1 /* -*- mode: c; c-basic-offset: 8; indent-tabs-mode: nil; -*-
2 * vim:expandtab:shiftwidth=8:tabstop=8:
6 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 only,
10 * as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License version 2 for more details (a copy is included
16 * in the LICENSE file that accompanied this code).
18 * You should have received a copy of the GNU General Public License
19 * version 2 along with this program; If not, see
20 * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf
22 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
23 * CA 95054 USA or visit www.sun.com if you need additional information or
29 * Copyright 2008 Sun Microsystems, Inc. All rights reserved
30 * Use is subject to license terms.
33 * This file is part of Lustre, http://www.lustre.org/
34 * Lustre is a trademark of Sun Microsystems, Inc.
36 * lustre/include/lustre/lustre_idl.h
38 * Lustre wire protocol definitions.
41 /** \defgroup lustreidl lustreidl
43 * Lustre wire protocol definitions.
45 * ALL structs passing over the wire should be declared here. Structs
46 * that are used in interfaces with userspace should go in lustre_user.h.
48 * All structs being declared here should be built from simple fixed-size
49 * types (__u8, __u16, __u32, __u64) or be built from other types or
50 * structs also declared in this file. Similarly, all flags and magic
51 * values in those structs should also be declared here. This ensures
52 * that the Lustre wire protocol is not influenced by external dependencies.
54 * The only other acceptable items in this file are VERY SIMPLE accessor
55 * functions to avoid callers grubbing inside the structures, and the
56 * prototypes of the swabber functions for each struct. Nothing that
57 * depends on external functions or definitions should be in here.
59 * Structs must be properly aligned to put 64-bit values on an 8-byte
60 * boundary. Any structs being added here must also be added to
61 * utils/wirecheck.c and "make newwiretest" run to regenerate the
62 * utils/wiretest.c sources. This allows us to verify that wire structs
63 * have the proper alignment/size on all architectures.
65 * DO NOT CHANGE any of the structs, flags, values declared here and used
66 * in released Lustre versions. Some structs may have padding fields that
67 * can be used. Some structs might allow addition at the end (verify this
68 * in the code to ensure that new/old clients that see this larger struct
69 * do not fail, otherwise you need to implement protocol compatibility).
71 * We assume all nodes are either little-endian or big-endian, and we
72 * always send messages in the sender's native format. The receiver
73 * detects the message format by checking the 'magic' field of the message
74 * (see lustre_msg_swabbed() below).
76 * Each wire type has corresponding 'lustre_swab_xxxtypexxx()' routines,
77 * implemented either here, inline (trivial implementations) or in
78 * ptlrpc/pack_generic.c. These 'swabbers' convert the type from "other"
79 * endian, in-place in the message buffer.
81 * A swabber takes a single pointer argument. The caller must already have
82 * verified that the length of the message buffer >= sizeof (type).
84 * For variable length types, a second 'lustre_swab_v_xxxtypexxx()' routine
85 * may be defined that swabs just the variable part, after the caller has
86 * verified that the message buffer is large enough.
91 #ifndef _LUSTRE_IDL_H_
92 #define _LUSTRE_IDL_H_
94 #include <libcfs/libcfs.h>
96 /* Defn's shared with user-space. */
97 #include <lustre/lustre_user.h>
98 #include <lustre/ll_fiemap.h>
103 /* FOO_REQUEST_PORTAL is for incoming requests on the FOO
104 * FOO_REPLY_PORTAL is for incoming replies on the FOO
105 * FOO_BULK_PORTAL is for incoming bulk on the FOO
108 #define CONNMGR_REQUEST_PORTAL 1
109 #define CONNMGR_REPLY_PORTAL 2
110 //#define OSC_REQUEST_PORTAL 3
111 #define OSC_REPLY_PORTAL 4
112 //#define OSC_BULK_PORTAL 5
113 #define OST_IO_PORTAL 6
114 #define OST_CREATE_PORTAL 7
115 #define OST_BULK_PORTAL 8
116 //#define MDC_REQUEST_PORTAL 9
117 #define MDC_REPLY_PORTAL 10
118 //#define MDC_BULK_PORTAL 11
119 #define MDS_REQUEST_PORTAL 12
120 //#define MDS_REPLY_PORTAL 13
121 #define MDS_BULK_PORTAL 14
122 #define LDLM_CB_REQUEST_PORTAL 15
123 #define LDLM_CB_REPLY_PORTAL 16
124 #define LDLM_CANCEL_REQUEST_PORTAL 17
125 #define LDLM_CANCEL_REPLY_PORTAL 18
126 //#define PTLBD_REQUEST_PORTAL 19
127 //#define PTLBD_REPLY_PORTAL 20
128 //#define PTLBD_BULK_PORTAL 21
129 #define MDS_SETATTR_PORTAL 22
130 #define MDS_READPAGE_PORTAL 23
131 #define MDS_MDS_PORTAL 24
133 #define MGC_REPLY_PORTAL 25
134 #define MGS_REQUEST_PORTAL 26
135 #define MGS_REPLY_PORTAL 27
136 #define OST_REQUEST_PORTAL 28
137 #define FLD_REQUEST_PORTAL 29
138 #define SEQ_METADATA_PORTAL 30
139 #define SEQ_DATA_PORTAL 31
140 #define SEQ_CONTROLLER_PORTAL 32
142 /* Portal 63 is reserved for the Cray Inc DVS - nic@cray.com, roe@cray.com, n8851@cray.com */
147 #define SVC_RUNNING 8
148 #define SVC_STOPPING 16
149 #define SVC_STOPPED 32
152 #define PTL_RPC_MSG_REQUEST 4711
153 #define PTL_RPC_MSG_ERR 4712
154 #define PTL_RPC_MSG_REPLY 4713
156 /* DON'T use swabbed values of MAGIC as magic! */
157 #define LUSTRE_MSG_MAGIC_V1 0x0BD00BD0
158 #define LUSTRE_MSG_MAGIC_V2 0x0BD00BD3
160 #define LUSTRE_MSG_MAGIC_V1_SWABBED 0xD00BD00B
161 #define LUSTRE_MSG_MAGIC_V2_SWABBED 0xD30BD00B
163 #define LUSTRE_MSG_MAGIC LUSTRE_MSG_MAGIC_V2
165 #define PTLRPC_MSG_VERSION 0x00000003
166 #define LUSTRE_VERSION_MASK 0xffff0000
167 #define LUSTRE_OBD_VERSION 0x00010000
168 #define LUSTRE_MDS_VERSION 0x00020000
169 #define LUSTRE_OST_VERSION 0x00030000
170 #define LUSTRE_DLM_VERSION 0x00040000
171 #define LUSTRE_LOG_VERSION 0x00050000
172 #define LUSTRE_MGS_VERSION 0x00060000
174 typedef __u32 mdsno_t;
175 typedef __u64 seqno_t;
176 typedef __u64 obd_id;
177 typedef __u64 obd_seq;
178 typedef __u64 obd_time;
179 typedef __u64 obd_size;
180 typedef __u64 obd_off;
181 typedef __u64 obd_blocks;
182 typedef __u64 obd_valid;
183 typedef __u32 obd_blksize;
184 typedef __u32 obd_mode;
185 typedef __u32 obd_uid;
186 typedef __u32 obd_gid;
187 typedef __u32 obd_flag;
188 typedef __u32 obd_count;
191 * Describes a range of sequence, lsr_start is included but lsr_end is
193 * Same structure is used in fld module where lsr_mdt field holds mdt id
197 struct lu_seq_range {
205 * returns width of given range \a r
208 static inline __u64 range_space(const struct lu_seq_range *range)
210 return range->lsr_end - range->lsr_start;
214 * initialize range to zero
217 static inline void range_init(struct lu_seq_range *range)
219 range->lsr_start = range->lsr_end = range->lsr_mdt = 0;
223 * check if given seq id \a s is within given range \a r
226 static inline int range_within(const struct lu_seq_range *range,
229 return s >= range->lsr_start && s < range->lsr_end;
233 * allocate \a w units of sequence from range \a from.
235 static inline void range_alloc(struct lu_seq_range *to,
236 struct lu_seq_range *from,
239 to->lsr_start = from->lsr_start;
240 to->lsr_end = from->lsr_start + width;
241 from->lsr_start += width;
244 static inline int range_is_sane(const struct lu_seq_range *range)
246 return (range->lsr_end >= range->lsr_start);
249 static inline int range_is_zero(const struct lu_seq_range *range)
251 return (range->lsr_start == 0 && range->lsr_end == 0);
254 static inline int range_is_exhausted(const struct lu_seq_range *range)
257 return range_space(range) == 0;
260 #define DRANGE "[%#16.16"LPF64"x-%#16.16"LPF64"x):%x"
262 #define PRANGE(range) \
263 (range)->lsr_start, \
267 /** \defgroup lu_fid lu_fid
271 * Flags for lustre_mdt_attrs::lma_compat and lustre_mdt_attrs::lma_incompat.
274 LMAC_HSM = 0x00000001,
275 LMAC_SOM = 0x00000002,
279 * Masks for all features that should be supported by a Lustre version to
280 * access a specific file.
281 * This information is stored in lustre_mdt_attrs::lma_incompat.
283 * NOTE: No incompat feature should be added before bug #17670 is landed.
285 #define LMA_INCOMPAT_SUPP 0x0
288 * Following struct for MDT attributes, that will be kept inode's EA.
289 * Introduced in 2.0 release (please see b15993, for details)
291 struct lustre_mdt_attrs {
293 * Bitfield for supported data in this structure. From enum lma_compat.
294 * lma_self_fid and lma_flags are always available.
298 * Per-file incompat feature list. Lustre version should support all
299 * flags set in this field. The supported feature mask is available in
303 /** FID of this inode */
304 struct lu_fid lma_self_fid;
305 /** mdt/ost type, others */
307 /* IO Epoch SOM attributes belongs to */
309 /** total file size in objects */
311 /** total fs blocks in objects */
312 __u64 lma_som_blocks;
313 /** mds mount id the size is valid for */
314 __u64 lma_som_mountid;
318 * Fill \a lma with its first content.
319 * Only fid is stored.
321 static inline void lustre_lma_init(struct lustre_mdt_attrs *lma,
322 const struct lu_fid *fid)
325 lma->lma_incompat = 0;
326 memcpy(&lma->lma_self_fid, fid, sizeof(*fid));
328 lma->lma_ioepoch = 0;
329 lma->lma_som_size = 0;
330 lma->lma_som_blocks = 0;
331 lma->lma_som_mountid = 0;
333 /* If a field is added in struct lustre_mdt_attrs, zero it explicitly
334 * and change the test below. */
335 LASSERT(sizeof(*lma) ==
336 (offsetof(struct lustre_mdt_attrs, lma_som_mountid) +
337 sizeof(lma->lma_som_mountid)));
340 extern void lustre_swab_lu_fid(struct lu_fid *fid);
343 * Swab, if needed, lustre_mdt_attr struct to on-disk format.
344 * Otherwise, do not touch it.
346 static inline void lustre_lma_swab(struct lustre_mdt_attrs *lma)
348 /* Use LUSTRE_MSG_MAGIC to detect local endianess. */
349 if (LUSTRE_MSG_MAGIC != cpu_to_le32(LUSTRE_MSG_MAGIC)) {
350 __swab32s(&lma->lma_compat);
351 __swab32s(&lma->lma_incompat);
352 lustre_swab_lu_fid(&lma->lma_self_fid);
353 __swab64s(&lma->lma_flags);
354 __swab64s(&lma->lma_ioepoch);
355 __swab64s(&lma->lma_som_size);
356 __swab64s(&lma->lma_som_blocks);
357 __swab64s(&lma->lma_som_mountid);
361 /* This is the maximum number of MDTs allowed in CMD testing until such
362 * a time that FID-on-OST is implemented. This is due to the limitations
363 * of packing non-0-MDT numbers into the FID SEQ namespace. Once FID-on-OST
364 * is implemented this limit will be virtually unlimited. */
365 #define MAX_MDT_COUNT 8
372 /** initial fid id value */
373 LUSTRE_FID_INIT_OID = 1UL
376 /** returns fid object sequence */
377 static inline __u64 fid_seq(const struct lu_fid *fid)
382 /** returns fid object id */
383 static inline __u32 fid_oid(const struct lu_fid *fid)
388 /** returns fid object version */
389 static inline __u32 fid_ver(const struct lu_fid *fid)
394 static inline void fid_zero(struct lu_fid *fid)
396 memset(fid, 0, sizeof(*fid));
399 static inline obd_id fid_ver_oid(const struct lu_fid *fid)
401 return ((__u64)fid_ver(fid) << 32 | fid_oid(fid));
405 * Different FID Format
406 * http://arch.lustre.org/index.php?title=Interoperability_fids_zfs#NEW.0
409 FID_SEQ_OST_MDT0 = 0,
412 FID_SEQ_OST_MDT1 = 3,
413 FID_SEQ_OST_MAX = 9, /* Max MDT count before OST_on_FID */
416 FID_SEQ_IGIF_MAX = 0x0ffffffffULL,
417 FID_SEQ_IDIF = 0x100000000ULL,
418 FID_SEQ_IDIF_MAX = 0x1ffffffffULL,
419 /* Normal FID sequence starts from this value, i.e. 1<<33 */
420 FID_SEQ_START = 0x200000000ULL,
421 FID_SEQ_LOCAL_FILE = 0x200000001ULL,
422 FID_SEQ_DOT_LUSTRE = 0x200000002ULL,
423 FID_SEQ_NORMAL = 0x200000400ULL
426 #define OBIF_OID_MAX_BITS 32
427 #define OBIF_MAX_OID (1ULL << OBIF_OID_MAX_BITS)
428 #define OBIF_OID_MASK ((1ULL << OBIF_OID_MAX_BITS) - 1)
429 #define IDIF_OID_MAX_BITS 48
430 #define IDIF_MAX_OID (1ULL << IDIF_OID_MAX_BITS)
431 #define IDIF_OID_MASK ((1ULL << IDIF_OID_MAX_BITS) - 1)
434 static inline int fid_seq_is_mdt0(obd_seq seq)
436 return (seq == FID_SEQ_OST_MDT0);
439 static inline int fid_seq_is_cmd(const __u64 seq)
441 return (seq >= FID_SEQ_OST_MDT1 && seq <= FID_SEQ_OST_MAX);
444 static inline int fid_seq_is_mdt(const __u64 seq)
446 return seq == FID_SEQ_OST_MDT0 ||
447 (seq >= FID_SEQ_OST_MDT1 && seq <= FID_SEQ_OST_MAX);
450 static inline int fid_seq_is_rsvd(const __u64 seq)
452 return seq <= FID_SEQ_RSVD;
455 static inline int fid_is_mdt0(const struct lu_fid *fid)
457 return fid_seq_is_mdt0(fid_seq(fid));
461 * Check if a fid is igif or not.
