503 if [ "$tmp" -ne $MDSCOUNT ]; then
6504 skip "Client not able to send multiple modify RPCs in parallel"
6509 # get max_rpcs_in_flight value
6510 mrif=$($LCTL get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
6511 echo "max_rpcs_in_flight is $mrif"
6513 # get MDT max_mod_rpcs_per_client
6514 mmrpc=$(do_facet mds1 \
6515 cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
6516 echo "max_mod_rpcs_per_client is $mmrpc"
6519 # attempt to set max_mod_rpcs_in_flight to max_rpcs_in_flight value
6520 # prerequisite: set max_mod_rpcs_per_client to max_rpcs_in_flight value
6521 umount_client $MOUNT
6523 "echo $mrif > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
6527 mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif &&
6528 error "set max_mod_rpcs_in_flight to $mrif should fail"
6530 umount_client $MOUNT
6532 "echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
6536 # attempt to set max_mod_rpcs_in_flight to max_mod_rpcs_per_client+1
6537 # prerequisite: set max_rpcs_in_flight to max_mod_rpcs_per_client+2
6539 mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc + 2))
6542 mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc + 1)) &&
6543 error "set max_mod_rpcs_in_flight to $((mmrpc + 1)) should fail"
6547 run_test 90c "check max_mod_rpcs_in_flight update limits"
6558 [[ $($LCTL get_param mdc.*.import |
6559 grep "connect_flags:.*multi_mod_rpc") ]] ||
6560 { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
6562 $LFS mkdir -c1 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
6563 idx=$(printf "%04x" $($LFS getdirstripe -i $DIR/$tdir))
6564 facet="mds$((0x$idx + 1))"
6566 # check client version supports multislots
6567 tmp=$($LCTL get_param -N \
6568 mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight)
6569 if [ -z "$tmp" ]; then
6570 skip "Client does not support multiple modify RPCs in flight"
6575 # get current value of max_mod_rcps_in_flight
6576 mmr=$($LCTL get_param -n \
6577 mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight)
6578 echo "max_mod_rcps_in_flight is $mmr"
6581 echo "creating $mmr files ..."
6583 for i in $(seq $mmr); do
6584 touch $DIR/$tdir/file-$i
6587 # prepare for close RPC
6588 multiop_bg_pause $DIR/$tdir/file-close O_c
6591 # consumes mmr modify RPC slots
6592 #define OBD_FAIL_MDS_REINT_MULTI_NET 0x159
6593 # drop requests on MDT so that RPC slots are consumed
6594 # during all the request resend interval
6595 do_facet $facet "$LCTL set_param fail_loc=0x159"
6596 echo "launch $mmr chmod in parallel ..."
6597 for i in $(seq $mmr); do
6598 chmod 0600 $DIR/$tdir/file-$i &
6601 # send one additional close RPC
6602 do_facet $facet "$LCTL set_param fail_loc=0"
6603 echo "launch 1 additional close in parallel ..."
6605 cancel_lru_locks mdc
6608 # check this additional close RPC get a modify RPC slot
6609 # and multiop process completed
6610 [ -d /proc/$pid ] &&
6611 error "Unable to send the additional close RPC in parallel"
6616 run_test 90d "check one close RPC is allowed above max_mod_rpcs_in_flight"
6618 check_uuid_on_ost() {
6620 do_facet ost1 "$LCTL get_param obdfilter.${FSNAME}*.exports.'$nid'.uuid"
6623 check_uuid_on_mdt() {
6625 do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.'$nid'.uuid"
6633 [[ $(lustre_version_code ost1) -ge $(version_code 2.7.63) ]] ||
6634 { skip "Need OST version at least 2.7.63" && return 0; }
6635 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.63) ]] ||
6636 { skip "Need MDT version at least 2.7.63" && return 0; }
6638 start_mds || error "MDS start failed"
6639 start_ost || error "unable to start OST"
6640 mount_client $MOUNT || error "client start failed"
6641 check_mount || error "check_mount failed"
6644 nid=$($LCTL list_nids | head -1 | sed "s/\./\\\./g")
6648 uuid=$(get_client_uuid $MOUNT)
6650 echo "list nids on mdt:"
6651 do_facet $SINGLEMDS "$LCTL list_param mdt.${FSNAME}*.exports.*"
6652 echo "uuid from $nid:"
6653 do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.'$nid'.uuid"
6655 found=$(check_uuid_on_mdt $nid | grep $uuid)
6656 [ -z "$found" ] && error "can't find $uuid $nid on MDT"
6657 found=$(check_uuid_on_ost $nid | grep $uuid)
6658 [ -z "$found" ] && error "can't find $uuid $nid on OST"
6660 # umount the client so it won't reconnect
6661 manual_umount_client --force || error "failed to umount $?"
