1 .TH lfs 1 "2008 Mar 15" Lustre "user utilities"
3 lfs \- Lustre utility to create a file with specific striping pattern, find the striping pattern of exiting files
8 .B lfs check <mds|osts|servers>
10 .B lfs df [-i] [-h] [path]
12 .B lfs find [[!] --atime|-A [-+]N] [[!] --mtime|-M [-+]N]
13 \fB[[!] --ctime|-C [-+]N] [--maxdepth|-D N] [--name|-n pattern]
14 \fB[--print|-p] \fB[--print0|-P] [--obd|-O <uuid[s]>]
15 \fB[[!] --size|-S [-+]N[kMGTPE]] [--type |-t {bcdflpsD}]
16 \fB[[!] --gid|-g N] [[!] --group|-G <name>]
17 \fB[[!] --uid|-u N] [[!] --user|-U <name>]
18 \fB<dirname|filename>\fR
22 .B lfs getstripe [--obd|-O <uuid>] [--quiet|-q] [--verbose|-v]
23 \fB[--recursive|-r] <dirname|filename>\fR
25 .B lfs setstripe [--size|-s stripe-size] [--count|-c stripe-cnt]
26 \fB[--offset|-o start-ost] [--pool|-p pool-name]
29 .B lfs setstripe -d <dir>
31 .B lfs poollist <filesystem>[.<pool>] | <pathname>
33 .B lfs quota [-v] [-o obd_uuid] [-u|-g] <username|groupname> <filesystem>
35 .B lfs quota <filesystem>
37 .B lfs quota -t [-u|-g] <filesystem>
39 .B lfs quotacheck [-ug] <filesystem>
41 .B lfs quotachown [-i] <filesystem>
43 .B lfs quotaon [-ugf] <filesystem>
45 .B lfs quotaoff [-ug] <filesystem>
47 .B lfs quotainv [-ug] [-f] <filesystem>
49 .B lfs setquota [-u|--user|-g|--group] <username|groupname>
50 \fB[--block-softlimit <block-softlimit>]
51 \fB[--block-hardlimit <block-hardlimit>]
52 \fB[--inode-softlimit <inode-softlimit>]
53 \fB[--inode-hardlimit <inode-hardlimit>]
56 .B lfs setquota [-u|--user|-g|--group] <username|groupname>
57 \fB[-b <block-softlimit>] [-B <block-hardlimit>]
58 \fB[-i <inode-softlimit>] [-I <inode-hardlimit>]
61 .B lfs setquota -t [-u|-g]
62 \fB[--block-grace <block-grace>]
63 \fB[--inode-grace <inode-grace>]
66 .B lfs setquota -t [-u|-g]
67 \fB[-b <block-grace>] [-i <inode-grace>]
73 can be used to create a new file with a specific striping pattern, determine the default striping pattern, gather the extended attributes (object numbers and location) for a specific file, find files with specific attributes, list OST information, or set quota limits. It can be invoked interactively without any arguments or in a non-interactive mode with one of the arguements supported.
75 The various options supported by lctl are listed and explained below:
78 Display the status of MDS or OSTs (as specified in the command) or all the servers (MDS and OSTs)
81 Report filesystem disk space usage or inodes usage of each MDT/OST.
84 To search the directory tree rooted at the given dir/file name for the files that match the given parameters: \fB--atime\fR (file was last accessed N*24 hours ago), \fB--ctime\fR (file's status was last changed N*24 hours ago), \fB--mtime\fR (file's data was last modified N*24 hours ago), \fB--obd\fR (file has an object on a specific OST or OSTs), \fB--size\fR (file has size in bytes, or \fBk\fRilo-, \fBM\fRega-, \fBG\fRiga-, \fBT\fRera-, \fBP\fReta-, or \fBE\fRxabytes if a suffix is given), \fB--type\fR (file has the type: \fBb\fRlock, \fBc\fRharacter, \fBd\fRirectory, \fBp\fRipe, \fBf\fRile, sym\fBl\fRink, \fBs\fRocket, or \fBD\fRoor (Solaris)), \fB--uid\fR (file has specific numeric user ID), \fB--user\fR (file owned by specific user, numeric user ID allowed), \fB--gid\fR (file has specific group ID), \fB--group\fR (file belongs to specific group, numeric group ID allowed). The option \fB--maxdepth\fR limits find to decend at most N levels of directory tree. The options \fB--print\fR and \fB--print0\fR print full file name, followed by a newline or NUL character correspondingly. Using \fB!\fR before an option negates its meaning (\fIfiles NOT matching the parameter\fR). Using \fB+\fR before a numeric value means \fIfiles with the parameter OR MORE\fR, while \fB-\fR before a numeric value means \fIfiles with the parameter OR LESS\fR.
87 List all the OSTs for the filesystem
90 To list the striping info for a given filename or files in a directory, optionally recursively, for all files in a directory tree: \fB--quiet\fR (don't print object IDs), \fB--verbose\fR (print striping parameters), \fB--recursive\fR (recurse into subdirectories).