462 * \param fid the fid to be tested.
463 * \return true if the fid is a igif; otherwise false.
465 static inline int fid_seq_is_igif(const __u64 seq)
467 return seq >= FID_SEQ_IGIF && seq <= FID_SEQ_IGIF_MAX;
470 static inline int fid_is_igif(const struct lu_fid *fid)
472 return fid_seq_is_igif(fid_seq(fid));
476 * Check if a fid is idif or not.
477 * \param fid the fid to be tested.
478 * \return true if the fid is a idif; otherwise false.
480 static inline int fid_seq_is_idif(const __u64 seq)
482 return seq >= FID_SEQ_IDIF && seq <= FID_SEQ_IDIF_MAX;
485 static inline int fid_is_idif(const struct lu_fid *fid)
487 return fid_seq_is_igif(fid_seq(fid));
495 static inline int fid_seq_is_norm(const __u64 seq)
497 return (seq >= FID_SEQ_NORMAL);
500 static inline int fid_is_norm(const struct lu_fid *fid)
502 return fid_seq_is_norm(fid_seq(fid));
505 /* convert an OST objid into an IDIF FID SEQ number */
506 static inline obd_seq fid_idif_seq(obd_id id, __u32 ost_idx)
508 return FID_SEQ_IDIF | (ost_idx << 16) | ((id >> 32) & 0xffff);
511 /* convert a packed IDIF FID into an OST objid */
512 static inline obd_id fid_idif_id(obd_seq seq, __u32 oid, __u32 ver)
514 return ((__u64)ver << 48) | ((seq & 0xffff) << 32) | oid;
517 /* unpack an ostid (id/seq) from a wire/disk structure into an IDIF FID */
518 static inline void ostid_idif_unpack(struct ost_id *ostid,
519 struct lu_fid *fid, __u32 ost_idx)
521 fid->f_seq = fid_idif_seq(ostid->oi_id, ost_idx);
522 fid->f_oid = ostid->oi_id; /* truncate to 32 bits by assignment */
523 fid->f_ver = ostid->oi_id >> 48; /* in theory, not currently used */
526 /* unpack an ostid (id/seq) from a wire/disk structure into a non-IDIF FID */
527 static inline void ostid_fid_unpack(struct ost_id *ostid, struct lu_fid *fid)
529 fid->f_seq = ostid->oi_seq;
530 fid->f_oid = ostid->oi_id; /* truncate to 32 bits by assignment */
531 fid->f_ver = ostid->oi_id >> 32; /* in theory, not currently used */
534 /* Unpack an OST object id/seq (group) into a FID. This is needed for
535 * converting all obdo, lmm, lsm, etc. 64-bit id/seq pairs into proper
536 * FIDs. Note that if an id/seq is already in FID/IDIF format it will
537 * be passed through unchanged. Only legacy OST objects in "group 0"
538 * will be mapped into the IDIF namespace so that they can fit into the
539 * struct lu_fid fields without loss. For reference see:
540 * http://arch.lustre.org/index.php?title=Interoperability_fids_zfs
542 static inline int fid_ostid_unpack(struct lu_fid *fid, struct ost_id *ostid,
545 if (ost_idx > 0xffff) {
546 CERROR("bad ost_idx, seq:"LPU64" id:"LPU64" ost_idx:%u\n",
547 ostid->oi_seq, ostid->oi_id, ost_idx);
551 if (fid_seq_is_mdt0(ostid->oi_seq)) {
552 /* This is a "legacy" (old 1.x/2.early) OST object in "group 0"
553 * that we map into the IDIF namespace. It allows up to 2^48
554 * objects per OST, as this is the object namespace that has
555 * been in production for years. This can handle create rates
556 * of 1M objects/s/OST for 9 years, or combinations thereof. */
557 if (ostid->oi_id >= IDIF_MAX_OID) {
558 CERROR("bad MDT0 id, seq:"LPU64" id:"LPU64" ost_idx:%u\n",
559 ostid->oi_seq, ostid->oi_id, ost_idx);
562 ostid_idif_unpack(ostid, fid, ost_idx);
564 } else if (fid_seq_is_rsvd(ostid->oi_seq)) {
565 /* These are legacy OST objects for LLOG/ECHO and CMD testing.
566 * We only support 2^32 objects in these groups, and cannot
567 * uniquely identify them in the system (i.e. they are the
568 * duplicated on all OSTs), but this is not strictly required
569 * for the old object protocol, which has a separate ost_idx. */
570 if (ostid->oi_id >= 0xffffffffULL) {
571 CERROR("bad RSVD id, seq:"LPU64" id:"LPU64" ost_idx:%u\n",
572 ostid->oi_seq, ostid->oi_id, ost_idx);
575 ostid_fid_unpack(ostid, fid);
577 } else if (unlikely(fid_seq_is_igif(ostid->oi_seq))) {
578 /* This is an MDT inode number, which should never collide with
579 * proper OST object IDs, and is probably a broken filesystem */
580 CERROR("bad IGIF, seq:"LPU64" id:"LPU64" ost_idx:%u\n",
581 ostid->oi_seq, ostid->oi_id, ost_idx);
584 } else /* if (fid_seq_is_idif(seq) || fid_seq_is_norm(seq)) */ {
585 /* This is either an IDIF object, which identifies objects across
586 * all OSTs, or a regular FID. The IDIF namespace maps legacy
587 * OST objects into the FID namespace. In both cases, we just
588 * pass the FID through, no conversion needed. */
589 ostid_fid_unpack(ostid, fid);
595 /* pack an IDIF FID into an ostid (id/seq) for the wire/disk */
596 static inline void ostid_idif_pack(struct lu_fid *fid, struct ost_id *ostid)
598 ostid->oi_seq = FID_SEQ_OST_MDT0;
599 ostid->oi_id = fid_idif_id(fid->f_seq, fid->f_oid, fid->f_ver);
602 /* pack a non-IDIF FID into an ostid (id/seq) for the wire/disk */
603 static inline void ostid_fid_pack(struct lu_fid *fid, struct ost_id *ostid)
605 ostid->oi_seq = fid_seq(fid);
606 ostid->oi_id = fid_ver_oid(fid);
609 /* pack any OST FID into an ostid (id/seq) for the wire/disk */
610 static inline int fid_ostid_pack(struct lu_fid *fid, struct ost_id *ostid)
612 if (unlikely(fid_seq_is_igif(fid->f_seq))) {
613 CERROR("bad IGIF, "DFID"\n", PFID(fid));
617 if (fid_is_idif(fid))
618 ostid_idif_pack(fid, ostid);
620 ostid_fid_pack(fid, ostid);
625 /* extract OST sequence (group) from a wire ost_id (id/seq) pair */
626 static inline obd_seq ostid_seq(struct ost_id *ostid)
628 if (unlikely(fid_seq_is_igif(ostid->oi_seq)))
629 CWARN("bad IGIF, oi_seq: "LPU64" oi_id: "LPX64"\n",
630 ostid->oi_seq, ostid->oi_id);
632 if (unlikely(fid_seq_is_idif(ostid->oi_seq)))
633 return FID_SEQ_OST_MDT0;
635 return ostid->oi_seq;
638 /* extract OST objid from a wire ost_id (id/seq) pair */
639 static inline obd_id ostid_id(struct ost_id *ostid)
641 if (ostid->oi_seq == FID_SEQ_OST_MDT0)
642 return ostid->oi_id & IDIF_OID_MASK;
644 if (fid_seq_is_rsvd(ostid->oi_seq))
645 return ostid->oi_id & OBIF_OID_MASK;
647 if (fid_seq_is_idif(ostid->oi_seq))
648 return fid_idif_id(ostid->oi_seq, ostid->oi_id, 0);
654 * Get inode number from a igif.
655 * \param fid a igif to get inode number from.
656 * \return inode number for the igif.
658 static inline ino_t lu_igif_ino(const struct lu_fid *fid)
664 * Build igif from the inode number/generation.
666 #define LU_IGIF_BUILD(fid, ino, gen) \
672 static inline void lu_igif_build(struct lu_fid *fid, __u32 ino, __u32 gen)
674 LU_IGIF_BUILD(fid, ino, gen);
675 LASSERT(fid_is_igif(fid));
679 * Get inode generation from a igif.
680 * \param fid a igif to get inode generation from.
681 * \return inode generation for the igif.
683 static inline __u32 lu_igif_gen(const struct lu_fid *fid)
689 * Fids are transmitted across network (in the sender byte-ordering),
690 * and stored on disk in big-endian order.
692 static inline void fid_cpu_to_le(struct lu_fid *dst, const struct lu_fid *src)
694 /* check that all fields are converted */
695 CLASSERT(sizeof *src ==
696 sizeof fid_seq(src) +
697 sizeof fid_oid(src) + sizeof fid_ver(src));
698 LASSERTF(fid_is_igif(src) || fid_ver(src) == 0, DFID"\n", PFID(src));
699 dst->f_seq = cpu_to_le64(fid_seq(src));
700 dst->f_oid = cpu_to_le32(fid_oid(src));
701 dst->f_ver = cpu_to_le32(fid_ver(src));
704 static inline void fid_le_to_cpu(struct lu_fid *dst, const struct lu_fid *src)
706 /* check that all fields are converted */
707 CLASSERT(sizeof *src ==
708 sizeof fid_seq(src) +
709 sizeof fid_oid(src) + sizeof fid_ver(src));
710 dst->f_seq = le64_to_cpu(fid_seq(src));
711 dst->f_oid = le32_to_cpu(fid_oid(src));
712 dst->f_ver = le32_to_cpu(fid_ver(src));
713 LASSERTF(fid_is_igif(dst) || fid_ver(dst) == 0, DFID"\n", PFID(dst));
716 static inline void fid_cpu_to_be(struct lu_fid *dst, const struct lu_fid *src)
718 /* check that all fields are converted */
719 CLASSERT(sizeof *src ==
720 sizeof fid_seq(src) +
721 sizeof fid_oid(src) + sizeof fid_ver(src));
722 LASSERTF(fid_is_igif(src) || fid_ver(src) == 0, DFID"\n", PFID(src));
723 dst->f_seq = cpu_to_be64(fid_seq(src));
724 dst->f_oid = cpu_to_be32(fid_oid(src));
725 dst->f_ver = cpu_to_be32(fid_ver(src));
728 static inline void fid_be_to_cpu(struct lu_fid *dst, const struct lu_fid *src)
730 /* check that all fields are converted */
731 CLASSERT(sizeof *src ==
732 sizeof fid_seq(src) +
733 sizeof fid_oid(src) + sizeof fid_ver(src));
734 dst->f_seq = be64_to_cpu(fid_seq(src));
735 dst->f_oid = be32_to_cpu(fid_oid(src));
736 dst->f_ver = be32_to_cpu(fid_ver(src));
737 LASSERTF(fid_is_igif(dst) || fid_ver(dst) == 0, DFID"\n", PFID(dst));
740 static inline int fid_is_sane(const struct lu_fid *fid)
744 ((fid_seq(fid) >= FID_SEQ_START && fid_oid(fid) != 0
745 && fid_ver(fid) == 0) ||
749 static inline int fid_is_zero(const struct lu_fid *fid)
751 return fid_seq(fid) == 0 && fid_oid(fid) == 0;
754 extern void lustre_swab_lu_fid(struct lu_fid *fid);
755 extern void lustre_swab_lu_seq_range(struct lu_seq_range *range);
757 static inline int lu_fid_eq(const struct lu_fid *f0,
758 const struct lu_fid *f1)
760 /* Check that there is no alignment padding. */
761 CLASSERT(sizeof *f0 ==
762 sizeof f0->f_seq + sizeof f0->f_oid + sizeof f0->f_ver);
763 LASSERTF(fid_is_igif(f0) || fid_ver(f0) == 0, DFID, PFID(f0));
764 LASSERTF(fid_is_igif(f1) || fid_ver(f1) == 0, DFID, PFID(f1));
765 return memcmp(f0, f1, sizeof *f0) == 0;
768 #define __diff_normalize(val0, val1) \
770 typeof(val0) __val0 = (val0); \
771 typeof(val1) __val1 = (val1); \
773 (__val0 == __val1 ? 0 : __val0 > __val1 ? +1 : -1); \
776 static inline int lu_fid_cmp(const struct lu_fid *f0,
777 const struct lu_fid *f1)
780 __diff_normalize(fid_seq(f0), fid_seq(f1)) ?:
781 __diff_normalize(fid_oid(f0), fid_oid(f1)) ?:
782 __diff_normalize(fid_ver(f0), fid_ver(f1));
787 /** \defgroup lu_dir lu_dir
791 * Enumeration of possible directory entry attributes.