6662 # shouldn't disappear on MDS after forced umount
6663 found=$(check_uuid_on_mdt $nid | grep $uuid)
6664 [ -z "$found" ] && error "can't find $uuid $nid"
6667 do_facet $SINGLEMDS \
6668 "$LCTL set_param -n mdt.${mds1_svc}.evict_client nid:$nid"
6670 found=$(check_uuid_on_mdt $nid | grep $uuid)
6671 [ -n "$found" ] && error "found $uuid $nid on MDT"
6672 found=$(check_uuid_on_ost $nid | grep $uuid)
6673 [ -n "$found" ] && error "found $uuid $nid on OST"
6675 # check it didn't reconnect (being umounted)
6676 sleep $((TIMEOUT+1))
6677 found=$(check_uuid_on_mdt $nid | grep $uuid)
6678 [ -n "$found" ] && error "found $uuid $nid on MDT"
6679 found=$(check_uuid_on_ost $nid | grep $uuid)
6680 [ -n "$found" ] && error "found $uuid $nid on OST"
6684 run_test 91 "evict-by-nid support"
6686 generate_ldev_conf() {
6687 # generate an ldev.conf file
6688 local ldevconfpath=$1
6690 local fsldevformat=""
6693 fstype=$(facet_fstype mgs)
6694 if [ "$fstype" == "zfs" ]; then
6695 fsldevformat="$fstype:"
6700 printf "%s\t-\t%s-MGS0000\t%s%s\n" \
6704 $(mgsdevname) > $ldevconfpath
6706 local mdsfo_host=$mdsfailover_HOST;
6707 if [ -z "$mdsfo_host" ]; then
6711 for num in $(seq $MDSCOUNT); do
6712 fstype=$(facet_fstype mds$num)
6713 if [ "$fstype" == "zfs" ]; then
6714 fsldevformat="$fstype:"
6719 printf "%s\t%s\t%s-MDT%04d\t%s%s\n" \
6725 $(mdsdevname $num) >> $ldevconfpath
6728 local ostfo_host=$ostfailover_HOST;
6729 if [ -z "$ostfo_host" ]; then
6733 for num in $(seq $OSTCOUNT); do
6734 fstype=$(facet_fstype ost$num)
6735 if [ "$fstype" == "zfs" ]; then
6736 fsldevformat="$fstype:"
6741 printf "%s\t%s\t%s-OST%04d\t%s%s\n" \
6747 $(ostdevname $num) >> $ldevconfpath
6750 echo "----- $ldevconfpath -----"
6752 echo "--- END $ldevconfpath ---"
6757 # generate a nids file (mapping between hostname to nid)
6758 # looks like we only have the MGS nid available to us
6759 # so just echo that to a file
6761 echo -e "${mgs_HOST}\t${MGSNID}" > $nidspath
6763 echo "----- $nidspath -----"
6765 echo "--- END $nidspath ---"
6768 compare_ldev_output() {
6772 sort $expected_output -o $expected_output
6773 sort $ldev_output -o $ldev_output
6775 echo "-- START OF LDEV OUTPUT --"
6777 echo "--- END OF LDEV OUTPUT ---"
6779 echo "-- START OF EXPECTED OUTPUT --"
6780 cat $expected_output
6781 echo "--- END OF EXPECTED OUTPUT ---"
6783 diff $expected_output $ldev_output
6788 if [ -z "$LDEV" ]; then
6789 error "ldev is missing!"