92 .B setstripe [--size stripe-size] [--count stripe-cnt]
93 \fB[--offset start-ost] [--pool pool-name]\fR
95 To create a new file, or set the directory default, with the specified striping parameters. The
97 is the number of OSTs to stripe a file over. A
99 of 0 means to use the filesystem-wide default stripe count (default 1), and a
101 of -1 means to stripe over all available OSTs. The
103 is the number of bytes to store on each OST before moving to the next OST. A
105 of 0 means to use the filesystem-wide default stripe size (default 1MB). The
107 is the OST index (base 10, starting at 0) on which to start striping for this file. A
109 of -1 allows the MDS to choose the starting index and it is strongly recommended, as this allows space and load balancing to be done by the MDS as needed. The
111 is the name of a predefined pool of OSTs (see
113 ) that will be used for striping. The
114 .I stripe-count, stripe-size, start-ost
115 will be used as well; the
117 must be part of the pool or an error will be returned.
120 Delete the default striping on the specified directory.
122 .B poollist <filesystem>[.<pool>] | <pathname>
123 List the pools in \fBfilesystem\fR or \fBpathname\fR, or the OSTs in \fBfilesystem.pool\fR
126 To change files' owner and group on OSTs of the specified filesystem
128 .B quotacheck [-ugf] <filesystem>
129 To scan the specified filesystem for disk usage, and create or update quota files. Options specify quota for users (-u) groups (-g) and force (-f)
131 .B quotaon [-ugf] <filesystem>
132 To turn filesystem quotas on. Options specify quota for users (-u) groups (-g) and force (-f)
134 .B quotaoff [-ugf] <filesystem>
135 To turn filesystem quotas off. Options specify quota for users (-u) groups (-g) and force (-f)
137 .B quotainv [-ug] [-f] <filesystem>
138 Clear quota files (administrative quota files if used without -f, operational quota files otherwise), all of their quota entries, for (-u) users or (-g) groups; after quotainv one must use quotacheck before using quotas. DO NOT USE THIS COMMAND UNLESS YOU REALLY KNOW WHAT IT DOES. IT IS MAINLY FOR INTERNAL PURPOSES.
140 .B setquota [-u|-g] <name> [--block-softlimit <block-softlimit>] [--block-hardlimit <block-hardlimit>] [--inode-softlimit <inode-softlimit>] [--inode-hardlimit <inode-hardlimit>] <filesystem>
141 To set filesystem quotas for users or groups. Limits can be specified with -b, -k, -m, -g, -t, -p suffixes which specify units of 1, 2^10, 2^20, 2^30, 2^40 and 2^50 accordingly. Block limits unit is kilobyte (1024) by default and block limits are always kilobyte-grained (even if specified in bytes), see EXAMPLES
143 .B setquota -t [-u|-g] [--block-grace <block-grace>] [--inode-grace <inode-grace>] <filesystem>
144 To set filesystem quota grace times for users or groups. Grace time is specified in "XXwXXdXXhXXmXXs" format or as an integer seconds value, see EXAMPLES
146 .B quota [-v] [-o obd_uuid] [-u|-g] <username|groupname> <filesystem>
147 To display disk usage and limits, either for the full filesystem, or for objects on a specific obd. A user or group name can be specified. If both user and group are omitted quotas for current uid/gid are shown. -v provides more verbose (with per-obd statistics) output.
149 .B quota -t [-u|-g] <filesystem>
150 To display block and inode grace times for user (-u) or group (-g) quotas
153 Provides brief help on the various arguments
156 Quit the interactive lfs session
159 .B $ lfs setstripe -s 128k -c 2 /mnt/lustre/file1
160 This creates a file striped on two OSTs with 128kB on each stripe.
162 .B $ lfs setstripe -d /mnt/lustre/dir
163 This deletes a default stripe pattern on dir. New files will use the default striping pattern created therein.
165 .B $ lfs getstripe -v /mnt/lustre/file1
166 Lists the detailed object allocation of a given file
168 .B $ lfs find /mnt/lustre
169 Efficiently lists all files in a given directory and its subdirectories
171 .B $ lfs find /mnt/lustre -mtime +30 -type f -print
172 Recursively list all regular files in given directory more than 30 days old
174 .B $ lfs find --obd OST2-UUID /mnt/lustre/
175 Recursively list all files in a given directory that have objects on OST2-UUID.
177 .B $ lfs check servers
178 Check the status of all servers (MDT, OST)
184 Lists space usage per OST and MDT in human readable format.
187 Lists inode usage per OST and MDT
189 .B $ lfs quotachown -i /mnt/lustre
190 Change file owner and group
192 .B $ lfs quotacheck -ug /mnt/lustre
193 Quotacheck for user and group - will turn on quotas after making the check.
195 .B $ lfs quotaon -ug /mnt/lustre
196 Turn quotas of user and group on
198 .B $ lfs quotaoff -ug /mnt/lustre
199 Turn quotas of user and group off
201 .B $ lfs setquota -u bob --block-softlimit 2000000 --block-hardlimit 1000000 /mnt/lustre
202 Set quotas of user `bob': 1GB block quota hardlimit and 2 GB block quota softlimit
204 .B $ lfs setquota -t -u --block-grace 1000 --inode-grace 1w4d /mnt/lustre
205 Set grace times for user quotas: 1000 seconds for block quotas, 1 week and 4 days for inode quotas
207 .B $ lfs quota -u bob /mnt/lustre
208 List quotas of user `bob'
210 .B $ lfs quota -t -u /mnt/lustre
211 Show grace times for user quotas on /mnt/lustre
213 The \fBlfs find\fR command isn't as comprehensive as \fBfind\fR(1).
214 Report bugs using http://bugzilla.lustre.org.
216 The lfs command is part of the Lustre filesystem. Contact http://www.lustre.org/