793 * Attributes follow directory entry header in the order they appear in this
796 enum lu_dirent_attrs {
802 * Layout of readdir pages, as transmitted on wire.
805 /** valid if LUDA_FID is set. */
806 struct lu_fid lde_fid;
807 /** a unique entry identifier: a hash or an offset. */
809 /** total record length, including all attributes. */
813 /** optional variable size attributes following this entry.
814 * taken from enum lu_dirent_attrs.
817 /** name is followed by the attributes indicated in ->ldp_attrs, in
818 * their natural order. After the last attribute, padding bytes are
819 * added to make ->lde_reclen a multiple of 8.
825 * Definitions of optional directory entry attributes formats.
827 * Individual attributes do not have their length encoded in a generic way. It
828 * is assumed that consumer of an attribute knows its format. This means that
829 * it is impossible to skip over an unknown attribute, except by skipping over all
830 * remaining attributes (by using ->lde_reclen), which is not too
831 * constraining, because new server versions will append new attributes at
832 * the end of an entry.
836 * Fid directory attribute: a fid of an object referenced by the entry. This
837 * will be almost always requested by the client and supplied by the server.
839 * Aligned to 8 bytes.
841 /* To have compatibility with 1.8, lets have fid in lu_dirent struct. */
846 * Aligned to 2 bytes.
853 __u64 ldp_hash_start;
857 struct lu_dirent ldp_entries[0];
860 enum lu_dirpage_flags {
864 static inline struct lu_dirent *lu_dirent_start(struct lu_dirpage *dp)
866 if (le32_to_cpu(dp->ldp_flags) & LDF_EMPTY)
869 return dp->ldp_entries;
872 static inline struct lu_dirent *lu_dirent_next(struct lu_dirent *ent)
874 struct lu_dirent *next;
876 if (le16_to_cpu(ent->lde_reclen) != 0)
877 next = ((void *)ent) + le16_to_cpu(ent->lde_reclen);
884 static inline int lu_dirent_calc_size(int namelen, __u16 attr)
888 if (attr & LUDA_TYPE) {
889 const unsigned align = sizeof(struct luda_type) - 1;
890 size = (sizeof(struct lu_dirent) + namelen + align) & ~align;
891 size += sizeof(struct luda_type);
893 size = sizeof(struct lu_dirent) + namelen;
895 return (size + 7) & ~7;
898 static inline int lu_dirent_size(struct lu_dirent *ent)
900 if (le16_to_cpu(ent->lde_reclen) == 0) {
901 return lu_dirent_calc_size(le16_to_cpu(ent->lde_namelen),
902 le32_to_cpu(ent->lde_attrs));
904 return le16_to_cpu(ent->lde_reclen);
907 #define DIR_END_OFF 0xfffffffffffffffeULL
911 struct lustre_handle {
914 #define DEAD_HANDLE_MAGIC 0xdeadbeefcafebabeULL
916 static inline int lustre_handle_is_used(struct lustre_handle *lh)
918 return lh->cookie != 0ull;
921 static inline int lustre_handle_equal(struct lustre_handle *lh1,
922 struct lustre_handle *lh2)
924 return lh1->cookie == lh2->cookie;
927 static inline void lustre_handle_copy(struct lustre_handle *tgt,
928 struct lustre_handle *src)
930 tgt->cookie = src->cookie;
933 /* flags for lm_flags */
934 #define MSGHDR_AT_SUPPORT 0x1
936 #define lustre_msg lustre_msg_v2
937 /* we depend on this structure to be 8-byte aligned */
938 /* this type is only endian-adjusted in lustre_unpack_msg() */
939 struct lustre_msg_v2 {
951 /* without gss, ptlrpc_body is put at the first buffer. */
952 #define PTLRPC_NUM_VERSIONS 4
954 struct lustre_handle pb_handle;
961 __u64 pb_last_committed;
966 __u32 pb_timeout; /* for req, the deadline, for rep, the service est */
967 __u32 pb_service_time; /* for rep, actual service time */
970 /* VBR: pre-versions */
971 __u64 pb_pre_versions[PTLRPC_NUM_VERSIONS];
972 /* padding for future needs */
976 extern void lustre_swab_ptlrpc_body(struct ptlrpc_body *pb);
978 /* message body offset for lustre_msg_v2 */
979 /* ptlrpc body offset in all request/reply messages */
980 #define MSG_PTLRPC_BODY_OFF 0
982 /* normal request/reply message record offset */
983 #define REQ_REC_OFF 1
984 #define REPLY_REC_OFF 1
986 /* ldlm request message body offset */
987 #define DLM_LOCKREQ_OFF 1 /* lockreq offset */
988 #define DLM_REQ_REC_OFF 2 /* normal dlm request record offset */
990 /* ldlm intent lock message body offset */
991 #define DLM_INTENT_IT_OFF 2 /* intent lock it offset */
992 #define DLM_INTENT_REC_OFF 3 /* intent lock record offset */
994 /* ldlm reply message body offset */
995 #define DLM_LOCKREPLY_OFF 1 /* lockrep offset */
996 #define DLM_REPLY_REC_OFF 2 /* reply record offset */
998 /** only use in req->rq_{req,rep}_swab_mask */
999 #define MSG_PTLRPC_HEADER_OFF 31
1001 /* Flags that are operation-specific go in the top 16 bits. */
1002 #define MSG_OP_FLAG_MASK 0xffff0000
1003 #define MSG_OP_FLAG_SHIFT 16
1005 /* Flags that apply to all requests are in the bottom 16 bits */
1006 #define MSG_GEN_FLAG_MASK 0x0000ffff
1007 #define MSG_LAST_REPLAY 0x0001
1008 #define MSG_RESENT 0x0002
1009 #define MSG_REPLAY 0x0004
1010 /* #define MSG_AT_SUPPORT 0x0008
1011 * This was used in early prototypes of adaptive timeouts, and while there
1012 * shouldn't be any users of that code there also isn't a need for using this
1013 * bits. Defer usage until at least 1.10 to avoid potential conflict. */
1014 #define MSG_DELAY_REPLAY 0x0010
1015 #define MSG_VERSION_REPLAY 0x0020
1016 #define MSG_REQ_REPLAY_DONE 0x0040
1017 #define MSG_LOCK_REPLAY_DONE 0x0080
1020 * Flags for all connect opcodes (MDS_CONNECT, OST_CONNECT)
1023 #define MSG_CONNECT_RECOVERING 0x00000001
1024 #define MSG_CONNECT_RECONNECT 0x00000002
1025 #define MSG_CONNECT_REPLAYABLE 0x00000004
1026 //#define MSG_CONNECT_PEER 0x8
1027 #define MSG_CONNECT_LIBCLIENT 0x00000010
1028 #define MSG_CONNECT_INITIAL 0x00000020
1029 #define MSG_CONNECT_ASYNC 0x00000040
1030 #define MSG_CONNECT_NEXT_VER 0x00000080 /* use next version of lustre_msg */
1031 #define MSG_CONNECT_TRANSNO 0x00000100 /* report transno */
1034 #define OBD_CONNECT_RDONLY 0x1ULL /*client has read-only access*/
1035 #define OBD_CONNECT_INDEX 0x2ULL /*connect specific LOV idx */
1036 #define OBD_CONNECT_MDS 0x4ULL /*connect from MDT to OST */
1037 #define OBD_CONNECT_GRANT 0x8ULL /*OSC gets grant at connect */
1038 #define OBD_CONNECT_SRVLOCK 0x10ULL /*server takes locks for cli */
1039 #define OBD_CONNECT_VERSION 0x20ULL /*Lustre versions in ocd */
1040 #define OBD_CONNECT_REQPORTAL 0x40ULL /*Separate non-IO req portal */
1041 #define OBD_CONNECT_ACL 0x80ULL /*access control lists */
1042 #define OBD_CONNECT_XATTR 0x100ULL /*client use extended attr */
1043 #define OBD_CONNECT_CROW 0x200ULL /*MDS+OST create obj on write*/
1044 #define OBD_CONNECT_TRUNCLOCK 0x400ULL /*locks on server for punch */
1045 #define OBD_CONNECT_TRANSNO 0x800ULL /*replay sends init transno */
1046 #define OBD_CONNECT_IBITS 0x1000ULL /*support for inodebits locks*/
1047 #define OBD_CONNECT_JOIN 0x2000ULL /*files can be concatenated.
1048 *We do not support JOIN FILE
1049 *anymore, reserve this flags
1050 *just for preventing such bit
1052 #define OBD_CONNECT_ATTRFID 0x4000ULL /*Server can GetAttr By Fid*/
1053 #define OBD_CONNECT_NODEVOH 0x8000ULL /*No open hndl on specl nodes*/
1054 #define OBD_CONNECT_RMT_CLIENT 0x10000ULL /*Remote client */
1055 #define OBD_CONNECT_RMT_CLIENT_FORCE 0x20000ULL /*Remote client by force */
1056 #define OBD_CONNECT_BRW_SIZE 0x40000ULL /*Max bytes per rpc */
1057 #define OBD_CONNECT_QUOTA64 0x80000ULL /*64bit qunit_data.qd_count */
1058 #define OBD_CONNECT_MDS_CAPA 0x100000ULL /*MDS capability */
1059 #define OBD_CONNECT_OSS_CAPA 0x200000ULL /*OSS capability */
1060 #define OBD_CONNECT_CANCELSET 0x400000ULL /*Early batched cancels. */
1061 #define OBD_CONNECT_SOM 0x800000ULL /*Size on MDS */
1062 #define OBD_CONNECT_AT 0x1000000ULL /*client uses AT */
1063 #define OBD_CONNECT_LRU_RESIZE 0x2000000ULL /*LRU resize feature. */
1064 #define OBD_CONNECT_MDS_MDS 0x4000000ULL /*MDS-MDS connection */
1065 #define OBD_CONNECT_REAL 0x8000000ULL /*real connection */
1066 #define OBD_CONNECT_CHANGE_QS 0x10000000ULL /*shrink/enlarge qunit */
1067 #define OBD_CONNECT_CKSUM 0x20000000ULL /*support several cksum algos*/
1068 #define OBD_CONNECT_FID 0x40000000ULL /*FID is supported by server */
1069 #define OBD_CONNECT_VBR 0x80000000ULL /*version based recovery */
1070 #define OBD_CONNECT_LOV_V3 0x100000000ULL /*client supports LOV v3 EA */
1071 #define OBD_CONNECT_GRANT_SHRINK 0x200000000ULL /* support grant shrink */
1072 #define OBD_CONNECT_SKIP_ORPHAN 0x400000000ULL /* don't reuse orphan objids */
1073 /* also update obd_connect_names[] for lprocfs_rd_connect_flags()
1074 * and lustre/utils/wirecheck.c */
1076 #ifdef HAVE_LRU_RESIZE_SUPPORT
1077 #define LRU_RESIZE_CONNECT_FLAG OBD_CONNECT_LRU_RESIZE
1079 #define LRU_RESIZE_CONNECT_FLAG 0
1082 #define MDT_CONNECT_SUPPORTED (OBD_CONNECT_RDONLY | OBD_CONNECT_VERSION | \
1083 OBD_CONNECT_ACL | OBD_CONNECT_XATTR | \
1084 OBD_CONNECT_IBITS | OBD_CONNECT_JOIN | \
1085 OBD_CONNECT_NODEVOH |/* OBD_CONNECT_ATTRFID |*/\
1086 OBD_CONNECT_CANCELSET | OBD_CONNECT_AT | \
1087 OBD_CONNECT_RMT_CLIENT | \
1088 OBD_CONNECT_RMT_CLIENT_FORCE | \
1089 OBD_CONNECT_MDS_CAPA | OBD_CONNECT_OSS_CAPA | \
1090 OBD_CONNECT_MDS_MDS | OBD_CONNECT_FID | \
1091 LRU_RESIZE_CONNECT_FLAG | OBD_CONNECT_VBR | \
1092 OBD_CONNECT_LOV_V3 | OBD_CONNECT_SOM)
1093 #define OST_CONNECT_SUPPORTED (OBD_CONNECT_SRVLOCK | OBD_CONNECT_GRANT | \
1094 OBD_CONNECT_REQPORTAL | OBD_CONNECT_VERSION | \
1095 OBD_CONNECT_TRUNCLOCK | OBD_CONNECT_INDEX | \
1096 OBD_CONNECT_BRW_SIZE | OBD_CONNECT_QUOTA64 | \
1097 OBD_CONNECT_CANCELSET | OBD_CONNECT_AT | \
1098 LRU_RESIZE_CONNECT_FLAG | OBD_CONNECT_CKSUM | \
1099 OBD_CONNECT_CHANGE_QS | \
1100 OBD_CONNECT_OSS_CAPA | OBD_CONNECT_RMT_CLIENT | \
1101 OBD_CONNECT_RMT_CLIENT_FORCE | OBD_CONNECT_VBR | \
1102 OBD_CONNECT_MDS | OBD_CONNECT_SKIP_ORPHAN | \
1103 OBD_CONNECT_GRANT_SHRINK)
1104 #define ECHO_CONNECT_SUPPORTED (0)
1105 #define MGS_CONNECT_SUPPORTED (OBD_CONNECT_VERSION | OBD_CONNECT_AT)
1107 #define OBD_OCD_VERSION(major,minor,patch,fix) (((major)<<24) + ((minor)<<16) +\
1108 ((patch)<<8) + (fix))
1109 #define OBD_OCD_VERSION_MAJOR(version) ((int)((version)>>24)&255)
1110 #define OBD_OCD_VERSION_MINOR(version) ((int)((version)>>16)&255)
1111 #define OBD_OCD_VERSION_PATCH(version) ((int)((version)>>8)&255)
1112 #define OBD_OCD_VERSION_FIX(version) ((int)(version)&255)
1114 /* This structure is used for both request and reply.