6792 local LDEVCONFPATH=$TMP/ldev.conf
6793 local NIDSPATH=$TMP/nids
6795 echo "Host is $(hostname)"
6797 generate_ldev_conf $LDEVCONFPATH
6798 generate_nids $NIDSPATH
6800 # echo the mgs nid and compare it to environment variable MGSNID
6801 # also, ldev.conf and nids is a server side thing, use the OSS
6804 output=$($LDEV -c $LDEVCONFPATH -H $ost_HOST -n $NIDSPATH echo %m)
6806 echo "-- START OF LDEV OUTPUT --"
6808 echo "--- END OF LDEV OUTPUT ---"
6810 # ldev failed, error
6811 if [ $? -ne 0 ]; then
6812 rm $LDEVCONFPATH $NIDSPATH
6813 error "ldev failed to execute!"
6816 # need to process multiple lines because of combined MGS and MDS
6817 echo -e $output | awk '{ print $2 }' | while read -r line ; do
6818 if [ "$line" != "$MGSNID" ]; then
6819 rm $LDEVCONFPATH $NIDSPATH
6820 error "ldev failed mgs nid '$line', expected '$MGSNID'"
6824 rm $LDEVCONFPATH $NIDSPATH
6826 run_test 92 "ldev returns MGS NID correctly in command substitution"
6829 [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs" && return
6832 #start mgs or mgs/mdt0
6833 if ! combined_mgs_mds ; then
6840 start_ost || error "OST0 start fail"
6842 #define OBD_FAIL_MGS_WRITE_TARGET_DELAY 0x90e
6843 do_facet mgs "$LCTL set_param fail_val = 10 fail_loc=0x8000090e"
6844 for num in $(seq 2 $MDSCOUNT); do
6848 mount_client $MOUNT || error "mount client fails"
6849 wait_osc_import_state mds ost FULL
6850 wait_osc_import_state client ost FULL
6851 check_mount || error "check_mount failed"
6853 cleanup || error "cleanup failed with $?"
6855 run_test 93 "register mulitple MDT at the same time"
6858 if [ -z "$LDEV" ]; then
6859 error "ldev is missing!"
6862 local LDEVCONFPATH=$TMP/ldev.conf
6863 local NIDSPATH=$TMP/nids
6865 generate_ldev_conf $LDEVCONFPATH
6866 generate_nids $NIDSPATH
6868 local LDEV_OUTPUT=$TMP/ldev-output.txt
6869 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -F $FSNAME > $LDEV_OUTPUT
6871 # ldev failed, error
6872 if [ $? -ne 0 ]; then
6873 rm $LDEVCONFPATH $NIDSPATH $LDEV_OUTPUT
6874 error "ldev failed to execute!"
6878 local EXPECTED_OUTPUT=$TMP/ldev-expected.txt
6880 printf "%s-MGS0000\n" $FSNAME > $EXPECTED_OUTPUT
6882 for num in $(seq $MDSCOUNT); do
6883 printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
6886 for num in $(seq $OSTCOUNT); do
6887 printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
6890 compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
6892 if [ $? -ne 0 ]; then
6893 rm $LDEVCONFPATH $NIDSPATH $EXPECTED_OUTPUT $LDEV_OUTPUT
6894 error "ldev failed to produce the correct hostlist!"
6897 rm $LDEVCONFPATH $NIDSPATH $EXPECTED_OUTPUT $LDEV_OUTPUT
6899 run_test 94 "ldev outputs correct labels for file system name query"
6902 if [ -z "$LDEV" ]; then
6903 error "ldev is missing!"
6906 local LDEVCONFPATH=$TMP/ldev.conf
6907 local NIDSPATH=$TMP/nids
6909 generate_ldev_conf $LDEVCONFPATH
6910 generate_nids $NIDSPATH
6914 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -F $FSNAME &>/dev/null
6915 if [ $? -ne 0 ]; then
6916 rm $LDEVCONFPATH $NIDSPATH
6917 error "ldev label filtering w/ -F failed!"