1116 * If we eventually have separate connect data for different types, which we
1117 * almost certainly will, then perhaps we stick a union in here. */
1118 struct obd_connect_data {
1119 __u64 ocd_connect_flags; /* OBD_CONNECT_* per above */
1120 __u32 ocd_version; /* lustre release version number */
1121 __u32 ocd_grant; /* initial cache grant amount (bytes) */
1122 __u32 ocd_index; /* LOV index to connect to */
1123 __u32 ocd_brw_size; /* Maximum BRW size in bytes */
1124 __u64 ocd_ibits_known; /* inode bits this client understands */
1125 __u32 ocd_nllu; /* non-local-lustre-user */
1126 __u32 ocd_nllg; /* non-local-lustre-group */
1127 __u64 ocd_transno; /* first transno from client to be replayed */
1128 __u32 ocd_group; /* MDS group on OST */
1129 __u32 ocd_cksum_types; /* supported checksum algorithms */
1130 __u64 padding1; /* also fix lustre_swab_connect */
1131 __u64 padding2; /* also fix lustre_swab_connect */
1134 extern void lustre_swab_connect(struct obd_connect_data *ocd);
1137 * Supported checksum algorithms. Up to 32 checksum types are supported.
1138 * (32-bit mask stored in obd_connect_data::ocd_cksum_types)
1139 * Please update DECLARE_CKSUM_NAME/OBD_CKSUM_ALL in obd.h when adding a new
1140 * algorithm and also the OBD_FL_CKSUM* flags.
1143 OBD_CKSUM_CRC32 = 0x00000001,
1144 OBD_CKSUM_ADLER = 0x00000002,
1148 * OST requests: OBDO & OBD request records
1153 OST_REPLY = 0, /* reply ? */
1169 OST_QUOTACHECK = 18,
1171 OST_QUOTA_ADJUST_QUNIT = 20,
1174 #define OST_FIRST_OPC OST_REPLY
1177 OBD_FL_INLINEDATA = 0x00000001,
1178 OBD_FL_OBDMDEXISTS = 0x00000002,
1179 OBD_FL_DELORPHAN = 0x00000004, /* if set in o_flags delete orphans */
1180 OBD_FL_NORPC = 0x00000008, /* set in o_flags do in OSC not OST */
1181 OBD_FL_IDONLY = 0x00000010, /* set in o_flags only adjust obj id*/
1182 OBD_FL_RECREATE_OBJS= 0x00000020, /* recreate missing obj */
1183 OBD_FL_DEBUG_CHECK = 0x00000040, /* echo client/server debug check */
1184 OBD_FL_NO_USRQUOTA = 0x00000100, /* the object's owner is over quota */
1185 OBD_FL_NO_GRPQUOTA = 0x00000200, /* the object's group is over quota */
1186 OBD_FL_CREATE_CROW = 0x00000400, /* object should be create on write */
1187 OBD_FL_SRVLOCK = 0x00000800, /* delegate DLM locking to server */
1188 OBD_FL_CKSUM_CRC32 = 0x00001000, /* CRC32 checksum type */
1189 OBD_FL_CKSUM_ADLER = 0x00002000, /* ADLER checksum type */
1190 OBD_FL_CKSUM_RSVD1 = 0x00004000, /* for future cksum types */
1191 OBD_FL_CKSUM_RSVD2 = 0x00008000, /* for future cksum types */
1192 OBD_FL_CKSUM_RSVD3 = 0x00010000, /* for future cksum types */
1193 OBD_FL_SHRINK_GRANT = 0x00020000, /* object shrink the grant */
1195 OBD_FL_CKSUM_ALL = OBD_FL_CKSUM_CRC32 | OBD_FL_CKSUM_ADLER,
1197 /* mask for local-only flag, which won't be sent over network */
1198 OBD_FL_LOCAL_MASK = 0xF0000000,
1199 /* temporary OBDO used by osc_brw_async (see bug 18364) */
1200 OBD_FL_TEMPORARY = 0x10000000,
1203 #define LOV_MAGIC_V1 0x0BD10BD0
1204 #define LOV_MAGIC LOV_MAGIC_V1
1205 #define LOV_MAGIC_JOIN_V1 0x0BD20BD0
1206 #define LOV_MAGIC_V3 0x0BD30BD0
1208 #define LOV_PATTERN_RAID0 0x001 /* stripes are used round-robin */
1209 #define LOV_PATTERN_RAID1 0x002 /* stripes are mirrors of each other */
1210 #define LOV_PATTERN_FIRST 0x100 /* first stripe is not in round-robin */
1211 #define LOV_PATTERN_CMOBD 0x200
1213 #define LOV_OBJECT_GROUP_DEFAULT ~0ULL
1214 #define LOV_OBJECT_GROUP_CLEAR 0ULL
1216 #define lov_ost_data lov_ost_data_v1
1217 struct lov_ost_data_v1 { /* per-stripe data structure (little-endian)*/
1218 __u64 l_object_id; /* OST object ID */
1219 __u64 l_object_seq; /* OST object seq number */
1220 __u32 l_ost_gen; /* generation of this l_ost_idx */
1221 __u32 l_ost_idx; /* OST index in LOV (lov_tgt_desc->tgts) */
1224 #define lov_mds_md lov_mds_md_v1
1225 struct lov_mds_md_v1 { /* LOV EA mds/wire data (little-endian) */
1226 __u32 lmm_magic; /* magic number = LOV_MAGIC_V1 */
1227 __u32 lmm_pattern; /* LOV_PATTERN_RAID0, LOV_PATTERN_RAID1 */
1228 __u64 lmm_object_id; /* LOV object ID */
1229 __u64 lmm_object_seq; /* LOV object seq number */
1230 __u32 lmm_stripe_size; /* size of stripe in bytes */
1231 __u32 lmm_stripe_count; /* num stripes in use for this object */
1232 struct lov_ost_data_v1 lmm_objects[0]; /* per-stripe data */
1235 /* extern void lustre_swab_lov_mds_md(struct lov_mds_md *llm); */
1237 #define MAX_MD_SIZE (sizeof(struct lov_mds_md) + 4 * sizeof(struct lov_ost_data))
1238 #define MIN_MD_SIZE (sizeof(struct lov_mds_md) + 1 * sizeof(struct lov_ost_data))
1240 #define XATTR_NAME_ACL_ACCESS "system.posix_acl_access"
1241 #define XATTR_NAME_ACL_DEFAULT "system.posix_acl_default"
1242 #define XATTR_USER_PREFIX "user."
1243 #define XATTR_TRUSTED_PREFIX "trusted."
1244 #define XATTR_SECURITY_PREFIX "security."
1245 #define XATTR_LUSTRE_PREFIX "lustre."
1247 #define XATTR_NAME_LOV "trusted.lov"
1248 #define XATTR_NAME_LMA "trusted.lma"
1249 #define XATTR_NAME_LMV "trusted.lmv"
1250 #define XATTR_NAME_LINK "trusted.link"
1253 struct lov_mds_md_v3 { /* LOV EA mds/wire data (little-endian) */
1254 __u32 lmm_magic; /* magic number = LOV_MAGIC_V3 */
1255 __u32 lmm_pattern; /* LOV_PATTERN_RAID0, LOV_PATTERN_RAID1 */
1256 __u64 lmm_object_id; /* LOV object ID */
1257 __u64 lmm_object_seq; /* LOV object seq number */
1258 __u32 lmm_stripe_size; /* size of stripe in bytes */
1259 __u32 lmm_stripe_count; /* num stripes in use for this object */
1260 char lmm_pool_name[LOV_MAXPOOLNAME]; /* must be 32bit aligned */
1261 struct lov_ost_data_v1 lmm_objects[0]; /* per-stripe data */
1265 #define OBD_MD_FLID (0x00000001ULL) /* object ID */
1266 #define OBD_MD_FLATIME (0x00000002ULL) /* access time */
1267 #define OBD_MD_FLMTIME (0x00000004ULL) /* data modification time */
1268 #define OBD_MD_FLCTIME (0x00000008ULL) /* change time */
1269 #define OBD_MD_FLSIZE (0x00000010ULL) /* size */
1270 #define OBD_MD_FLBLOCKS (0x00000020ULL) /* allocated blocks count */
1271 #define OBD_MD_FLBLKSZ (0x00000040ULL) /* block size */
1272 #define OBD_MD_FLMODE (0x00000080ULL) /* access bits (mode & ~S_IFMT) */
1273 #define OBD_MD_FLTYPE (0x00000100ULL) /* object type (mode & S_IFMT) */
1274 #define OBD_MD_FLUID (0x00000200ULL) /* user ID */
1275 #define OBD_MD_FLGID (0x00000400ULL) /* group ID */
1276 #define OBD_MD_FLFLAGS (0x00000800ULL) /* flags word */
1277 #define OBD_MD_FLNLINK (0x00002000ULL) /* link count */
1278 #define OBD_MD_FLGENER (0x00004000ULL) /* generation number */
1279 /*#define OBD_MD_FLINLINE (0x00008000ULL) inline data. used until 1.6.5 */
1280 #define OBD_MD_FLRDEV (0x00010000ULL) /* device number */
1281 #define OBD_MD_FLEASIZE (0x00020000ULL) /* extended attribute data */
1282 #define OBD_MD_LINKNAME (0x00040000ULL) /* symbolic link target */
1283 #define OBD_MD_FLHANDLE (0x00080000ULL) /* file/lock handle */
1284 #define OBD_MD_FLCKSUM (0x00100000ULL) /* bulk data checksum */
1285 #define OBD_MD_FLQOS (0x00200000ULL) /* quality of service stats */
1286 /*#define OBD_MD_FLOSCOPQ (0x00400000ULL) osc opaque data, never used */
1287 #define OBD_MD_FLCOOKIE (0x00800000ULL) /* log cancellation cookie */
1288 #define OBD_MD_FLGROUP (0x01000000ULL) /* group */
1289 #define OBD_MD_FLFID (0x02000000ULL) /* ->ost write inline fid */
1290 #define OBD_MD_FLEPOCH (0x04000000ULL) /* ->ost write with ioepoch */
1291 /* ->mds if epoch opens or closes */
1292 #define OBD_MD_FLGRANT (0x08000000ULL) /* ost preallocation space grant */
1293 #define OBD_MD_FLDIREA (0x10000000ULL) /* dir's extended attribute data */
1294 #define OBD_MD_FLUSRQUOTA (0x20000000ULL) /* over quota flags sent from ost */
1295 #define OBD_MD_FLGRPQUOTA (0x40000000ULL) /* over quota flags sent from ost */
1296 #define OBD_MD_FLMODEASIZE (0x80000000ULL) /* EA size will be changed */
1298 #define OBD_MD_MDS (0x0000000100000000ULL) /* where an inode lives on */
1299 #define OBD_MD_REINT (0x0000000200000000ULL) /* reintegrate oa */
1300 #define OBD_MD_MEA (0x0000000400000000ULL) /* CMD split EA */
1301 #define OBD_MD_MDTIDX (0x0000000800000000ULL) /* Get MDT index */
1303 #define OBD_MD_FLXATTR (0x0000001000000000ULL) /* xattr */
1304 #define OBD_MD_FLXATTRLS (0x0000002000000000ULL) /* xattr list */
1305 #define OBD_MD_FLXATTRRM (0x0000004000000000ULL) /* xattr remove */
1306 #define OBD_MD_FLACL (0x0000008000000000ULL) /* ACL */
1307 #define OBD_MD_FLRMTPERM (0x0000010000000000ULL) /* remote permission */
1308 #define OBD_MD_FLMDSCAPA (0x0000020000000000ULL) /* MDS capability */
1309 #define OBD_MD_FLOSSCAPA (0x0000040000000000ULL) /* OSS capability */
1310 #define OBD_MD_FLCKSPLIT (0x0000080000000000ULL) /* Check split on server */
1311 #define OBD_MD_FLCROSSREF (0x0000100000000000ULL) /* Cross-ref case */
1312 #define OBD_MD_FLGETATTRLOCK (0x0000200000000000ULL) /* Get IOEpoch attributes
1314 #define OBD_FL_TRUNC (0x0000200000000000ULL) /* for filter_truncate */
1316 #define OBD_MD_FLRMTLSETFACL (0x0001000000000000ULL) /* lfs lsetfacl case */
1317 #define OBD_MD_FLRMTLGETFACL (0x0002000000000000ULL) /* lfs lgetfacl case */
1318 #define OBD_MD_FLRMTRSETFACL (0x0004000000000000ULL) /* lfs rsetfacl case */
1319 #define OBD_MD_FLRMTRGETFACL (0x0008000000000000ULL) /* lfs rgetfacl case */
1321 #define OBD_MD_FLGETATTR (OBD_MD_FLID | OBD_MD_FLATIME | OBD_MD_FLMTIME | \
1322 OBD_MD_FLCTIME | OBD_MD_FLSIZE | OBD_MD_FLBLKSZ | \
1323 OBD_MD_FLMODE | OBD_MD_FLTYPE | OBD_MD_FLUID | \
1324 OBD_MD_FLGID | OBD_MD_FLFLAGS | OBD_MD_FLNLINK | \
1325 OBD_MD_FLGENER | OBD_MD_FLRDEV | OBD_MD_FLGROUP)
1327 /* don't forget obdo_fid which is way down at the bottom so it can
1328 * come after the definition of llog_cookie */
1331 extern void lustre_swab_obd_statfs (struct obd_statfs *os);
1332 #define OBD_STATFS_NODELAY 0x0001 /* requests should be send without delay
1333 * and resends for avoid deadlocks */
1334 #define OBD_STATFS_FROM_CACHE 0x0002 /* the statfs callback should not update
1336 #define OBD_STATFS_PTLRPCD 0x0004 /* requests will be sent via ptlrpcd
1337 * instead of a specific set. This
1338 * means that we cannot rely on the set
1339 * interpret routine to be called.