6921 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -l &>/dev/null
6922 if [ $? -ne 0 ]; then
6923 rm $LDEVCONFPATH $NIDSPATH
6924 error "ldev label filtering w/ -l failed!"
6928 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -f &>/dev/null
6929 if [ $? -ne 0 ]; then
6930 rm $LDEVCONFPATH $NIDSPATH
6931 error "ldev label filtering w/ -f failed!"
6935 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -a &>/dev/null
6936 if [ $? -ne 0 ]; then
6937 rm $LDEVCONFPATH $NIDSPATH
6938 error "ldev label filtering w/ -a failed!"
6943 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -a -F $FSNAME &>/dev/null
6944 if [ $? -eq 0 ]; then
6945 rm $LDEVCONFPATH $NIDSPATH
6946 error "ldev label filtering w/ -a and -F incorrectly succeeded"
6950 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -a -f &>/dev/null
6951 if [ $? -eq 0 ]; then
6952 rm $LDEVCONFPATH $NIDSPATH
6953 error "ldev label filtering w/ -a and -f incorrectly succeeded"
6957 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -a -l &>/dev/null
6958 if [ $? -eq 0 ]; then
6959 rm $LDEVCONFPATH $NIDSPATH
6960 error "ldev label filtering w/ -a and -l incorrectly succeeded"
6964 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -f -l &>/dev/null
6965 if [ $? -eq 0 ]; then
6966 rm $LDEVCONFPATH $NIDSPATH
6967 error "ldev label filtering w/ -f and -l incorrectly succeeded"
6971 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -F $FSNAME -l &>/dev/null
6972 if [ $? -eq 0 ]; then
6973 rm $LDEVCONFPATH $NIDSPATH
6974 error "ldev label filtering w/ -F and -l incorrectly succeeded"
6977 # file sys & foreign
6978 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -F $FSNAME -f &>/dev/null
6979 if [ $? -eq 0 ]; then
6980 rm $LDEVCONFPATH $NIDSPATH
6981 error "ldev label filtering w/ -F and -f incorrectly succeeded"
6984 rm $LDEVCONFPATH $NIDSPATH
6986 run_test 95 "ldev should only allow one label filter"
6989 if [ -z "$LDEV" ]; then
6990 error "ldev is missing!"
6993 local LDEVCONFPATH=$TMP/ldev.conf
6994 local NIDSPATH=$TMP/nids
6996 generate_ldev_conf $LDEVCONFPATH
6997 generate_nids $NIDSPATH
6999 local LDEV_OUTPUT=$TMP/ldev-output.txt
7000 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -H $mgs_HOST \
7002 awk '{print $2}' > $LDEV_OUTPUT
7004 # ldev failed, error
7005 if [ $? -ne 0 ]; then
7006 rm $LDEVCONFPATH $NIDSPATH $LDEV_OUTPUT
7007 error "ldev failed to execute!"
7011 local EXPECTED_OUTPUT=$TMP/ldev-expected-output.txt
7013 echo "$mgs_HOST-$(facet_fstype mgs)" > $EXPECTED_OUTPUT
7015 if [ "$mgs_HOST" == "$mds_HOST" ]; then
7016 for num in $(seq $MDSCOUNT); do
7017 echo "$mds_HOST-$(facet_fstype mds$num)" \
7022 if [ "$mgs_HOST" == "$ost_HOST" ]; then
7023 for num in $(seq $OSTCOUNT); do
7024 echo "$ost_HOST-$(facet_fstype ost$num)" \
7029 compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
7031 if [ $? -ne 0 ]; then
7032 rm $LDEVCONFPATH $NIDSPATH $EXPECTED_OUTPUT $LDEV_OUTPUT
7033 error "ldev failed to produce the correct output!"
7036 rm $LDEVCONFPATH $NIDSPATH $EXPECTED_OUTPUT $LDEV_OUTPUT
7038 run_test 96 "ldev returns hostname and backend fs correctly in command sub"
7041 if [ -z "$LDEV" ]; then
7042 error "ldev is missing!"