1340 * lov_statfs_fini() must thus be called
1341 * by the request interpret routine */
1343 /* ost_body.data values for OST_BRW */
1345 #define OBD_BRW_READ 0x01
1346 #define OBD_BRW_WRITE 0x02
1347 #define OBD_BRW_RWMASK (OBD_BRW_READ | OBD_BRW_WRITE)
1348 #define OBD_BRW_SYNC 0x08 /* this page is a part of synchronous
1349 * transfer and is not accounted in
1351 #define OBD_BRW_CHECK 0x10
1352 #define OBD_BRW_FROM_GRANT 0x20 /* the osc manages this under llite */
1353 #define OBD_BRW_GRANTED 0x40 /* the ost manages this */
1354 #define OBD_BRW_NOCACHE 0x80 /* this page is a part of non-cached IO */
1355 #define OBD_BRW_NOQUOTA 0x100
1356 #define OBD_BRW_SRVLOCK 0x200 /* Client holds no lock over this page */
1357 #define OBD_BRW_MEMALLOC 0x800 /* Client runs in the "kswapd" context */
1359 #define OBD_OBJECT_EOF 0xffffffffffffffffULL
1361 #define OST_MIN_PRECREATE 32
1362 #define OST_MAX_PRECREATE 20000
1371 extern void lustre_swab_obd_ioobj (struct obd_ioobj *ioo);
1373 /* multiple of 8 bytes => can array */
1374 struct niobuf_remote {
1380 extern void lustre_swab_niobuf_remote (struct niobuf_remote *nbr);
1382 /* lock value block communicated between the filter and llite */
1384 /* OST_LVB_ERR_INIT is needed because the return code in rc is
1385 * negative, i.e. because ((MASK + rc) & MASK) != MASK. */
1386 #define OST_LVB_ERR_INIT 0xffbadbad80000000ULL
1387 #define OST_LVB_ERR_MASK 0xffbadbad00000000ULL
1388 #define OST_LVB_IS_ERR(blocks) \
1389 ((blocks & OST_LVB_ERR_MASK) == OST_LVB_ERR_MASK)
1390 #define OST_LVB_SET_ERR(blocks, rc) \
1391 do { blocks = OST_LVB_ERR_INIT + rc; } while (0)
1392 #define OST_LVB_GET_ERR(blocks) (int)(blocks - OST_LVB_ERR_INIT)
1402 extern void lustre_swab_ost_lvb(struct ost_lvb *);
1411 MDS_GETATTR_NAME = 34,
1416 MDS_DISCONNECT = 39,
1422 MDS_DONE_WRITING = 45,
1424 MDS_QUOTACHECK = 47,
1427 MDS_SETXATTR = 50, /* obsolete, now it's MDS_REINT op */
1434 #define MDS_FIRST_OPC MDS_GETATTR
1451 } mds_reint_t, mdt_reint_t;
1453 extern void lustre_swab_generic_32s (__u32 *val);
1455 /* the disposition of the intent outlines what was executed */
1456 #define DISP_IT_EXECD 0x00000001
1457 #define DISP_LOOKUP_EXECD 0x00000002
1458 #define DISP_LOOKUP_NEG 0x00000004
1459 #define DISP_LOOKUP_POS 0x00000008
1460 #define DISP_OPEN_CREATE 0x00000010
1461 #define DISP_OPEN_OPEN 0x00000020
1462 #define DISP_ENQ_COMPLETE 0x00400000
1463 #define DISP_ENQ_OPEN_REF 0x00800000
1464 #define DISP_ENQ_CREATE_REF 0x01000000
1465 #define DISP_OPEN_LOCK 0x02000000
1467 /* INODE LOCK PARTS */
1468 #define MDS_INODELOCK_LOOKUP 0x000001 /* dentry, mode, owner, group */
1469 #define MDS_INODELOCK_UPDATE 0x000002 /* size, links, timestamps */
1470 #define MDS_INODELOCK_OPEN 0x000004 /* For opened files */
1472 /* Do not forget to increase MDS_INODELOCK_MAXSHIFT when adding new bits */
1473 #define MDS_INODELOCK_MAXSHIFT 2
1474 /* This FULL lock is useful to take on unlink sort of operations */
1475 #define MDS_INODELOCK_FULL ((1<<(MDS_INODELOCK_MAXSHIFT+1))-1)
1477 extern void lustre_swab_ll_fid (struct ll_fid *fid);
1479 #define MDS_STATUS_CONN 1
1480 #define MDS_STATUS_LOV 2
1482 struct mds_status_req {
1487 extern void lustre_swab_mds_status_req (struct mds_status_req *r);
1489 /* mdt_thread_info.mti_flags. */
1491 /* The flag indicates Size-on-MDS attributes are changed. */
1492 MF_SOM_CHANGE = (1 << 0),
1493 /* Flags indicates an epoch opens or closes. */
1494 MF_EPOCH_OPEN = (1 << 1),
1495 MF_EPOCH_CLOSE = (1 << 2),
1496 MF_MDC_CANCEL_FID1 = (1 << 3),
1497 MF_MDC_CANCEL_FID2 = (1 << 4),
1498 MF_MDC_CANCEL_FID3 = (1 << 5),
1499 MF_MDC_CANCEL_FID4 = (1 << 6),
1500 /* There is a pending attribute update. */
1501 MF_SOM_AU = (1 << 7),
1502 /* Cancel OST locks while getattr OST attributes. */
1503 MF_GETATTR_LOCK = (1 << 8),
1506 #define MF_SOM_LOCAL_FLAGS (MF_SOM_CHANGE | MF_EPOCH_OPEN | MF_EPOCH_CLOSE)
1508 #define MDS_BFLAG_UNCOMMITTED_WRITES 0x1
1510 /* these should be identical to their EXT3_*_FL counterparts, and are
1511 * redefined here only to avoid dragging in ext3_fs.h */
1512 #define MDS_SYNC_FL 0x00000008 /* Synchronous updates */
1513 #define MDS_IMMUTABLE_FL 0x00000010 /* Immutable file */
1514 #define MDS_APPEND_FL 0x00000020 /* writes to file may only append */
1515 #define MDS_NOATIME_FL 0x00000080 /* do not update atime */
1516 #define MDS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (dir only) */
1519 /* Convert wire MDS_*_FL to corresponding client local VFS S_* values
1520 * for the client inode i_flags. The MDS_*_FL are the Lustre wire
1521 * protocol equivalents of LDISKFS_*_FL values stored on disk, while
1522 * the S_* flags are kernel-internal values that change between kernel
1523 * versions. These flags are set/cleared via FSFILT_IOC_{GET,SET}_FLAGS.
1524 * See b=16526 for a full history. */
1525 static inline int ll_ext_to_inode_flags(int flags)
1527 return (((flags & MDS_SYNC_FL) ? S_SYNC : 0) |
1528 ((flags & MDS_NOATIME_FL) ? S_NOATIME : 0) |
1529 ((flags & MDS_APPEND_FL) ? S_APPEND : 0) |
1530 #if defined(S_DIRSYNC)
1531 ((flags & MDS_DIRSYNC_FL) ? S_DIRSYNC : 0) |
1533 ((flags & MDS_IMMUTABLE_FL) ? S_IMMUTABLE : 0));
1536 static inline int ll_inode_to_ext_flags(int iflags)
1538 return (((iflags & S_SYNC) ? MDS_SYNC_FL : 0) |
1539 ((iflags & S_NOATIME) ? MDS_NOATIME_FL : 0) |
1540 ((iflags & S_APPEND) ? MDS_APPEND_FL : 0) |
1541 #if defined(S_DIRSYNC)
1542 ((iflags & S_DIRSYNC) ? MDS_DIRSYNC_FL : 0) |
1544 ((iflags & S_IMMUTABLE) ? MDS_IMMUTABLE_FL : 0));
1549 * while mds_body is to interact with 1.6, mdt_body is to interact with 2.0.
1550 * both of them should have the same fields layout, because at client side
1551 * one could be dynamically cast to the other.
1553 * mdt_body has large size than mds_body, with unused padding (48 bytes)
1554 * at the end. client always use size of mdt_body to prepare request/reply
1555 * buffers, and actual data could be interepeted as mdt_body or mds_body
1561 struct lustre_handle handle;
1563 __u64 size; /* Offset, in the case of MDS_READPAGE */
1567 __u64 blocks; /* XID, in the case of MDS_READPAGE */
1576 __u32 flags; /* from vfs for pin/unpin, MDS_BFLAG for close */
1578 __u32 nlink; /* #bytes to read in the case of MDS_READPAGE */
1584 __u32 max_cookiesize;
1585 __u32 padding_4; /* also fix lustre_swab_mds_body */
1588 extern void lustre_swab_mds_body (struct mds_body *b);
1593 struct lustre_handle handle;
1595 __u64 size; /* Offset, in the case of MDS_READPAGE */
1599 __u64 blocks; /* XID, in the case of MDS_READPAGE */
1601 __u64 ino; /* for 1.6 compatibility */
1608 __u32 flags; /* from vfs for pin/unpin, MDS_BFLAG for close */
1610 __u32 nlink; /* #bytes to read in the case of MDS_READPAGE */
1611 __u32 generation; /* for 1.6 compatibility */
1616 __u32 max_cookiesize;
1617 __u32 padding_4; /* also fix lustre_swab_mdt_body */
1626 extern void lustre_swab_mdt_body (struct mdt_body *b);
1628 struct mdt_ioepoch {
1629 struct lustre_handle handle;
1635 extern void lustre_swab_mdt_ioepoch (struct mdt_ioepoch *b);
1637 #define Q_QUOTACHECK 0x800100
1638 #define Q_INITQUOTA 0x800101 /* init slave limits */
1639 #define Q_GETOINFO 0x800102 /* get obd quota info */
1640 #define Q_GETOQUOTA 0x800103 /* get obd quotas */
1641 #define Q_FINVALIDATE 0x800104 /* invalidate operational quotas */
1643 #define Q_TYPEMATCH(id, type) \
1644 ((id) == (type) || (id) == UGQUOTA)
1646 #define Q_TYPESET(oqc, type) Q_TYPEMATCH((oqc)->qc_type, type)
1648 #define Q_GETOCMD(oqc) \
1649 ((oqc)->qc_cmd == Q_GETOINFO || (oqc)->qc_cmd == Q_GETOQUOTA)
1651 #define QCTL_COPY(out, in) \
1653 Q_COPY(out, in, qc_cmd); \
1654 Q_COPY(out, in, qc_type); \
1655 Q_COPY(out, in, qc_id); \
1656 Q_COPY(out, in, qc_stat); \
1657 Q_COPY(out, in, qc_dqinfo); \
1658 Q_COPY(out, in, qc_dqblk); \
1661 struct obd_quotactl {
1666 struct obd_dqinfo qc_dqinfo;
1667 struct obd_dqblk qc_dqblk;
1670 extern void lustre_swab_obd_quotactl(struct obd_quotactl *q);
1672 struct quota_adjust_qunit {
1679 extern void lustre_swab_quota_adjust_qunit(struct quota_adjust_qunit *q);
1681 /* flags is shared among quota structures */
1682 #define LQUOTA_FLAGS_GRP 1UL /* 0 is user, 1 is group */
1683 #define LQUOTA_FLAGS_BLK 2UL /* 0 is inode, 1 is block */
1684 #define LQUOTA_FLAGS_ADJBLK 4UL /* adjust the block qunit size */
1685 #define LQUOTA_FLAGS_ADJINO 8UL /* adjust the inode qunit size */
1686 #define LQUOTA_FLAGS_CHG_QS 16UL /* indicate whether it has capability of
1687 * OBD_CONNECT_CHANGE_QS */
1689 /* flags is specific for quota_adjust_qunit */
1690 #define LQUOTA_QAQ_CREATE_LQS (1 << 31) /* when it is set, need create lqs */
1692 /* the status of lqs_flags in struct lustre_qunit_size */
1693 #define LQUOTA_QUNIT_FLAGS (LQUOTA_FLAGS_GRP | LQUOTA_FLAGS_BLK)
1695 #define QAQ_IS_GRP(qaq) ((qaq)->qaq_flags & LQUOTA_FLAGS_GRP)
1696 #define QAQ_IS_ADJBLK(qaq) ((qaq)->qaq_flags & LQUOTA_FLAGS_ADJBLK)
1697 #define QAQ_IS_ADJINO(qaq) ((qaq)->qaq_flags & LQUOTA_FLAGS_ADJINO)
1698 #define QAQ_IS_CREATE_LQS(qaq) ((qaq)->qaq_flags & LQUOTA_QAQ_CREATE_LQS)
1700 #define QAQ_SET_GRP(qaq) ((qaq)->qaq_flags |= LQUOTA_FLAGS_GRP)
1701 #define QAQ_SET_ADJBLK(qaq) ((qaq)->qaq_flags |= LQUOTA_FLAGS_ADJBLK)
1702 #define QAQ_SET_ADJINO(qaq) ((qaq)->qaq_flags |= LQUOTA_FLAGS_ADJINO)
1703 #define QAQ_SET_CREATE_LQS(qaq) ((qaq)->qaq_flags |= LQUOTA_QAQ_CREATE_LQS)
1705 /* inode access permission for remote user, the inode info are omitted,
1706 * for client knows them. */
1707 struct mds_remote_perm {
1712 __u32 rp_access_perm; /* MAY_READ/WRITE/EXEC */
1715 /* permissions for md_perm.mp_perm */
1717 CFS_SETUID_PERM = 0x01,
1718 CFS_SETGID_PERM = 0x02,
1719 CFS_SETGRP_PERM = 0x04,
1720 CFS_RMTACL_PERM = 0x08,
1721 CFS_RMTOWN_PERM = 0x10
1724 extern void lustre_swab_mds_remote_perm(struct mds_remote_perm *p);
1726 struct mdt_remote_perm {
1731 __u32 rp_access_perm; /* MAY_READ/WRITE/EXEC */
1734 extern void lustre_swab_mdt_remote_perm(struct mdt_remote_perm *p);
1736 struct mdt_rec_setattr {
1746 __u32 sa_padding_1_h;
1747 struct lu_fid sa_fid;
1756 __u32 sa_attr_flags;
1764 extern void lustre_swab_mdt_rec_setattr (struct mdt_rec_setattr *sa);
1767 * Attribute flags used in mdt_rec_setattr::sa_valid.