7045 local LDEVCONFPATH=$TMP/ldev.conf
7046 local NIDSPATH=$TMP/nids
7048 generate_ldev_conf $LDEVCONFPATH
7049 generate_nids $NIDSPATH
7051 local LDEV_OUTPUT=$TMP/ldev-output.txt
7052 local EXPECTED_OUTPUT=$TMP/ldev-expected-output.txt
7054 echo -e "\nMDT role"
7055 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -F $FSNAME -R mdt > $LDEV_OUTPUT
7057 if [ $? -ne 0 ]; then
7058 rm $LDEVCONFPATH $NIDSPATH $LDEV_OUTPUT
7059 error "ldev failed to execute for mdt role!"
7062 for num in $(seq $MDSCOUNT); do
7063 printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
7066 compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
7068 if [ $? -ne 0 ]; then
7069 rm $LDEVCONFPATH $NIDSPATH $EXPECTED_OUTPUT $LDEV_OUTPUT
7070 error "ldev failed to produce the correct output for mdt role!"
7073 echo -e "\nOST role"
7074 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -F $FSNAME -R ost > $LDEV_OUTPUT
7076 if [ $? -ne 0 ]; then
7077 rm $LDEVCONFPATH $NIDSPATH $LDEV_OUTPUT $EXPECTED_OUTPUT
7078 error "ldev failed to execute for ost role!"
7082 for num in $(seq $OSTCOUNT); do
7083 printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
7086 compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
7088 if [ $? -ne 0 ]; then
7089 rm $LDEVCONFPATH $NIDSPATH $EXPECTED_OUTPUT $LDEV_OUTPUT
7090 error "ldev failed to produce the correct output for ost role!"
7093 echo -e "\nMGS role"
7094 $LDEV -c $LDEVCONFPATH -n $NIDSPATH -F $FSNAME -R mgs > $LDEV_OUTPUT
7096 if [ $? -ne 0 ]; then
7097 rm $LDEVCONFPATH $NIDSPATH $LDEV_OUTPUT $EXPECTED_OUTPUT
7098 error "ldev failed to execute for mgs role!"
7101 printf "%s-MGS0000\n" $FSNAME > $EXPECTED_OUTPUT
7103 compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
7105 if [ $? -ne 0 ]; then
7106 rm $LDEVCONFPATH $NIDSPATH $EXPECTED_OUTPUT $LDEV_OUTPUT
7107 error "ldev failed to produce the correct output for mgs role!"
7110 rm $LDEVCONFPATH $NIDSPATH $EXPECTED_OUTPUT $LDEV_OUTPUT
7112 run_test 97 "ldev returns correct ouput when querying based on role"
7117 local temp=$MDS_MOUNT_OPTS
7120 check_mount || error "mount failed"
7121 mountopt="user_xattr"
7122 for ((x = 1; x <= 400; x++)); do
7123 mountopt="$mountopt,user_xattr"
7125 remount_client $mountopt $MOUNT 2>&1 | grep "too long" ||
7126 error "Buffer overflow check failed"
7127 cleanup || error "cleanup failed"
7129 run_test 98 "Buffer-overflow check while parsing mount_opts"
7133 [[ $(facet_fstype ost1) != ldiskfs ]] &&
7134 { skip "ldiskfs only test" && return; }
7135 [[ $(lustre_version_code ost1) -ge $(version_code 2.8.57) ]] ||
7136 { skip "Need OST version at least 2.8.57" && return 0; }
7138 local ost_opts="$(mkfs_opts ost1 $(ostdevname 1)) \
7139 --reformat $(ostdevname 1) $(ostvdevname 1)"
7140 do_facet ost1 $DEBUGFS -c -R stats `ostdevname 1` | grep "meta_bg" &&
7141 skip "meta_bg already set" && return
7144 if [[ ${!opts} != *mkfsoptions* ]]; then
7145 eval opts=\"${!opts} \
7146 --mkfsoptions='\\\"-O ^resize_inode,meta_bg\\\"'\"
7148 local val=${!opts//--mkfsoptions=\\\"/ \
7149 --mkfsoptions=\\\"-O ^resize_inode,meta_bg }
7153 echo "params: $opts"
7155 add ost1 $opts || error "add ost1 failed with new params"
7157 do_facet ost1 $DEBUGFS -c -R stats `ostdevname 1` | grep "meta_bg" ||
7158 error "meta_bg is not set"
7162 run_test 99 "Adding meta_bg option"
7166 start_mds || error "MDS start failed"
7167 start_ost || error "unable to start OST"
7168 mount_client $MOUNT || error "client start failed"
7169 check_mount || error "check_mount failed"
7178 do_facet mgs 'lshowmount -v' | awk 'BEGIN {NR == 0; rc=1} /MGS:/ {rc=0}
7179 END {exit rc}' || error "lshowmount have no output MGS"
7181 do_facet mds1 'lshowmount -v' | awk 'BEGIN {NR == 2; rc=1} /-MDT0000:/
7182 {rc=0} END {exit rc}' || error "lshowmount have no output MDT0"
7184 do_facet ost1 'lshowmount -v' | awk 'BEGIN {NR == 4; rc=1} /-OST0000:/
7185 {rc=0} END {exit rc}' || error "lshowmount have no output OST0"
7187 cleanup || error "cleanup failed with $?"
7189 run_test 100 "check lshowmount lists MGS, MDT, OST and 0@lo"
7192 local createmany_oid
7193 local dev=$FSNAME-OST0000-osc-MDT0000
7196 createmany -o $DIR1/$tfile-%d 50000 &
7198 # MDT->OST reconnection causes MDT<->OST last_id synchornisation
7199 # via osp_precreate_cleanup_orphans.
7200 for ((i = 0; i < 100; i++)); do
7201 for ((k = 0; k < 10; k++)); do
7202 do_facet $SINGLEMDS "$LCTL --device $dev deactivate;" \
7203 "$LCTL --device $dev activate"
7206 ls -asl $MOUNT | grep '???' &&
7207 (kill -9 $createmany_oid &>/dev/null; \
7208 error "File hasn't object on OST")
7210 kill -s 0 $createmany_oid || break
7212 wait $createmany_oid
7215 run_test 101 "Race MDT->OST reconnection with create"
7218 cleanup || error "cleanup failed with $?"
7220 local mds1dev=$(mdsdevname 1)
7221 local mds1mnt=$(facet_mntpt mds1)
7222 local mds1fstype=$(facet_fstype mds1)
7223 local mds1opts=$MDS_MOUNT_OPTS
7225 if [ $mds1fstype == ldiskfs ] &&
7226 ! do_facet mds1 test -b $mds1dev; then
7227 mds1opts=$(csa_add "$mds1opts" -o loop)
7229 if [[ $mds1fstype == zfs ]]; then
7230 import_zpool mds1 || return ${PIPESTATUS[0]}
7233 # unload all and only load libcfs to allow fail_loc setting
7234 do_facet mds1 lustre_rmmod || error "unable to unload modules"
7235 do_facet mds1 modprobe libcfs || error "libcfs not loaded"
7236 do_facet mds1 lsmod \| grep libcfs || error "libcfs not loaded"
7238 #define OBD_FAIL_OBDCLASS_MODULE_LOAD 0x60a
7239 do_facet mds1 "$LCTL set_param fail_loc=0x8000060a"
7241 do_facet mds1 $MOUNT_CMD $mds1dev $mds1mnt $mds1opts &&
7242 error "mdt start must fail"
7243 do_facet mds1 lsmod \| grep obdclass && error "obdclass must not load"
7245 do_facet mds1 "$LCTL set_param fail_loc=0x0"
7247 do_facet mds1 $MOUNT_CMD $mds1dev $mds1mnt $mds1opts ||
7248 error "mdt start must not fail"
7250 cleanup || error "cleanup failed with $?"