1768 * The kernel's #defines for ATTR_* should not be used over the network
1769 * since the client and MDS may run different kernels (see bug 13828)
1770 * Therefore, we should only use MDS_ATTR_* attributes for sa_valid.
1772 #define MDS_ATTR_MODE 0x1ULL /* = 1 */
1773 #define MDS_ATTR_UID 0x2ULL /* = 2 */
1774 #define MDS_ATTR_GID 0x4ULL /* = 4 */
1775 #define MDS_ATTR_SIZE 0x8ULL /* = 8 */
1776 #define MDS_ATTR_ATIME 0x10ULL /* = 16 */
1777 #define MDS_ATTR_MTIME 0x20ULL /* = 32 */
1778 #define MDS_ATTR_CTIME 0x40ULL /* = 64 */
1779 #define MDS_ATTR_ATIME_SET 0x80ULL /* = 128 */
1780 #define MDS_ATTR_MTIME_SET 0x100ULL /* = 256 */
1781 #define MDS_ATTR_FORCE 0x200ULL /* = 512, Not a change, but a change it */
1782 #define MDS_ATTR_ATTR_FLAG 0x400ULL /* = 1024 */
1783 #define MDS_ATTR_KILL_SUID 0x800ULL /* = 2048 */
1784 #define MDS_ATTR_KILL_SGID 0x1000ULL /* = 4096 */
1785 #define MDS_ATTR_CTIME_SET 0x2000ULL /* = 8192 */
1786 #define MDS_ATTR_FROM_OPEN 0x4000ULL /* = 16384, called from open path, ie O_TRUNC */
1787 #define MDS_ATTR_BLOCKS 0x8000ULL /* = 32768 */
1790 #define FMODE_READ 00000001
1791 #define FMODE_WRITE 00000002
1794 /* IO Epoch is opened on a closed file. */
1795 #define FMODE_EPOCH 01000000
1796 /* IO Epoch is opened on a file truncate. */
1797 #define FMODE_TRUNC 02000000
1798 /* Size-on-MDS Attribute Update is pending. */
1799 #define FMODE_SOM 04000000
1800 #define FMODE_CLOSED 0
1802 #define MDS_OPEN_CREATED 00000010
1803 #define MDS_OPEN_CROSS 00000020
1805 #define MDS_FMODE_EXEC 00000004
1806 #define MDS_OPEN_CREAT 00000100
1807 #define MDS_OPEN_EXCL 00000200
1808 #define MDS_OPEN_TRUNC 00001000
1809 #define MDS_OPEN_APPEND 00002000
1810 #define MDS_OPEN_SYNC 00010000
1811 #define MDS_OPEN_DIRECTORY 00200000
1813 #define MDS_OPEN_DELAY_CREATE 0100000000 /* delay initial object create */
1814 #define MDS_OPEN_OWNEROVERRIDE 0200000000 /* NFSD rw-reopen ro file for owner */
1815 #define MDS_OPEN_JOIN_FILE 0400000000 /* open for join file.
1816 * We do not support JOIN FILE
1817 * anymore, reserve this flags
1818 * just for preventing such bit
1820 #define MDS_CREATE_RMT_ACL 01000000000 /* indicate create on remote server
1821 * with default ACL */
1822 #define MDS_CREATE_SLAVE_OBJ 02000000000 /* indicate create slave object
1823 * actually, this is for create, not
1824 * conflict with other open flags */
1825 #define MDS_OPEN_LOCK 04000000000 /* This open requires open lock */
1826 #define MDS_OPEN_HAS_EA 010000000000 /* specify object create pattern */
1827 #define MDS_OPEN_HAS_OBJS 020000000000 /* Just set the EA the obj exist */
1829 /* permission for create non-directory file */
1830 #define MAY_CREATE (1 << 7)
1831 /* permission for create directory file */
1832 #define MAY_LINK (1 << 8)
1833 /* permission for delete from the directory */
1834 #define MAY_UNLINK (1 << 9)
1835 /* source's permission for rename */
1836 #define MAY_RENAME_SRC (1 << 10)
1837 /* target's permission for rename */
1838 #define MAY_RENAME_TAR (1 << 11)
1839 /* part (parent's) VTX permission check */
1840 #define MAY_VTX_PART (1 << 12)
1841 /* full VTX permission check */
1842 #define MAY_VTX_FULL (1 << 13)
1843 /* lfs rgetfacl permission check */
1844 #define MAY_RGETFACL (1 << 14)
1847 MDS_CHECK_SPLIT = 1 << 0,
1848 MDS_CROSS_REF = 1 << 1,
1849 MDS_VTX_BYPASS = 1 << 2,
1850 MDS_PERM_BYPASS = 1 << 3,
1852 MDS_QUOTA_IGNORE = 1 << 5,
1853 MDS_CLOSE_CLEANUP = 1 << 6
1856 struct mdt_rec_create {
1864 __u32 cr_suppgid1_h;
1866 __u32 cr_suppgid2_h;
1867 struct lu_fid cr_fid1;
1868 struct lu_fid cr_fid2;
1869 struct lustre_handle cr_old_handle; /* handle in case of open replay */
1873 __u64 cr_padding_1; /* pad for 64 bits*/
1876 __u32 cr_flags; /* for use with open */
1882 struct mdt_rec_link {
1890 __u32 lk_suppgid1_h;
1892 __u32 lk_suppgid2_h;
1893 struct lu_fid lk_fid1;
1894 struct lu_fid lk_fid2;
1908 struct mdt_rec_unlink {
1916 __u32 ul_suppgid1_h;
1918 __u32 ul_suppgid2_h;
1919 struct lu_fid ul_fid1;
1920 struct lu_fid ul_fid2;
1934 struct mdt_rec_rename {
1942 __u32 rn_suppgid1_h;
1944 __u32 rn_suppgid2_h;
1945 struct lu_fid rn_fid1;
1946 struct lu_fid rn_fid2;
1952 __u32 rn_bias; /* some operation flags */
1953 __u32 rn_mode; /* cross-ref rename has mode */
1960 struct mdt_rec_setxattr {
1968 __u32 sx_suppgid1_h;
1970 __u32 sx_suppgid2_h;
1971 struct lu_fid sx_fid;
1972 __u64 sx_padding_1; /* These three members are lu_fid size */
1984 __u32 sx_padding_10;
1985 __u32 sx_padding_11;
1988 struct mdt_rec_reint {
1996 __u32 rr_suppgid1_h;
1998 __u32 rr_suppgid2_h;
1999 struct lu_fid rr_fid1;
2000 struct lu_fid rr_fid2;
2008 __u32 rr_padding_1; /* also fix lustre_swab_mdt_rec_reint */
2009 __u32 rr_padding_2; /* also fix lustre_swab_mdt_rec_reint */
2010 __u32 rr_padding_3; /* also fix lustre_swab_mdt_rec_reint */
2011 __u32 rr_padding_4; /* also fix lustre_swab_mdt_rec_reint */
2014 extern void lustre_swab_mdt_rec_reint(struct mdt_rec_reint *rr);
2017 __u32 ld_tgt_count; /* how many MDS's */
2018 __u32 ld_active_tgt_count; /* how many active */
2019 __u32 ld_default_stripe_count; /* how many objects are used */
2020 __u32 ld_pattern; /* default MEA_MAGIC_* */
2021 __u64 ld_default_hash_size;
2022 __u64 ld_padding_1; /* also fix lustre_swab_lmv_desc */
2023 __u32 ld_padding_2; /* also fix lustre_swab_lmv_desc */
2024 __u32 ld_qos_maxage; /* in second */
2025 __u32 ld_padding_3; /* also fix lustre_swab_lmv_desc */
2026 __u32 ld_padding_4; /* also fix lustre_swab_lmv_desc */
2027 struct obd_uuid ld_uuid;
2030 extern void lustre_swab_lmv_desc (struct lmv_desc *ld);
2032 /* TODO: lmv_stripe_md should contain mds capabilities for all slave fids */
2033 struct lmv_stripe_md {
2038 char mea_pool_name[LOV_MAXPOOLNAME];
2039 struct lu_fid mea_ids[0];
2042 extern void lustre_swab_lmv_stripe_md(struct lmv_stripe_md *mea);
2044 /* lmv structures */
2045 #define MEA_MAGIC_LAST_CHAR 0xb2221ca1
2046 #define MEA_MAGIC_ALL_CHARS 0xb222a11c
2047 #define MEA_MAGIC_HASH_SEGMENT 0xb222a11b
2049 #define MAX_HASH_SIZE_32 0x7fffffffUL
2050 #define MAX_HASH_SIZE 0x7fffffffffffffffULL
2051 #define MAX_HASH_HIGHEST_BIT 0x1000000000000000ULL
2058 extern void lustre_swab_md_fld (struct md_fld *mf);
2063 FLD_FIRST_OPC = FLD_QUERY
2069 SEQ_FIRST_OPC = SEQ_QUERY
2073 SEQ_ALLOC_SUPER = 0,
2078 * LOV data structures
2081 #define LOV_MIN_STRIPE_BITS 16 /* maximum PAGE_SIZE (ia64), power of 2 */
2082 #define LOV_MIN_STRIPE_SIZE (1<<LOV_MIN_STRIPE_BITS)
2083 #define LOV_MAX_STRIPE_COUNT 160 /* until bug 4424 is fixed */
2084 #define LOV_V1_INSANE_STRIPE_COUNT 65532 /* maximum stripe count bz13933 */
2086 #define LOV_MAX_UUID_BUFFER_SIZE 8192
2087 /* The size of the buffer the lov/mdc reserves for the
2088 * array of UUIDs returned by the MDS. With the current
2089 * protocol, this will limit the max number of OSTs per LOV */
2091 #define LOV_DESC_MAGIC 0xB0CCDE5C
2093 /* LOV settings descriptor (should only contain static info) */
2095 __u32 ld_tgt_count; /* how many OBD's */
2096 __u32 ld_active_tgt_count; /* how many active */
2097 __u32 ld_default_stripe_count; /* how many objects are used */
2098 __u32 ld_pattern; /* default PATTERN_RAID0 */
2099 __u64 ld_default_stripe_size; /* in bytes */
2100 __u64 ld_default_stripe_offset; /* in bytes */
2101 __u32 ld_padding_0; /* unused */
2102 __u32 ld_qos_maxage; /* in second */
2103 __u32 ld_padding_1; /* also fix lustre_swab_lov_desc */
2104 __u32 ld_padding_2; /* also fix lustre_swab_lov_desc */
2105 struct obd_uuid ld_uuid;
2108 #define ld_magic ld_active_tgt_count /* for swabbing from llogs */
2110 extern void lustre_swab_lov_desc (struct lov_desc *ld);
2115 /* opcodes -- MUST be distinct from OST/MDS opcodes */
2120 LDLM_BL_CALLBACK = 104,
2121 LDLM_CP_CALLBACK = 105,
2122 LDLM_GL_CALLBACK = 106,
2123 LDLM_SET_INFO = 107,
2126 #define LDLM_FIRST_OPC LDLM_ENQUEUE
2128 #define RES_NAME_SIZE 4
2129 struct ldlm_res_id {
2130 __u64 name[RES_NAME_SIZE];
2133 extern void lustre_swab_ldlm_res_id (struct ldlm_res_id *id);
2149 #define LCK_MODE_NUM 8
2159 #define LDLM_MIN_TYPE LDLM_PLAIN
2161 struct ldlm_extent {
2167 static inline int ldlm_extent_overlap(struct ldlm_extent *ex1,
2168 struct ldlm_extent *ex2)
2170 return (ex1->start <= ex2->end) && (ex2->start <= ex1->end);
2173 struct ldlm_inodebits {
2180 __u64 blocking_export; /* not actually used over the wire */
2181 __u32 blocking_pid; /* not actually used over the wire */
2185 /* it's important that the fields of the ldlm_extent structure match
2186 * the first fields of the ldlm_flock structure because there is only
2187 * one ldlm_swab routine to process the ldlm_policy_data_t union. if
2188 * this ever changes we will need to swab the union differently based
2189 * on the resource type. */
2192 struct ldlm_extent l_extent;
2193 struct ldlm_flock l_flock;
2194 struct ldlm_inodebits l_inodebits;
2195 } ldlm_policy_data_t;
2197 extern void lustre_swab_ldlm_policy_data (ldlm_policy_data_t *d);
2199 struct ldlm_intent {
2203 extern void lustre_swab_ldlm_intent (struct ldlm_intent *i);
2205 struct ldlm_resource_desc {
2206 ldlm_type_t lr_type;
2207 __u32 lr_padding; /* also fix lustre_swab_ldlm_resource_desc */
2208 struct ldlm_res_id lr_name;
2211 extern void lustre_swab_ldlm_resource_desc (struct ldlm_resource_desc *r);
2213 struct ldlm_lock_desc {
2214 struct ldlm_resource_desc l_resource;
2215 ldlm_mode_t l_req_mode;
2216 ldlm_mode_t l_granted_mode;
2217 ldlm_policy_data_t l_policy_data;
2220 extern void lustre_swab_ldlm_lock_desc (struct ldlm_lock_desc *l);
2222 #define LDLM_LOCKREQ_HANDLES 2
2223 #define LDLM_ENQUEUE_CANCEL_OFF 1
2225 struct ldlm_request {
2228 struct ldlm_lock_desc lock_desc;
2229 struct lustre_handle lock_handle[LDLM_LOCKREQ_HANDLES];
2232 extern void lustre_swab_ldlm_request (struct ldlm_request *rq);
2234 /* If LDLM_ENQUEUE, 1 slot is already occupied, 1 is available.