7252 run_test 102 "obdclass module cleanup upon error"
7257 echo "rename $FSNAME to $newname"
7259 if [ ! combined_mgs_mds ]; then
7260 local facet=$(mgsdevname)
7263 "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
7264 error "(7) Fail to rename MGS"
7265 if [ "$(facet_fstype $facet)" = "zfs" ]; then
7266 reimport_zpool mgs $newname-mgs
7270 for num in $(seq $MDSCOUNT); do
7271 local facet=$(mdsdevname $num)
7273 do_facet mds${num} \
7274 "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
7275 error "(8) Fail to rename MDT $num"
7276 if [ "$(facet_fstype $facet)" = "zfs" ]; then
7277 reimport_zpool mds${num} $newname-mdt${num}
7281 for num in $(seq $OSTCOUNT); do
7282 local facet=$(ostdevname $num)
7284 do_facet ost${num} \
7285 "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
7286 error "(9) Fail to rename OST $num"
7287 if [ "$(facet_fstype $facet)" = "zfs" ]; then
7288 reimport_zpool ost${num} $newname-ost${num}
7293 test_103_set_pool() {
7297 do_facet mgs $LCTL pool_add $FSNAME.$pname ${FSNAME}-$ost_x ||
7298 error "Fail to add $ost_x to $FSNAME.$pname"
7299 wait_update $HOSTNAME \
7300 "lctl get_param -n lov.$FSNAME-clilov-*.pools.$pname |
7301 grep $ost_x" "$FSNAME-${ost_x}_UUID" ||
7302 error "$ost_x is NOT in pool $FSNAME.$pname"
7305 test_103_check_pool() {
7306 local save_fsname=$1
7309 stat $DIR/$tdir/test-framework.sh ||
7310 error "($errno) Fail to stat"
7311 do_facet mgs $LCTL pool_list $FSNAME.pool1 ||
7312 error "($errno) Fail to list $FSNAME.pool1"
7313 do_facet mgs $LCTL pool_list $FSNAME.$save_fsname ||
7314 error "($errno) Fail to list $FSNAME.$save_fsname"
7315 do_facet mgs $LCTL pool_list $FSNAME.$save_fsname |
7316 grep ${FSNAME}-OST0000 ||
7317 error "($errno) List $FSNAME.$save_fsname is invalid"
7319 local pname=$($LFS getstripe --pool $DIR/$tdir/d0)
7320 [ "$pname" = "$save_fsname" ] ||
7321 error "($errno) Unexpected pool name $pname"
7325 check_mount_and_prep
7327 mkdir $DIR/$tdir || error "(1) Fail to mkdir $DIR/$tdir"
7328 cp $LUSTRE/tests/test-framework.sh $DIR/$tdir ||
7329 error "(2) Fail to copy test-framework.sh"
7331 do_facet mgs $LCTL pool_new $FSNAME.pool1 ||
7332 error "(3) Fail to create $FSNAME.pool1"
7333 # name the pool name as the fsname
7334 do_facet mgs $LCTL pool_new $FSNAME.$FSNAME ||
7335 error "(4) Fail to create $FSNAME.$FSNAME"
7337 test_103_set_pool $FSNAME OST0000
7339 $SETSTRIPE -p $FSNAME $DIR/$tdir/d0 ||
7340 error "(6) Fail to setstripe on $DIR/$tdir/d0"
7345 test_renamefs mylustre
7347 local save_fsname=$FSNAME
7351 test_103_check_pool $save_fsname 7
7353 if [ $OSTCOUNT -ge 2 ]; then
7354 test_103_set_pool $save_fsname OST0001
7357 $SETSTRIPE -p $save_fsname $DIR/$tdir/f0 ||
7358 error "(16) Fail to setstripe on $DIR/$tdir/f0"
7367 test_103_check_pool $save_fsname 17
7371 test_renamefs $save_fsname
7377 run_test 103 "rename filesystem name"
7379 test_104() { # LU-6952
7380 local mds_mountopts=$MDS_MOUNT_OPTS
7381 local ost_mountopts=$OST_MOUNT_OPTS
7382 local mds_mountfsopts=$MDS_MOUNT_FS_OPTS
7383 local lctl_ver=$(do_facet $SINGLEMDS $LCTL --version |
7386 [[ $(version_code $lctl_ver) -lt $(version_code 2.9.55) ]] &&
7387 { skip "this test needs utils above 2.9.55" && return 0; }
7389 # specify "acl" in mount options used by mkfs.lustre
7390 if [ -z "$MDS_MOUNT_FS_OPTS" ]; then
7391 MDS_MOUNT_FS_OPTS="acl,user_xattr"
7394 MDS_MOUNT_FS_OPTS="${MDS_MOUNT_FS_OPTS},acl,user_xattr"
7397 echo "mountfsopt: $MDS_MOUNT_FS_OPTS"
7399 #reformat/remount the MDT to apply the MDT_MOUNT_FS_OPT options
7401 if [ -z "$MDS_MOUNT_OPTS" ]; then
7402 MDS_MOUNT_OPTS="-o noacl"
7404 MDS_MOUNT_OPTS="${MDS_MOUNT_OPTS},noacl"
7407 for num in $(seq $MDSCOUNT); do
7408 start mds$num $(mdsdevname $num) $MDS_MOUNT_OPTS ||
7409 error "Failed to start MDS"
7412 for num in $(seq $OSTCOUNT); do
7413 start ost$num $(ostdevname $num) $OST_MOUNT_OPTS ||
7414 error "Failed to start OST"
7418 setfacl -m "d:$RUNAS_ID:rwx" $MOUNT &&
7419 error "ACL is applied when FS is mounted with noacl."
7421 MDS_MOUNT_OPTS=$mds_mountopts
7422 OST_MOUNT_OPTS=$ost_mountopts
7423 MDS_MOUNT_FS_OPTS=$mds_mountfsopts
7428 run_test 104 "Make sure user defined options are reflected in mount"
7430 error_and_umount() {
7441 mount --bind $DIR $TMP/$tdir || error "mount bind mnt pt failed"
7442 rm -f $TMP/$tdir/$tfile
7443 rm -f $TMP/$tdir/${tfile}1
7445 # Files should not be created in ro bind mount point
7446 # remounting from rw to ro
7447 mount -o remount,ro $TMP/$tdir ||
7448 error_and_umount "readonly remount of bind mnt pt failed"
7449 touch $TMP/$tdir/$tfile &&
7450 error_and_umount "touch succeeds on ro bind mnt pt"
7451 [ -e $TMP/$tdir/$tfile ] &&
7452 error_and_umount "file created on ro bind mnt pt"
7454 # Files should be created in rw bind mount point
7455 # remounting from ro to rw
7456 mount -o remount,rw $TMP/$tdir ||
7457 error_and_umount "read-write remount of bind mnt pt failed"
7458 touch $TMP/$tdir/${tfile}1 ||
7459 error_and_umount "touch fails on rw bind mnt pt"
7460 [ -e $TMP/$tdir/${tfile}1 ] ||
7461 error_and_umount "file not created on rw bind mnt pt"
7462 umount $TMP/$tdir || error "umount of bind mnt pt failed"
7464 cleanup || error "cleanup failed with $?"
7466 run_test 105 "check file creation for ro and rw bind mnt pt"
7469 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.50) ]] ||
7470 { skip "Need MDS version > 2.10.50"; return; }
7472 start_mgsmds || error "start_mgsmds failed"
7473 start_ost || error "unable to start OST"
7475 # add unknown configuration parameter.
7476 local PARAM="$FSNAME-OST0000.ost.unknown_param=50"
7477 do_facet mgs "$LCTL conf_param $PARAM"
7478 cleanup_nocli || error "cleanup_nocli failed with $?"
7481 # unknown param should be ignored while mounting.
7482 start_ost || error "unable to start OST after unknown param set"
7484 cleanup || error "cleanup failed with $?"
7486 run_test 107 "Unknown config param should not fail target mounting"
7488 if ! combined_mgs_mds ; then
7494 # restore the values of MDSSIZE and OSTSIZE
7495 MDSSIZE=$STORED_MDSSIZE
7496 OSTSIZE=$STORED_OSTSIZE