2235 * Otherwise, 2 are available. */
2236 #define ldlm_request_bufsize(count,type) \
2238 int _avail = LDLM_LOCKREQ_HANDLES; \
2239 _avail -= (type == LDLM_ENQUEUE ? LDLM_ENQUEUE_CANCEL_OFF : 0); \
2240 sizeof(struct ldlm_request) + \
2241 (count > _avail ? count - _avail : 0) * \
2242 sizeof(struct lustre_handle); \
2247 __u32 lock_padding; /* also fix lustre_swab_ldlm_reply */
2248 struct ldlm_lock_desc lock_desc;
2249 struct lustre_handle lock_handle;
2250 __u64 lock_policy_res1;
2251 __u64 lock_policy_res2;
2254 extern void lustre_swab_ldlm_reply (struct ldlm_reply *r);
2257 * Opcodes for mountconf (mgs and mgc)
2262 MGS_EXCEPTION, /* node died, etc. */
2263 MGS_TARGET_REG, /* whenever target starts up */
2268 #define MGS_FIRST_OPC MGS_CONNECT
2270 #define MGS_PARAM_MAXLEN 1024
2271 #define KEY_SET_INFO "set_info"
2273 struct mgs_send_param {
2274 char mgs_param[MGS_PARAM_MAXLEN];
2277 /* We pass this info to the MGS so it can write config logs */
2278 #define MTI_NAME_MAXLEN 64
2279 #define MTI_PARAM_MAXLEN 4096
2280 #define MTI_NIDS_MAX 32
2281 struct mgs_target_info {
2282 __u32 mti_lustre_ver;
2283 __u32 mti_stripe_index;
2284 __u32 mti_config_ver;
2286 __u32 mti_nid_count;
2287 __u32 padding; /* 64 bit align */
2288 char mti_fsname[MTI_NAME_MAXLEN];
2289 char mti_svname[MTI_NAME_MAXLEN];
2290 char mti_uuid[sizeof(struct obd_uuid)];
2291 __u64 mti_nids[MTI_NIDS_MAX]; /* host nids (lnet_nid_t)*/
2292 char mti_params[MTI_PARAM_MAXLEN];
2295 extern void lustre_swab_mgs_target_info(struct mgs_target_info *oinfo);
2297 /* Config marker flags (in config log) */
2298 #define CM_START 0x01
2300 #define CM_SKIP 0x04
2301 #define CM_UPGRADE146 0x08
2302 #define CM_EXCLUDE 0x10
2303 #define CM_START_SKIP (CM_START | CM_SKIP)
2306 __u32 cm_step; /* aka config version */
2308 __u32 cm_vers; /* lustre release version number */
2309 __u32 padding; /* 64 bit align */
2310 __u64 cm_createtime; /*when this record was first created */
2311 __u64 cm_canceltime; /*when this record is no longer valid*/
2312 char cm_tgtname[MTI_NAME_MAXLEN];
2313 char cm_comment[MTI_NAME_MAXLEN];
2316 extern void lustre_swab_cfg_marker(struct cfg_marker *marker,
2317 int swab, int size);
2320 * Opcodes for multiple servers.
2329 #define OBD_FIRST_OPC OBD_PING
2331 /* catalog of log objects */
2333 /** Identifier for a single log object */
2338 } __attribute__((packed));
2340 /** Records written to the CATALOGS list */
2341 #define CATLIST "CATALOGS"
2343 struct llog_logid lci_logid;
2347 } __attribute__((packed));
2349 /* Log data record types - there is no specific reason that these need to
2350 * be related to the RPC opcodes, but no reason not to (may be handy later?)
2352 #define LLOG_OP_MAGIC 0x10600000
2353 #define LLOG_OP_MASK 0xfff00000
2356 LLOG_PAD_MAGIC = LLOG_OP_MAGIC | 0x00000,
2357 OST_SZ_REC = LLOG_OP_MAGIC | 0x00f00,
2358 OST_RAID1_REC = LLOG_OP_MAGIC | 0x01000,
2359 MDS_UNLINK_REC = LLOG_OP_MAGIC | 0x10000 | (MDS_REINT << 8) | REINT_UNLINK,
2360 MDS_SETATTR_REC = LLOG_OP_MAGIC | 0x10000 | (MDS_REINT << 8) | REINT_SETATTR,
2361 MDS_SETATTR64_REC = LLOG_OP_MAGIC | 0x90000 | (MDS_REINT << 8) | REINT_SETATTR,
2362 OBD_CFG_REC = LLOG_OP_MAGIC | 0x20000,
2363 PTL_CFG_REC = LLOG_OP_MAGIC | 0x30000, /* obsolete */
2364 LLOG_GEN_REC = LLOG_OP_MAGIC | 0x40000,
2365 LLOG_JOIN_REC = LLOG_OP_MAGIC | 0x50000, /* obsolete */
2366 CHANGELOG_REC = LLOG_OP_MAGIC | 0x60000,
2367 CHANGELOG_USER_REC = LLOG_OP_MAGIC | 0x70000,
2368 LLOG_HDR_MAGIC = LLOG_OP_MAGIC | 0x45539,
2369 LLOG_LOGID_MAGIC = LLOG_OP_MAGIC | 0x4553b,
2373 * for now, continue to support old pad records which have 0 for their
2374 * type but still need to be swabbed for their length
2376 #define LLOG_REC_HDR_NEEDS_SWABBING(r) \
2377 (((r)->lrh_type & __swab32(LLOG_OP_MASK)) == \
2378 __swab32(LLOG_OP_MAGIC) || \
2379 (((r)->lrh_type == 0) && ((r)->lrh_len > LLOG_CHUNK_SIZE)))
2381 /** Log record header - stored in little endian order.
2382 * Each record must start with this struct, end with a llog_rec_tail,
2383 * and be a multiple of 256 bits in size.
2385 struct llog_rec_hdr {
2392 struct llog_rec_tail {
2397 struct llog_logid_rec {
2398 struct llog_rec_hdr lid_hdr;
2399 struct llog_logid lid_id;
2405 struct llog_rec_tail lid_tail;
2406 } __attribute__((packed));
2408 struct llog_create_rec {
2409 struct llog_rec_hdr lcr_hdr;
2410 struct ll_fid lcr_fid;
2414 struct llog_rec_tail lcr_tail;
2415 } __attribute__((packed));
2417 struct llog_orphan_rec {
2418 struct llog_rec_hdr lor_hdr;
2422 struct llog_rec_tail lor_tail;
2423 } __attribute__((packed));
2425 struct llog_unlink_rec {
2426 struct llog_rec_hdr lur_hdr;
2429 obd_count lur_count;
2430 struct llog_rec_tail lur_tail;
2431 } __attribute__((packed));
2433 struct llog_setattr_rec {
2434 struct llog_rec_hdr lsr_hdr;
2440 struct llog_rec_tail lsr_tail;
2441 } __attribute__((packed));
2443 struct llog_setattr64_rec {
2444 struct llog_rec_hdr lsr_hdr;
2452 struct llog_rec_tail lsr_tail;
2453 } __attribute__((packed));
2455 struct llog_size_change_rec {
2456 struct llog_rec_hdr lsc_hdr;
2457 struct ll_fid lsc_fid;
2460 struct llog_rec_tail lsc_tail;
2461 } __attribute__((packed));
2463 #define CHANGELOG_MAGIC 0xca103000
2465 /** \a changelog_rec_type's that can't be masked */
2466 #define CHANGELOG_MINMASK (1 << CL_MARK)
2467 /** bits covering all \a changelog_rec_type's */
2468 #define CHANGELOG_ALLMASK 0XFFFFFFFF
2469 /** default \a changelog_rec_type mask */
2470 #define CHANGELOG_DEFMASK CHANGELOG_ALLMASK
2472 /* changelog llog name, needed by client replicators */
2473 #define CHANGELOG_CATALOG "changelog_catalog"
2475 struct changelog_setinfo {
2478 } __attribute__((packed));
2480 /** changelog record */
2481 struct llog_changelog_rec {
2482 struct llog_rec_hdr cr_hdr;
2483 struct changelog_rec cr;
2484 struct llog_rec_tail cr_tail; /**< for_sizezof_only */
2485 } __attribute__((packed));
2487 #define CHANGELOG_USER_PREFIX "cl"
2489 struct llog_changelog_user_rec {
2490 struct llog_rec_hdr cur_hdr;
2494 struct llog_rec_tail cur_tail;
2495 } __attribute__((packed));
2500 } __attribute__((packed));
2502 struct llog_gen_rec {
2503 struct llog_rec_hdr lgr_hdr;
2504 struct llog_gen lgr_gen;
2505 struct llog_rec_tail lgr_tail;
2507 /* On-disk header structure of each log object, stored in little endian order */
2508 #define LLOG_CHUNK_SIZE 8192
2509 #define LLOG_HEADER_SIZE (96)
2510 #define LLOG_BITMAP_BYTES (LLOG_CHUNK_SIZE - LLOG_HEADER_SIZE)
2512 #define LLOG_MIN_REC_SIZE (24) /* round(llog_rec_hdr + llog_rec_tail) */
2514 /* flags for the logs */
2515 #define LLOG_F_ZAP_WHEN_EMPTY 0x1
2516 #define LLOG_F_IS_CAT 0x2
2517 #define LLOG_F_IS_PLAIN 0x4
2519 struct llog_log_hdr {
2520 struct llog_rec_hdr llh_hdr;
2521 __u64 llh_timestamp;
2523 __u32 llh_bitmap_offset;
2527 /* for a catalog the first plain slot is next to it */
2528 struct obd_uuid llh_tgtuuid;
2529 __u32 llh_reserved[LLOG_HEADER_SIZE/sizeof(__u32) - 23];
2530 __u32 llh_bitmap[LLOG_BITMAP_BYTES/sizeof(__u32)];
2531 struct llog_rec_tail llh_tail;
2532 } __attribute__((packed));
2534 #define LLOG_BITMAP_SIZE(llh) ((llh->llh_hdr.lrh_len - \
2535 llh->llh_bitmap_offset - \
2536 sizeof(llh->llh_tail)) * 8)
2538 /** log cookies are used to reference a specific log file and a record therein */
2539 struct llog_cookie {
2540 struct llog_logid lgc_lgl;
2544 } __attribute__((packed));
2546 /** llog protocol */
2547 enum llogd_rpc_ops {
2548 LLOG_ORIGIN_HANDLE_CREATE = 501,
2549 LLOG_ORIGIN_HANDLE_NEXT_BLOCK = 502,
2550 LLOG_ORIGIN_HANDLE_READ_HEADER = 503,
2551 LLOG_ORIGIN_HANDLE_WRITE_REC = 504,
2552 LLOG_ORIGIN_HANDLE_CLOSE = 505,
2553 LLOG_ORIGIN_CONNECT = 506,
2554 LLOG_CATINFO = 507, /* for lfs catinfo */
2555 LLOG_ORIGIN_HANDLE_PREV_BLOCK = 508,
2556 LLOG_ORIGIN_HANDLE_DESTROY = 509, /* for destroy llog object*/
2558 LLOG_FIRST_OPC = LLOG_ORIGIN_HANDLE_CREATE
2562 struct llog_logid lgd_logid;
2564 __u32 lgd_llh_flags;
2566 __u32 lgd_saved_index;
2568 __u64 lgd_cur_offset;
2569 } __attribute__((packed));
2571 struct llogd_conn_body {
2572 struct llog_gen lgdc_gen;
2573 struct llog_logid lgdc_logid;
2574 __u32 lgdc_ctxt_idx;
2575 } __attribute__((packed));
2577 /* Note: 64-bit types are 64-bit aligned in structure */
2579 obd_valid o_valid; /* hot fields in this obdo */
2581 obd_id o_parent_seq;
2582 obd_size o_size; /* o_size-o_blocks == ost_lvb */
2586 obd_blocks o_blocks; /* brw: cli sent cached bytes */
2589 /* 32-bit fields start here: keep an even number of them via padding */
2590 obd_blksize o_blksize; /* optimal IO blocksize */
2591 obd_mode o_mode; /* brw: cli sent cache remain */
2595 obd_count o_nlink; /* brw: checksum */
2596 obd_count o_parent_oid;
2597 obd_count o_misc; /* brw: o_dropped */
2598 __u64 o_ioepoch; /* epoch in ost writes */
2599 __u32 o_stripe_idx; /* holds stripe idx */
2601 struct lustre_handle o_handle; /* brw: lock handle to prolong locks */
2602 struct llog_cookie o_lcookie; /* destroy: unlink cookie from MDS */
2611 #define o_id o_oi.oi_id
2612 #define o_seq o_oi.oi_seq
2613 #define o_dirty o_blocks
2614 #define o_undirty o_mode
2615 #define o_dropped o_misc
2616 #define o_cksum o_nlink
2618 static inline void obdo_unpack_ostid(struct obdo *oa, struct ost_id *ostid)
2620 ostid->oi_id = ostid_id(&oa->o_oi);
2621 ostid->oi_seq = ostid_seq(&oa->o_oi);
2624 static inline void lustre_set_wire_obdo(struct obdo *wobdo, struct obdo *lobdo)
2626 memcpy(wobdo, lobdo, sizeof(*lobdo));
2627 wobdo->o_flags &= ~OBD_FL_LOCAL_MASK;
2630 static inline void lustre_get_wire_obdo(struct obdo *lobdo, struct obdo *wobdo)
2632 obd_flag local_flags = lobdo->o_flags & OBD_FL_LOCAL_MASK;
2634 LASSERT(!(wobdo->o_flags & OBD_FL_LOCAL_MASK));
2636 memcpy(lobdo, wobdo, sizeof(*lobdo));
2637 lobdo->o_flags &= ~OBD_FL_LOCAL_MASK;
2638 lobdo->o_flags |= local_flags;
2641 extern void lustre_swab_obdo (struct obdo *o);
2643 /* request structure for OST's */
2648 /* Key for FIEMAP to be used in get_info calls */
2649 struct ll_fiemap_info_key {
2652 struct ll_user_fiemap fiemap;
2655 extern void lustre_swab_ost_body (struct ost_body *b);
2656 extern void lustre_swab_ost_last_id(obd_id *id);
2657 extern void lustre_swab_fiemap(struct ll_user_fiemap *fiemap);
2659 extern void lustre_swab_lov_user_md_v1(struct lov_user_md_v1 *lum);
2660 extern void lustre_swab_lov_user_md_v3(struct lov_user_md_v3 *lum);
2661 extern void lustre_swab_lov_user_md_objects(struct lov_user_ost_data *lod,
2663 extern void lustre_swab_lov_mds_md(struct lov_mds_md *lmm);
2666 extern void lustre_swab_llogd_body (struct llogd_body *d);
2667 extern void lustre_swab_llog_hdr (struct llog_log_hdr *h);
2668 extern void lustre_swab_llogd_conn_body (struct llogd_conn_body *d);
2669 extern void lustre_swab_llog_rec(struct llog_rec_hdr *rec,
2670 struct llog_rec_tail *tail);
2673 extern void lustre_swab_lustre_cfg(struct lustre_cfg *lcfg);
2675 /* Functions for dumping PTLRPC fields */
2676 void dump_rniobuf(struct niobuf_remote *rnb);
2677 void dump_ioo(struct obd_ioobj *nb);
2678 void dump_obdo(struct obdo *oa);
2679 void dump_ost_body(struct ost_body *ob);
2680 void dump_rcs(__u32 *rc);
2682 /* this will be used when OBD_CONNECT_CHANGE_QS is set */
2685 * ID appiles to (uid, gid)
2689 * LQUOTA_FLAGS_* affect the responding bits
2693 * acquire/release count (bytes for block quota)
2697 * when a master returns the reply to a slave, it will
2698 * contain the current corresponding qunit size
2704 #define QDATA_IS_GRP(qdata) ((qdata)->qd_flags & LQUOTA_FLAGS_GRP)
2705 #define QDATA_IS_BLK(qdata) ((qdata)->qd_flags & LQUOTA_FLAGS_BLK)
2706 #define QDATA_IS_ADJBLK(qdata) ((qdata)->qd_flags & LQUOTA_FLAGS_ADJBLK)
2707 #define QDATA_IS_ADJINO(qdata) ((qdata)->qd_flags & LQUOTA_FLAGS_ADJINO)
2708 #define QDATA_IS_CHANGE_QS(qdata) ((qdata)->qd_flags & LQUOTA_FLAGS_CHG_QS)
2710 #define QDATA_SET_GRP(qdata) ((qdata)->qd_flags |= LQUOTA_FLAGS_GRP)
2711 #define QDATA_SET_BLK(qdata) ((qdata)->qd_flags |= LQUOTA_FLAGS_BLK)
2712 #define QDATA_SET_ADJBLK(qdata) ((qdata)->qd_flags |= LQUOTA_FLAGS_ADJBLK)
2713 #define QDATA_SET_ADJINO(qdata) ((qdata)->qd_flags |= LQUOTA_FLAGS_ADJINO)
2714 #define QDATA_SET_CHANGE_QS(qdata) ((qdata)->qd_flags |= LQUOTA_FLAGS_CHG_QS)
2716 #define QDATA_CLR_GRP(qdata) ((qdata)->qd_flags &= ~LQUOTA_FLAGS_GRP)
2717 #define QDATA_CLR_CHANGE_QS(qdata) ((qdata)->qd_flags &= ~LQUOTA_FLAGS_CHG_QS)
2719 extern void lustre_swab_qdata(struct qunit_data *d);
2720 extern struct qunit_data *quota_get_qdata(void *req, int is_req, int is_exp);
2721 extern int quota_copy_qdata(void *request, struct qunit_data *qdata,
2722 int is_req, int is_exp);
2729 #define QUOTA_FIRST_OPC QUOTA_DQACQ
2731 #define QUOTA_REQUEST 1
2732 #define QUOTA_REPLY 0
2733 #define QUOTA_EXPORT 1
2734 #define QUOTA_IMPORT 0
2736 /* quota check function */
2737 #define QUOTA_RET_OK 0 /**< return successfully */
2738 #define QUOTA_RET_NOQUOTA 1 /**< not support quota */
2739 #define QUOTA_RET_NOLIMIT 2 /**< quota limit isn't set */
2740 #define QUOTA_RET_ACQUOTA 4 /**< need to acquire extra quota */
2743 /* security opcodes */
2746 SEC_CTX_INIT_CONT = 802,
2749 SEC_FIRST_OPC = SEC_CTX_INIT
2753 * capa related definitions
2755 #define CAPA_HMAC_MAX_LEN 64
2756 #define CAPA_HMAC_KEY_MAX_LEN 56
2758 /* NB take care when changing the sequence of elements this struct,
2759 * because the offset info is used in find_capa() */
2760 struct lustre_capa {
2761 struct lu_fid lc_fid; /** fid */
2762 __u64 lc_opc; /** operations allowed */
2763 __u64 lc_uid; /** file owner */
2764 __u64 lc_gid; /** file group */
2765 __u32 lc_flags; /** HMAC algorithm & flags */
2766 __u32 lc_keyid; /** key# used for the capability */
2767 __u32 lc_timeout; /** capa timeout value (sec) */
2768 __u32 lc_expiry; /** expiry time (sec) */
2769 __u8 lc_hmac[CAPA_HMAC_MAX_LEN]; /** HMAC */
2770 } __attribute__((packed));
2772 extern void lustre_swab_lustre_capa(struct lustre_capa *c);
2774 /** lustre_capa::lc_opc */
2776 CAPA_OPC_BODY_WRITE = 1<<0, /**< write object data */
2777 CAPA_OPC_BODY_READ = 1<<1, /**< read object data */
2778 CAPA_OPC_INDEX_LOOKUP = 1<<2, /**< lookup object fid */
2779 CAPA_OPC_INDEX_INSERT = 1<<3, /**< insert object fid */
2780 CAPA_OPC_INDEX_DELETE = 1<<4, /**< delete object fid */
2781 CAPA_OPC_OSS_WRITE = 1<<5, /**< write oss object data */
2782 CAPA_OPC_OSS_READ = 1<<6, /**< read oss object data */
2783 CAPA_OPC_OSS_TRUNC = 1<<7, /**< truncate oss object */
2784 CAPA_OPC_OSS_DESTROY = 1<<8, /**< destroy oss object */
2785 CAPA_OPC_META_WRITE = 1<<9, /**< write object meta data */
2786 CAPA_OPC_META_READ = 1<<10, /**< read object meta data */
2789 #define CAPA_OPC_OSS_RW (CAPA_OPC_OSS_READ | CAPA_OPC_OSS_WRITE)
2790 #define CAPA_OPC_MDS_ONLY \
2791 (CAPA_OPC_BODY_WRITE | CAPA_OPC_BODY_READ | CAPA_OPC_INDEX_LOOKUP | \
2792 CAPA_OPC_INDEX_INSERT | CAPA_OPC_INDEX_DELETE)
2793 #define CAPA_OPC_OSS_ONLY \
2794 (CAPA_OPC_OSS_WRITE | CAPA_OPC_OSS_READ | CAPA_OPC_OSS_TRUNC | \
2795 CAPA_OPC_OSS_DESTROY)
2796 #define CAPA_OPC_MDS_DEFAULT ~CAPA_OPC_OSS_ONLY
2797 #define CAPA_OPC_OSS_DEFAULT ~(CAPA_OPC_MDS_ONLY | CAPA_OPC_OSS_ONLY)
2799 /* MDS capability covers object capability for operations of body r/w
2800 * (dir readpage/sendpage), index lookup/insert/delete and meta data r/w,
2801 * while OSS capability only covers object capability for operations of
2802 * oss data(file content) r/w/truncate.
2804 static inline int capa_for_mds(struct lustre_capa *c)
2806 return (c->lc_opc & CAPA_OPC_INDEX_LOOKUP) != 0;
2809 static inline int capa_for_oss(struct lustre_capa *c)
2811 return (c->lc_opc & CAPA_OPC_INDEX_LOOKUP) == 0;
2814 /* lustre_capa::lc_hmac_alg */
2816 CAPA_HMAC_ALG_SHA1 = 1, /**< sha1 algorithm */
2820 #define CAPA_FL_MASK 0x00ffffff
2821 #define CAPA_HMAC_ALG_MASK 0xff000000
2823 struct lustre_capa_key {
2824 __u64 lk_seq; /**< mds# */
2825 __u32 lk_keyid; /**< key# */
2827 __u8 lk_key[CAPA_HMAC_KEY_MAX_LEN]; /**< key */
2828 } __attribute__((packed));
2830 extern void lustre_swab_lustre_capa_key(struct lustre_capa_key *k);
2832 /** The link ea holds 1 \a link_ea_entry for each hardlink */
2833 #define LINK_EA_MAGIC 0x11EAF1DFUL
2834 struct link_ea_header {
2837 __u64 leh_len; /* total size */
2843 /** Hardlink data is name and parent fid.
2844 * Stored in this crazy struct for maximum packing and endian-neutrality
2846 struct link_ea_entry {
2847 /** __u16 stored big-endian, unaligned */
2848 unsigned char lee_reclen[2];
2849 unsigned char lee_parent_fid[sizeof(struct lu_fid)];
2851 }__attribute__((packed));
2853 /** fid2path request/reply structure */
2854 struct getinfo_fid2path {
2855 struct lu_fid gf_fid;
2860 } __attribute__((packed));
2862 void lustre_swab_fid2path (struct getinfo_fid2path *gf);
2864 extern void lustre_swab_kuch(struct kuc_hdr *);